- 10' coated high - strength tensile wire
- 10mm male stud connection to mats
- Ring-style termination for connecting to ground point
- 1 Met ohm resistor
Call us (630) 675-4509
Show
Filter by
Filter by
Filter by
ACL 880 Digital Electronic Megohmmeter ESD Resistance | Resistivity | Very High +/- 2% Precision Acc...
$1,795.00-
Why 880 Megohmmeter?
- High Performance Digital Megohmeter Kit
- Alphanumeric LCD scale shows precise value
- Resistance range: 10³ - 10¹² ohms
- Test voltage range:
- <10 volt variable: 10³ - 9.9x103 ohms
- 10 volt ± 0.5 volts: 1.0x104 - 9.9x105 ohms
- 100 volt ± <5 volts: 1.0x10⁶ - 9.9x1012 ohms
- Accuracy:
- 10³ - 10¹⁰ ohms: < ± 2%, ± 2 counts
- 10¹¹ - 10¹² ohms: < ± 10%, ± 4 counts
- Made in USA
- Ideal for testing according to ESDA test methods
- Includes calibration certificate traceable to NIST
- Includes 1 year mfg warranty
1007 Polyurea Coating Fast Set Waterproof Elastomeric Spray | Flexible 600%+ Elongation | 10-30 Seco...
From: $160.00- 100% Pure Polyurea Waterproof Spray Coating
- Fast 10-30 Sec Set Time - Quick Back In-Service
- Flexible Elastomeric Spray 600%+ Elongation
- Excellent Chemical, Abrasion Impact Resistance
- Unlimited mil/coat & unlimited recoat window
- Use on Concrete, Metal, Wood
- Good for Garages, Marine Environments, Secondary Containment, Industrial Applications
- REQUIRES Graco Reactor Series Polyurea Heated Spray Type Pump
10R ESD Anti-Static Primer Concrete Moisture Sealer
From: $225.00- Clear Primer / Sealer Protects Against Moisture Damage Prior to Applying ESD Floor Coatings
- Vertical and Horizontal Applications
- Penetrating Formula
- 100% Vapor Permeable
- Water Based
- Use With 4700SS ESD Anti-Static Floor Paint
10x Polyurea Interior Control Joint Filler | Quick Cure | Cold Temperature Apply Down To 0F
From: $52.00- Quick Back in Service
- Ideal for High Speed Application using Machine Dispensing System or for small projects easy application using twin cartridge kits and 300 ml x 300 ml cartridge kits
- High Shore Hardness for superior protection and support to joint edges
- Cold Application down to 0F
- Rapid curing
- Semi-Rigid polyurea
- Great for industrial floor
- Chemical Resistant
- Flexible in Cold Temperatures
- 100% Solids, No VOC
14” Heavy Duty Floor Scraper For Flake Removal and Stubborn Substances
$80.00- All steel construction, painted to prevent rusting
- 5' tubular steel handle
- Powder coated handle
- Removes wide variety of stubborn substances including glue and adhesives from floor
- Great for removing excess chips and flakes from basecoat prior to topcoat application on floor coating project
18″ Notched Floor Squeegee For Epoxy, Polyaspartic Floor | 4 Sizes | Case of 6
$199.00- 18" Speed Squeegee For Uniform Material Spreading
- 4 Notch Sizes: 1/8", 3/16", 1/4", 3/8"
- Comes in Economical Case of 6 Squeegees
- For Quicker and Easier Application of thicker mil (thickness) floor coating systems
- A floor coating standard, just grab it,use it, and toss it or clean it
- Steel handle socket
- Features steel frame with gray rubber solvent resistant blade
- Note: requires optional threaded handle
18″ Roller Cover For Epoxy, Urethane, Polyaspartic Coatings | 4 Sizes | Case of 24
From: $230.00- Shed resistant woven fabric for a virtually lint free finish with all paints, enamels, primers, urethanes, and epoxies.
- 2x Quicker application than using 9" roller covers
- Available in 1/8", 1/4", 3/8" and 1/2" thick nap roller covers
- Economical Case of 24 roller covers
- White Fabric Nap Cover
- Phenolic Core
18″ Wooster Big Ben Roller Frame For Quick Application of Floor Coatings
$35.00- 18" Big Ben Roll Frame
- For 18" Roller Covers, 1-1/2" Standard Or 2-1/4" Jumbo Diameter
- Lightweight Yet Strong Polypropylene Construction
- Quickly Install Or Remove The Roller Cover
- For 18 Inch roller covers with 1 1/2 Inch standard or 2 1/4 Inch jumbo Diameter and can be used with all nap heights
- Lightweight yet strong polypropylene construction
- Quickly install or remove the roller cover no hardware to adjust no tools required
18″ Wooster Pro Doo Z Cover For Epoxy, Urethane, Polyaspartic Coatings | 6/Box | 2 Sizes
From: $72.00- Shed resistant woven fabric for a virtually lint free finish with all paints, enamels, primers, urethanes, and epoxies.
- Available in 3/8" and 3/4" thick nap roller covers
- Exclusive golden pinstripe design stays resilient, resists matting.
- Green double thick polypropylene core resists water, solvents, and cracking.
- Sold in Boxes of 6 Sleeves
18″ Wooster Sherlock Wide Boy Frame For Quick Application Epoxy, Urethane, Polyaspartic Coatin...
$49.95- Sherlock Wide Boy Frame
- Holds Roller Covers 12" To 18" Long With 1-1/2" Standard Or 2-1/4" Jumbo Diameter
- Extra Strength Steel Wing Nut Design
- Rigid Tubular Steel Frame Arms
- Adjusts to hold roller covers 12 Inch to 18 Inch long with 1 1/2 Inch standard or 2 1/4 Inch jumbo Diameter and can be used with all nap heights
- Extra strength wing nut design perfect for floors or other heavy duty applications
- Rigid tubular steel frame arms and a durable fiberglass reinforced nylon body
24″ Flat Floor Squeegee For Epoxy & Polyaspartic Coatings
$50.00- 24" Speed Squeegee
- For Quicker and Easier Application of thicker mil (thickness) floor coating systems
- A floor coating standard, just grab it,use it, and toss it or clean it
- Light weight, high performance, re-usable plastic floor squeegee
- Makes installing floors a breeze
- This Squeegee is the best for installing medium and heavy bodied resins
- Note: Pole not included
24″ Notched Floor Squeegee 3/16″ Deep For Epoxy & Polyaspartic Coatings
$50.00- 24" Speed Squeegee, 3/16" Notch, Threaded Handle Adapter
- For Quicker and Easier Application of thicker mil (thickness) floor coating systems
- A floor coating standard, just grab it,use it, and toss it or clean it
- This one has our own special twist, a threaded handle adapter
- Features an aluminum frame with a red rubber solvent resistant blade
- Note: requires optional threaded handle
24″ Notched Floor Squeegee For High Build Coating Systems | 1/2″ Notches | Case of 6
$199.00- 24" Speed Squeegee For Uniform Material Spreading
- Large 1/2" notches
- Comes in a Economical Case of 6 Squeegees
- For Quicker and Easier Application of thicker mil (thickness) floor coating systems
- A floor coating standard, just grab it,use it, and toss it or clean it
- Steel handle socket
- Features steel frame with gray rubber solvent resistant blade
- Note: requires optional threaded handle
3003 Polyurea Slow Set Interior Control Joint Filler | Low Temp -20°F
From: $176.00- Offers load transfer across control joints for good protection of edges
- Back-in-Service "Drive-Over" in 30 to 60 minutes
- Longer working time than the 3004 Fast Set Polyurea
- 5-8 Minute Gel Time @ 77°F
- Meets USDA Requirements for incidental food contact
- Stays Flexible In Extreme Cold
- Cold Applications down to -20°F (-29°C)
- Not Sensitive To Moisture
- Self-leveling
- High Impact Resistance
- Excellent Abrasion Resistance
- Chemical Resistant
- Apply using dual component pump, 300 ml x 300 ml cartridge kit or hand application (small projects)
- 100% Solids, No VOC, No Odor
3004 Polyurea Fast Set Interior Control Joint Filler | Low Temp -20°F
From: $176.00- Quick Back-in-Service "Drive-Over" in only 20-30 minutes
- Offers load transfer across control joints for good protection of edges
- Ideal for High Speed Application using Machine Dispensing System or for small projects easy application using twin cartridge kits and 300 ml x 300 ml cartridge kits (total 21 oz or 600 ml per cartridge kit)
- Tack Free only 2-3 minutes
- Meets USDA Requirements for incidental food contact
- Stays Flexible In Extreme Cold with 300% Elongation
- Cold Applications down to -20°F (-29°C)
- Not Sensitive To Moisture
- Non-Flammable
- Self-leveling
- High Impact Resistance
- Excellent Abrasion Resistance
- Chemical Resistant
- 100% Solids, No VOC, No Odor
3246 Polyurea Flexible Expansion Joint Filler | Quick Cure | Exterior Interior | Low Temp -20°F | El...
From: $99.99- Quick 30 Min Back In-Service Joint Repair
- Extremely Flexible 600%+ Elongation for extreme conditions
- Abrasion, Chemical and Fuel Resistant
- Great for Concrete Driveways, Parking Garages, Bridges, Warehouses
- Outdoor control joint & all expansion joints
- 100% Solids, Self leveling
- Apply using High Speed Machine Application and for small projects easy application using twin cartridge kits and 300 ml x 300 ml cartridge gun
- Cold Application Down to -20°F (-26°C)
***2-3 WEEK LEAD TIME BEFORE SHIPPING. PLEASE CALL 630.675.4509 FOR SPECIFICS****
4000 Acrylic Static Dissipative Clear Floor Finish
From: $290.00- Acrylic Clear Static Dissipative Floor Finish
- Use on Vinyl, Linoleum, or Ceramic Tile
- Strip Cycle to 12 mos
- Abrasion Resistant, Water Base, Low VOC
- UL Listed Slip Resistant and ANSI S20.20-2007
- Great For Electronics, Medical, ESD Protected Areas
4010 Acrylic ESD Floor Stripper Concentrate
From: $250.00- Prepare Floors to Apply Acrylic Floor Finishes
- Removes Multiple Coats
- Neutral Cleaning Not Required
- Low Foaming
- For Electronics Mfg, Assembly, ESD Protected Areas
- Biodegradeable, Water Base, Low VOC
4018 Acrylic Dissipative Floor Finish
From: $260.00- Lowers resistivity & Return Floors to Safe Spec
- Restores Floor Gloss
- Lengthens Maintenance Cycle
- Meets ANSI S20.20-2007
- Removes Black Heel Marks & Easily Buffed
- Non-toxic, Biodegradeable Concentrate (10:1 ratio)
4020 ESD Neutralizer Cleaner Concentrate
From: $200.00- Great Anti-Static Neutralizer Cleaner
- For Concrete, Tile, Metal, Glass, Porecain
- Economical Concentrate 128:1
- Biodegradeable and Safe for Sewage Septic Systems
- Low Foam
- Non-Abrasive, No Streaking or Film Forming
4030 ESD Neutralizer Cleaner Ready-to-Use
From: $90.00- Great Anti-Static Neutralizer Cleaner
- For Concrete, Tile, Metal, Glass, Porecain
- Ready-to-Use
- Biodegradeable and Safe for Sewage Septic Systems
- Low Foam
- Non-Abrasive, No Streaking or Film Forming
4040 Universal Cleaner Concentrate | Use on Electronic Manufacturing, ESD Floor, Concrete Floor | De...
From: $200.00- Powerful degreaser
- Safe for ESD tile, epoxy and paint
- Neutral pH
- No phosphate, ammonia or bleach
- Dilution ratio 5:1 (5 parts water to 1 part cleaner)
- Covers approximately 5000 square feet per diluted gallon
4100 ESD Restorer | Cleaner Concentrate
From: $282.00- Lowers resistivity & Return Floors to Safe Spec
- Restores Floor Gloss
- Lengthens Maintenance Cycle
- Meets ANSI S20.20-2007
- Removes Black Heel Marks & Easily Buffed
- Non-toxic, Biodegradeable Concentrate (10:1 ratio)
4400 ESD Polyurethane Anti-Static Floor & Wall Paint | ANSI/ESD S20.20 | Zero VOC | Reinforcing...
From: $390.00- Provides 100% anti-static control, even at low levels of humidity
- Conforms to ANSI/ESD S20.20-2020 when tested according to ANSI/ESD STM7.1
- Static dissipative: 105 to 108 ohms
- Water based with Zero VOC- 0 g/L
- High physical durability with reinforcing fibers
- Resists yellowing and UV color fading.
- Easy soap and water cleanup.
- Designed for concrete, wood, drywall and previously painted surfaces
- Available with Satin Finish in a Medium Gray and Dark Gray color
- Withstands alcohol, oil, gasoline and most common electronic chemicals
- Biodegradeable - Non-hazardous | Non-flammable
4600 Ultra Static Dissipative Clear Urethane Floor Finish
From: $330.00- Abrasion Resistant Urethane Enhanced Finish
- Use on Vinyl, Linoleum, or Ceramic Tile Floors
- Increase Strip Cycle to 24 Mos
- Meets ANSI S20.20-2007
- UL Listed Slip Resistant
- Great For Electronics, Medical, ESD Protected Areas
4800 Ultra II Static Dissipative Clear Urethane Floor Finish
From: $350.00- Abrasion Resistant Urethane Enhanced Finish
- For Concrete, Epoxy, ESD epoxy, Dissipative Tile
- Increase Strip Cycle to 24 Mos
- Meets ANSI S20.20-2007
- UL Listed Slip Resistant
- Great For Electronics, Medical, ESD Protected Areas
4G Surface Guard: Walls & Floors | Advanced Protection | Easy Application | Fast Drying
From: $150.00- Advanced Protection: Safeguard surfaces against water and oil with hydrophobic and oleophobic properties.
- Easy Application: Apply effortlessly using a brush, roller, airless sprayer, or pump sprayer.
- Fast Drying: Achieve quick results with a fast drying time.
- Invisible Finish: Maintain the natural appearance of surfaces without altering their friction or slip resistance.
- Environmentally Friendly: Water-based formula with no solvents or VOCs, ensuring no unpleasant odors.
- Longevity: Enjoy up to 10 years of protection under suitable conditions.
- Versatile Use: Ideal for a variety of mineral substrates, ensuring vapor permeability without compromising surface integrity.
5 Quart Measuring Bucket For Epoxy, Polyaspartic, Urethane Coatings | Box of 10
From: $46.00- 5 quart size for smaller projects
- semi-transparent tub with visible quart and liter calibrations for easy mixing/measuring
- Solvent resistant, reusable and recyclable
- Sold in bundles of 10
- Also available with snap-on plastic lids
5″ Concrete Pro Hand Grinder Kit | Metabo WEV-125 Quick HT | Dust Shroud and (1) 9 Segment Whe...
From: $47.00- Hand-held units that are great for smaller jobs or in combination with walk-behind grinders on larger projects
- Use on concrete for cleaning, leveling high spots or uneven floor surfaces, removing glues, mastic, epoxies and other coatings
- May be connected to a variety of dust collection systems for dust containment
- The unit’s polyurethane dust shroud is long lasting and is offered in full shrouds and convertible models that flip up to allow for edge work along walls
- Kit include electric grinder, dust shroud (full or convertible) (1) 9 Segment Diamond Turbo Cup Arbor Wheel and hardware for mounting threaded diamond cup wheels, ZEC wheels, or polishing pads
Hot
5500 Polyaspartic Polyurea Coating Roll Down Low Temp 30°F | 87% Solids | 17 Colors | Flexible 120% ...
From: $235.00- Beautiful Decorative High Gloss Appearance
- Cold Temperature Application to 30F using Fast Set
- Hot and Humid Conditions 100F+ using HHHH version
- 17 colors and clear available
- Long Working time option to 35 minutes
- Highly Adhesive, Flexible 120% elongation & Non-Brittle
- Waterproof, Aliphatic Resists UV Non-Yellowing
- Indoor & Outdoor Floor and Countertop Projects
- Submerged Service Projects Like Pools & Fountains
- Works well on concrete, brick, steel, wood, fiberglass
- Excellent Chemical & Abrasion Resistance
- Optional Fast or Slow Set and 3 High Heat & Humidity options
- Great For Garage Floors Using Chips & Flakes
- Commercial and Industrial Applications
- Use as Stand Alone System or Topcoat to Epoxy
- Easy Squeegee/Roller Application
Hot
5500HS 100% Solids Polyaspartic Polyurea Coating Roll Down | Low Temp 30°F | Flexible 120% Elongatio...
From: $375.00- Beautiful Clear HIGH GLOSS Appearance
- 100% Solids For Thick 1 Coat Coverage Full Flake, Quartz, Silica Sand Systems to 16 mils DFT (100 sq'/gallon)
- Quick 24 hour back in-service (at 75F)
- Waterproofing Elastomeric Systems
- Good In Submerged Service Projects Like Fountains
- Works well on concrete, brick, steel, wood, fiberglass
- Outstanding Chemical Resistant
- Excellent Abrasive Resistance
- Excellent flexibility with 120% Elongation
- Highly Adhesive
- Excellent Non-Yellowing UV Resistance For Very Clear Finish
- Conforms to the USDA requirements for incidental food contact
- Polyurea performance in an easy to apply roll down formula. Read: basic installation guidelines
Hot
5500M Matte Finish Polyaspartic Polyurea Coating Roll Down | Low Temp 30°F | 89% Solids | Flexible 1...
From: $250.00- Beautiful Clear MATTE FINISH Appearance
- Cold Temperature Application to 30F
- Quick 1 to 2 hr recoat & 24 hr back in-service (at 75F)
- Highly Adhesive, Flexible 120% elongation & Non-Brittle
- Waterproof, Aliphatic Resists UV Non-Yellowing
- Indoor & Outdoor Floor and Countertop Projects
- Submerged Service Projects Like Pools & Fountains
- Works well on concrete, brick, steel, wood, fiberglass
- Excellent Chemical & Abrasion Resistance
- Great For Garage Floors Using Chips & Flakes
- Commercial and Industrial Applications
- Easy Squeegee/Roller Application
6007 Wet Condition Epoxy For Concrete & Steel | Low Temp 35°F | 100% Solids
From: $543.00- Protect Problem Wet and Damp Areas
- Withstands to 15-18 PSI Hydraulic Vapor Pressure
- Cold temperature down to 35°F
- Designed to Protect both Concrete and Steel
- Use as Primer With Topcoat or Floor Coating
- Offers Excelllent Moisture and Corrosive Protection with Outstanding Adhesion
- 100% Solids, no VOC, 2 Component
Hot
6009 Epoxy Floor Coating Industrial & Commercial Low Temp 35°F | 100% Solids | 17 Colors | Quic...
From: $255.00- Commercial, Industrial, Residential Concrete Floors
- Cold temperature down to 35°F
- Tough - Attractive Looking Epoxy
- Good Chemical, Abrasion, Impact Resistance
- Quick 4 to 7 hour set time
- Self Priming With No Primer Required
- 100% Solids, no VOC, 2 Component
- Clear or Selection of 17 Colors
- Excellent Protection at Lower Cost
6210 ESD Polycoat Anti-Static Floor Paint | Dissipative | Clear | ANSI/ESD S20.20-2014
From: $140.00- Suitable for dissipative packaging outlined in ANSI/ESD S20.20
- Resistance: 10e6-10e9 ohms/sq when tested to ANSI/ESD STM11.11 88
- Dissipative Coating
- Water-based polyurethane with zero VOC
- Reduces tribocharging
- Coverage: 200-250 square feet per gallon
- High durability
- Translucent with a suspension of opaque blueish-grey conductive particles
- For plastics, concrete, unfinished wood, or tile (multi-surface compatible)
- Made in the USA
6700 Premium ESD Static Dissipative Anti-Static Floor Paint | 9 Colors | ANSI/ESD S20.20-2014
From: $384.00- Static dissipative 10e7 - 10e9 ohms
- Conforms to ANSI/ESD S20.20-2014 when tested according to ANSI/ESD STM7.1
- No hot spots
- Excellent adhesion and color retention
- Good resistance to abrasion, oils and washing
- Use on Concrete, Wood, Metal surfaces
- Interior or exterior use
- Non-hazardous, Non-Flammable, low VOC
- Low gloss sheen
- 9 In-Stock Colors, Custom Colors Available
6700C Premium ESD Static Conductive Anti-Static Floor Paint | 3 Colors | ANSI/ESD S20.20-2014
From: $425.00- Static Conductive 10e3 - 10e6 ohms
- Conforms to ANSI/ESD S20.20-2014 when tested according to ANSI/ESD STM7.1
- No hot spots
- Excellent adhesion and color retention
- Good resistance to abrasion, oils and washing
- Use on Concrete, Wood, Metal surfaces
- Interior or exterior use
- Non-hazardous, Non-Flammable, low VOC
- Low gloss sheen
- 3 Colors Available - Light Gray, Dark Gray, Black
7″ Concrete Pro Hand Grinder Kit | Metabo W24-230 | Dust Shroud | (2) 12 Segment Wheels | Loop...
$640.00- Hand-held units that are great for smaller jobs or in combination with walk-behind grinders on larger projects
- Use on concrete for cleaning, leveling high spots or uneven floor surfaces, removing glues, mastic, epoxies and other coatings
- May be connected to a variety of dust collection systems for dust containment
- The unit’s polyurethane dust shroud is long lasting and is offered in full shrouds and convertible models that flip up to allow for edge work along walls
- Kit include electric grinder, dust shroud (full or convertible), (2) diamond cup grinding wheels and hardware for mounting threaded diamond cup wheels, ZEC wheels, or polishing pads
7001 Polyurethane Primer Concrete & Steel | Quick Cure | Exceptional Adhesion | Low 35F Temp
From: $80.00- Concrete & Steel Primer For Epoxy, Urethane, Polyaspartic, Polyurea Coatings
- Cross-links With Polyurea, EPDM Roofing and other Plastic Materials Difficult to Bond to
- Deep Penetrating Exceptional 1200 psi Adhesion
- Superior Corrosion, Abrasion and Water Resistance
- For Use in Submerged Service Applications
- Quick 1 hr recoat (based on temp & humidity)
- Semi-flexible & impact resistance
- Reduced concrete outgassing problems
- Moisture Cured easy to use 1 Component
- Wide application range 35°F - 125°F (1.7°C - 52°C)
- Available in black and non-pigmented clear (h0ney comb color).
8″ x .125″ x 7/8″ Tiger Tooth Blade
$150.00- Flat profile for less tool marks on the concrete
- Softer blades for better performance on hard concrete
- 12 segments for longer life
- 30/40 grit great for both removing existing coatings and roughing up concrete for typical garage, basement and patio floor projects
- For use with 7" grinders containing a threaded arbor
8″ x .250″ x 7/8″ Premium Concrete Blade
$175.00- Flat profile for less tool marks on the concrete
- Softer blades for better performance on hard concrete
- 12 segments for longer life
- 30/40 grit great for both removing existing coatings and roughing up concrete for typical garage, basement and patio floor projects
- For use with 7" grinders containing a threaded arbor
800 Slow Set Polyurea Adhesive Sealant & Caulk
$500.00- Self Leveling, Tough, Flexible, Sandable, Paintable
- Chemical and Fuel Resistant Polyurea
- Repair Concrete Cracks
- Seals Plastic Connectors and Fittings
- For Metals, Plastics, Fiberglass, Steel, Wood, Urethane, Polyurea, Concrete
- 100% Solids, no VOC, 2 Component
- Option for easy application using twin cartridge kits and 300 ml x 300 ml cartridge gun
8090 Mat Grounding Cord for ESD Floor Mats
$25.00
830 Fast Set Polyurea Repair | Joint Sealant | Caulk | Adhesive | No Sag Walls | Concrete | Steel | ...
From: $146.00- Tough, Flexible, Fast Set, Sandable, Paintable
- Bonds to Concrete, Steel, Wood, Plastic, Fiberglass, Polyurea, Urethane
- Repair Concrete Floors & Walls - Holds Vertical Bead
- Chemical and Fuel Resistant Polyurea
- Cold weather application down to -20F
- Seal Plastic Connectors, Fittings
- Quick, Easy, Effective Repair of Concrete Cracks
- 3 Set Times Hard in 10 min, 15-20 min, 30-40 min
- 100% Solids, no VOC, 2 Component
- Option for easy application using twin cartridge kits and 300 ml x 300 ml cartridge gun
9″ Roller Cover For Epoxy, Urethane, Polyaspartic Coatings | 4 Sizes | Case of 36
From: $180.00- Shed resistant woven fabric for a virtually lint free finish with all paints, enamels, primers, urethanes, and epoxies.
- Available in 1/8", 1/4", 3/8" and 1/2" thick nap roller covers
- Economical case of 36 Roller Covers
- White Fabric Nap Cover
- Phenolic Core
- Sold in Boxes of 10 Sleeves
9″ Roller Frame For Epoxy, Urethane, Polyaspartic Coatings | Case of 12
$70.00- 9" Economical Roller Frame
- Sturdy 5 Wire Cage Plastic Endcaps
- Chrome Plated 5/16" Shank
- Plastic Threaded Grip For Extension Pole Use
- Sturdy 5 wire cage and plastic endcaps
- Chrome plated 5/16 inch shank
- Plastic threaded grip for extension pole use
9″ Wooster Pro Doo Z Roller Cover For Epoxy, Urethane, Polyaspartic Coatings | 12/box | 2 Size...
From: $60.00- Shed resistant woven fabric for a virtually lint free finish with all paints, enamels, primers, urethanes, and epoxies.
- Available in 3/8" and 3/4" thick nap roller covers
- Exclusive golden pinstripe design stays resilient, resists matting.
- Green double thick polypropylene core resists water, solvents, and cracking.
- Sold in Boxes of 12 Sleeves
9″ Wooster Roller Frame For Epoxy, Urethane, Polyaspartic Coatings
$24.50- 9" Acme Heavy Duty Roll Frame
- Sturdy 5 Wire Cage Plastic Endcaps
- Chrome Plated 5/16" Shank
- Plastic Threaded Grip For Extension Pole Use
- Sturdy 5 wire cage and plastic endcaps
- Chrome plated 5/16 inch shank
- Plastic threaded grip for extension pole use
AcrylicPoly DTM² Acrylic Modified Polyurethane WaterProofer & Primer | Flexible | Metal Concret...
From: $120.00- Excellent breathable waterproofing topcoat that offers a flexible, chemical resistant, non-yellowing film over painted and unpainted surfaces
- Great for use as direct to metal corrosion resistant primer over steel
- Primer for concrete, masonry, wood, plastic surfaces
- Scratch Resistant
- Non-yellowing & UV Resistant Topcoat
- Anti-Carbonation Protection
- Excellent as a protective floor coating in a wide variety of concrete flooring applications
- Breathable elastomeric outdoor waterproofer
- Comes in a clear, ready to use white and 3 tint bases for custom coloring
- Available in 4 gloss levels from matte, satin, semi-gloss to glossy
Advanced Waterproofer Multi-Surface 10 Yr Water Repellent
From: $20.00- Designed For Homeowners Wanting Superior Protection Against Moisture and Stains
- 10 Year Premium Water Sealer
- Unpainted Porous Concrete, Block, Brick, Wood, Stone
- Clear Finish, Will Not Yellow
- Water Base, Low VOC, Eco-Friendly
- Easy To Apply
AEROSIL R 202 Fumed Silica Thickening Agent For Epoxy Concrete Crack and Joint Repair | 22 lbs (10 k...
$575.00- Great thickening agent for use with wide range of epoxy, polyurethane and other coatings
- Allows coatings to be used as great concrete crack, hole, spall and control joint repair for larger projects
- When mixed into fast acting products, makes for very quick repairs
- Many other industrial uses
- Comes in 22 lb bags
****TRUCK FREIGHT SHIPPING ONLY - MIN ORDER 5 BAGS****
Aluminum Oxide Anti-Slip | BROWN | 3 Grit Sizes | Non-Skid Tough Durable Floor
From: $32.00- Adds very tough, durable skid resistance & texture profile to surface
- Epoxy, Polyaspartic, Urethane 2 component coatings
- Does not change physical properties of the coating
- Well bonded into the body of the coating
- Excellent in marine environments
- Variety of grit sizes from 24 coarse to 60 medium
- High hydrolitic stability
Aluminum Oxide Anti-Slip | WHITE | 4 Grit Sizes | Non-Skid Tough Durable Floor
From: $65.00- Adds very tough, durable skid resistance & texture profile to surface
- Epoxy, Polyaspartic, Urethane 2 component coatings
- Does not change physical properties of the coating
- Well bonded into the body of the coating
- Excellent in marine environments
- White color can be used with clear coatings and decorative floors using chips
- Variety of grit sizes from 16 extra coarse to 54 medium
- High hydrolitic stability
Aluminum Oxide High Wear Abrasion Resistant Additive | 220 Grit | 325 Grit for Urethane & Polya...
From: $31.00- Significantly improves abrasion resistance of floor coatings
- Helps create a tough, durable, abrasion resistant surface
- Simple and easy to add while mixing a coating
- Works with any urethane and thin film polyasprtic coating
- Works well with high performance 2 part floor coatings
- Does not change physical properties of the coating
- Well bonded into the body of the coating
- High hydrolitic stability
- White Color in options 220 grit and 325 grit
Anti-Graffiti UV Film Polycarbonate Acrylic | 25′ to 100′ Roll | 4 mil & 6 mil thic...
From: $446.25- Maximum Protection With a Tough Invisible Film For Polycarbonate and Acrylic Flat Surfaces
- Wipe-clean coating allows quick removal of most graffiti paint attacks
- Superior Strength 6 mil Film Prevents Damage from Razor Blade and Acid Attack
- Hassle Free & Quick-release adhesive for speedier film removal and replacement
- Innovative Technology for Completely Clean Removal with NO REMAINING RESIDUE
- Lets 88% of Visible Light Through
- Blocks 99% of UV Radiation
- 4 & 6 mil thick, 25' to 100′ Long, 60″ & 72" Wide rolls
- Two Custom cut widths available at no extra charge
Anti-Graffiti UV Glass Window Film | 25′ to 100′ Roll | 4 & 6 mil | 36″ to 72...
From: $152.25- Tough Invisible Protective Film For Glass Windows, Glass Doors & Glass Mirrors
- Wipe-clean coating allows quick removal of most graffiti paint attacks
- Superior Strength Film Prevents Damage from Razor Blade and Acid Attack
- Hassle Free & Quick-release adhesive for speedier film removal and replacement
- Innovative Technology for Completely Clean Removal with NO REMAINING RESIDUE
- Lets 90% of Visible Light Through
- Blocks 97% of UV Radiation
- 4 & 6 mil thick, 25', 50', 75' and 100′ Long and 36″, 48", 60" and 72″ Wide
- Custom cut widths available at no extra cost. Choose standard width and make up to 2 additional width cuts on same roll (put in notes how wide each cut desired).
Anti-Slip Glow Sand | Aqua, Blue & Green | Photoluminescent for Floor Coatings | Glows to 8+ Ho...
From: $38.00- Create anti-slip texture for a slip resistant floor surface with a great looking, long lasting green glow when lights are off
- Largest particle size green "Glow in the Dark Sand" at 30 grit (500 microns)
- Anti-Slip Glow Sand comes in Green (30 grit), Blue (65 grit) and Aqua (110grit)
- Brightest and longest lasting glow pigment
- Ideal for use with epoxies, polyaspartics, urethanes and polyurethanes
- Mix with clear epoxies and concrete sealers to create glow in the dark floors
- For use in both indoor and outdoor projects.
- Settles well to the bottom of cracks and grooves in glow in the dark tables and other wood projects when mixed with epoxy
- Creates an abrasive glow in the dark texture when applied in very thin layers
- Glow Sand Sample Kit Offered in all 3 colors
ARCRETE Epoxy Primer & Rebuild | Horizontal | Secondary Containment| Repair, Smooth or Level |1...
From: $80.00- Rebuild for Repair, Smoothing or leveling of Horizontal Areas
- Solvent and VOC free product
- Used in High Build Areas
- Chemically Resistant
- Rapid Turnaround
ARCTHANE Epoxy & Urethane Caulk | 500% Elongation | Expansion Joint Sealing & Crack Repair
From: $80.00- High elongation and elastomeric
- Flexible resilience
- Improved water & chemical resistance
- Strong Expansion Joint Sealing & Crack Repair
- 100% Solids
- Long Pot Life
Aspartic 100 High Build Polyaspartic for Concrete Floors | Low Temp 30°F | 100% Solids
From: $99.99- Tough, durable topcoat for interior epoxy floor coatings
- Very low to no odor great for sensitive odor indoor projects
- Can be used as high build topcoat up to 16 mils or 100 sq'/gallon
- Cold temperature application down to 30°F
- Excellent chemical and abrasion resistance
- UV Stable, Will Not Yellow
- Beautiful high gloss appearance
- Designed for high traffic and industrial areas
- High solids 100%
- Available clear & 12 colors (Pigment Sold Separate)
Aspartic 85 Polyaspartic Quick Cure Concrete Floor Coating | Low Temp 30°F
From: $79.50- Tough, durable topcoat for interior epoxy floor coatings
- Cold temperature application down to 30°F
- Fast Curing for quick 5-7 Hours Back in-Service Light Foot Traffic
- Excellent chemical and abrasion resistance
- UV Stable and will not yellow
- Beautiful high gloss appearance
- Designed for high traffic and industrial areas
- High solids 85%
- Available in clear & 12 colors (Colored Pigment Sold Separately)
Aspartic 85 Slow Set Polyaspartic Concrete Floor Coating | Low Temp 30°F | Low Odor Option
From: $99.99- Tough, durable topcoat for interior epoxy floor coatings
- Cold weather application down to 30°F
- Benefits of a Polyaspartic With Longer 45-60 minutes Working Times
- Excellent chemical and abrasion resistance
- UV Stable and will not yellow
- Beautiful high gloss appearance
- Designed for high traffic and industrial areas
- High solids 85%
- Available in clear & 14 colors (Colored Pigment Sold Separately)
- LOW ODOR version now available for indoor projects.
Bare Brick, Stone & Masonry Graffiti Remover | Highly Effective All Purpose Tag Removal | Biode...
From: $37.00- Highly effective biodegradable professional grade graffiti remover
- Great for porous concrete, brick, stone, wood as well as removing graffiti from tough split faced block, cinder block and exposed aggregate surfaces
- Safe and effective for use on all types of natural stone (such as limestone, granite, and marble), stainless steel, trees, plastics, and playground equipment
- Requires minimal rinsing and any resultant run-off is a readily biodegradable gray water soap that can be left to biodegrade, recycled or further diluted for use in gardens, etc.
- No shadows, damage or harsh scrubbing required
- Pleasant smelling and nontoxic.
- Removes graffiti on painted surfaces as well as natural building surfaces after first wetting surface with water.
Bio-Chem E330 High Performance Epoxy | 100% Solids | Aggressive Chemical Exposures | High Heat
From: $84.00- Down-Hole Tubular Coating: Id and OD coating, especially suitable for "Ruffcoat" OD treatment
- Tank Lining: High hydrocarbon chemical resistance and early return to service make Bio-Chem E330 an ideal high build tank lining
- Hopper Car Lining: excellent physical and chemical resistance properties
- Concrete Containment: Excellent physical and chemical resistance properties
Bio-Chime E390 Joint Sealant & Flexible Coating | Expansion Joints | Apply to 2″ Thick | ...
From: $80.00- Tank Chime Area: Create a permanently flexible corrosion resistant seal on chime surfaces of storage tanks and similar structures
- Expansion Joints: Use in situations where other joint compounds would soften or fail by solvent or chemical attack. High resistance to weathering and UV exposure
- Flexible Coating: High flexibility without tearing allows for a durable, chip resistant coating for general applications
Bio-Dur E3000 High Temperature & Chemically Resistant Epoxy | Wet or Dry Surface Application
From: $290.00- Anticorrosive Coating: Splash zone, excellent abrasion resistance above or below water
- Encapsulating Coating: Smooth, dense, easily decontaminated coating for steel and concrete
- High Heat, Anti-Abrasion Coating: High Tg coating with hard, abrasion-resistant pigmentation
- Repair Compound: Patching, leak sealing, etc. above and below water
- Wastewater: Reinforces, smooths, and protects concrete exposed to chemical or municipal waste
Bio-Dur E560 Epoxy Coating for Above Or Below Water Application | Heavy Duty | High Build 30-40 mils...
From: $75.00- Anticorrosive Coating: Splash zone, excellent abrasion resistance above or below water
- Marine and Offshore: heavy duty repair and sealing compound in wet environments
- Repair Compound: patching, leak sealing, etc. above and below water on steel and concrete substrates
- Wastewater: Reinforces, smooths and protects concrete exposed to chemical or municipal waste
- Easy Application: Apply effortlessly using a brush, roller, airless sprayer, or pump sprayer.
- Fast Drying: Achieve quick results with a fast drying time.
Bio-Dur E561 Epoxy Coating for Above Or Below Water Application | Heavy Duty | High Build 40-60 mils...
From: $75.00- Advanced Protection: Safeguard surfaces against water and oil with hydrophobic and oleophobic properties.
- Easy Application: Apply effortlessly using a brush, roller, airless sprayer, or pump sprayer.
- Fast Drying: Achieve quick results with a fast drying time.
- Invisible Finish: Maintain the natural appearance of surfaces without altering their friction or slip resistance.
- Environmentally Friendly: Water-based formula with no solvents or VOCs, ensuring no unpleasant odors.
- Longevity: Enjoy up to 10 years of protection under suitable conditions.
- Versatile Use: Ideal for a variety of mineral substrates, ensuring vapor permeability without compromising surface integrity.
Bio-Dur E563 Epoxy Coating for Above Or Below Water Application | Heavy Duty | Quick Curing | Solven...
From: $75.00- Anticorrosive Coating: Splash zone, excellent abrasion resistance above or below water
- Marine and Offshore: heavy duty repair and sealing compound in wet environments
- Repair Compound: patching, leak sealing, etc. above and below water on steel and concrete substrates
- Wastewater: Reinforces, smooths and protects concrete exposed to chemical or municipal waste
- Easy Application: Apply effortlessly using a brush, roller, airless sprayer, or pump sprayer.
- Fast Drying: Achieve quick results with a fast drying time.
Bio-Fill E457 Epoxy Repair | Void Filler to 1″ | Chemical Resistant | Horizonal ,Vertical and ...
From: $190.00- Civil Structures: Replacing concrete lost by impact or abrasion in power generation, transportation and port facilities
- Chemical Exposure: Restoration and protection of concrete exposed to chemical attack in sumps, secondary containment and similar areas
- 100% Solids
- VOC Free
- Strong yet lightweight filler
- Horizontal, Vertical and Overhead Applications
- Can be applied underwater
Bio-Fix E913 | Quick Epoxy Repair | Above or Below Water Application
From: $92.00- Adhesive: Excellent all-purpose adhesive for use above and below water with excellent temperature resistance
- Repair Compound: Patching, leak sealing, etc. above and below water on steel and concrete substrates
- Pressure Transfer Compound: Rapid curing and high build for quick fix dent filling. Acts as pressure transfer material for FRP repairs
- Above or Below Water Application
- Quick Curing
- Solvent Free
Bio-Flor E182 Acid Resistant Floor Epoxy | Fast Cure | Self Leveling | 100% Solids | Air Shippable
From: $90.00- Loading Docks: Generally used with aluminum oxide abrasive for maximum durability and traction. Reduces or eliminates sweating following sudden changes in weather from cold to hot and humid.
- Vinyl Asbestos Tile: Encapsulates after preparation by OSHA approved scrubbing. Seals and creates a tough, seamless flooring in any color.
- High Gloss
- 100% Solids
Bio-Flor E183 High Temperature Resistant Floor Epoxy | Fast Cure | Self Leveling | 100% Solids | Air...
From: $80.00- Tank Chime Area: Create a permanently flexible corrosion resistant seal on chime surfaces of storage tanks and similar structures
- Expansion Joints: Use in situations where other joint compounds would soften or fail by solvent or chemical attack. High resistance to weathering and UV exposure
- Flexible Coating: High flexibility without tearing allows for a durable, chip resistant coating for general applications
- High Gloss
- 100% Solids
- Self-Leveling
Bio-Gard E251 Heavy Duty Epoxy Coating | Dry or Damp Surfaces | VOC Free | 100% Solids | Air Shippab...
From: $228.00- Anticorrosive Coating: Splash zone, excellent abrasion resistance above or below water. Anticorrosive barrier for in-service fuel storage tank interiors and roofs.
- Industrial Maintenance: General purpose chemical resistant lining for waste neutralization pits, secondary containment,etc. Makes an excellent floor and stair coating when used with entrained or broadcast grit.
- Wastewater: Reinforces, smooths and protects concrete exposed to chemical or municipal waste. Especially useful as the final gloss coating rebuilt with other TFT products
- 100% Solids
- Ships Non-Hazardous
Bio-Gard E255 Heavy Duty Surface Tolerant Epoxy | Chemical Service | Corrosive & Erosive Enviro...
From: $220.00- Anticorrosive Coating: Splash zone, excellent abrasion resistance above or below water. Anticorrosive barrier for in-service fuel storage tank interiors and roofs.
- Industrial Maintenance: General purpose chemical resistant lining for waste neutralization pits, secondary containment,etc. Makes an excellent floor and stair coating when used with entrained or broadcast grit.
- Wastewater: Reinforces, smooths and protects concrete exposed to chemical or municipal waste. Especially useful as the final gloss coating rebuilt with other TFT products
- 100% Solids
- Ships Non-Hazardous
Bio-Seal E192 Epoxy Sealer | Repair, Reinforce & Mortar Resin | Wet Surface Resin / Fiberglass
From: $70.00- Sealer- used to seal and protect concrete, brick and similar surfaces against chemical attack and penetration by water leading to freeze-thaw damage
- Repair Mortar Resin- used to prepare repair and smoothing mortar by stirring in clean silica sand. Typical sand loading of 100 lbs sand per three (3)gallons of Bio-Seal E192
- 100% Solids
- Formulated with no volatile solvents
- Application in Damp or Wet Surfaces
Bio-Seal E197 Epoxy Primer Sealer & Coating | Low Viscosity | Solvent Free
From: $45.00- Penetrating Sealer: Used to seal and protect concrete, brick and other similar surfaces against chemical attack and water eventration which could lead to freeze- thaw damage
- Reinforcing Sealant: When applied to bare sheetrock surfaces, will penetrate the entire fiber surface and cure to a hard, tough, damage resistant layer. Especially suitable for applications where frequent contact with gurneys, trolleys and similar equipment is anticipated
- 100% Solids
- VOC and Odor Free
Bio-Seal E199 Chemical Resistant Penetrating Epoxy Primer Sealer | 100% Solids
From: $215.00- Penetrating Primer Sealer- used to seal and protect concrete, brick and similar surfaces against chemical attack and penetration by water leading to chloride and freeze-thaw damage
- Reinforcing Penetrant - when applied to bare sheetrock surfaces will penetrate the entire fiber surface into the gypsum and will cure to a hard, tough and damage resistant layer. Especially suitable for applications where frequent contact with gurneys, trolleys and similar equipment is anticipated.
- 100% Solids
- Formulated with no volatile solvents
- Application in Damp Surfaces
Bio-Seal E206 Epoxy Coating | High Temperature Application | 100% Solids | VOC free | Up to 40 mils
From: $100.00- High Temperature Coating: for pipelines, tanks and other equipment. Provides outstanding protection against environment exposures and hydrocarbons
- High Temperature Service
- Ambient Hardening
- Single coat application up to 40 mils
- Long overcoat window
- 100% Solids
- VOC free
- High compressive strength and modulus
Bio-Seal E907 Resin | High Heat Tolerance | Quick Return to Service
From: $100.00- Tank Chime Area: Create a permanently flexible corrosion resistant seal on chime surfaces of storage tanks and similar structures
- Expansion Joints: Use in situations where other joint compounds would soften or fail by solvent or chemical attack. High resistance to weathering and UV exposure
- Flexible Coating: High flexibility without tearing allows for a durable, chip resistant coating for general applications
Blok-lok Silane Siloxane Vertical Wall Water Repellent | Concrete Brick Block Stucco
From: $28.00- Professional Grade Vertical Water Wall Sealer
- ASTM Tested to Stop 98 mph Wind Driven Rain
- Clear Penetrating, No Change in Appearance
- Water Base, Low VOC, Eco-Friendly
- 5 Year Labor & Material Warranty
- Specified by Architects in 03300, 04220, 07190
Blok-Lok With Graffiti Control & Water Repellent For Porous Wall Surfaces
From: $61.00- Protect Unpainted Walls From BOTH Graffiti Attacks & Wind Driven Rain in ONE Product
- Save Time & Money Using Less Labor
- Flat Sheen for Little Change in Appearance
- Water Based, Low VOC, Eco-Friendly
- Up to 10 Year Warranty
- Specified by Architects in 07190 / 099623
Blue & Green Glow Flakes (PhotoLuminescent Glow in Dark) For Floor Coatings
From: $3.00- Adds Exciting & Unique Look to Interior Floors
- Phosphorescent - Lights up Floor in the Dark
- Blue or Green glow color
- Activated after absorbing Indoor Illumination
- Continues to glow when room lights off
- Easy to Mix into Basecoat
- 1/4" Standard & 5 options: 1/32", 1/16", 1/8", 1/2", 1"
SOLD IN 1 lb BOX Quantity Discounts Available
Brick Sealer & Water Repellent – Breathable Silane/Siloxane Protection for Brick, Masonry &...
From: $29.00- Brick Sealer is a Specialty Premium Grade Water Repellent and Sealer Designed for Brick
- Prevents Damage From Wind Driven Rain
- Tough, Durable, Stain Resistant Natural Finish
- Protects Mortar From Moisture
- To 5 Year Satisfaction Guarantee
- Eco-Friendly and Easy To Apply
Chalky Wall Sealer and Clear Acrylic Primer
From: $23.00- Prevent Efflorescence, Seal Chalked Surfaces, Improve Adhesion of Topcoat
- For Concrete, Masonry, Wood
- Unpainted and Painted Surfaces
- Water Base, Low VOC, Eco-Friendly
- 3 Year Warranty
- Professional Grade
Chem-Put E32 High Build Epoxy Coating for Chemical Exposures | 100% Solids
From: $180.00- Concrete Repair: High Build Application allows for concrete resurfacing after attack by chemical exposure
- Marine and Offshore: Heavy Duty Repair and sealing compound in wet environments
- Repair Compound: Patching, leak sealing, etc. above and below water on steel and concrete substrates
- Tank Lining: High hydrocarbon chemical resistance with early return to service makes an ideal high build tank lining
- 100% Solids
- VOC Free
- Can be applied on wet surfaces
Chipped Stone Flake Display Board With Real Flakes | 6 Color Blends | Marketing Tool
$50.00- Great Sales Sample and Selling Tool
- Great Way To Visualize 6 different Chipped Stone Flake color blend combinations
- Quickly Show Customers How You Can Make Their Floor Look Great using decorative Chipped Stone Flakes
- Actual Chipped Stone Flake 1/4″ Mounted Samples
Chipped Stone Flakes (Marble-Like Appearance) for Epoxy, Polyaspartic, Urethane Floor Coatings
From: $3.00- Decorative Natural Stone Look
- Marble-Like Appearance
- 18 Different Pre-Mixed Color Blends
- Adds a decorative look to any epoxy, polyaspartic, polyurea, urethane flooring project
- Hide sub-surface imperfections
- 1/4" Standard and 5 options: 1/32", 1/16", 1/8", 1/2", 1"
- Optimal flexibility and strength
- Colorfast, UV stable pigments
- Low sound / noise deadening qualities
- 10% Discount on Order of 100 lbs or More. Use Coupon Code at Checkout: 10%ChipDiscount
SOLD 10 LB BOX
Chips/Flakes for Epoxy Polyaspartic Urethane Floor Coatings | 76 Blends | 6 Sizes | Vinyl
From: $3.00- Adds a Decorative Look to any Epoxy, Polyaspartic, Polyurea, Urethane Flooring Project
- 76 Pre-Mixed Color Blends to Choose From!
- 6 Sizes options: 1/32", 1/16", 1/8", 1/4", 1/2", 1"
- Hide Sub-Surface Imperfections
- Optimal flexibility and strength
- Colorfast, UV stable pigments
- Low sound / noise deadening qualities
- Special Order Flakes also available in 100's additional styles
- Create Your Own Custom Blend and have them shipped pre-mixed!
- USE OUR COLOR VISUALIZER TO SEE WHAT YOUR VINYL FLAKES WILL LOOK LIKE
SOLD IN 10 LB BOX
CLEAR-SEAL 100% Urethane Super Premium Sealer | High Gloss
From: $176.00- High Gloss Super Premium Sealer
- Hot Tire Pickup & UV Resistant
- Great For Driveways, Walkways, Decks, Wall Murals
- Water Base, Low VOC, Eco-Friendly
- Chemical and Spill Resistant
- Excellent Adhesion
- Anti-Slip Finish Available
- For Concrete, Brick, Pavers, Stone, Unglazed Tile and Wood
- Specified by Architects in 099123, 099723, 099313
CLEAR-SEAL 100% Urethane Super Premium Sealer| Low Gloss
From: $176.00- Low Gloss Super Premium Sealer
- Hot Tire Pickup & UV Resistant
- Great For Driveways, Walkways, Decks, Wall Murals
- Water Base, Low VOC, Eco-Friendly
- Chemical and Spill Resistant
- Excellent Adhesion
- Anti-Slip Finish Available
- For Concrete, Brick, Pavers, Stone, Unglazed Tile and Wood
- Specified by Architects in 099123, 099723, 099313
CLEAR-SEAL High Gloss Acrylic Urethane Sealer
From: $79.00- High Gloss Premium Sealer
- UV Resistant
- Great For Walkways, Decks, Wall Murals
- Water Base, Low VOC, Eco-Friendly
- Specified by Architects in 099123
CLEAR-SEAL Low Gloss Acrylic Urethane Sealer
From: $84.00- Low Gloss Premium Sealer
- Hot Tire Pickup & UV Resistant
- Great For Driveways, Walkways, Decks, Wall Murals
- Water Base, Low VOC, Eco-Friendly
- 5 Year Labor & Material Warranty
- Specified by Architects in 099123
CMW 8000 Lithium Moisture Vapor Barrier and Concrete Densifier
From: $54.00- Deep Penetrating Concrete Vapor Barrier
- Reduce Hydrostatic Vapor Pressure on Concrete Floors
- Prevent Damage to Floor Coatings and Flooring
- Densifier Adds 20% - 40% Strength to Concrete
- Helps Stops Efflorscence and Concrete Dusting
- Permanent One Time Application
CoatZF ESD Low-VOC Dissipative Clear Floor Finish | Static Control | ESD and Non-ESD Floors | 5 Gall...
$450.00- Zinc-free
- Static dissipative (1 x 10E6 to < 1 x 10E10 ohms) Coating - ANSI/ESD STM7.1 and ESD TR53
- Low tribocharging (<100 volts) coating - ANSI/ESD STM97.2
- 23% Solids- 2 Coat System** Reduces labor needed for initial install and on-going maintenance of the floor
- Hard, wear resistant – ASTM Standard D2134.93
- UL listed for slip resistance
- Low VOCs & Tribocharging
- Easy to Apply
- Long-Lasting Static Protection
- Designed for High-Traffic Areas
Color-lok Semi-Transparent Acrylic Siloxane Stain Tint Base
From: $60.00- Penetrating Formula Does Not Chip Crack Peel
- Flat Sheen Means No Lap Marks and Rich Uniform Semi-Transparent Appearance
- For Concrete, Masonry, Wood, Surfaces
- Great Moisture Protection
- Water Base, Low VOC, Eco-Friendly
- 5 Year Labor / Material Warranty
- Specified by Architects in 07150 / 09900
Color-lok Semi-Transparent Acylic Siloxane Stain
From: $66.00- Penetrating Formula Does Not Chip Crack Peel
- Flat Sheen Means No Lap Marks and Rich Uniform Semi-Transparent Appearance
- For Concrete, Masonry, Wood, Surfaces
- Great Moisture Protection
- Water Base, Low VOC, Eco-Friendly
- 5 Year Labor / Material Warranty
- Available in 3 Pre-Mixed Colors
- Specified by Architects in 07150 / 09900
Color-lok Solid Color Acrylic Siloxane Stain Tint Base
From: $61.00- Penetrating Formula Does Not Chip Crack Peel
- Flat Sheen Means No Lap Marks and Rich Uniform Solid Color Appearance
- For Concrete, Masonry, Wood, Surfaces
- Great Moisture Protection
- Water Base, Low VOC, Eco-Friendly
- 5 Year Labor / Material Warranty
- Specified by Architects in 07150 / 09900
Color-lok Solid Color Acylic Siloxane Stain
From: $66.00- Penetrating Formula Does Not Chip Crack Peel
- Flat Sheen Means No Lap Marks and Rich Uniform Solid Color Appearance
- For Concrete, Masonry, Wood, Surfaces
- Great Moisture Protection
- Water Base, Low VOC, Eco-Friendly
- 5 Year Labor / Material Warranty
- Available in 3 Pre-Mixed Colors
- Specified by Architects in 07150 / 09900
Colored Natural Mica Flakes for Epoxy, Polyaspartic Floor Coatings | 18 Bold Transparent Colors | Ac...
From: $30.00- Unique Colored Transparent Look made from natural Mica Silicate Minerals
- Adds a decorative accent to any epoxy, polyaspartic, polyurea, urethane and flake flooring project
- Available in Macro 4-8 mesh (~1/4")
- 18 Different Solid Colors
- No Extra Cost for Creating Your Own Custom Blend of Colors!
- Excellent Chemical Resistance
- Extraordinary Resilience
Concrete Sealer and Water Repellent Premium Grade Clear Protection
From: $46.00- Concrete Sealer is a Specialty Premium Grade Water Repellent and Sealer Designed for Concrete
- Protects Against Winter Salt & Freeze/Thaw
- Prevents Damage From Wind Driven Rain
- Tough, Durable, Stain Resistant Natural Finish
- Protects Mortar From Moisture
- To 5 Year Satisfaction Guarantee
- Eco-Friendly and Easy To Apply
Cool Coat Clear Thermal Barrier Heat Reflective Insulating Wall Paint | Elastomeric | Cools The Surf...
From: $83.00- Clear protection - allows underlying surface color to be seen (it "can" be slightly hazy over dark accent colors only)
- Ready-to-Use White and Custom Colored Tint Bases available
- Saves Energy by Reflecting Infrared Radiation With Advanced Ceramic Sphere Technology
- Lower Summer Cooling When Applied to Walls & Roofs
- Cool painted metal surfaces like handrails in hot sun
- Reduce Winter Heating When Applied to Inside Walls
- Thermal Heat Reduction & Waterproofing Coating
- Solar Reflective Index (SRI) of 81.2% & Thermal Emittance 87.4% Reflects Sunlight & Releases Heat on Walls and Roofs
Cool Coat Tint Base Thermal Barrier Heat Reflective Insulating Paint (Custom Colors) | Elastomeric |...
From: $83.00- Saves Energy by Reflecting Infrared Radiation With Advanced Ceramic Sphere Technology
- Custom Color Locally Using One of 3 Tint Bases
- Create Most Colors with Pastel, Deep, Accent Tint Base Options
- Lower Summer Cooling When Applied to Walls & Roofs
- Cool metal surfaces like handrails in the hot sun
- Reduce Winter Heating When Applied to Inside Walls
- Thermal Heat Reduction & Waterproofing Coating
- Solar Reflective Index (SRI) of 81.2% & Thermal Emittance 87.4% Reflects Sunlight & Releases Heat on Walls and Roofs
- Flexible Elastomeric 200% Elongation Resists Cracking
- Tested to Stop a 98 mph Wind Driven Rain
- 5 Year Warranty Available
- Specified by Architects in 09900
Cool Coat White Thermal Barrier Heat Reflective Insulating Wall Paint | Elastomeric | Cools Surface
From: $83.00- Saves Energy by Reflecting Infrared Radiation With Advanced Ceramic Sphere Technology
- Ready-to-Use White Color Flat Finish
- Lower Summer Cooling When Applied to Walls & Roofs
- Cool metal surfaces like handrails in the hot sun
- Reduce Winter Heating When Applied to Inside Walls
- Thermal Heat Reduction & Waterproofing Coating
- Solar Reflective Index (SRI) of 81.2% & Thermal Emittance 87.4% Reflects Sunlight & Releases Heat on Walls and Roofs
- Flexible Elastomeric 200% Elongation Resists Cracking
- Tested to Stop a 98 mph Wind Driven Rain
- 5 Year Warranty Available
- Specified by Architects in 09900
Cove Trowel for Vertical Walls | 4″ and 6″ Height | Curved Blade | Easy Application | W...
$45.00- Curved designed for smooth, professional looking cove application
- Easy to use
- Wood Handle
- Tough steel construction
Create Your Own Fan Deck | Viny Flake, Quartz, Metallic Pigments | Pick 6 to 18 Colors
From: $30.00- Great Sales Sample and Selling Tool
- Great Way To Visualize Combination of Flakes, Quartz and Metallic Pigments
- Customized Color Selection for fan deck
- Actual Vinyl Flake, Quartz and Metallic Pigments
- Select 6, 12 or 18 color samples
Create-a-Blend & Solid Color Outdoor UV Stable Flakes | For Epoxy, Polyaspartic, Urethane Coati...
From: $3.00- Create Your Own Custom Look With Endless Possibilities Mixing Any Number Solid Colors Together For A Custom Blend
- Colorfast, UV stable pigments
- Improves Colors Stability of Flake for use in outdoor spaces
- Choose from 26 Different Outdoor UV Stable Solid Color Flakes
- Contains UV Absorbers to improve UV Stability, Color ∆E< 2.0 after 1,000 hour Q-Sun Xenon Arc test
- Reduce risk of discoloration due to sun exposure
- Adds a decorative look to any outdoor epoxy, polyaspartic, polyurea, urethane flooring project
- Hide sub-surface imperfections
- Optimal flexibility and strength
- Put your color name(s), Part Number and % each color in the Notes Section on bottom of Checkout Page
SOLD IN 10 LB BOX
Create-A-Blend Custom Vinyl Flakes For Epoxy, Polyaspartic, Urethane Coatings
From: $3.00- Create Your Own Custom Look With Endless Possibilities Mixing Any Number Solid Colors Together For A Custom Blend
- Choose from 144 Different Solid Colors
- 6 Size options: 1/32", 1/16", 1/8", 1/4", 1/2", 1"
- Factory Mixed at No Extra Cost
- Add A Decorative Look To Any Epoxy, Polyurea, Polyaspartic, Urethane Flooring Project
- Hide Sub-Surface Imperfections
- Optimal Flexibility And Strength
- Colorfast, UV Stable Pigments**
- Low Sound / Noise Deadening Qualities
- USE OUR COLOR VISUALIZER TO SEE WHAT YOUR CUSTOM BLEND WILL LOOK LIKE
SOLD IN 10 lb BOX
Create-A-Quartz-Blend & Solid Color Granules for Epoxy, Polyaspartic Coatings | 47 Colors
From: $3.00- Choose from 47 solid colors for single color floor OR
- Create-A-Blend option for your own unique color mix
- Natural looking Decorative Appearance
- Use outdoor with superior colorfast / UV stability
- Extreme abrasion resistance
- Excellent chemical resistance
- Great for high traffic, heavy-duty environments
- Outstanding slip-resistance qualities
- Extraordinary resilience
- Grain Size 40-S Broadcast Grade (40 mesh, spherical - MOST POPULAR SIZE)
- Grain Size 25-A Trowel Grade (25 mesh, angular)
- USE OUR COLOR VISUALIZER TO SEE WHAT YOUR QUARTZ GRANULES WILL LOOK LIKE
HOLIDAY SHIPPING SURCHARGES MAY APPLY WEST OF MISSISSIPPISOLD IN 50 LB BAGS
Decorative Vinyl Flake Samples (1 or 3 Pack)
From: $3.00- See the color & blend in person before committing to a full floor system
- Real flake material - not photos or swatches
- Save time and money by choosing confidently before ordering
- Check color accuracy under your actual lighting
- Perfect for homeowners, contractors & designers comparing finishes
- To order, simple select how many samples you want in drop down and in the notes at checkout input what color and size flake you are looking for! Note: if selecting a custom blend please include % of each solid color (total 100%).
Deep Ice Countertop and Casting Epoxy | River Tables | Bar Tops | To 4″ Deep | Bubble Free
From: $85.00- Easy Application
- No need to use torches or vacuum chambers
- Bubble Free
- See-through clarity
- Looks great with Metallic and Mica pigments and Dyes
- Can be poured up to 4” thick at one time
- Excellent UV & Chemical Resistance
- Superior Structural Strength: Withstands 2,000 lbs/sq.in pressure for up to (30 minutes of exposure)
Diamond Cup Concrete Grinding 7″ Wheel | Aggressive 30/40 Grit | 12 Segment | Threaded Arbor |...
$55.20- Flat profile for less tool marks on the concrete
- Softer blades for better performance on hard concrete
- 12 segments for longer life
- 30/40 grit great for both removing existing coatings and roughing up concrete for typical garage, basement and patio floor projects
- For use with 7" grinders containing a threaded arbor
DR OptiShade 15i Dual Reflective Window Film | Rejects 74% Infrared Energy | 16% Visible Light Trans...
From: $199.50- Maximum Reduction of Daytime Temperatures
- Excellent Solar Energy Rejection of 78%
- Blocks 99% of UV Radiation
- Lets 18% of Visible Light Through
- 80% Glare Reduction
- Easy Application to Interior Side of Window
- Available in 25', 50', 75' & 100' Lengths
- Available in 36",48",60" & 72" Widths (Custom Widths Are Also Available)
DR OptiShade 25i Dual Reflective Window Film | Rejects 63% Infrared Energy | 27% Visible Light Trans...
From: $199.50- Lower Cooling Costs with Maximum Reduction of Daytime Temperatures
- Excellent Solar Energy Rejection of 61%
- Blocks 99% of UV Radiation
- Lets 27% of Visible Light Through
- 70% Glare Reduction
- Easy Application to Interior Side of Window
- Available in 25', 50', 75' & 100' Lengths
- Available in 36",48",60" & 72" Widths (Custom Widths Are Also Available)
- To save you time cutting film, custom widths cut to order are available. To do so, simply order the next largest width listed (ex: you need a width of 32", then order 36" and you will receive a roll cut to 32" wide and a 2nd piece 4" wide).
Dripless DC600 Dual Component Joint Filler Cartridge Gun 300ML x 300ML | Epoxy Polyurea
$85.00- Dual-Component twin cartridge gun
- Each cartridge holds either 11 oz /300 ml or 5.5 oz / 150 ml of product
- Handles both 1:1 (300 ml x 300 ml) or 2:1 (300 ml x 150 ml) mix ratio tube configuration
- Quickly Apply Polyurea, Epoxy, Urethane Products
- Easy Application Of our Polyurea repair products: 3246, 3004, 800, 830 and the Epoxy/Urethane E443
- Thrust Ratio 26:1 For Very High Viscosity Materials
- Each Pull Of Trigger Advances Cartridges By 3.5 mm
- Dual Steel Gripper Plates And Steel Push Disc Provide Durability
DT-454 Epoxy Quick Cure UV Concrete Floor Coating Low Temp 40F | 100% Solids
From: $70.00- Tough, Durable Epoxy Coating
- Quick cure 6-7 hour recoat time and 1 Day Application with Turbo
- Cold Weather Application down to 30F
- Outstanding Bonding
- UV Resistant
- Good chemical, impact and abrasion resistance
- Cold temperature application down to 40F
- High solids 100%
- Withstands up to 9 lbs. of hydrostatic pressure
- Available in clear & 12 colors! (Pigment sold separately)
E-Green Polyurea Basecoat for Concrete Floors | Low Temp 40°F | 100% Solids | 300% Elongation
From: $65.00- Tough, durable plant based Polyurea Coating
- Extreme Flexibility (300% Elongation)
- Exceptional Adhesion >500 psi ASTM D4541
- Cold temperature application down to 0°F
- Can be used as high build basecoat up to 16 mils or 100 sq'/gallon
- Excellent chemical and abrasion resistance
- Designed for high traffic and industrial areas
- 100% Solids Performance
- Available in clear & 14 colors!
- Quick Cure 1 Day System
- Little to NO ODOR
E-Poly Pigment For All Floorguard Epoxy & Polyaspartic Coatings | 12 Colors
From: $52.00- Universal E-Poly Pigment Designed to Color All Epoxy & Polyaspartic Coatings manufactured by Floorguard Products
- Add a Beautiful Decorative Color to Your Epoxy Project
- 12 Different Colors to Choose From!
- Sold in Quart Containers - Typically colors 3-5 Gallons When Mixed Into Clear Epoxy or Polyaspartic
- 2 Gallon Containers Available in Select Colors
- Pigment can be Pre-mixed into Floorguard Epoxy & Polyaspasrtic Coatings on all orders 60 gallons or more with 4-7 days lead time (when ordered in 10 or 15 gallon kits as appropriate)
E100 Urethane Primer Finish Coat | Aluminum Galvanized & Rusty Steel | Dry Heat to 400 °F | App...
From: $55.00- Prime over Steel, metal, weathered galvanized steel, aluminum, fiberglass, polyurethane foam and previously painted surfaces
- Excellent “wetting out” properties and performance over sound rusty surfaces
- Outstanding abrasion & chemical resistance
- Very good weather resistance
- Excellent corrosion resistance, passed 1,200 hrs in salt cabinet
- Fast recoat 2-3 hours at 75°F & 50% R.H
- Cures down to 18°F and apply up to 140°F
- High heat resistance to 400°F dry
- Single component, easy to use
- Topcoat with most Epoxy, Urethane , Silicone
- Excellent barrier coat over lead based coatings
- USDA Approved
E1000 Epoxy Concrete Repair Kit | Holes to 1″ | Cracks | Spall | 3 Color
$136.00- Make quick, permanent repairs to concrete
- Patch cracks, spalled concrete and potholes
- Can be applied at ¼” – 1” thickness
- Outstanding adhesion to concrete
- Excellent chemical, abrasion and impact resistance
- USDA approved for food processing plants
- Easy to mix and apply
- 3 Colors Packaged in a 5 gallon pailConcret
E100V Vertical Wall High Build Epoxy Coating | Underwater Concrete | Pools | 13 Colors
From: $50.00- No sagging on vertical walls to 12 mils per coat
- Works well on underwater concrete decorative surfaces
- Great for pools and water features
- Good chemical and abrasion resistance
- Long 45 - 90 min pot life
- Outstanding adhesion 475 psi @elcometer
- Comes in 5 color options
- 100% solids, very low voc
E1015V Vertical Wall Epoxy Coating & Primer to 8 Mils No Sag | 11 Colors
From: $50.00- No sagging on vertical walls up to 8 mils per coat
- Good for priming or coating concrete, wood or masonry.
- Good chemical and abrasion resistance
- Long 1 - 1.5 hour pot life
- Excellent adhesion 425 psi @elcometer
- Wide selection of 11 color options
- Water base
E1016 Anti-Slip Epoxy Concrete Floor Coating – 3 Gal Kit | 20 Colors | Tennis Court Like Surfa...
From: $58.00- Adds a slip resistant finish to concrete floors
- Good for use on surfaces subject to bare foot traffic
- Long 1 - 1.5 hour pot life
- Excellent adhesion
- Good chemical and abrasion resistance
- Wide selection of clear plus 20 color options
- Water base
E101C Moisture Cured Urethane Clear Heavy Traffic Floor Sealer | Dustproofer | Prevents Spalling
From: $85.00- Great heavy duty stain resistant floor sealer for warehouse and other heavy use areas
- Excellent adhesion and sealer for concrete, wood and masonry surfaces.
- Extremely hard, yet flexible film.
- Outstanding “wearing properties
- Highly resistant to abrasion and impact.
- Excellent stain resistance.
- Keeps concrete dusting down.
- Good chemical resistance.
- Easy to clean and maintain.
- Quick recoat as soon as 1-2 hours
- One component, easy to use - No mixing 1-2 hour POT Life.
E104 Primer Moisture Cured Urethane Zinc Rich Primer
$210.00- Excellent "wetting out" and adhesion to sound rusty steel
- Fast recoating within 4 hours at 75F
- Cures down to 25F on dry surfaces
- "Open" recoat window with proper cleaning
- Passed 1,500 hours in salt spray cabinet
- Used as a primer for Epoxy Coatings
- May be applied up to 90% humidity
- Accepts high heat, up to 300F dry
- Provides "galvanic" steel protection
- Excellent as a field touch-up coat for inorganic Zinc Primers
E105M Epoxy Mortar Concrete Resurfacer & Patch Kit
From: $66.00- Economical Easy resurfacing old and damaged concrete floors
- Compressive Strength 8,400 psi ASTM D695
- Heat Deflection Temp 131.7F ASTM D648
- High Build Resurfacing 1/8" to 1/4"
- Patching up to 2" thick
- 100% solids epoxy
- Comes complete with epoxy & aggregate
- Selection of 5 color options
- Application temp range 55°F to 90°F
E110M Epoxy Mortar Concrete Premium Resurfacer & Patch Kit
From: $73.00- Easy resurfacing old and damaged concrete floors
- Premium Tough, Durable, Chemical Resistant Protection
- 10% greater coverage/unit vs E105M Epoxy Mortar
- Compressive Strength 11,150 psi ASTM D695
- Heat Deflection Temp 158.9F ASTM D648
- High Build Resurfacing 1/8" to 1"
- Spot Patching up to 2" - 3" thick
- Long 30-40 min POT Life
- 100% solids epoxy
- Comes complete with epoxy and aggregate
- Selection of 5 color options
- Application temp range 55°F to 90°F
E116 Rust Inhibitive Epoxy Primer
From: $180.00- Excellent rust preventing properties
- Excellent resistance to "under cutting"
- Good flexibility and abrasion resistance
- Long recoat up to 6 months
- Outstanding adhesion and "wetting out" ability
- Excellent film build to protect sharp edges
- Great shop coat primer for fabricators
- Fast recoat times
E126CW Cold Weather Epoxy Mortar Concrete Resurfacer & Patch Kit 35°F to 80°F
From: $71.00- Great for Cold Weather & Cold Storage Facilities
- Application range 35°F to 80°F
- Easy resurfacing old and damaged concrete floors
- Premium Tough, Durable, Chemical Resistant Protection
- Compressive Strength 11,284 psi ASTM D695
- Heat Deflection Temp 149.9F ASTM D648
- High Build Resurfacing 1/8" to 1/4"
- Patching up to 2" thick
- 100% solids epoxy
- Comes complete with epoxy and aggregate
- Selection of 5 color option
E128AF Arctic Epoxy Mortar Concrete Patch Kit | Cold Condition -10°F to 40°F
From: $70.00- Tough, Durable Cold Winter Weather Concrete Patch & Repair
- Excellent Extreme Cold Condition Patching -10°F to 40°F
- Great For Freezer, Cold Storage and Outdoor Winter Repairs
- High Build Resurfacing 1/8" to 1/4"
- Patching up to 2" thick
- Excellent chemical resistance
- Excellent Abrasion and Impact Resistance
- Compressive Strength 11,000 psi ASTM D695
- Quick recoat 1-2 hrs & 2-4 hrs light foot traffic
- Selection of 3 color options
- Easy to Use 3 part kit Includes Silica Sand or Liquid Only
E130A Oil Contaminated Concrete & Asphalt Epoxy Mortar Patch Kit/Resurfacer
From: $66.00- Great for patching and repairing oil contaminated and damaged concrete
- Can be used to patch and repair asphalt surfaces
- Can be applied up to 1/8" one application
- Crack. holes and general surface repairs
- Excellent abrasion and impact resistance
- 100% solids
- Easy to Use 3 part kit Includes Silica Sand or Liquid Only
E139FL Flexible Epoxy Primer & Floor Coating | 60% Elongation | 100% Solids | Indoor & Out...
From: $65.00- Exceptionally flexible epoxy with 60% elongation
- High Build up to 50 mils thick per coat
- 100% Solids Commercial Epoxy
- Excellent Adhesion 450 psi
- Tough Abrasion resistant Only 6 mg loss (Tabor test) and 160 inch lbs Gardner variable impact test
- For use with broadcast systems and as flexible membrane primer
- Wide Variety of 15 Colors
E139JF Flexible Joint Sealant | Expansion Joint | 100% Solids
From: $45.00- Flexible interior joint filler and sealant- Elongation 100%
- Easy Dual Cartridge Applied System
- Quick setting with light foot traffic in as little as 1 hour
- Excellent abrasion resistance
- 100% solids with 0 voc
- Low odor
- Paintable surface
E1409CL Moisture Vapor Barrier Epoxy Sealer Primer For Concrete ASTM F3010
From: $247.00- Reduce effects of moisture vapor transmission on concrete floors
- Control moisture vapor emission rates to 20 lb/24hr/1000 sq' (ASTM F1869)
- Used as Sealer/Primer to protect Polymeric coating systems, vinyl sheets, tile, cementitious overlays, terrazo, wood veneers, and carpet
- 100% solids with 0 voc
- Easy to apply with one coat most projects
- Meets ASTM F3010 for vapor permeance at the recommended thickness
E144 Epoxy Primer & Base Coat | Concrete Wood metal | Satin Finish | Flexible | 20 Colors
From: $54.00- Commercial Grade Epoxy Primer & Coating
- Versatile Works on Concrete, Wood, Steel
- Helps reduce problems from concrete outgassing (air bubbles)
- Long POT Life 3+ hours Means Easy Dip and Roll Application
- Apply low temp to 40F
- Excellent Adhesion 375 psi
- Flexible
- Wide Variety of 20 Colors
- Great Primer for use with E707HB High Build and other 100% Solids Epoxies
E145 Polyamide Epoxy Block Filler | Concrete Block & Masonry Vertical Walls | High Build to 11....
From: $180.00- Excellent Adhesion to Vertical Block and Masonry Surfaces
- Excellent filling properties provide ideal "hold out"
- High Build Apply to 11.5 mils DFT (dry film thickness) One Coat
- Basecoat for high performing coating systems
- Hard film with high impact
- Abrasion Resistance
- Easy to Apply
- Much harder than latex & acrylic block fillers
- Meets requirements for use in Food Processing Plants
- Available in Off White
E1501HN Novolac Epoxy (Replaces E1500HN) | Superior Steel & Concrete Chemical Horizontal Protec...
$340.00- Excellent resistance to acids, alkalis, salts, most industrial chemicals and many solvents
- For Use in tough corrosive chemical environments including 98% Sulfuric Acid, 37% HCL and 70% Sodium Hydroxide
- Great horizontal chemical protection for Secondary Containment for both steel and concrete surfaces
- Thin film self leveling to 40 mils DFT one coat
- Extremely tough with high wearing properties
- Excellent abrasion resistance and impact resistance
- Meets USDA requirements
E155CL Damp Condition Clear Epoxy Primer | Moisture Tolerant | Quick Cure | Low Temp 45° | Flexible
From: $60.00- May be Applied to Damp or Moist Concrete Surfaces
- Excellent as a tough, flexible and clear concrete primer and sealer
- When used as clear Concrete Sealer has very low permeability to keep water and chemicals out while reducing concrete dusting, spalling and deterioration
- Excellent Adhesion to Concrete
- Excellent Primer for use with high performance coating systems
- As Quick as 30 min Recoat Time for 100% Solids Epoxy Systems
- Significantly Reduces Chance of Concrete Outgassing Problems
- Easy concrete preparation with either acid etching or concrete diamond grinding
E15M Epoxy Mastic Steel Primer DTM & Concrete Coating | Chemical Resistant | Low Temp 25F
From: $95.00- High solids DTM (direct-to-metal) chemical resistant steel primer or finish coat to steel and concrete
- Self priming to steel including tight rust
- Apply Vertical Surfaces to 8 mils DFT Steel & Concrete
- Great primer for use with our E1500HN (horizontal) and E555VN (vertical) Novolac Chemical Resistant Epoxies
- USDA Approved
- Tight film, low permeability.
- Exceptional adhesion Exceeds 500 psi
- Excellent impact resistance 90 in lb
- Excellent abrasion resistance CS 17 Wheel, 1000 cycles, 1000 g Load 21 mg loss
- Excellent against rust “undercutting”
- Easy to apply brush, roll and spray
- Low temp cure version to 25°F
- Available 13 colors
E1703 Epoxy Concrete Primer & Sealer | 100% Solids | Chemical & Abrasion Resistant | Easy...
From: $86.00- Outstanding as a primer on concrete
- Good abrasion resistance
- Excellent adhesion to concrete surfaces
- Used as a clear sealer for concrete floors
- Non-toxic when cured
- Easy to apply with no solvent odors
- Good chemical resistance
- Approvable for food processing
E1820 Clear Epoxy Coating | Metallic & Quartz Floor System | 40-50 Min Work Time | High Gloss |...
$260.00- Fast Cure Rate
- Excellent adhesion to concrete and masonry surfaces
- Designed as a clear epoxy for Metallic Pigments, Color Quartz and other decorative floors
- Long 40-50 Minute Working Time
- 100% solids formula eliminates any strong solvent odors
- Excellent "anchor" coat for Epoxy toppings and Overlayments
- Helps eliminate dusting of concrete
- Excellent as a sealer for warehouse and production floors area. Excellent blush resistance.
- Penetrates and fills small voids and hairline cracks
- Higher coverage rates provide lower cost per square foot
- USDA Approvable for food processing plants
- Good chemical resistance
- Used as a sealer over seamless and decorative floors
E1850 Epoxy Floor Coating | 100% Solids | High Gloss | Abrasion Resistant | Long 30-40 Min Work Time...
From: $95.00- Easy to Use With Long to 40 Min Work Time
- Garage, Basement, Warehouse, Factory Floors
- 100% Solids
- Extremely high gloss, tile-like finish
- Outstanding wear and abrasion resistance
- Good resistance to blushing
- Excellent adhesion to concrete surfaces
- One coat high film build from 10-60 mils DFT
- Easy to apply with no solvent odors
- Outstanding chemical resistance
- Meets USDA standards for use in food processing plants
E1875 Epoxy Resin | Chemical Resistance | 100% Solids
$135.00- Excellent resistance to acids, alkalis, salts, most industrial chemicals and many solvents
- For Use in tough corrosive chemical environments including 70% Sulfuric Acid, 37% HCL and 50% Sodium Hydroxide
- Extremely tough with high wearing properties
- Excellent abrasion and impact resistance
- Good adhesion to concrete
- Self-leveling coating
- Meets USDA requirements
- VOC compliant
- No solvent odor when applying
- Low temp cure - down to 40F
- Will cure in damp conditions
E1900/E1901 Polyaspartic Clear Topcoat | 40-50 Min Work Time | Quick Cure | High Solids | Apply 40°F...
From: $230.00- Excellent Clear Top coat for decorative flake and quartz granule systems and solid color epoxy coatings.
- Fast set
- Resistant to hot tire pick up.
- Highly resistant to chemical, abrasion and impact
- Meets USDA requirements for incidental food contact
- High Gloss
- Extremely hard, yet flexible.
- Excellent weather resistance
- Outstanding “wearing” properties.
- Easy to clean.
- Non-chalking and non-yellowing
- Apply up to 12 mils DFT in one coat (110 sq'/gallon)
E2.8 Poly-Chemcure Primer | Fast Recoat | Low-Temp | OEM/Steel Fabricator
$250.00- High performance primer can be prepared on carbon steel, galvanized steel and aluminum
- Recoating in 90 minutes is possible for maximum productivity
- No induction time and longer pot life will improve productivity
- A smooth, sandable primer at 3 mils DFT over abrasive blasted or power tool cleaned substrate is needed for additional corrosion resistance
- Application by brush and roller, in addition to spraying, may be necessary
- Spray application with minimal dry spray is desired
- Application at temperatures as low as 35F is needed. Will cure down to 20F
E211 Epoxy Primer & Sealer
From: $170.00- Good chemical, abrasion and impact resistance
- Outstanding adhesion and "wetting out" properties
- Very low permeability-tight sealed film
- Used as a primer and/or finish coat
- USDA Approvable
- Available in a wide range of colors
- Self-priming on concrete and steel
E25 Water Based Epoxy Primer | Primer for E28 Cool Life | 6 Color/Tint Options | Concrete
$150.00- Excellent Primer for the E28 Cool Life Deck Coating
- 6 Color/Tint Base Options
- Long Pot Life
- Quick 6 Hour Recoat Time
- Water Based - Low VOC
- Easy To Clean
E275 High Build Polyamide Epoxy Mastic | Chemical Resistant | Excellent Adhesion to Steel
$190.00- Excellent adhesion to steel
- Meets USDA Requirements
- A high build primer or finish coat
- Excellent against "undercutting"
- Can be applied up to 12 mils DFT
- Easy to apply, self priming on steel
- Excellent build to protect sharp edges
- Good chemical abrasion and impact resistance
- Convenient 1:1 mixing ratio
- Excellent salt and fresh water resistance
E28 Cool Life Deck Coating | Infrared Heat Reflective Technology in 12 Colors | 100% Acrylic | Concr...
From: $70.00- Up to 25-30% Reduction in Surface Temperature using one of 12 colors available
- Infrared Heat-Reflective Technology
- Great for Pool Decks, Patios, Porches Concrete, Masonry, Wood
- UV Resistant
- Slip resistant surface - passes ASTM D2047-82
- Excellent Hide & Color Retention
- Resistant to Ponding Water
- Light Chemical Resistant
- Alkali & Moisture Resistant
- Fast Drying
- Easy to Clean
- Water based - low voc
E322HW High-Gloss Aliphatic Urethane Abrasion & Chemical Resistant Low Temp 45°F
From: $60.00- Outstanding durability with impact resistance of 160 in lb (Gardner Impact test)
- Cold temperature application down to 45°F
- Excellent abrasion resistance Only 22 mg loss (Tabor Abrasion test) Reduced to 10 mg loss using our High Wear 325 additive
- Excellent Chemical Resistance
- Aliphatic, UV Stable and will not yellow
- Easy to Use with Long 2-4 Hour Pot Life
- Great for both Indoor and Outdoor Concrete Floor Projects
- Comes in wide Variety of Clear and 18 Different Colors
- Solvent Based - Excellent adhesion
E322SG Semi-Gloss Aliphatic Urethane Abrasion & Chemical Resistant Low Temp 45°F
From: $60.00- Outstanding durability with impact resistance of 160 in lb (Gardner Impact test)
- Cold temperature application down to 45°F
- Excellent abrasion resistance Only 24 mg loss (Tabor Abrasion test) Reduced to 12 mg loss using our High Wear 325 additive
- Excellent Chemical Resistance
- Aliphatic, UV Stable and will not yellow
- Easy to Use with Long 2-4 Hour Pot Life
- Great for both Indoor and Outdoor Concrete Floor Projects
- Comes in wide Variety of Clear and 18 Different Colors
- Solvent Based - Excellent adhesion
E332 Clear Antimicrobial Urethane | High Gloss | Resist Mold & Mildew | Stain & Chemical R...
$220.00- Antimicrobial technology
- Excellent chemical resistance
- High Gloss
- Excellent Weather Resistance
- Highly resistance to abrasion and impact
- Extremely hard, yet flexible
- Resists mold and mildew
- Outstanding "wearing" properties
- Easy to Clean
- Topcoat for decorative floors, toppings and pigmented epoxy concrete coatings
E332 Polyester Polyurethane Coating| Clear | Topcoat | High Gloss | Chemical, Impact & Abrasion...
From: $134.00- Excellent Chemical Resistance
- High Gloss
- Excellent Weather Resistance
- Highly Resistant to Abrasion and Impact
- Non-chalking and non-yellowing
- Extremely hard, yet flexible
- Outstanding "wearing" properties
- Easy to clean
- Top Coat for decorative floors, toppings and pigmented epoxy concrete coatings
E343 Quick Fix Concrete Repair Epoxy Urethane Patch Kit | 10 Min Light Traffic | Low Temp 20°F
From: $58.00- Extremely Quick - Walk on it 10 minutes, Full Serivce 1 hour
- Tough Durable Repair as hard as concrete
- Good for use interior & exterior repairs
- Low viscosity Product for Outstanding Adhesion and Deep Penetration of Cracks
- Comes in both small and large patch kits including silica sand and liquid only options
- Use With Sand For Improved Performance and lower repair costs
- Low viscosity (30 cps) Can be Used Without Sand to Penetrate Very Small and Deep Cracks
- Great for cold weather application down 20°F or warm weather up to 90°F
E344QC Polyaspartic Quick Cure Concrete Floor Coating | 85% Solids
From: $60.00- Tough, durable topcoat for interior epoxy floor coatings
- Fast Curing for quick back in-service
- Excellent chemical and abrasion resistance
- UV Stable and will not yellow
- Beautiful high gloss appearance
- Designed for high traffic and industrial areas
- High solids 85%
- Available in clear & 13 colors (Colored Pigment Sold Separately)
E352P Hi-Gloss Polyester Polyurethane Floor Coating | Chemical Abrasion Resistant | Exterior Interio...
From: $205.00- Great Interior & Exterior Horizontal Concrete & Steel Protection
- Exceptional Exterior Durability
- Excellent weather resistance
- Non-chalking and non-yellowing with excellent gloss and color retention
- Extremely tough, yet flexible
- A tile-like finish.
- Easy to clean
- Excellent chemical and stain resistance
- Highly resistant to abrasion and impact
- Outstanding wearing properties
- Handles up to 250°F Dry Service
- Long 4 hour POT life @ 75ºF
- Available in clear and 11 colors
E356HG High Gloss Urethane Moisture Cured | Exceptional Abrasion & Chemical Resistance | UV Sta...
From: $70.00- Superior abrasion resistance Only 4.4 mg loss (Tabor Abrasion test)
- Outstanding Chemical Resistance
- Excellent durability with impact resistance of 100 in lb (Gardner Impact test)
- Aliphatic, UV Stable and will not yellow
- Easy to Use one part with Long 3-5 Hour Pot Life
- Great for both Indoor and Outdoor Concrete Floor Projects
- Solvent Based With Excellent adhesion
E370P Hi-Gloss Hi Build Polyurethane | Non-Yellowing | For Vertical Concrete and Steel | Interior &#...
From: $118.00- Great Interior & Exterior Vertical Concrete & Steel Protection
- Exceptional Exterior Durability
- High solids
- Tile-like finish.
- Easy to clean
- Good chemical and stain resistance
- Highly resistant to abrasion and impact.
- Excellent gloss and color retention to UV exposure
- Pass 2500 hrs - QUV Accelerated Weathering ASTM D4587
- Outstanding wearing properties.
- Non-chalking and non-yellowing
- High film build
- Handles up to 300°F Dry Service
- Long 4-6 hour POT life @ 75ºF
- Available in clear and 21 colors
E374 Clear Satin Polyurethane | Non-Yellowing | For Vertical Concrete and Steel | Walls
$125.00- Great Interior & Exterior Vertical Concrete & Steel Protection and as topcoat for light to medium duty foot traffic only applications
- Exceptional Exterior Durability
- High solids
- Tile-like finish.
- Easy to clean
- Good chemical and stain resistance
- Highly resistant to abrasion and impact.
- Excellent gloss and color retention to UV exposure
- Pass 2500 hrs - QUV Accelerated Weathering ASTM D4587
- Outstanding wearing properties.
- Non-chalking and non-yellowing
- High film build
- Handles up to 300°F Dry Service
- Long 4-6 hour POT life @ 75ºF
- Available in clear and 21 colors
E398 High Build Acrylic Polyurethane | High Gloss
From: $146.00- Excellent resistance to acids, alkalis, salts, most industrial chemicals and many solvents
- For Use in tough corrosive chemical environments including 70% Sulfuric Acid, 37% HCL and 50% Sodium Hydroxide
- Extremely tough with high wearing properties
- Excellent abrasion and impact resistance
- Good adhesion to concrete
- Self-leveling coating
- Meets USDA requirements
- VOC compliant
- No solvent odor when applying
- Low temp cure - down to 40F
- Will cure in damp conditions
E444X Polyaspartic High Gloss Concrete Floor Coating | 84% High Solids | Non-Yellowing | Low Odor
From: $60.00- Tough, durable topcoat for epoxy floor coatings
- Indoor/Outdoor Applications
- Can Apply Direct to Concrete
- High solids 84%
- Easy to Work With 1:1 Mix Ratio
- Can be applied up 12 mils thick one coat (133 sq'/gallon)
- Excellent chemical and abrasion resistance
- UV Stable and will not yellow
- Beautiful high gloss appearance
- Designed for high traffic and industrial areas
- Available in clear & 13 colors (Colored Pigment Sold Separately)
E449 Polyaspartic Fast Cure High Gloss Concrete Floor Coating | 95% High Solids
From: $68.00- Tough, durable topcoat for epoxy floor coatings
- High solids 95%
- Quick back in service 3-5 hours light foot traffic
- Can be applied up 12 mils thick one coat (125 sq'/gallon)
- Excellent chemical and abrasion resistance
- UV Stable and will not yellow
- Beautiful high gloss appearance
- Designed for high traffic and industrial areas
- Available in clear & 13 colors (Colored Pigment Sold Separately)
E450SF Polyaspartic Slow Cure High Gloss Concrete Floor Coating | 90% Solids (Formerly E449SF)
From: $70.00- Tough, durable topcoat for interior epoxy floor coatings
- High solids 90%
- Can be applied up 12 mils thick one coat (120 sq'/gallon)
- Long Working time 20-25 min
- Excellent chemical and abrasion resistance
- UV Stable and will not yellow
- Beautiful high gloss appearance
- Designed for high traffic and industrial areas
- Available in clear & 13 colors (Colored Pigment Sold Separately)
E500MR BEAN-e-doo Mastic Remover | US Grown Soybean Technology | Remove Asbestos Black Mastic Carpet...
From: $35.00- Safely Remove Asbestos, Mastics, Adhesives
- Easy-to-Use
- Fast Acting
- Low, Non-Offensive Odor
- Non-Caustic
- Environmentally Friendly
E5013 Fast Set Clear Epoxy Primer WB Concrete | Wood | Masonry
From: $65.00- Versatile product good on concrete, masonry, wood surfaces
- Quick 4-6 hour Recoat for same day projects
- Excellent as clear primer for epoxy, polyaspartic and urethane coating systems
- Helps prevent concrete outgassing problems when used as primer
- Long 2 hour pot life
- Excellent adhesion 425 psi
- Good chemical and abrasion resistance
- Water base
E5015 Epoxy Primer WB Coating | Concrete Wood Masonry | 20 Colors
From: $51.00- Versatile product good on concrete, masonry, wood surfaces
- Excellent as primer for epoxy, polyaspartic and urethane coating systems
- Helps prevent concrete outgassing problems when used as primer
- Available in Clear and 20 Colors To Match With Topcoat
- Long 1 - 1.5 hour pot life
- Excellent adhesion 425 psi
- Good chemical and abrasion resistance
- Water base
E5030CL Urethane Clear Sealer / Topcoat WB
From: $60.00- Attractive, clear aliphatic non yellowing finish
- Versatile product good on concrete and masonry surfaces
- Recoat only 1-2 hours & light foot traffic 2-4 hours
- Extended 24 hour pot life
- Excellent abrasion resistance (Taber Abrasor test only 10 mg loss)
- High Gloss (>80 at 60 degrees)
- Flexible (120% Elongation at break)
- Water based
E517M Flake Filled Epoxy Mastic Steel & Concrete Coating | Chemical Containment | Low Temp Cure...
From: $125.00- Self Priming on steel
- Excellent primary containment coating for internal tank linings (when part of specified system)
- Excellent secondary containment coating
- Performs well over epoxy mortars and properly primed concrete surfaces
- Can be applied on damp surfaces
- Excellent chemical resistance to acids, caustics, solvents
- Outstanding impact and abrasion resistance.
- Exceptional adhesion Exceeds 700 psi
- Excellent flexibility pass 7/8" mandrel 180º Bend
- Apply Vertical Surfaces to 15 mils one coat
- Meets USDA requirements.
- Low temp cure version to 25°F
- Low VOC 72 grams/Liter
E540PM Poly U Polyurethane Adhesive Remover | US Grown Soybean Technology | Low VOC | Low Odor
From: $35.00- For use on pre-engineered and UV-finished wood floors
- Easy to use gel formula
- leans up Easily with water
- Made with 100% American-Grown soybeans
- Low, Non-Offensive Odor
E5520 Low Gloss Urethane Water Base Abrasion & Chemical Resistant
From: $64.00- Outstanding durability with impact resistance of 160 in lb (Gardner Impact test)
- Excellent abrasion resistance Only 23 mg loss (Tabor Abrasion test) Reduced to as low as 10 mg loss using our High Wear 325 additive
- Excellent Chemical Resistance
- Aliphatic, UV Stable and will not yellow
- Great for Indoor Concrete Floor Projects
- Very Low voc 35 g/L, water based formula
E5521 High Gloss Urethane Water Base | Abrasion & Chemical Resistant | Low Odor | Vapor Permeab...
From: $50.00- Outstanding durability with impact resistance of 120 in lb (Gardner Impact test)
- Excellent abrasion resistance Only 21 mg loss (Tabor Abrasion test) Reduced to as low as 10 mg loss using our High Wear 325 additive
- Excellent Chemical Resistance
- Aliphatic, UV Stable and will not yellow
- Great for Indoor Concrete Floor Projects
- Low odor, water based formula
- Vapor Permeable Topcoat
E555VN Novolac Epoxy | Superior Steel & Concrete Chemical Vertical Protection | Tank Linings
$142.00- Excellent resistance to acids, alkalis, salts, most industrial chemicals and many solvents
- For Use in tough corrosive chemical environments including 98% Sulfuric Acid, 37% HCL and 70% Sodium Hydroxide
- Vertical application to 10 mils DFT.
- Great for Secondary Containment for both steel and concrete surfaces
- Use as Primary Containment and Tank Linings when used as part of specified system
- Excellent abrasion resistance with ceramic filler
- Excellent in battery storage room areas.
- Meets USDA requirements
- May be applied in cold, damp conditions to 45°F with curing down to 35°F
E57936 Lithium Concrete Densifier | Deep Penetrating
From: $45.00- Increases durability by improving resistance to freeze thaw effects
- Improves abrasion resistance and durability.
- Improves weathering, densifies and reduces efflorescence of natural stone, precast stone and cement.
- Protects and fortifies concrete as it seals against moisture damage.
- Application will reduce dusting and increase concrete life
E57937 Lithium Concrete Densifier Extra Strength | Deep Penetrating
From: $60.00- Increases durability by improving resistance to freeze thaw effects
- Improves abrasion resistance and durability.
- Improves weathering, densifies and reduces efflorescence of natural stone, precast stone and cement.
- Protects and fortifies concrete as it seals against moisture damage.
- Application will reduce concrete dusting and increase concrete life
- Extra Strength formula for improved performance
- Comes in both ready-to-use and money saving concentrate options
E57940 Concrete Conditioner With Stain Guard
From: $70.00- Increases durability by improving resistance to freeze thaw effects
- Improves abrasion resistance and durability.
- Improves weathering, densifies and reduces efflorescence of natural stone, precast stone and cement.
- Protects and fortifies concrete as it seals against moisture damage.
- Application will reduce dusting and increase concrete life
E5820 Oil Stop Epoxy Concrete Primer / Coating For Oil Contamination Areas
From: $55.00- Great for coating over oil contaminated concrete
- Can use as a primer before applying decorative coating systems
- Good as stand alone black colored coating
- Excellent substrate penetration through oil contaminated surfaces
- Excellent adhesion where standard epoxies typically fail
- Long 1 - 2 hour pot life
- High solids, 2 component
E5829 Flexible Epoxy Urethane Interior Expansion and Control Joint Sealant
From: $160.00- Flexible interior joint filler - Elongation 50.4% at 70F (ASTM D-412)
- Good for both expansion and control joints
- Great for general industry applications
- Hybrid epoxy urethane 2 component formula
- 100% solids with 0 voc
- Long 30-40 minute working time
- Low odor
- Paintable surface
E5829V Vertical Interior Wall Expansion & Flexible Joint Sealant
From: $162.00- Flexible vertical interior joint filler - Elongation 67% at 70F (ASTM D-412)
- No sag formula for vertical interior wall and overhead applications
- Hybrid urethane epoxy 2 component formula
- 100% solids with 0 voc
- Low odor
- Paintable surface
E5830 Flexible Interior Expansion & Control Joint Sealant | Fast Set | Cartridge Applied
From: $60.00- Flexible interior joint filler and sealant- Elongation 100%
- Easy Dual Cartridge Applied System
- Quick setting with light foot traffic in as little as 1 hour
- Excellent abrasion resistance
- 100% solids with 0 voc
- Low odor
- Paintable surface
E591 / E590 Wet Surface Epoxy | Apply Underwater | Cures to 35°F | Concrete – Steel | Floors &...
From: $120.00- May be applied on wet or under water surfaces
- Cold temperature application down to 35°F
- Self-priming on steel and on most concrete applications
- Ideal for marginally prepared and painted surfaces
- Outstanding impact and abrasion
- High film build - Up to 20 mil DFT per coat on horizontal surfaces
- Vertical surfaces to 12 mils
- Excellent coating for manholes
- 100% solids and 0 g/L VOC's
- 3 Colors Available
E600GL Soy-Gel Coating Remover | US Grown Soybean Based | Remove Acrylic Enamel Latex Paints | Ureth...
From: $40.00- Removes Acrylic Enamel Latex Lead* Paints, Urethanes, Some Epoxies
- Up to 3 Times the Coverage of Traditional Strippers
- Horizontal and Vertical Applications
- 100% Biodegradable
- American Grown Soybean Based Technology
- Environmentally Friendly
- Low, Non-Offensive Odor
E603 Non Skid Epoxy | Truck Bed Liner | Anti-Slip
From: $96.00- Provides safer footing and traction
- Heavy duty non-ski resistance
- Provides excellent slip resistance
- Good water, salt and chemical resistance
- Excellent coating for Diamond Plate
- Cures down to 35F
- Good abrasion and impact
- Ready to use non-skid coating
- Easy to Apply
- Designed for wet areas
E605Pro with Safenol™ | Multipurpose Coatings Remover | Paints | Varnish | Enamel | Urethanes | Some...
From: $40.00- Removes Acrylic Enamel Latex Lead* Paints, Urethanes, Some Epoxies
- Up to 3 Times the Coverage of Traditional Strippers
- Single Application
- Horizontal and Vertical Applications
- Environmentally Friendly
- Low, Non-Offensive Odor
E610SP Soy-Gel Coating Spray Remover | US Grown Soybean Based | Remove Acrylic Enamel Latex Paints |...
From: $35.00- Removes Acrylic Enamel Latex Lead* Paints, Urethanes, Some Epoxies
- Specially Formulated for HVLP and Commercial Sprayers
- Vertical or Horizontal Application
- Up to 3 Times the Coverage of Traditional Strippers
- Horizontal and Vertical Applications
- 100% Biodegradable
- American Grown Soybean Based Technology
- Environmentally Friendly
- Low, Non-Offensive Odor
E615 Epoxy Crack Filler | 100% Solids | Vertical, Overhead & Horizontal | Concrete, Steel and W...
$185.00- May be applied up to 1" thick when patching holes
- Excellent chemical, abrasion and impact resistance
- Easily applied with trowel, putty knife or spatula
- Applies up to 1/2 inch vertically
- Excellent for filling bug holes
- Used for leveling base plates and embedding bolts
- Non-Toxic when cured
- Zero VOC
- Excellent for patching concrete in manholes and sewer pipes
E621 Flexible Control Joint Filler | 100% Solids | Up to 100% Elongation | Self-Leveling
$335.00- Up to 100% Elongation
- Good resistance to steel wheel traffic
- Very resilient and tough
- Outstanding water tight bond to concrete
- Helps to prevent erosion of control joint edges
- Self leveling
- Easy to work with, cold applied, no special equipment needed
- Excellent adhesion to concrete
- USDA approved
- No VOCs
E64 Rain Shield Elastomeric | Flexible 400% Elongation | 100% Acrylic | Ceramic Sphere Technology | ...
From: $75.00- Flexible Up to 400% elongation ASTM D412-87
- Resists Wind Driven Rain (Passes ASTM E96, TTC-555-B)
- Breathable, Thermal Barrier
- Excellent Adhesion
- Flexible: Performs very well in hot and cold environments
- Bridges Hairline Cracks
- Environmentally Friendly
- Excellent Dirt Pick Up Resistance
- Chemically resistant surface
- Superior Resistance to UV Breakdown
- Over 800+ Colors
E6470 Textured Primer | 100% Acrylic Latex | High Build Elastomeric | Concrete Masonry Stucco Wood
From: $62.00- Primer and Texture in one
- Allows matching of surrounding textured surfaces for repairs
- Superior adhesion to virtually any surface
- Excellent surface adhesion
- Fast drying
- Breathable
- Penetrates and seals porous surfaces
E650 Non-Skid Epoxy Floor & Deck Low Temp 25°F | OSHA ADA Navy Spec Mil-PRF-24667B Type 1 | 4 Co...
From: $107.00- Heavy duty non-skid resistance for concrete & steel
- Available in regular cure and cold temp formula to 25°F
- Designed for wet areas
- Meets ADA and OSHA requirements for safe co-efficient of friction (COF) when properly applied
- Meets Navy Military Specification Mil-PRF-24667B for Non-Skid Deck Coatings
- Excellent adhesion, abrasion and impact resistance
- Resistant to grease, oil, salt water, alcohol, detergent, gasoline, hydraulic fluid
- Excellent coating for Diamond Plate
- Easy to apply, ready to use non-skid coating
- Comes in 4 colors
- E651 Non-Skid Epoxy Version Available with ZERO VOC
E669 Clear Acrylic Lacquer High Gloss Sealer | Concrete | Brick | Wood | Solvent Based | Outstanding...
From: $55.00- Non-yellowing, high gloss. properties.
- Excellent penetration and high “wetting out”
- Excellent adhesion to concrete.
- Great for Concrete, Masonry & Wood Surfaces
- Good UV resistance.
- Good water and salt chemical resistance.
- Good stain resistance.
- Prevents “dusting” by increasing strength of concrete
- Ideal as dustproofing sealer.
- Very fast dry time.
E671 UV Resistant Epoxy Floor Coating | Clear | 100% Solids | For Metallic Pigment and Full Flake &#...
From: $55.00- Clear epoxy great for use with metallic pigments and full flake or quartz broadcast systems
- UV Resistance Additive in Coating
- High Build – 100% Solids Commercial Epoxy
- Good Adhesion 350 psi
- Good Chemical Resistance
E671CL Epoxy Floor Coating | Clear | 100% Solids | For Metallic Pigment and Full Flake & Quartz...
From: $52.00- Clear epoxy great for use with metallic pigments and full flake or quartz broadcast systems
- High Build - 100% Solids Commercial Epoxy
- Good Adhesion 350 psi
- Good Chemical Resistance
- High build 12-30 mils one coat (53 - 130 sq'/gal)
E680HS Hard Surface Graffiti Remover | 100% American-Grown Soybean Technology | Non-Caustic | Non-Co...
From: $40.00- 100% American-Grown Soybean Technology
- Maintain Original Appearance - No Need to Repaint!
- Fast-Acting
- Low VOC
- Low, Non-Offensive, Odor
- Non-Caustic
- Non-Corrosive
E682PS Porous Surface Graffiti Remover | 100% American-Grown Soybean Technology | Non-Caustic | Non-...
From: $42.00- 100% American-Grown Soybean Technology
- Maintain Original Appearance - No Need to Repaint!
- Fast-Acting
- Low VOC
- Low, Non-Offensive, Odor
- Non-Caustic
- Non-Corrosive
E690PB Lead Out™ Lead Paint Remover | Safely Neutralize & Remove Lead Paint | 100% American-Gro...
From: $60.00- Safely neutralizes lead content to below EPA standards
- Encapsulates lead in to a non-hazardous waste
- Limits lead dusting during removal
- Easily applied gel formula
- Low, non-offensive odor
- Non-Caustic
E70 Stretch-Guard Elastomeric Coating | Flexible 200% Elongation | 100% Acrylic | Concrete Stucco Ma...
From: $32.00- Up to 200% elongation
- Flexible: Performs very well in hot and cold environments
- Repels water & helps eliminate moisture penetration
- Good mildew and dirt resistance
- Self-Priming
- Ultra-violet stability
- Resistant to dirt pick-up
- Over 800 colors available!
E700DG Emerge Degreaser Super-Concentrate | Removes Oil Grease Dirt Grime From Concrete | Wood | Vin...
From: $35.00- Removes Oil, Grease, Dirt & Grime From Wide Range of Surfaces
- Super-Concentrated & Easy to Dilute
- Vertical & Horizontal Application
- Low, Non-Offensive Odor
- Non-Caustic
- Environmentally Friendly
E700HV Epoxy | Exceptionally Tough | Abrasion & Chemical Resistant | No Topcoat Required
From: $64.00- Saves Money - Eliminates Need for Urethane or Polyaspartic Topcoat
- Extremely Tough D-90 Shore Hardness
- Exceptional Abrasion resistance Only 19 mg loss (Tabor test)
- Excellent Adhesion 420 psi
- Good Chemical Resistance
- Great Looking Very High gloss (80-105 at 60 degrees @ glossmeter)
- 97% Solids Commercial Epoxy
- High build 15-30 mils one coat (53 - 106 sq'/gal)
- Wide Variety of 20 Colors
E7075 Smooth Primer | 100% Acrylic Latex | Stain Blocking | Concrete Stucco Wood Metal Plywood
From: $35.00- Superior adhesion to virtually any surface
- Blocks water soluble stains such as tannins, rust and smoke damage
- Excellent surface adhesion
- Fast drying
- Breathable
- Low odor
- Water clean-up
- Penetrates and seals porous surfaces
- Great matching primer for our E64, E68H, E70, E78H, Tec-Top and Cool Coat Coatings
E707HB High Build 100% Solids Epoxy Floor Coating | 20 Colors
From: $55.00- High Build - 100% Solids Commercial Epoxy
- Long POT Life (working time) 30-50 min
- Excellent Adhesion 450 psi
- Abrasion resistant Only 32 mg loss (Tabor test)
- Good Chemical Resistance
- High build 12-30 mils one coat (53 - 130 sq'/gal)
- Wide Variety 20 Different Colors
E707LVP High Solids Epoxy Primer & Base Coat | Helps Prevent Outgassing | 20 Colors
From: $54.00- High Solids Commercial Grade Epoxy Primer
- Helps reduce problems from concrete outgassing (air bubbles)
- Long POT Life (working time) 35-55 min
- Excellent Adhesion 430 psi
- Good Chemical Resistance
- Wide Variety 20 Different Colors
E760CE Verasafe® Muriatic Acid Replacement | Etch Concrete | Safe Organic Alternative to Harmful Aci...
From: $30.00- Safe Alternative to Hydrochloric, Sulfuric and Muriatic Acids
- Organic Formula
- No Neutralizing Required
- Non-Caustic
- Non-Fuming
- Low VOC
- 100% Biodegradable
- Low, Non-Offensive, Odor
E77 Fast Cure Epoxy Concrete Primer & Base Coat | 15 colors
From: $95.00- Ideal for a base coat for flake floors
- Good chemical, abrasion and impact resistance
- Outstanding adhesion and "wetting out" properties
- Used as a primer for pigmented polyurethanes
- Excellent as a primer for polyaspartics
- USDA Approvable
- Available in a wide range of colors
- Self-priming on concrete and steel
- 15 color options
E811FP Acrylic Self Plasticizing Roof Coating | Monolithic Flexible Membrane
From: $240.00- Exceptionally tough, flexible 1 part acrylic roof coating
- Excellent adhesion for Concrete, Wood and Metal
- Tough surface, holds up to normal foot traffic
- Excellent weathering pass ASTM G93 for 9,000 hrs
- Excellent UV stability
- Resists growth of mildew
- Excellent flexibility 415% Elongation
- Resists cracking, splitting with building movement
- Available in 6 colors
- Underwriters Laboratories (UL) Tested & Certified
E814CP Co-Polymer Flat Roof Coating | 11 Color | Flexible | Waterproof
From: $235.00- Exceptionally tough, flexible 1 part SEBS Based waterproof coating
- Great for both Flat & Sloped Roofs
- Excellent adhesion EPDM, APP, TPO, Hypalon, Fiberglass, PVC, Polyurethane Foam, Concrete, Wood, Metal
- Excellent waterproof with E96 Vapor Transmission Class I 0.025 perms and Water Absorption 0.04%
- Excellent weathering
- Excellent UV stability
- Good resistance to dirt pickup
- Excellent low temp flexibility 500%+ Elongation
- Resists mildew and fungi growth
- Good resistance to Alkalis and acids
- Available in 11 Colors
- Underwriters Laboratories (UL) Tested & Certified
- Class A Fire Rated
E814R Co-Polymer Liquid Rubber Roof Walkway Coating | Slip Resistant
From: $210.00- Exceptionally tough, durable one part waterproof roof walkway
- Offers excellent anti-slip walking surface
- Excellent adhesion EPDM, APP, TPO, Hypalon, Fiberglass, PVC, Polyurethane Foam, Concrete, Wood, Metal
- Available in 12 colors
- Excellent waterproof with E96 Vapor Transmission Class I 0.025 perms and Water Absorption 0.04%
- Excellent weathering
- Excellent UV stability
- Good resistance to dirt pickup
- Excellent low temp flexibility with 500%+ Elongation
- Resists mildew and fungi growth
- Good resistance to Alkalis and acids
E814RCP Heat Reflective Co-Polymer White Flat Roof Coating | Cools Roof Surface | Saves Energy | Fle...
From: $205.00- Exceptionally Tough, Heat Reflective, 1 Part SEBS Based Waterproof Coating
- Great for Flat & Sloped roofs
- Excellent adhesion to EPDM, APP, TPO, Hypalon, Fiberglass, PVC, Polyurethane Foam, Concrete, Wood, Metal surfaces
- Reflective white color reduces energy costs with Solar Reflectance 82.5% and SRI 102 (solar reflective index)
- Excellent waterproof E96 Vapor Transmission Class I 0.025 perms & Water Absorption 0.04%
- Excellent weathering
- Excellent UV stability
- Good resistance to dirt pickup
- Excellent low temp flexibility 500%+ Elongation
- Resists mildew and fungi growth
- Good resistance to Alkalis and acids
- Underwriters Laboratories (UL) Tested & Certified
- Class A Fire Rated
E8840 Heat Reflective Roof Coating | 100% Acrylic Ceramic Elastomeric | Flat Build-Up Roofs | Metal ...
From: $60.00- Reduce Interior Temperatures Up To 20%
- Up to 30% Energy Savings
- Waterproofing System
- Resists Ponding Water
- Extends Roof Life
- Infused with Ceramic Spheres to add Durability and Insulating Value
- Class A (ASTM-E-108) Fire Rated
- Easy Water Clean-up
E8875 Underseal Water Proofer | 100% Acrylic Elastomeric | 500% Elongation | Composition, Bitumen, A...
From: $65.00- Excellent Roof Coating, Planter Box & Shower Pan Waterproofing Basecoat
- Up to 500% Elongation
- Primes and Seals
- UV Resistant
- Creates a Water Barrier
- Flexible at Low Temperatures
- Resistant to Ponding Water
- Resistant to Cracking
- Low VOC/Environmentally Friendly
- Topcoat with our E8840 Heat Reflective Roof Coating for an energy saving waterproofing system
E903M Urethane Cement High Build Mortar | Wet Heat to 200F | Hot Oil & Water Wash | Resist Fung...
$245.00- Excellent heat and thermal shock resistance to 200F
- Very good chemical resistance to organic and inorganic acids and solvents
- Resistant to Fungi Growth: Passes rating of 1 @ ASTM G-21
- Seamless hygienic finish with no grout lines
- High build repairs to 1"
- Excellent bonding characteristics
- Low odor, fast installation and fast cure.
- Low temp application down to 45F
- Available 3 colors gray, tan and tile red
E903SL Urethane Slurry | High Wet Heat 200F | Hot Oil & Water Wash | Moisture & Fungi Resi...
$260.00- Excellent heat and thermal shock resistance to 200F wet heat
- Very good chemical resistance to organic and inorganic acids and solvents
- Excellent Moisture vapor transmission to 12 pounds per 1,000 sq. ft. over a 24 hour period as per ASTM E1907
- Resistant to Fungi Growth: Passes rating of 1 @ ASTM G-21
- Good anti-skid surface
- Excellent bonding characteristics
- Great protection for food and beverage industry, food processing plants, dairy farms, industrial kitchens and wine cellars.
- Low temp application down to 45F
- Available 3 colors gray, tan and tile red and 2 package sizes
- E903SL Urethane Slurry is the high performance basecoat to the E903TC Urethane Top Coat high heat System
E903TC Urethane Topcoat | High Wet Heat 200F | Hot Oil & Water Wash | Moisture & Fungi Res...
From: $125.00- Excellent heat and thermal shock resistance to 200F wet heat
- Very good chemical resistance to organic and inorganic acids and solvents
- Excellent Moisture vapor transmission to 12 pounds per 1,000 sq. ft. over a 24 hour period as per ASTM E1907
- Resistant to Fungi Growth: Passes rating of 1 @ ASTM G-21
- Good anti-slip surface
- Excellent bonding characteristics
- Great protection for food and beverage industry, food processing plants, dairy farms, industrial kitchens and wine cellars.
- Low temp application down to 45F
- Available 3 colors gray, tan and tile red
- E903TC Urethane is the high performance topcoat to the E903SL Urethane high heat Slurry System
E903UCB Cove Base Urethane Mortar | HIgh Heat 250F | Anti-Fungal
$160.00- Easy construction of vertical cove bases
- Seamless hygienic finish with no grout lines
- Resistant fo fungi growth
- Low odor, fast installation, fast cure
- Thermal shock to 250F & chemical resistance
- 3 color options
E915HD Heavy Duty Cleaner Degreaser Concentrate | 100% Biodegradable
From: $37.00- Heavy duty cleaner formulated for versatility and dependability.
- Rapidly removes dirt, grease and grime from wide variety surfaces
- Compatible with most industrial floor coatings incl Epoxies, Polyaspartics, Urethanes
- Dissolves and removes food grease and many industrial oils and greases
- Use as general-purpose cleaner, floor cleaner, wax and floor finish stripper, engine degreaser and many other cleaning problems.
- 100% Biodegradable
- No caustics, butyl ethers, or chlorinated and petroleum based solvents
- Use by hand or through steam or pressure cleaning equipment, automatic floor scrubbers, etc
- Economical Concentrate Formula. Dilution rates to 1:50 for sensitive surfaces
E916MF Multi-Functional Heavy Duty Cleaner Concentrate | Floors Walls Equipment
From: $28.00- Rapidly removes dirt, grease and grime from wide variety surfaces
- Dissolves and removes food grease and many industrial oils and greases
- Use as general-purpose cleaner, floor cleaner, wax and floor finish stripper, engine degreaser and many other cleaning problems.
- Use by hand or through steam or pressure cleaning equipment, automatic floor scrubbers, etc
- Economical Concentrate Formula. Dilution rates to 1:30 for sensitive surfaces.
EasyClean Bio Stripper | Remove Paint Epoxy Varnish Lacquer | Eco-Friendly | Water Based | Fast-Acti...
From: $20.00- Remove Paint Epoxy Varnish Lacquer Shellac Polyurethane
- Horizontal and Vertical Applications
- Reduced Dwell Time
- Environmentally Friendly
- Low voc
- Low, Non-Offensive Odor
- Fast Acting
EcoScrub Floor Stripper/ Degreaser
From: $130.00- Rinse-free formula
- Low foaming
- No environmentally toxic preservatives
- Low Odor
- Non caustic
- Removes CoatZF Static-dissipative floor finish
- Use With Groundworx Basic ESD Epoxy Floor for heavily soiled areas.
EE-10 Epoxy Primer | 98% Sulfuric Acid Immersion Service | 100% Solids
From: $88.00- Excellent for 98% Sulfuric Acid Immersion
- Strong Chemical Resistance
- Good in aggressive acid environments
- Immersion and Non-Immersion Service
- Work on Ferrous and Non-Ferrous Metals & Concrete
EE-121HT Amine Cured 100% Solids Novolac Epoxy | Top Coat | High Heat
From: $85.00- Temperature resistance up to 500F (dry) and spike to 580F (3 hours)
- Strong Chemical Resistance
- 100% Solids
- Very Good Abrasion
- Great for aggressive, industrial applications
EE-70 Amine Cured 100% Solids Spray Apply Epoxy | Secondary Containment | NSF 61 Potable Water | USD...
From: $50.00- Secondary Containment Application
- Can be applied to damp or wet substrates
- 100% Solids
- Chemical and Abrasion Resistant
- Immersion and Non-Immersion Service
EE-71 Amine Cured 100% Solids Novolac Epoxy Topcoat| Secondary Containment | Chemical Resistant | US...
From: $50.00- Secondary Containment Application
- Can be applied to damp or wet substrates
- 100% Solids
- Chemical and Abrasion Resistant
- Immersion and Non-Immersion Service
EE-72 Novolac High Heat Epoxy | Immersion to 245ºF | Dry Heat to 400ºF (3 Hrs) | Secondary Containme...
From: $54.00- Strong chemical resistance to acids and alkalis
- High Heat Environments
- Immersion Service to 245ºF
- Dry Heat to 400ºF (3 Hrs)
- High Build Formula to 100 mils DFT (dry film thickness) in One Coat
- Self-leveling flooring
- 100% Solids
- Excellent flexibility without sacrificing chemical resistance
- High Abrasions Resistance
- Easy to clean surface
EE-80 Solids Epoxy Pre-Primer | Structural Steel, Tanks, Waste Water | Chemical Resistant | USDA | 1...
From: $70.00- Secondary Containment Application
- Can be applied to damp or wet substrates
- 100% Solids
- Chemical and Abrasion Resistant
- Immersion and Non-Immersion Service
EE-95 Novolac Epoxy Rebuild | 100% Solids | Restoration | Vertical
From: $80.00- Rebuild any pit repair
- Smoothing or leveling of vertical areas
- Solvent Free
- VOC Free Product
- Strong chemical resistance
- Applied up to 500 mils without slump
Efflorescence Blocker Protects Concrete and Masonry Surfaces | Floors and Walls
From: $87.00- Blocks efflorescence & alkali from coming to surface
- Concrete & Masonry Floors and wall Surfaces
- Ideal for planters and groundwater penetration
- Excellent exterior durability
- Direct and reverse impact resistant
- Works as a universal primer
- Water and stain resistant
- Wet and dry adhesion
Enhanced Flake Sample Kit | Natural Mica | Colored Mica | Glitter Powder & Glitter Flakes | 51 ...
$60.00- Great Sales Sample and Selling Tool
- Actual Loose samples of all variety of vinyl flake enhancement
- 51 samples included
- Great way to help create and visualize your own unique custom blend
- Quickly Show Customers How You Can Make Their Floor Look Great using decorative Random Cut Glitter Flakes
ESD 640 Textured Conductive Vinyl Chair Floor Mat Protects Anti-Static Floors | Meets ANSI 20.20
From: $120.00- Resistant to acids, reducing agents, detergents, alcohols, hydrocarbons, mineral oil, amines and aldehydes
- Black, pebble-embossed textured surface
- Single layer .080" (2.032 mm) thickness
- Conductive, <1e6 ohms ANSI/ESD S7.1
- Operating Temperature -20F to 200F (-29C to 93F)
- Grounding snap add upon request
- Made in USA
ESD Cleaning Buffing Pads | Use with Eco Scrub Degreaser
From: $40.00- Gray Scrub Pad provides great initial maintenance for light to moderate soiled floors
- Maroon Scrub Pad provides great maintenance for moderate to heavy soiled floors
- Use for both sides of scrub pad
- 1,500 square ft coverage
- Enhanced cleaning for ESD floor systems
- Use with the Eco Scrub Degreaser.
ESD Conductive Anti-Fatigue Cushioned Floor Mat Protects Anti-Static Floors | Meets ANSI 20.20
From: $335.00- Conductive 1/2" cushioned Anti-Fatigue Floor Mat
- Resistance point to point measures 1x10e5 – 1x10e7 ohms
- Dissipative cushioned under layer
- Smooth surface
- Beveled edges
- Equipped with 10mm female ground socket
- 10’ grounding cord
- Made in USA
- Protects ESD Flooring & ESD Paint Investment
- Comes in 3 sizes
ESD Conductive Floor Runner Protects Anti-Static Floors | Meets ANSI 20.20 | 48″W x 75’L
$3,400.00- Protects ESD Flooring & ESD Paint Investment
- Solid Flat Surface Impervious to Damage from Chair Casters
- Great for Long Workbenches or easy cut to size with utility razor knife: 48"W x 75'L
- Conductive Anti-Static Protection
- Continuous and Permanent Path-to-Ground
- Lifetime Warranty ANSI S20.20 & ANSI S7.1-2005
- Electrical properties are warranted for the lifetime of the mat
- Resistance measures 10e4 – 10e6 ohms per ANSI/ESD S7.1-2005
- Compliant to ANSI/ESD S20.20
- Solid single layer is .090" (2.29 mm) thick
- Low outgassing and low VOC
- Made in the USA
ESD Conductive Vinyl Chair Floor Mat Protects Anti-Static Floors | Meets ANSI 20.20
From: $200.00- Protects ESD Flooring & ESD Paint Investment
- Solid Flat Surface Impervious to Damage from Chair Casters
- Conductive Anti-Static Protection
- Continuous and Permanent Path-to-Ground
- Lifetime Warranty ANSI S20.20 & ANSI S7.1-2005
- Comes in 3 sizes
- Electrical properties are warranted for the lifetime of the mat
- Resistance measures 10e4 – 10e6 ohms per ANSI/ESD S7.1-2005
- Compliant to ANSI/ESD S20.20
- Solid single layer is .090" (2.29 mm) thick
- Low outgassing and low VOC
- Made in the USA
ESD Copper Grounding Strips | ANSI/ESD S20.20 | Conductive Grounding For Floor Paint
From: $50.00- Safely ground floor coating systems
- Meet ANSI 20.20 grounding standards when used in conjunction with proper safety items
- Easy to Apply With Adhesive Backing
ESD Vinyl Workspace & Chair Mat For Anti-Static Floors | Conductive ANSI 20.20 | Slip Resistant...
From: $130.00- Protects ESD Flooring & ESD Paint Investment
- Impervious to Damage from Chair Casters
- Great for workstations with Slip Resistant Textured Surface
- Conductive Anti-Static Protection
- Continuous and Permanent Path-to-Ground
- Lifetime Warranty ANSI S20.20 & ANSI S7.1-2005
- Comes in 2 sizes (36"x60" and 48"x72")
EXPERT Clean & Bright Eco Cleaner | Step 1 (LIGHT)| Multi-Purpose Wood Cleaner & Stain Rem...
From: $25.00- Mild alkaline wood cleaner for removing surface stains from unsealed, lightly soiled, or faded wood
- Removes Mold, mildew and algae
- Safe eco-friendly formula- no harsh chlorines or bleaches
- Ideal prep before stain or coating application
- Restores Wood's Natural Beauty
- Remove and cleans organic growth stains; Algae, Mold and Mildew
- Eco-Friendly Formulation for preparing a newer fence or deck for stain
- Multi-purpose Cleaner for untreated and treated wood
- Safe for use on all wood finishes, vinyl and composites
- Easy to Use & Clean Up
- Step 1 (LIGHT) or our 3 Step Process to Get your Project Ready for Expert Stain & Seal
EXPERT Clean & Bright Wood Brightener | Step 2 | Neutralize Wood Surfaces After Cleaning | Surf...
From: $25.00- Brings back the original color of the wood
- Neutralizes and brightens wood after any alkaline chemical wash
- Restores proper pH in wood and opens wood grain to accept more stain
- 100% Oxalic Acid
- Wood Brightener
- Step 2 or our 3 Step Process to Get your Project Ready for Expert Stain & Seal
EXPERT Clean & Bright Wood Cleaner | Step 1 (MILD)| Lifts & Removes Stains | Removes ...
From: $25.00- Effective Alkaline wood cleaner for removing surface stains
- Remove and cleans organic growth stains; Algae, Mold and Mildew
- Removes stains caused by tannins
- Works well on both treated and untreated exterior wood.
- Easy to Use & Clean Up
- Restores Wood's Natural Beauty
- Step 1 (MILD) or our 3 Step Process to Get your Project Ready for Expert Stain & Seal
EXPERT Clean & Bright Wood Stripper | Step 1 (HEAVY)| Oil & Water Base Stain Remover | Rem...
From: $25.00- Removes Oil & Water Based Stains, Latex & Acrylic Paints
- Remove and cleans organic growth stains; Algae, Mold and Mildew
- Easy to Use & Clean Up
- Restores Wood's Natural Beauty
- No Bleach Added
- Step 1 (HEAVY) or our 3 Step Process to Get your Project Ready for Expert Stain & Seal
EXPERT Clean & Bright Wood Stripper Booster | Step 1 (EXTRA HEAVY) | Boosts Effectiveness of Wo...
From: $70.00- Perfect Booster for Wood Strippers when removing water based stains like Behr, Olympic or Superdeck
- Step 1 (EXTRA HEAVY) of our 3 Step Process to Get your Project Ready for Expert Stain & Seal
EXPERT Clean Up Degreaser – Concentrated Pre-Treatment & Oil Stain Remover | Essential St...
From: $80.00- Maximum Concentration Power: Pure concentrate delivers 5x the cleaning power. One gallon makes 5 gallons of working solution
- Dual-Strength Options: Dilute 4 to 1 for standard cleaning, keep undiluted concentrate for tough stain spills on concrete
- Massive Value: No paying for pre-diluted water. One gallon concentrate equals 5 gallons of competitor
- Professional Efficiency: Mix exactly what you need for each project. No waste from large pre-mixed containers.
- Convenient Dispensing: Built in spout allows precise measuring and easy pouring without mess.
- Extended Shelf Life: Concentrated formula stays stable longer than pre-diluted solutions & storage Convenient
EXPERT Clear Wood Stain & Seal | Oil Based Deep Penetrating | Great For Hardwoods & IPE W...
From: $65.00- Clear Protection
- Deep Penetrating Oil Through Entire Wood For Exceptional Protection
- Prevents Drying Out which causes warping and cracking
- Non-Film Forming Won't chip, crack or peel
- Mildew & UV Resistant - Maintains Color
- Water Shedding
- Extreme Climate Can Apply -10°F to 110°F
- Ultra Low VOC < 7 g/L
- Rain-safe soon as 1 hour after applied to fences
- Easy one coat application
- Easy Maintenance - Recoat without stripping, sanding or scraping
- Works on IPE Wood
EXPERT Fence & Barn Paint | 100% Acrylic Agricultural Exterior Paint | Livestock Safe | 5 gallo...
$315.00- Long Lasting Performance
- Excellent Adhesion
- One Coat Coverage
- Durable in Harsh Weather Conditions
- Low VOC
- Formulated to work around Livestock
- Ideal for Wood & Metal Surfaces
- Professional Grade Finish
- Easy Clean up with Soap & Water
EXPERT Log & Timber Oil Fan Deck Samples | 7 Color Samples | Marketing Tool
$65.00- Great Sales Sample and Selling Tool
- Great Way To Visualize all 7 different Log & Timber Oil Stains
- Quickly Show Customers How You Can Make Their Wood Project Look
- Actual Production Stain
- Natural Wood Samples
- Made in the USA
EXPERT Log & Timber Oil Sample Kit | Choose Up to 8 Color Samples
From: $47.00- Sample Sets in 3 (You Select Colors) or all 8 color options
- Hand-Filled Premium Oil
- Professional Mixing System
- Convenient Testing Size of 4 fluid ounces per can
- Complete Range Testing
- Allows testing with EXPERT Stain on your wood project
- Timber Surface Testing
EXPERT Log & Timber Oil Stain | Semi-Transparent | Deep Penetrating | Apply -10°F to 110° | Rep...
From: $115.00- Deep Penetrating Oil Through Entire Wood For Exceptional Protection of Log Homes and wood surfaces
- Outstanding Protection & Color Longevity with double solids vs normal semi-transparent stains
- Superior Pest Protection from Citronella & 8 Essential Oils for outstanding natural defense against carpenter bees or wood boring insects
- Great Looking Semi-Transparent color highlights natural wood grain
- Excellent adhesion and Non-Film Forming Won't chip, crack or peel
- Prevents Drying Out which causes warping and cracking
- Mildew & UV Resistant - Maintains Color
- Water Shedding
- Extreme Climate Can Apply -10°F to 110°
- Safer Application with only 5% solvents results in Ultra Low VOC < 237 g/L
- Rain-safe soon as 1 hour after applied to fences
- Easy one coat application
- Easy Maintenance - Recoat without stripping, sanding or scraping
- 8 Semi-Transparent Color Options
- Works on IPE Wood
EXPERT Natural Defense-Essential Oil Wood Stain Enhancement| Traditional Pest Deterrent Properties
$79.99- Backyard- Safe Formula with low-toxicity alternative
- Essential Oil Blend that Safely Deters Carpenter bees, termites and 12+ outdoor pests
- Works with Any of Our EXPERT Line of Stains Transparent, Semi-Transparent, Semi-Solid and Log & Timber Oil
- Enhance Wood Care
- Pollinator Protection
- Premium Essential Oil Blend
- Dual Application System
- Comprehensive Pest Deterrant
- Pleasant Aroma
EXPERT Next Generation Wood Stripper Pro
$330.00- Multi-Surface Capability: Works on wood, concrete, brick, stone, meta, tile, fiberglass and other substrates
- Low-Odor Professional Formula: Advanced solvent blend minimizes odor while maintaining heavy-duty stripping performance
- No Neutralization Required: Unlike caustic stripping systems, surfaces can be rinsed clean with water after removal
- Flexible Application Methods: Apply by brush, roller or sprayer depending on project size and surface conditions
- Heavy-Duty Coating Removal: Designed to remove multiple layers of stain or paint in a single application when used correctly
- Adjustable Thickness for Different Jobs: Mix until paste consistency for vertical surfaces
EXPERT Semi-Solid Wood Stain & Sealer | Oil Based Deep Penetrating | Extreme Climate Apply -10°...
From: $75.00- Provides a rich color while allowing the natural grain to still come through
- Deep Penetrating Oil Through Entire Wood For Exceptional Protection
- Great Protection for medium to heavy foot traffic decks
- Prevents Drying Out which causes warping and cracking
- Non-Film Forming Won't chip, crack or peel
- Mildew & UV Resistant - Maintains Color
- Water Shedding
- Extreme Climate Can Apply -10°F to 110°F
- Ultra Low VOC < 7 g/L
- Rain-safe soon as 1 hour after applied to fences
- Easy one coat application
- Easy Maintenance - Recoat without stripping, sanding or scraping
- 9 Semi-Solid Color Options
- Works on IPE Wood
EXPERT Semi-Transparent Wood Stain & Sealer | Oil Based Deep Penetrating | Extreme Climate Appl...
From: $65.00- Richer semi-transparent color still highlights natural wood grain
- Deep Penetrating Oil Through Entire Wood For Exceptional Protection
- Prevents Drying Out which causes warping and cracking
- Non-Film Forming Won't chip, crack or peel
- Mildew & UV Resistant - Maintains Color
- Water Shedding
- Extreme Climate Can Apply -10°F to 110°F
- Ultra Low VOC < 7 g/L
- Rain-safe soon as 1 hour after applied to fences
- Easy one coat application
- Easy Maintenance - Recoat without stripping, sanding or scraping
- Works on IPE Wood
- 5 Semi-Transparent Color Options
EXPERT Stain & Seal Fan Deck Samples | 18 Color Samples | Marketing Tool
$65.00- Great Sales Sample and Selling Tool
- Great Way To Visualize all 18 different Transparent, Semi-Transparent and Semi-Solid Stains
- Quickly Show Customers How You Can Make Their Wood Project Look
- Actual Production Stain
- Natural Wood Samples
- Hand-Made in the USA
EXPERT Stain & Seal Sample Kit | Choose Up to 19 Wood Stain Color Samples
From: $47.00- See your real color results before buying gallons- no surprises
- Custom Pick Sample of real EXPERT Stain & Seal in 3, 6 or 19 color options
- See real colors on your actual wood type
- Choose from 19 rich, penetrating colors
- Helps you match your fence, deck, pergola or wood siding
- Oil-based, deep penetrating color — long-lasting protection
- Fast shipping — decide your color sooner
- Made in the USA
- Convenient Testing Size of 4 fluid ounces per can
- Allows testing with EXPERT Stain on YOUR wood project
EXPERT Transparent Wood Stain & Sealer | Oil Based Deep Penetrating | Extreme Climate Apply -10...
From: $65.00- Great Looking transparent color which highlights the natural wood grain
- Deep Penetrating Oil Through Entire Wood For Exceptional Protection
- Prevents Drying Out which causes warping and cracking
- Non-Film Forming Won't chip, crack or peel
- Mildew & UV Resistant - Maintains Color
- Water Shedding
- Extreme Climate Can Apply -10°F to 110°F
- Ultra Low VOC < 7 g/L
- Rain-safe soon as 1 hour after applied to fences
- Easy one coat application
- Easy Maintenance - Recoat without stripping, sanding or scraping
- 4 Transparent Color Options
- Works on IPE Wood
Extension Pole 4′-8′ ft
$75.00- Attach 9" or 18" roller frames to this versatile pole to install beautiful floor coatings or extend reach on vertical walls
- The pole extends from 4 to 8 feet
- Roller Frames sold separately
Extreme Bond Primer For Interior Exterior Hard Slick Glossy Wall Surfaces
- Promotes adhesion and bonding on hard to paint surfaces
- Glazed Tile, Plastic, Glass, Fiberglass, Glossy Surfaces, Kitchen Cabinets
- Tightly bonds to slick and glossy surfaces
- Assures uniform appearance of topcoats
- One coat application
- Fast dry
- Use as bonding primer with Cool Coat Thermal Barrier Paint
- Topcoat With Hi-Performance coatings such as epoxy, polyaspartic, urethanes, lacquers and both oil and water based acrylics
EZ- Bond Primer | Excellent Adhesion & Corrosion Protection | Self- Leveling | Primer for Galva...
From: $85.00- Used on practically any surface
- Excellent Adhesion
- Corrosion Protection
- Self-Leveling Product
- Eco-Friendly Formula
- Concrete, Drywall, Masonry, Wood, Stucco and Fiberglass Applications
- Galvanized Metal and Aluminum Applications
- Topcoat with wide variety of high-performance topcoats like Urethanes, Alkyds, Latex, Acrylic and Epoxy
EZ-Coat Smooth Acrylic Coating | Metal, Wood, Concrete | Smooth Finish | Scratch Resistant
From: $60.00- Excellent flow rate for an Easy application
- Flexible and not brittle
- Easy to touch up or maintain
- Low Odor
- Low VOC
- Scratch Resistant Finish
- Protects Substrates from weathering - UV & Moisture
- Smooth Finish
- Interior and Exterior Surfaces
EZ-Coat Textured Acrylic Coating | Metal, Wood, Concrete | Textured Finish | Scratch Resistant
From: $60.00- Excellent flow rate for an Easy application
- Flexible and not brittle
- Easy to touch up or maintain
- Low Odor
- Low VOC
- Scratch Resistant Finish
- Protects Substrates from weathering - UV & Moisture
- Textured Finish
- Interior and Exterior Surfaces
Fan Deck Marketing Tool | Flakes & Chips | Quartz Granules | Epoxy Pigment | Metallics Pigments
$55.00- Great Sales Sample and Selling Tool
- Great Way To Visualize 52 different floor colors and flake options
- Quick Way To Show Customers How You Can Make Their Floor Look Great
- 52 Different Color Choices & Blended Flakes From Floorguard Products
Fastonite E700 Heavy Duty Pool & Fountain Coating | Fiberglass | Concrete | Shotcrete | Gunite ...
From: $90.00- Swimming Pools / Fountains : Designed for use on fiberglass and plaster pools subject to chlorine and UV exposure
- VOC free
- 100% Solids System
- Ambient Curing
- High Chlorine Resistance
- Good wear protection to foot traffic
FeltPen Graffiti Shadow Stain Remover & Concentrated Cleaner | Paint, Ink, Dye, Organic Stains
From: $39.00- Unique UV sensitive formulation draws inks and other stains out of surfaces.
- Can be used while BARE BRICK STONE & MASONRY REMOVER or SENSITIVE SURFACE REMOVER is still on the stain OR after dissolving as much of the graffiti as possible using these removers (choice of remover depends on type of substrate.)
- Excellent for removing leather dyes and inks that have shown resistance to removers, ‘burnt into’ / stained paintwork or coated surfaces, or wrapped into porous surfaces creating a stain.
- When diluted, creates a highly active cleaner for use cleaning smoke films, greasy marks, carbon deposits, food spills, mold, fungi, and other soilage.
- Biodegradable
Flake Sales Sample Kit With Real Vinyl Flakes | 145 Solid Colors | 9 Signature Blends
$75.00- Great Sales Sample and Selling Tool
- Actual Loose samples of all 145 solid colors flakes available and 9 popular Signature factory blends
- Samples of all 6 size flake options from 1/32" to 1"
- Great way to help create and visualize your own unique custom flake blend
- Quickly Show Customers How You Can Make Their Floor Look Great using decorative Vinyl Flakes
Flat Floor Squeegee (case of 6) For Epoxy and Polyaspartic Coatings | 2 Sizes
From: $160.00- Your choice of 18" and 24" Sizes
- Comes in economical case quantity 6
- For Quicker and Easier Application of thinner mil (thickness) floor coating systems
- Steel back and steel handle socket
- Stiff Grey rubber blade
- Makes installing floors a breeze
- This Squeegee is the best for installing medium and heavy bodied resins
Floor-lok Concrete Floor Sealer and Curing Aid Concentrate
$179.00- Concrete Floor Sealer, Dustproofer, Curing Aid
- Clear Silane Siloxane Formula
- Penetrating Leaves No Film
- Will Not Yellow
- Water Base, Low VOC, Eco-Friendly
- 1 Year Labor / Material Warranty
- Specified by Architects in 099123
Floorguard Sales Samples on Hard 5″x5″ Boards of Flake/Chip & Pigment Color Options...
$425.00- Great Sales Sample and Selling Tool
- 66 Hard 5" x 5" Actual Color and Flake/Chip Samples
- Great Way To Visualize 66 different floor colors and flake options from Floorguard Products
- Quickly Show Customers How You Can Make Their Floor Look Great
Fluorescent (Black Light) Flakes for Epoxy, Polyaspartic, Urethane Coatings
From: $3.00- Adds a Bright Colorful look to any epoxy, polyaspartic, polyurea, urethane Indoor flooring project
- Dramatic & Vibrant Appearance when subject to Black Lights!
- 6 Different Florescent Colors
- 1/4" Standard & 5 options: 1/32", 1/16", 1/8", 1/2", 1"
- Hide sub-surface imperfections
- Add as an accent to any vinyl chip/flake blend
- Create your own custom florescent blend for a completely florescent look
- USE OUR COLOR VISUALIZER TO SEE WHAT YOUR CUSTOM BLEND WILL LOOK LIKE
Quantity Discounts AvailableSOLD IN 5 LB BOX
Garnet Anti-Slip Additive| BROWN | 36 Grit | Non-Skid Tough Durable Floor
From: $35.00- Adds very tough skid resistance & texture profile to a surface
- Works well with high performance 2 part pigmented floor coatings
- Non-reactant – will not interfere with your coatings
- Well bonded into the body of the coating
- Long lasting for extended anti-slip performance
- Cost–effective – highly effective
- Non-toxic – inert and natural, crystalline silica levels are less than 1%
- Comes in the most popular 36 grit size
- Low Cost alternative to white colored aluminum oxide for only slightly less level of anti-slip performance
GasPruf E132 Reinforced Epoxy Coating
From: $215.00- Anticorrosive Coating: "Super-Duty" anticorrosive for in-service fuel storage tank interiors and roofs
- Repair Compound: Patching, leak sealing etc. above and below water or hydocarbon fuels
- Displaces water or hydrocarbons such as gasoline or diesel fuel from wetted surfaces
- Solvent Free
- 100% Solids
Gauge Rake 24 in “Sled Type” For Smooth Application Cementitious, Slurry, Thick Coatings
$50.00- Apply high build urethane and epoxy slurry, mortar and coatings and cementitious materials at a precise, predetermined uniform depth
- T-Skates adjust from 0 to 2 inches
- Thin sleds make a minimal disturbance in application
- Tool is lightweight, yet sturdy
- 24" wide
Gloss Sealer For Masonry and Wood | Premium Grade Acrylic
From: $45.00- Premium Grade Sealer and Water Repellent Offering a Nice Glossy Look
- For Concrete, Masonry, Brick, Wood
- Use on Painted or Unpainted Surfaces
- Adds Stain Resistance for Easier Cleanup
- Clear Finish Will Not Yellow
- To 5 Year Satisfaction Guarantee
- Eco-Friendly and Easy To Apply
Glow Anti- Slip Sand Sample Kit | Aqua, Blue & Green | Photoluminescent for Floor Coatings
From: $48.00- Ideal for use with epoxies, polyaspartics, urethanes and polyurethanes
- Mix with clear epoxies and concrete sealers to create glow in the dark floors
- For use in both indoor and outdoor projects
- Fine Sand Texture
- Provides light anti- slip texture to floor coating
- High Temperature Resistance
- Anti-Slip Glow Sand Kit comes in Green (30 grit), Blue (65 grit) and Aqua (110 grit)
Graff-Attak-Pak | Bundle Graffiti Removal Kit | Biodegradable
$185.00- Highly effective biodegradable professional grade graffiti remover
- Stays wetter longer ensuring maximum dwell time, making it ideal for hot weather removals.
- Great for porous concrete, brick, stone, wood as well as removing graffiti from tough split faced block, cinder block and exposed aggregate surfaces
- Safe and effective for use on all types of natural stone (such as limestone, granite, and marble), stainless steel, trees, plastics, and playground equipment
- Virtually odorless and non toxic.
- Easily rinsed with a small pressure washer requiring very little rinsing water. (Any resultant run off is a readily biodegradable gray water soap which can be left to biodegrade, recycled or further diluted for use in gardens etc.)
- No shadows, no damage, no harsh scrubbing required.
- Safe and effective for removals on asphalt roads
Graffiti Removal Spray Can & Wipe Value Pack
$500.00- All in one solution for effective Graffiti Removal
- Save Money with this Bundle
- Ideal for cities, schools, facilities, grounds maintenance, DIY property owners and contractors
- Training materials included
- Highly effective biodegradable professional grade graffiti remover
- Great for porous concrete, brick, stone, wood as well as removing graffiti from tough split faced block, cinder block and exposed aggregate surfaces
- Safe and effective for use on all types of natural stone (such as limestone, granite, and marble), stainless steel, trees, plastics, and playground equipment
- Virtually odorless and non toxic.
- Easily rinsed with a small pressure washer requiring very little rinsing water. (Any resultant run off is a readily biodegradable gray water soap which can be left to biodegrade, recycled or further diluted for use in gardens etc.)
- No shadows, no damage, no harsh scrubbing required.
- Safe and effective for removals on asphalt roads
Graffiti Safewipes | Quick, Easy Graffiti Removal | Smooth Surface | Pen, Crayon, Markers, Paint
From: $37.00- Versatile multi-use towelette for quick and easy removal of graffiti and other marks from painted and smooth surfaces
- Fast acting, non-damaging formula encapsulates and suspends graffiti and other marks so you can wipe away easily without smearing / smudging or re-depositing into coated surface
- Pleasant smelling and non toxic
- Safe and effective to use on most smooth surfaces
- BIODEGRADABLE liquid
- Cleans and disinfects (kills) staphylococcus, streptococcus, E. coli and salmonella
- Comes in convenient multi-pack containers of 20, 30, 70 wipes for easy transport
Green Safety Glow in the Dark Tape | Stairways, Steps, Emergency Exit, Walkways, Ramps | 24 Hour Glo...
From: $19.95- Glow time is 24 hours
- Suitable for Indoor and Outdoor Applications
- Water Resistant
- Works on wood, vinyl, plastic, leather, metal and laminate
- Excellent adhesion, rechargeable and clean removal
- Meets Glow Time required by the International Building Code
Grip E751 | Annulus Void Filler | High Temperature Tolerant | Long Working Time
$1,600.00- Fills large void areas and annulus
- Low exotherm and low viscosity
- Solvent Free Formulation
- No VOC or odor concerns
- Long Pot Life
- Ability to work in High Temperature Climates
GroundWorx Basics (SF) ESD Static Conductive Epoxy Floor Coating | Water Based | ANSI/ESD S20.20-201...
From: $1,083.00- Conductive 2 Part Water Based Thin Film Epoxy Floor Coating
- Conductive range 2.5 x 104 - 3.5 x 107 ohms
- System Resistance (w/ ESD Footware) < 3.5 x 107 (fully compliant) ANSI/ESD STM 97.1
- Warrantied ANSI S20.20 performance
- Meets ANSI/ESD S20.20-2014 (S97.1 and S97.2), DOD 4145.26M, HDBK263A
- Easy to Install
- For Concrete, Wood, VCT Tile Floors
- Use in Electronics Mfg, Assembly, ESD Protected Areas
- 6 Colors. Pewter Gray Color available for immediate shipment
GroundWorx Basics (SF) ESD Static Dissipative Epoxy Floor Coating | Water Based | ANSI/ESD S20.20-20...
From: $1,083.00- Static Dissipative 2 Part Water Based Thin Film Epoxy Floor Coating
- Static Dissipative 10e6 to 10e9 ohms
- Warrantied ANSI S20.20 performance
- Meets ANSI/ESD S20.20-2014
- Easy to Install
- For Concrete, Wood, VCT Tile Floors
- 6 Colors.
- Static Dissipative version of Groundworx is special order 4-5 week lead time. Most projects use the Conductive Version of GroundWorx with immediate shipment of Pewter color
GroundWorx Ultra (HB-97.2) ESD Static Conductive Epoxy Basecoat 100% Solids | Forklift Traffic | ANS...
From: $555.00- Static dissipative or conductive high build epoxy electrical protection when used with the GroundWorx Ultra ESD Urethane Topcoat which comes in either dissipative >1.0 x 10e6 ohms or conductive <1.0 x 10e6 ohms electrical resistance, limiting Static Charge Generation to <15 volts
- Great for high traffic, high wear commercial & industrial applications as high build 14 mil ESD system at <$4.00/sq' material cost
- Use on Concrete, Wood and old VCT surfaces
- Moisture tolerant primer
- Excellent adhesion 350 psi
- 100% solids, 0 g/L voc
- Conforms to ESDA, ANSI standard S20.20-2014 when used with GroundWorx Ultra ESD Urethane Topcoat
- Gloss sheen
- 8 standard colors & custom colors available
GroundWorx Ultra (HB-97.2) ESD Urethane Top Coat | Static Dissipative or Conductive | ANSI S20.20-20...
From: $1,350.00- Optional Static conductive <1.0 x 10e6 ohms or Dissipative >1.0 x 10e6 ohms and <1.0 x 10e9 high performance electrical protection, limiting Static Charge Generation to <15 volts
- Great for high traffic, high wear commercial & industrial applications as high build 14 mil ESD system at <$4.00/sq' material cost
- Conforms to ESDA, ANSI standard S20.20-2014 when used with GroundWorx Ultra ESD Epoxy Primer
- Use on Concrete, Wood and old VCT surfaces
- Tough surface: impact resistance 140 psi and tabor abrasion test 25 mg loss
- Surface: Anti-slip, ROHS compliant
- No wax required – easy to keep clean
- Satin to Semi-gloss sheen
- 8 standard colors & custom colors available
- Each 2 gallon kit includes 8 oz anti-slip clear glass beads for improved safety in wet conditions
GroundWorx Ultra Elevated Moisture Epoxy Primer | For Use In GroundWorx Ultra Epoxy Systems | Zero V...
$650.00- Protects ESD Coatings System from moisture related issues (withstands up to 8lbs of moisture vapor pressure)
- Apply when relative humidity is up to 95%
- Significantly reduce chance of concrete outgassing
- Great for high traffic (forklift & pallet jack), high wear commercial & industrial applications
- Conforms to ESDA, ANSI standard S20.20-2014 when used with the GroundWorx Ultra ESD Epoxy Basecoat
- Concrete Applications
- Zero VOC
GT 6759 100% Silicone Roof Coating
$300.00- Ready to Use
- Highly Elastomeric
- Breathable membrane
- Superior weather and wat er resistance properties
- Excellent, long term durability
- Solvent and chemical resistant; UV Stable
- High Temperature Resistance (up to 350F)
- Reflects more sunlight than a traditional roof
- Solvent free/ diluent free
- Higher solids content
- less material needed and time saving due single coat applications
- Due to the high solids content, no pinholes or mud cracks appear after curing
- 100% silicone polymer, allowing it to expand and contract helping prevent leaks that may result in mold, mildew, wood rot and rust
- Withstands UV degradation
- Environmentally friendly
GT 6783 Low Solids Silicone Roof Coating
$290.00- More economical price per bucket
- Easier to spray and no need for specialized equipment
- Better sag resistance on sloped surfaces where two coat application is preferred such as high-sloped roofs and spray foam roofs
- Perfect for two-coat substrates
- Low solids coating can be used on existing asphalt roofs if an effective bleed block barrier is used to prevent the mineral spirits form attacking the asphalt
- An epoxy primer could be used for this purpose
- A low solid coating can be used without a primer on a single ply deck such as TPO, PVC, PPO , EPDM. The mineral spirits will cause the deck to swell improving adhesion.
- Ready to Use
- Highly Elastomeric
- Breathable Membrane
- Superior weather and water resistance properties
- Excellent ,long term durability
- Solvent and chemical resistant; UV stable
- High temperature resistance up to 350F
GT 6895 High Solids Silicone Roof Coating – High Build
$310.00- Can be applied up to 40 mils in single pass on roofs and vertical walls when needed
- 100% silicone polymer, allowing it to expand and contract helping prevent leaks that may result in mold, mildew, wood rot and rust
- Ability to achieve a coating of 40 mils in one pass
- Ready to Use
- Highly Elastomeric & breathable membrane
- Superior weather & water resistance properties
- Excellent, long term durability
- Chemical Resistant and UV Stable
- High Temperature Resistance up to 350F
- Reflects more sunlight than a traditional roof ; absorbs less solar energy
- Solvent Free & diluent free
- Higher solids content
- Less material needed and time saving due single coat applications
- Due to the high solids content, no pinholes or mud cracks appear after curing
- Withstands UV degradation
- Environmentally friendly
H20 HyperPRIME Epoxy Quick Cure Bonding Primer | Low Temp 45°F | 3 Hr Recoat
From: $40.00- Excellent Substrate Penetration with superior adhesion 450 psi
- Great for concrete, wood and metal surfaces
- Helps protect Against Coating Damage from Outgassing of Concrete
- Quick Cure With 3 Hour Recoat Time - great for 1 day floor coating systems
- Available in Clear plus 6 Colors
- Water Base, No Offensive odors
- Cold temperature application down to 45F
- Good chemical and Stain Resistance
- Easy Application
H20 zioTHANE Low Gloss Urethane Concrete Floor Sealer / Topcoat
From: $89.00- Tough, Durable Concrete Floor Sealer
- Topcoat for Epoxy Floor Coatings
- Excellent Chemical and Abrasion Resistance
- Exceptional Impact Resistance
- Aliphatic, UV Stable and Will Not Yellow
- Beautiful Clear, Low Gloss Appearance
- Designed for High Traffic and Industrial Areas
- Water Based, Low voc <10 g/L
H20 ZioTHANE Semi-Gloss Urethane Concrete Floor Sealer/Topcoat
From: $89.00- Tough, Durable Concrete Floor Sealer
- Topcoat for Epoxy Floor Coatings
- Excellent Chemical and Abrasion Resistance
- Exceptional Impact Resistance
- Aliphatic, UV Stable and Will Not Yellow
- Beautiful Clear, Semi Gloss Appearance
- Designed for High Traffic and Industrial Areas
- Water Based, Low voc <10 g/L
HDK H18 Fumed Silica Thickening Agent For Epoxy Concrete Crack and Joint Repair | (10kg) 22 lbs | W...
$475.00- Great thickening agent for use with wide range of epoxy, polyurethane and other coatings
- Allows coatings to be used as great concrete crack, hole, spall and control joint repair for larger projects
- When mixed into fast acting products, makes for very quick repairs
- Many other industrial uses
- Comes in (10 kg) 22 lb bags
****TRUCK FREIGHT SHIPPING ONLY - ONLY SELL IN LOTS OF 5 BAGS****
Heel Grounders for ESD Floor Protection
From: $35.00- Compliant with ANSI/ESD S97.2, ESD SP9.2, ANSI/ESD S20.20, IEC 61340-5-1
- Two layer heel rubber
- Black conductive exterior – 10e4 ohms
- White insulative interior prevents carbon marking on shoes
- 1 meg ohm resistor
- Conductive ground ribbon measuring 14.5” x .5"
- Plastic parts comprised of anti-static nylon material
Heritage Graffiti Remover | For Sensitive Historic Important Buildings | Stonework Brickwork Masonry...
From: $39.00- Fast-acting penetrating formula encapsulates and dissolves spray can and other stains from behind as well as the front.
- Easily rinsed with a small pressure washer requiring very little rinsing water. Any resultant runoff is a readily biodegradable gray water soap which can be left to biodegrade. Recycled or further diluted for use in gardens etc.
- No shadows, no damage, no harsh scrubbing required.
- Pleasant smelling and nontoxic.
- Safe and effective to use on all types of natural stone (such as limestone, granite, and marble), stainless steel, trees, plastics, and playground equipment.
- May be used on painted surfaces as well as natural surfaces.
- Biodegradable
Home Sports Team Insignia Vinyl Flake Series | Football-Inspired | 62 Blends | 6 Sizes
From: $3.00- Bring team spirit to your space!
- Inspired by your favorite sports team!
- Hide sub-surface imperfections
- 35 Different Pre-Mixed Color Blends to Choose From!
- 6 Sizes options: 1/32", 1/16", 1/8", 1/4", 1/2", 1"
- Optimal flexibility and strength
- Colorfast, UV stable pigments
- Low sound / noise deadening qualities
- Hide future scratches or stains on floor surface
SOLD IN 10 LB BOX
Hybrid Stone Flakes | Multi-Sized | For Epoxy, Polyaspartic, Urethane Coatings
From: $3.00- Decorative Natural Stone Look
- 12 Different Stone Color Blends to Choose
- Adds a decorative look to any epoxy, polyaspartic, polyurea, urethane flooring project
- Random multi-sized flakes create a real stone appearance
- Hide sub-surface imperfections
- Optimal flexibility and strength
- Colorfast, UV stable pigments
- Low sound / noise deadening qualities
SOLD IN 10 LB BOX
Hydro-Lok™ Fabric Super Hydrophobic Liquid Repellent
From: $34.00- Super-Hydrophobic Liquid Repellent With Nano Technology
- Superior Protection Against Wide Range of Liquids Means Excellent Stain Resistance
- Dries Completely Clear
- Non-Flammable and Very Low Odor
- IDEAL FOR: Work Boots | Gloves | Running Shoes | Tents | Awnings | Patio Furniture | Back Packs | Wood | Leather | Mail Boxes | Convertible Tops | Canvas | Baby Clothes | Outdoor Pillows | Boat Covers | Car Seats | Jackets
HyperBOND Epoxy | Wet Condition Moisture Tolerant | Concrete Floor Coating | Low Temp 40F | 100% Sol...
From: $60.00- Tough, Durable Epoxy Coating
- Outstanding Bonding
- Water Insensitive and Can Be Applied In Wet Conditions
- Withstands up to 9 lbs. of hydrostatic pressure
- Cold temperature application down to 40F
- Long 30-35 min working time
- Resistant to Blushing/Sweating
- Good chemical, impact and abrasion resistance
- High solids 100%
- Available in clear & 12 colors! (Pigment sold separately). In 3 gallon kits only, available pre-colored in 3 colors
HyperCURE Concrete and Wood Repair Kit | Flexible 100% Elongation | Quick Cure | Easy To Apply | Rec...
$165.00- HyperCURE is designed for repairing concrete cracks, joints, spalls and damaged areas before installing coating.
- Cures quickly allowing coating installation same day
- Superior Flexibility 100% Elongation
- Outstanding Bonding
- Fast Cure - 15 to 30 min recoat
- Rapid Cure Rate For Same Day System Application
- High D70 Hardness
- High Tensile & Tear Strength
- Very Easy to Use
- Tough, Durable Epoxy Concrete and Wood Crack Repair, Hole, Spall and Control Joint Filler
HyperFLEX Epoxy | Flexible Membrane Concrete Wood Steel | 150% Elongation | Low Temp 40°F | Quick Cu...
From: $74.00- Tough, Durable Epoxy Coating and Flexible Membrane
- Very Flexible with Elongation rating 150% @ASTM D-638
- Great for Quick Crack Repair and Control Joint Filler (when mixed with Fumed Silica)
- Can be used as a (1) basecoat for full broadcast floors, (2) flexible membrane, (3) repair gel to fill joints, cracks, & divots
- Cold temperature application down to 40°F
- Concrete & Wood Floors and Countertops
- Superior Flexibility and Outstanding Bonding
- Rapid Cure Rate For Same Day Flake and Solid Color System Application (recoat 2 hours at 75F)
- When used as membrane or basecoat HyperFLEX cures about 2 hours
- When used for gel repair cures about 10-15 minutes
- Good chemical and abrasion resistance
- High solids 100%
- Withstands up to 9 lbs. of hydrostatic pressure
- Available in clear & 13 colors! (Pigment sold separately)
HyperFLOW Metallic Epoxy
From: $285.00- Low VOC Formulation
- low Odor
- Extreme Flowability
- Extended Working Times
- Low Viscosity
- High Gloss Reflective Finish
- High Compressive Strength
- Chemical & Impact Resistant
- Superior Adhesion
- Optimal Pigment Dispersion
HyperREZ UV Epoxy Concrete Floor Coating | 45 min Work time | 100% Solids | Ultra Clear Great for Me...
From: $70.00- Tough, durable epoxy floor and countertop coating
- Cold temperature application down to 40F
- High Build Applications up to 32 mils/coat (50 sq'/gal)
- Long Working Time
- Good chemical and abrasion resistance
- UV Resistant
- High gloss appearance
- Designed for high traffic and industrial areas
- High solids 100%
- Withstands up to 9 lbs. of hydrostatic pressure
- Available in clear & 14 colors (Colored Pigment Sold Separately)
Hot
IronBack Steel Primer | Convert, Encapsulate, Stop Rust | Topcoat With Water & Oil Based Paint
From: $130.00- Reduce or eliminate grinding and dangerous sandblasting
- Converts and encapsulates steel to prevent future rusting
- Compatible with water and oil-based paints
- Contains no VOCs. Non-toxic. Environmentally friendly
- Converts rusted surfaces to stable black metal.
- Ready-to use, non-toxic, and environmentally friendly.
- Contains no VOC’s. Fast clean-up.
- Steel sheds and other steel structures
- Interior and Exterior Rusty Steel Surfaces
Jiffy Mixer for Epoxy, Polyaspartic, Urethane & High Viscosity Liquids | Stainless | Minimize A...
From: $24.99- Properly Mix High Viscosity Liquids (not just stir)
- Required Tool to Mix Epoxy, Urethane, Polyaspartics
- Mix Foam, Glue, Mortar, Paint, Resin, Cement
- Heavy Duty Construction for Industrial & Commercial
- Two Sets of Specialty Welded Blades
- Won't Splash or Suck Air
- Cuts Mixing Time up to 90%
- 304 Stainless Steel Construction
- Available in 3 sizes for most any mixing job
- Easy to Use with Electric Power Drill
- 100% Made in America
Looped Nap Roller Covers 9″ & 18″ | Case of 12 | For Heavy Aggregate Epoxy and Uret...
From: $85.00- Great for applying coarse aggregate epoxy coatings and urethane slurries
- Use with all texture paints
- Durable, plastic looped material applies paint and creates decorative effects in one step
- Looped vinyl material
- Phenolic core resists water, solvents, and cracking
- Available in 9" and 18" wide sizes
- Comes in Case of 12 Roller Covers
Mark-IV | Joint Clean-Out Saw
$2,045.00- Electric, portable joint clean-out saw ideal for joint clean-out, joint filler removal, decorative concrete and concrete cutting
- Adjustable blade depth up to 2 cutting depth (with 8 blade)
- Powered by a Metabo 15 Amp W24-230 (6,600 RPM)
- Up-cut Blade rotation cleans debris out of the joint
- Solid aluminum chassis provides a durable and stable machine to allow for straight, accurate cuts
- The Vacuum Port allows for dust-free operation
- Made in the USA
MDR HD 100 Cleaning Solution | Silane/ Siloxane Blend | Concrete, Wood, Masonry, Paver
From: $110.00- Excellent for removing virtually all deposits including rust, mineral and metal oxide stains
- Reduces liability and environmental impact
- Removes tannin stains and brightens wood
- Interior uses- Only use in well ventilated area
- Reduces presence of water, which prevents efflorescence
Hot
Mend-Con RTU Concrete Repair | Wet Conditions & Underwater | Vertical No Sag | Quick Cure | Pai...
$470.00- Repair in Wet conditions - Apply Underwater
- Great for Pool Repairs
- High strength epoxy
- Bonds to fresh or hardened concrete, stucco, wood, metal
- No Sag No Drip Formula - perfect for Vertical, Overhead or Horizontal surfaces
- Quick Cure Dries to touch 15 minutes, paint in 1 hour and drive on it in 8 hours (temperature dependent)
- 2x as strong as most concrete - Compressive strength 8000 psi
- Easy To Apply – Convenient ready-to-use cartridge system
- Wide application temperature 40°F – 100°F
- Paintable surface
- Comes in Case of 12 Cartridges & Cartridge Gun
Metallic Epoxy Color Pigment | Marbled 3-D Look | Pearlescent | Translucent 4oz (113g)
From: $19.99- Create a Beautiful Metallics Epoxy Floor System
- Vibrant and Exciting Pearlescent looking colors
- 3 Dimensional Marbled Appearance
- Unlimited Designs - Endless Possibilities
- 50 Different UV Resistant Colors
- See our 5 new Color Shifting, unique Multi-Colored pigments
- Add Metallics Pigment to HyerREZ UV Epoxy Or E671CL Epoxy as Part of 3 Step System
- Floor & Countertop projects on concrete and wood
- Pigment ships as Powder in Easy to Use 4 oz Container
Metallic Epoxy Pigment Display Board | 9 Popular Metallic Pigment Colors | Marketing Tool
$50.00- Great Sales Sample and Selling Tool
- Great Way To Visualize 9 different Metallic Epoxy Pigments
- Quickly Show Customers How You Can Make Their Floor Look Great using decorative Metallic Pigments
- Actual Metallic Epoxy Pigments on Mounted Samples
Metallic Epoxy Pigment Fan Deck Samples | 51 Dramatic Colors | Marketing Tool
$40.00- Great Sales Sample and Selling Tool
- Great Way To Visualize 51 different metallic floor color combinations
- Quickly Show Customers How You Can Make Their Floor Look Great using 3-D, Pearlescent and Translucent Metallic Pigments
- Actual Metallic Pigment Samples Applied over a Solid Color Primer
Metallic Epoxy Pigment Pairing Display Board | 6 Color Multi-Color Blend Examples | Marketing Tool
$50.00- Great Sales Sample and Selling Tool
- Great Way To Visualize 6 different Metallic Epoxy Pigment color blend combinations
- Quickly Show Customers How You Can Make Their Floor Look Great using decorative Metallic Pigments
- Actual Metallic Epoxy Pigment Pairings on Mounted Samples
Metallic Pigment Sample Kit With Actual Pigment Powder | 12 Popular Colors
$35.00- Great Sales Sample and Selling Tool
- Actual samples of 12 popular Metallic Pigment colors available
- Great way to help create and visualize your own unique marbled, pearlescent looking floor
- Quickly Show Customers the most popular color options which can be used individually or used on the same floor
Mica Enhanced Flake Blend | 26 Blends | For Epoxy, Polyaspartic, Urethane Coatings
From: $3.00- Decorative Look with Mica and Polymer Flakes
- 26 Blends to Choose From
- Adds a decorative look to any epoxy, polyaspartic, polyurea, urethane flooring project
- Mica Adds Shimmer/ Reflective Highlights to Regular Polymer Flake Blends
- Hide sub-surface imperfections
- Optimal flexibility and strength
SOLD IN 10 LB BOX
Mica Metallic Flakes for Epoxy, Polyaspartic Floor Coatings | Real Natural Mica Crystalline Beauty
$150.00- Unique Natural Metallic Luster Made From naturally occurring Mica Silicate Minerals
- Adds a decorative look to any epoxy, polyaspartic, polyurea, urethane flooring project
- Hide sub-surface imperfections
- All Flakes Available in 3 sizes
- 18 Pre-Mixed Color Blends
- 7 Solid Colors
- All Colors Can be Custom Mixed To Your Specs
- Excellent Chemical Resistance
- Extraordinary Resilience
- Low sound / noise deadening qualites
- USE OUR COLOR VISUALIZER TO SEE WHAT YOUR MICA METALLIC FLAKES WILL LOOK LIKE
Quantity Discounts AvailableSOLD IN 10 LB BOX
Micro-seal HD Silane Siloxane Water Repellent | 100% Solids | Concrete Brick Block Stucco | Clear No...
From: $70.00- Best in Class Multi-Surface Moisture Protection
- 100% Solids
- Double the solids of the original Micro-Seal
- Used on Construction Projects Worldwide
- Clear Penetrating, No Change in Appearance
- 10 Year Labor / Material Warranty
- Water Base, Low VOC, Eco-Friendly
Micro-Seal SiH4 100% Silane Deep Penetrating Water Sealer | UV Resistant | Concrete | Stucco | EIFS ...
From: $120.00- Small Particle Size for Deeper Penetration and longer lasting results
- Will not yellow, haze, crack or peel
- Overspray Does not etch metal or glass
- No film formation - does not change looks of the surface
- Allows substrates to breathe without trapping moisture
- Reduces rebar rusting in concrete and surface erosion from salts
- Can be subjected to wheeled or vehicular traffic immediately after application
Micro-seal Silane Siloxane Water Repellent | Concrete Brick Block Stucco | Clear Non Film Forming | ...
From: $35.00- Best in Class Multi-Surface Moisture Protection
- Used on Construction Projects Worldwide
- ASTM Tested to Stop 98 mph Wind Driven Rain
- Clear Penetrating, No Change in Appearance
- 10 to 20 Year Labor / Material Warranty
- Water Base, Low VOC, Eco-Friendly
- Specified by Architects in 03300, 04220, 07190, 099123, 09960
Micro-Seal With Graffiti Control & Water Repellent For Porous Wall Surfaces
From: $125.00- Protect Unpainted Walls From BOTH Graffiti Attacks & Wind Driven Rain in ONE Product
- Save Time & Money Using Less Labor
- Flat Sheen for Little Change in Appearance
- Water Based, Low VOC, Eco-Friendly
- Up to 20 Year Warranty
- Specified by Architects in 07190 / 099623
MuralGuard Clear Anti-Graffiti Coating | Protect Murals & Public Art to 15 Years | Non-Sacrific...
From: $44.00- Outstanding Protection of Painted Murals and other Public Art projects
- Warranted to sustain repeated graffiti removals to 15 years
- Easy to Clean Graffiti Removal with Level 10 Cleanability Level (ASTM D6578/D6578M-13) & Level 1 Cleanability (ASTM D7089-06)
- Over 160 graffiti cleaning cycles without damage to this tough, 2 part coating
- Easiest graffiti removal is wiping with acetone solvent and no water rinse required
- UV Resistant Will Not Yellow
- Zero VOC- SCAQMD Compliant
- Comes in a Clear, Matte, Satin and Gloss finish
- Excellent Adhesion
- Great Chemical Resistance
- Long POT Life up to 1.5 to 2.0 hours
MV2112 Moisture Vapor Barrier Primer Epoxy For Concrete Floors | ASTM F3010
From: $473.00- Reduce effects of moisture vapor transmission on concrete floors
- Control moisture vapor emission rates to 20 lb/24hr/1000 sq’ (ASTM F1869) or between 75% and 95% for ASTM F2170
- Superior moisture vapor control
- Class I Vapor Diffusion Retarder with perm rating of <.10
- Primer to protect Polymeric coating systems, vinyl sheets, tile, cementitious overlays, terrazo, wood veneers, and carpet
- 100% solids with 0 voc
- Meets ASTM F3010 for vapor permeance at the recommended thickness
NE253 Novolac Colored Epoxy Acid Solvent Chemical Resistant High Build
From: $55.00- Outstanding Spill & Splash Acid, Solvent, Chemical protection
- Resistant to high concentration acids, some chlorinated solvents incl xylene, MEK
- Resists wide range of chemicals, solvents and acids
- High build for heavy duty traffic projects, chemical troughs and curbs
- Great for tanks and chemical spill areas for cement, masonry or brick
- Excellent adhesion 425 psi
- Quick back in-service, light foot traffic 10-18 hrs
- Selection of 3 color options
- Low voc 47 g/L
NE253SL Novolac Epoxy Colored Slurry Acid Chemical Resistant Floor Coating
From: $55.00- Outstanding Spill & Splash Acid, Solvent, Chemical protection
- Apply to 1/16" thick to resurface traffic, chemical spill areas
- Resists wide range of chemicals, solvents and acids
- Resistant to high concentrations of acids and even some chlorinated solvents incl xylene, MEK
- Excellent adhesion 425 psi
- Quick back in-service with light foot traffic 10-18 hours
- Selection of 3 color options
- Low voc 22 g/L
NE253V Novolac Vertical Wall Colored Epoxy Chemical Resistant Acid Solvent
From: $55.00- Outstanding Spill & Splash Acid, Solvent, Chemical protection
- Resistant to high concentration acids, some chlorinated solvents incl xylene, MEK
- Apply up to 10 mils on vertical walls
- Resists wide range of chemicals, solvents and acids
- Medium build for chemical troughs and curbs
- Great for tanks and chemical spill areas for cement, masonry or brick
- Excellent adhesion 425 psi
- Quick recoat 5-10 hrs
- Selection of 3 color options
- Low voc <40 g/L
NE255P Novolac Epoxy Primer/Sealer Flexible Crack Bridging Chemical Resistant
From: $55.00- Excellent crack bridging, flexible high build primer eliminates need to repair hairline cracks in chemical exposure areas
- Use for priming light to medium duty secondary containment
- Tough, durable coating for surfaces exposed to vehicle traffic
- Outstanding abrasion and impact resistance with only 5 mg loss Taber Abrasion test and 100 inch lbs Gardner Impact Test
- Excellent adhesion 450 psi
- 100% solids, zero voc 0 g/L
NE256 Novolac Clear Epoxy Acid Solvent Chemical Resistant Floor Coating
From: $55.00- Outstanding Spill and Splash Acid, Solvent, Chemical surface protection
- Exceptional resistance to wide range of chemicals, solvents and acids
- Medium to High build for chemical spill areas, troughs, curbs and tanks
- Use as clear color coating or base for chip/flake or aggregate systems
- Excellent adhesion 400 psi
- Low voc <31 g/L
NE256M Novolac Epoxy Mortar Acid Solvent Chemical Resistant Patch Kit/Resurfacer
From: $83.00- Outstanding Spill and Splash Acid, Solvent, Chemical surface protection
- Apply at 1/8" to 1/4" to resurface traffic and chemical spill areas
- Used in many chemical immersion projects, curbs, tanks and chemical troughs
- Resists wide range of chemicals, solvents and acids
- Excellent impact and abrasion resistance
- Selection of 4 color options
- Low voc <14 g/L
NE257P Novolac Epoxy Colored Primer Acid Solvent Chemical Resistant Floor Coating
From: $55.00
NE258P Novolac Epoxy Clear Primer Acid Solvent Chemical Resistant Floor Coating
From: $55.00- Excellent primer companion to our NE256 Novolac Clear Epoxy topcoat
- Helps reduce air release generation when applying higher solids novolac topcoats
- Outstanding Spill and Splash Acid, Solvent, Chemical surface protection
- Resists wide range of chemicals, solvents and acids
- Excellent adhesion 365 psi
- Long working time with 1 to 3 hour POT life
NE5928 Interior Expansion & Flexible Joint Novolac Chemical Sealant
From: $152.00- Flexible joint filler - Elongation 43.4% at 70F (ASTM D-412)
- Outstanding chemical and impact resistance
- Novolac epoxy urethane hybrid formula
- Excellent adhesion 420 psi
- 100% solids with 0 voc
- Low odor
- Paintable surface
Newborn 435-XSP Dual Component Cartridge Gun 300ml x 300ml | 300 ml x 150 ml
$120.00- Dual-Component Gun 10.5 oz/300ml Cartridge in 1:1 and 2:1 Ratio 300 ml x 150 ml
- Easily Converts to 300ml x 150ml cartridges
- Quickly Apply Polyurea, Epoxy, Urethane Products
- Easy Application Of Our Twin Cartridge Joint Fillers 3246, 3004, 4034, 830, E5830
- Thrust Ratio 26:1 For Very High Viscosity Materials
- Two-piece stamped steel friction plate
- Heat treated piston rod for increased durability
- Pressure release thumb plate offers easier pressure release
- Horizontal cartridge loading
Newborn 515-SP Vertical Dual Component Applicator Cartridge Gun
$150.00- Use in Vertical Projects
- Quickly Apply Polyurea, Epoxy, Urethane Products
- Easy Application
- Easy thrust using push rod
- Snap in and out disks for quick change outs
- Cutter attachment that cuts spout of caulk tubes
- Vertical cartridge loading
Newborn 535-XSP Professional Dual Component Cartridge Gun 300ml, 150ml, 75ml
$140.00- Dual-Component Gun 10 oz/300ml Cartridge 1:1 ratio
- Multi-Ratio Easily Converts with Snap In/Snap Out Push Disks for 300ml, 150ml 75 ml cartridges
- Quickly Apply Polyurea, Epoxy, Urethane Products
- Easy Application Of Our Twin Cartridge Polyurea's 3246, 3004, 4034, 830
- Thrust Ratio 26:1 For Very High Viscosity Materials
- Extra Durable Teat Treated Piston Rod
- Precision Sintered Friction Plate
- Patented Stabilizing Plate for Extra Cartridge Support
- Easy Release Start Burst Reverse Gripping Plate
- Hammered Finished Alloy Handle With Comfort Grip
Newborn 830A30 Pnuematic Dual Component Cartridge Gun 300ml, 150ml, 75ml
$420.00- Dual-Component Pneumatic Gun 10 oz/300ml Cartridges 1:1 ratio
- 2.5" Cylinder Generates 490 lbs Nominal Thrust @100 psi
- Quick application with smooth, even product flow
- Multi-Ratio Convert to 300ml 150ml 75ml cartridges using snap-in disks
- Quickly Apply Polyurea, Epoxy, Urethane Products
- Easy Application Of Our Twin 10.5 oz/300 ml Cartridge Joint Fillers 3246, 3004, 4034, 830, E5830
- Patented stabilizing plate securely holds cartridges
- Adjustable heavy duty aluminum air regulator
- Air dump valve stops flow instantly
- Reverse air
- Quick disconnect nipple
Newborn 850A30 HD Pnuematic Dual Component Cartridge Gun 300ml, 150ml, 75ml
$690.00- Dual-Component Pneumatic Gun 10.5 oz/300ml Cartridges 1:1 ratio
- Powerful 4" cylinder generates 1,100 lbs nominal thrush @100 psi
- Quick application with smooth, even product flow
- Multi-Ratio Converts to 300ml 150ml 75ml cartridges using snap-in disks
- Quickly Apply Polyurea, Epoxy, Urethane Products
- Easy Application Of Our Twin 10.5 oz/300 ml Cartridge Joint Fillers 3246, 3004, 4034, 830, E5830
- Patented stabilizing plate securely holds cartridges
- Adjustable heavy duty aluminum air regulator
- Air dump valve stops flow instantly
- Reverse air
- Quick disconnect nipple
NP-1 Cove Master Vertical Epoxy Mortar | 100% Solids | High Build | 5 Colors
From: $56.00- Easy construction of vertical cove bases
- 100% Solids Commercial Grade Epoxy
- High build formula
- 5 color options
- Comes as 3 part kit with aggregate or Liquid Only to add your own aggregate or NP1 can also be used as a primer.
NT PerLite Ceramic 50i Heat Reflective Interior Window Film | Rejects 53% Infrared Energy | 50% Visi...
From: $157.50- Lower Summer Cooling Costs with Maximum Reduction Daytime Temperatures and Minimal Darkening
- Rejects 49% of Total Solar Energy
- Glare Reduction 43%
- Blocks 99% of UV Radiation
- Lets 51% of Visible Light Through
- Pleasant Neutral Gray Color
- Easy Application to Interior Side of Window
- Available in 25', 50', 75' & 100' Lengths
- Available in 36",48",60" & 72" Widths (Custom Widths Are Also Available)
NT PerLite Ceramic 70i Heat Reflective Interior Window Film | Rejects 33% Infrared Energy | Excellen...
From: $157.50- Lower Summer Cooling Costs by Reducing Daytime Temperatures and Minimal Darkening
- Rejects 49% of Total Solar Energy
- Glare Reduction 43%
- Blocks 99% of UV Radiation
- Lets 51% of Visible Light Through
- Pleasant Neutral Gray Color
- Easy Application to Interior Side of Window
- Available in 25', 50', 75' & 100' Lengths
- Available in 36",48",60" & 72" Widths (Custom Widths Are Also Available)
OUTDOOR UV STABLE FLAKE Fan Deck Samples | 36 Color Blends | Marketing Tool
$50.00- Great Sales Sample and Selling Tool
- Great Way To Visualize all 36 different Outdoor UV Stable Factory & Hybrid flake color blend combinations
- Quickly Show Customers How You Upgrade Their Outdoor Project with UV Stable Flakes
- Actual Outdoor UV Stable Flake Samples
Outdoor UV Stable Flakes | For Epoxy, Polyaspartic, Urethane Coatings | 36 Colors
From: $3.00- Improves Colors Stability of Flake for use in outdoor spaces
- Contains UV Absorbers to improve UV Stability
- Reduce risk of discoloration due to sun exposure
- 24 Different Outdoor UV Stable Factory Blends to Choose From
- Adds a decorative look to any outdoor epoxy, polyaspartic, polyurea, urethane flooring project
- Random multi-sized flakes create a real stone appearance
- Hide sub-surface imperfections
- Optimal flexibility and strength
- Colorfast, UV stable pigments
SOLD IN 10 LB BOX
P3 Industrial | Waterproofs Concrete | Permanent Salt, Freeze Thaw, Abrasion Protection | Nano-Techn...
$600.00- Permanent Concrete Waterproof and Physical Protection With Only 1 Application Using Colloidal Silica Nano-Technology
- Reduced maintenance and life cycle costs
- Indoors / Outdoors on Horizontal / Vertical Concrete
- Reduces Depth of Penetration of Water Under Pressure 97% EN 12390-8
- Withstands Min 75lbs+ Hydrostatic Vapor Pressure
- Resistance to Concrete Freeze / Thaw damage increased 49% ASTM C666
- Excellent Protection Against Salt Corrosion, Improved 48% ASTM C1556
- Deep Penetration Min 1.5"+ For Exceptional Results
- Improved abrasion resistance 50% ASTM C1803
- Cures New Concrete 14 days then Apply Coatings
- Significantly Improved Stain Resistance
- Apply to wet or damp concrete
- Easy Spray Application
- Zero VOC
- 15 Year Performance Warranty
P3 Marine | Saltwater, Fresh Water & Chloride Concrete Protection | Waterproofs | Permanent Sal...
$700.00- Exceptional Marine Saltwater and Winter Road Salt Chloride Concrete Waterproof Protection
- Great for Marine and Inland Waterway concrete infrastructure, docks, ramps, bridges, roads
- Easy Spray Apply Low Tide and Wet Concrete Horizontal & Vertical
- Increased Concrete Durability and Life with 1x Permanent Application Using Silica Nano-Technology
- Reduces Depth of Penetration of Water Under Pressure 90% EN 12390-8
- Improved resistance to Chloride Penetration For Long Term Durability 26% NT-492 (new alt to ASTM C1202)
- Withstands Min 75lbs+ Hydrostatic Vapor Pressure
- Resistance to Concrete Freeze / Thaw damage increased 48% ASTM C666
- Excellent Protection Against Salt Corrosion, Improved 51% ASTM C1556
- Deep Penetration to 3″+ Protects from Inside Out For Exceptional Results
- Improved abrasion resistance 58% ASTM C1803
- Superior new concrete cure eliminates need for membrane, allows foot traffic 1 to 3 hours
- Zero VOC
- 15 Year Performance Warranty Available
P3 Protect Clear Concrete Sealer | Moisture, Salt, Freeze Thaw, Stain Protection | Fast Easy Applica...
$480.00- Uses Colloidal Silica Nano Technology For Superior Performance With Lifetime Improvement in Durability & Protection
- Great for driveways, parking lots, sidewalks, patios and porches subject to harsh winter and salt conditions
- Outstanding Clear Protection with No Change in Surface Appearance
- Deep Penetration Below the Surface - never wears off
- Protect Concrete From Road Salts and Surface Contamination with 42% improvement ASTM C1556
- Reduce Damage from Freeze / Thaw Cycling with 78%+ improvement ASTM C666
- Strengthen Surface with 40%+ Improvement in Abrasion Resistance ASTM C1803
- Improves Stain Resistance For Easier Stain Removal
- Reduced maintenance and concrete life cycle costs
- Apply to wet or damp concrete no problem
- Fast & Easy One Coat Spray Application - Hand Pump or Airless at 35F and Rising
- Improved Concrete Cure Time on new concrete
- Zero VOC
Paint Sealer & Water Repellent Premium Grade
From: $28.00- Premium Grade Paint Sealer Extends the Life of Exterior Acrylic Painted Surfaces
- Helps Solve Moisture Problems
- Tough, Durable, Clear Finish
- Will Not Yellow
- Up To 3 Year Satisfaction Guarantee
- Eco-Friendly and Easy To Apply
Hot
PaintPlus | Epoxy-Like Toughness | Hard Wearing | Water Based | PerfectPrimer Topcoat | Easy to Use
$190.00- Easier to Apply than Traditional Epoxy Systems
- Cleans Up With Water
- Non-Toxic, Low VOC
- Durable and Flexible
- Chemical Resistant
- Low Odor
- Interior or Exterior Use
- Specified for Use with All PerfectPrimer Products
- Bonds Direct To Metal
Paver Sealer & Water Repellent Premium Grade
From: $30.00- Paver Sealer is a Specialty Premium Grade Water Repellent and Sealer
- Designed to Protect Your Paver Investment From Damage Due to Moisture
- Tough, Durable, Stain Resistant Natural Finish
- To 5 Year Satisfaction Guarantee
- Eco-Friendly and Easy To Apply
Hot
PerfectCleaner Powder Concentrate | Clean Mastic, Epoxy, Concrete, VCT | Remove Grease, Oil, Wax, In...
From: $24.95- Effectively Cleans Surfaces Prior to application of wide variety of primers and other coatings
- Easy to use Powdered Concentrate
- Powerful, 100% water soluble solution fortified with natural citrus extracts
- Non-flammable, biodegradable and deodorizes as it cleans.
- Removes grease, oil, wax, and inks
- Works on metal, plastic, rubber, concrete, tile, wood, vinyl, formica, and many porous surfaces.
Hot
PerfectPaint Floating Floor Prep | Seal-Prime-Paint One Step | Asbestos Tile, Mastic, Glue, Cement |...
$470.00- SEAL - PRIME - PAINT all in one step wide range of dangerous and difficult flooring materials: asbestos, lead, mastics, glue, cements without need for expensive removal
- Great bonding to smooth, non-porous surfaces found in commercial offices and homes including VCT, ceramic tile, vinyl, linoleum
- Safely encapsulate, rather than grind asbestos and lead prior to application of vinyl, tile, wood or other resilient flooring
- Reduce surface prep, expense and project completion time
- No need for scraping, grinding, solvents, soy gels, or removal of mastics
- Molecular adhesion ensures a strong bond to difficult non-porous surface
- Leaves a nice paint finish to your flooring project
- Water based Non-Toxic, no harmful VOCs
- Cleans up with water
Hot
PerfectPrimer Sealer | Encapsulate Asbestos Tiles , Mastics, Glues, Cements | VCT, Vinyl, Linoleum, ...
From: $240.00- SEAL and PRIME dangerous and difficult floor materials: asbestos, lead, mastics, glue, cements without need for expensive removal
- Great bonding primer for smooth, non-porous surfaces: VCT, ceramic tile, vinyl, linoleum
- Safely encapsulate, rather than grind asbestos and lead before applying paint, coatings, or resilient flooring
- Molecular adhesion ensures strong bond to difficult non-porous surfaces
- Reduce surface prep, expense, project completion time
- No need to remove soy strippers, or grinding debris
- Topcoat with most cements, epoxies, paints, anti-static coatings.
- Water based Non-Toxic, (0) VOC's
Phenolic Core Roller Covers 9″ | Case of 12
$67.00- For spreading and leveling mastics, anti-slip floor coatings, and other heavy coatings
- Professional phenolic roller resists water and solvents
- Available in 9" size
- Comes in a case of 12 Roller Covers
Pigment to Color 5500 Polyaspartic | 17 colors
$56.00- Pigment Designed to Color the 5500 Polyaspartic made by ASTC Polymers
- Add a Beautiful Decorative Color to Your 5500 Polyaspartic Project
- 17 Different Colors to Choose From!
- Sold in Quart Containers - Colors 2-3 Gallons When Mixed Into Clear 5500
Plugger 10 Clear Masonry & Wood Acrylic Flat Sealer
From: $46.00- Flat Sheen Acrylic Water Sealer
- Clear, Will Not Yellow
- Protect With Little Change in Appearance
- 3 Year Warranty
- Water Base, Low VOC, Eco-Friendly
- Professional Grade
- Painted & Unpainted Concrete, Masonry, Wood
Plugger 25 Clear Acrylic Flat Sealer | Masonry, Concrete, Wood, Brick, Stucco | Water Repellent
From: $51.00- Flat Sheen Acrylic Water Sealer
- Clear, Will Not Yellow
- Protect With Little Change in Appearance
- 5 Year Warranty
- Water Base, Low VOC, Eco-Friendly
- Professional Grade
- Painted & Unpainted Concrete, Masonry, Wood
Plugger Universal Acrylic Primer | Rust & Corrosion Resistant | For Metal, Concrete, Stucco, Ma...
From: $68.00- Excellent Hide
- Rust Inhibiting and Corrosion Resistant
- Fast Drying
- Interior and Exterior Uses
- Galvanized Metal and Aluminum Applications
- For Metal, Concrete, Stucco, Masonry, Painted Surfaces
- Topcoat with any water or solvent based acrylic, latex or alkyd paints
Polybead Anti-Slip Additive | Least Change Appearance | Easy to Clean & Use | 2 Grit Sizes
$32.00- Adds skid resistance & texture profile to a surface
- Least Change in Surface Appearance & Easiest to Clean
- Use with Epoxy, Polyaspartic, Urethane, Polyurethane and most coatings
- Very small amounts required
- Lightweight aggregate, blends well into coating
- Does not have to be surface broadcast over coating
- Does not change physical properties of the coating
- Reduces surface dirt accumulation for easy cleaning
- Appearance better than sand
- Can be used on decorative floors using chips
- Excellent in marine environments
- High hydrolitic stability
Polyurea Basecoat for Concrete Floors | Low Temp 20°F | 100% Solids
From: $225.00- Low VOC Formulation
- low Odor
- Minimal Downtime
- Fast Dry Time
- Warm Temp Workability & Cure
- Superior Impact Resistance
- Superior Tensile & Tear Strength
- Excellent Elongation
- Strong Adhesion
- Broadcast Compatible
Polyurethane HD IsoFree Aliphatic 2K Floor Coating | High Gloss Satin Matte Flat | Low Temp 40 °F | ...
From: $68.00- UV Resistant Will Not Yellow
- Zero VOC- SCAQMD Compliant
- Choice of High Gloss, Satin, Matte or Super Matte (nearly flat) Finish
- Clear & White Color
- Excellent Adhesion
- Outstanding Chemical Resistance
- MEK Double rub @50% solids Passed 2,000 Cycles Test
- For Concrete, Brick, Wood, Metal, Tile (glazed & unglazed)
Pro 7″ Fence & Deck Stain Brush | Use with EXPERT Stain Products
$80.00- Professional-level results effortlessly achieved
- Save time and effort on staining projects
- Versatility for various staining needs
- Comfortable grip for extended use
- Hassle-free cleanup
- Compatible with oil-based and water-based paints
- Built to last with premium materials
- Best used with our EXPERT line of stains
Pro Starter Pack | All Surface Graffiti Removal System | Biodegradable
$500.00- All in one solution for effective Graffiti Removal
- Save Money with this Bundle
- Ideal for cities, schools, facilities, grounds maintenance, DIY property owners and contractors
- Training materials included
- Highly effective biodegradable professional grade graffiti remover
- Great for porous concrete, brick, stone, wood as well as removing graffiti from tough split faced block, cinder block and exposed aggregate surfaces
- Safe and effective for use on all types of natural stone (such as limestone, granite, and marble), stainless steel, trees, plastics, and playground equipment
- Virtually odorless and non toxic.
- Easily rinsed with a small pressure washer requiring very little rinsing water. (Any resultant run off is a readily biodegradable gray water soap which can be left to biodegrade, recycled or further diluted for use in gardens etc.)
- No shadows, no damage, no harsh scrubbing required.
- Safe and effective for removals on asphalt roads
ProGrout (formerly 4034) Polyurea Concrete Quick Repair | Ultra Low Viscosity | Apply Low Temp -20°F...
From: $180.00- Back-in-service as fast as 30 min with heavy forklift loads
- Meets OSHA fork lift operator floor facility safety, surface conditions
- Save Bearings & Wheels On Electric Pallet Jacks and Electric Lifts.
- Meets USDA requirements
- Cold applications down to -20°F (-26°C)
- Nano-locks, penetrates deep into small concrete cracks with very low viscosity
- Fuel resistant
- Increase productivity by providing smooth operating surface any temp
- Reduces facility “down-time” & maintenance man hours
- Mix with sand for additional strength for larger crack and holes repairs
- High tensile strength & durability (as strong or stronger than surrounding concrete)
- Very low voc <5 g/L and Low odor
Quartz Color Granule Blends for Epoxy, Polyaspartic Floor Coatings | 47 Color Blends
From: $3.00- Wide Selection of 47 pre-mixed color blends
- Create-A-Blend - create your own unique blend from 43 solid colors
- Natural looking Decorative Appearance
- Use Outdoors - Superior colorfastness / UV stability
- Extreme abrasion resistance
- Excellent chemical resistance
- Great for high traffic, heavy-duty environments
- Outstanding slip-resistance qualities
- Extraordinary resilience
- Use outdoors with recommended non-yellowing polyaspartic topcoat
- Grain Size 40-S Broadcast Grade (40 mesh, spherical)
- Grade Size 25-A Trowel Grade (25 mesh, angular)
- USE OUR COLOR VISUALIZER TO SEE WHAT YOUR QUARTZ GRANULES WILL LOOK LIKE
HOLIDAY SHIPPING SURCHARGES MAY APPLY WEST OF MISSISSIPPISOLD IN 50 LB BAGS
Quartz Granule Fan Deck Samples | 25 Factory Blended Colors | Marketing Tool
$40.00- Great Sales Sample and Selling Tool
- Great Way To Visualize 25 different quartz granule color blend combinations
- Quickly Show Customers How You Can Make Their Floor Look Great using Quartz Granules
- Actual Quartz Granule Grade 40-S Samples
Quartz Granule Sample Kit With Real Granules | 40 Solid Colors | Grade Size 40-S & 25-A Example...
$65.00- Great Sales Sample and Selling Tool
- Actual Loose samples of all 40 solid colors available
- Samples of both size granule options, Grade 40-S and Grade 25-A
- Great way to help create and visualize your own unique custom quartz blend
- Quickly Show Customers How You Can Make Their Floor Look Great using decorative Quartz Granules
Quartz Granules Color Samples (1 or 3 Pack)
From: $3.00- Real Quartz Granules- Same material used in our full-size blends
- Accurately evaluate color, size and texture before ordering bulk
- Ideal for epoxy and polyaspartic coating projects
- Compare coloring in your actual lighting
- Contractor & DIY friendly
- To order, simple select how many samples you want in drop down and in the notes at checkout input what color and size quartz you are looking for! Note: if selecting a custom blend please include % of each solid color (total 100%).
R Silver 20i Heat Reflective Window Film | Rejects 79% Infrared Energy | 18% Visible Light Transmiss...
From: $126.00- Maximum Reduction of Daytime Temperatures
- Excellent Solar Energy Rejection of 78%
- Blocks 99% of UV Radiation
- Lets 18% of Visible Light Through
- 80% Glare Reduction
- Easy Application to Interior Side of Window
- Available in 25', 50', 75' & 100' Lengths
- Available in 36",48",60" & 72" Widths (Custom Widths Are Also Available)
R Silver 20X Exterior Heat Reflective Window Film | Rejects 81% Infrared Energy | 17% Visible Light ...
From: $225.75- Maximum Reduction of Daytime Temperatures
- Excellent Solar Energy Rejection of 78%
- Blocks 99% of UV Radiation
- Lets 18% of Visible Light Through
- 80% Glare Reduction
- Easy Application to Exterior Side of Window
- Available in 25', 50', 75' & 100' Lengths
- Available in 36",48",60" & 72" Widths (Custom Widths Are Also Available)
Random Cut Glitter Flakes for Epoxy, Polyaspartic, Urethane Coatings
$34.00- Adds Bright Diamond Like Sparkle Appearance to Floor
- Mix with Any Flake Blend Before Broadcasting into Floor
- Easy to use with typical mix ratio 3% to 5% Random Cut Glitter
- 12 Beautiful Colors to Choose
- Provides a delicate and radiant shimmer that brings timeless elegance to every detail
- Adds metallic accents and dimension to your project
Quantity Discounts AvailableSOLD BY THE LB
Random Cut Glitter Flakes Sample Kit With Actual Flakes | All 12 Color Options
$35.00- Great Sales Sample and Selling Tool
- Actual Loose samples of all 12 colors available
- Great way to help create and visualize your own unique custom blend
- Quickly Show Customers How You Can Make Their Floor Look Great using decorative Random Cut Glitter Flakes
Reflective Colored Glitter Powder for Epoxy, Polyaspartic, Urethane Coatings | 12 Colors
From: $38.00- Adds a Bright Colorful Sparkle Appearance to the Floor
- Highly Reflective When It Picks Up Light
- 12 Colors to Choose From
- Easy to Mix 0.008” Powder into Topcoat
- Can be mixed into any liquid coating
- Use on both floor and wall projects
Reflective Glitter Powder Sample Kit With Actual Glitter | All 12 Color Options
$35.00- Great Sales Sample and Selling Tool
- Actual Loose samples of all 12 colors available
- Great way to help create and visualize your own unique custom blend
- Quickly Show Customers How You Can Make Their Floor Look Great using decorative Reflective Glitter Powder
Restore-N-Prep | Efflorescence, Mineral & Stain Remover | Cleans and Dissolves | Walls & F...
From: $36.00- Great for Cleaning Efflorescence, Minerals and Stains on both Walls & Floors
- Important Preparation Step Before Applying Paint, Decorative Floor Coating and Clear Sealers
- Simply spray on and rinse off, no scrubbing needed
- Cleans wide range of concrete, masonry, stone, tile
- Does not require respirators.
- Won't etch or damage glass & anodized window frames
- Reduces water introduction that prevents more efflorescence
Rubber-Lok Liquid Synthetic Rubber | Ultra Flexible 1000% Elongation | Stops Leaks | Paintable | UV ...
From: $83.00- Ultra Flexible 1000% Elongation
- Waterproof Membrane
- Great Repair & Coating for Roofs, Decks, Foundation walls, Gutters, Planter boxes
- Rust & Corrosion Control
- UV Resistant
- Paintable after application
- Stops Leaks
- Water Based, Low VOC & Low Odor
Rust & Mineral Stain Remover Concentrate | Battery Acid, Water, Fertilizer, Mud Stains | Porous...
From: $70.00- Easily Remove the Heaviest Rust & Mineral Stains
- Remove Stubborn Oxidized Paint Stains from Brick & Masonry
- Brightens and Restores Without Etching Concrete
- Odorless and Easily Diluted as Needed
- 100% Readily Biodegradable
- Much Safer Than Muriatic Acid Alternative
S16 Epoxy Coating | Metals | Immersion Service
From: $88.00- Protective Coating for Metals
- Immersion Service
- Approved in Testing for use with Potable Water
- USDA for Incidental Food Contact
Salt Guard Road Salt & Ice Damage Premium Grade Concrete Protection
From: $56.00- Premium Grade Winter Salt and Ice Guard With Durable Icephobic Protection
- Winter Freeze Thaw and Ice Protection
- Clear Finish, Will Not Yellow
- Prevents Water & Ice Intrusion
- Eco-Friendly and Easy To Apply
- For All Porous Concrete, Masonry, Wood
Satin-Lok Wet Look High Gloss Acrylic Sealer | Concrete, Masonry, Wood, Brick | UV Resistant
From: $61.00- High Gloss Wet Look Acrylic Water Sealer
- UV Resistant Will Not Yellow
- 5 Year Warranty
- Water Base, Low VOC, Eco-Friendly
- Professional Grade
- Painted & Unpainted Concrete, Masonry, Wood
- Horizontal & Vertical Surfaces
- Indoor & Outdoor Projects
ScrubWorx 20.20 ESD Floor Cleaner Concentrate
$225.00- Rejuvenate and Improve Static Dissipative Properties of any Dissipative Floor Finish
- Micro-Clean & Conditions
- Cleans floors Treated with Staticworx CoatZF Floor Finish
- Designed For Maintenance programs to Reduce static electricity buildup
- Increase Conductivity of Surfaces Where Sensitive Electronic Components in-use or manufactured
- Cost effective concentrate formula
- Effective on vinyl, vinyl-asbestos, rubber, linoleum, ceramic and concrete surfaces
Sensitive Smooth Surface Graffiti Remover | Wipe On then Wipe Off Easy Removal | Biodegradable
From: $39.00- Versatile multi use product for removing graffiti and other marks from paintwork.
- Fast acting penetrating formula encapsulates and suspends graffiti and other marks so you can wipe away easily without smearing / smudging or re-depositing into coated surface.
- Brush on / wipe off or spray and agitate with soft bristled brush or scourer.
- Pleasant smelling and non toxic.
- Safe and effective to use on most smooth surfaces.
- Biodegradable
- Cleans and disinfects (kills) staphylococcus, streptococcus, E. coli and salmonella
Shingle-Lok Asphalt Shingle Coating Sealer| Weather Protection | Resists Cracking & Chipping | ...
From: $375.00- Penetrates and excellent adhesives qualities to minimize granule loss
- Easy to apply with airless roller or brush
- Water-based for easy clean up
- Low Odor
- Changes the color without looking painted
- Available in 8 Color Options including Clear
- Satin Finish
- 7 Color Options
Silica Sand Anti-Slip Additive For Epoxy, Polyaspartic, Polyurethane, Urethane Floor Coatings | 5 Si...
From: $29.95- Adds very tough skid resistance & texture profile to a surface
- Works well with high performance 2 part floor coatings
- Does not change physical properties of the coating
- Well bonded into the body of the coating
- Comes in 5 mesh sizes
Quantity Discounts AvailableSOLD IN 4 lb, 44 lb & 50 lb BAGS
Sipernat 22 LS Silica Thickening Agent For Epoxy Concrete Crack and Joint Repair | 20 lbs | Evonik
$199.00- Great thickening agent for use with wide range of epoxy, polyurethane and other coatings
- Allows coatings to be used as great concrete crack, hole, spall and control joint repair for larger projects
- When mixed into fast acting products, makes for very quick repairs
- Many other industrial uses
- Comes in 20 lb bags
****TRUCK FREIGHT SHIPPING ONLY - MIN ORDER 5 BAGS****
Skate Park Pack | Graffiti Removal System | Biodegradable
$650.00- All in one solution for effective Graffiti Removal
- Save Money with this Bundle
- Ideal for cities, schools, facilities, grounds maintenance, DIY property owners and contractors
- Training materials included
- Highly effective biodegradable professional grade graffiti remover
- Great for porous concrete, brick, stone, wood as well as removing graffiti from tough split faced block, cinder block and exposed aggregate surfaces
- Safe and effective for use on all types of natural stone (such as limestone, granite, and marble), stainless steel, trees, plastics, and playground equipment
- Virtually odorless and non toxic.
- Easily rinsed with a small pressure washer requiring very little rinsing water. (Any resultant run off is a readily biodegradable gray water soap which can be left to biodegrade, recycled or further diluted for use in gardens etc.)
- No shadows, no damage, no harsh scrubbing required.
- Safe and effective for removals on asphalt roads
Skyway Bird Film | Reduce Bird Strikes | Optically Clear | UV Protection | Scratch Resistant
From: $945.00- Cost-effective, retrofit solution to effectively reduce bird strikes
- Recommended by the American Bird Conservancy as a 'Product that reduces bird collisions'
- Material Threat Factor of 15
- Compliant with North America Bird0safety building codes and guidelines such as:
- GSA 3.6.7 BIRD-SAFE BUILDING DESIGN (us)
- CSA A460:19 Bird Friendly Design Standard (Canada)
- LEED Innovation Credit v4.1 Bird Collision Deterence
- Adheres to emerging state and municipality bird-safety legislation
- Film does not distract from interior viewing or alter building aesthetics
- Pressure-sensitive adhesive creates exceptional ease of installation
- To save you time cutting film, custom widths cut to order are available. To do so, simply order the next largest width listed (ex: you need a width of 32″, then order 36″ and you will receive a roll cut to 32″ wide and a 2nd piece 4″ wide).
SLR-20 Epoxy & Urethane Hybrid | High Elongation | Elastomeric | Impact & Tear Resistant
From: $260.00- High elongation and elastomeric
- High Resilience
- Tear Resistant
- Impact Resistant Flooring/ Coating
Solvent For Use With Epoxy | Urethane | Polyurethane Coatings to Thin, Reduce Clean-Up
From: $65.00- Solvent For Use With Epoxy | Urethane | Polyurethane | Polyaspartic Coatings
- Use to Thin, Reduce and Clean-Up
SP Blue 75x Spectrally Selective Exterior Window Film | Rejects 88% Infrared Energy | 76% Visible Li...
From: $630.00- Lower Cooling Costs with Maximum Reduction of Daytime Temperatures
- Filters 88% of heat-building IR radiation
- Keeps building comfortable without blocking welcome daylight
- Blocks 99% of UV Radiation
- Subtle Blue Tint
- Easy Application to Exterior Side of Window
- Available in 25', 50', 75' & 100' Lengths
- Custom Widths Available
Spike Shoes – Flexible | Walk on Wet Epoxy, Polyaspartic, Urethane Floor Coatings
$175.00- Deluxe Polypropylene spiked shoes
- Flexible for easier walking
- Allows you walk on wet surface without damage to floor coating
- 3/4" inch spikes
- Quick Release Snap-Buckle Strap
- Round Tip for snug fit
- They are a must when installing epoxy, polyaspartic and urethane flooring systems
- Sold by the pair
- Comes in 3 shoe sizes
Spike Shoes | Economical | Walk on Wet Epoxy, Polyaspartic, Urethane Floor Coatings
$34.99- A must for installing epoxy and polyaspartic floors
- Walk on wet surface without damage to floor coating
- 3/4" spikes are firmly attached to a flexible plastic sole with nylon straps (user needs to install the 11 spikes to the shoe platform prior to use)
- Use with Street Shoes or steel toe safety shoes
- Easy to adjust straps at toe and ankle
- Sold by the pair
- One size fits all
Spike Shoes | Walk on Wet Epoxy, Polyaspartic, Urethane Floor Coatings
$45.99- Polypropylene spiked shoes
- Allows you walk on wet surface without damage to floor coating
- 3/4" inch spikes come with a Quick-release snap-buckle strap system
- They are a must when installing epoxy, polyaspartic flooring systems
- Sold by the pair
- One size fits all
Spiked Roller Cover Metal (Porcupine) 9″ and 18″ Release Trapped Gas Bubbles
From: $195.00- Sturdy metal construction
- 13/16" Long Metal spikes
- Available in both 9" and 18" sizes (does not include handle)
- Helps remove gas bubbles that can form in floor coatings for a variety of reasons
Spiked Roller Cover Plastic (Porcupine) 9″ and 18″ Release Trapped Gas Bubbles
From: $115.00- Sturdy plastic construction
- Long 13/16" plastic spikes
- Available in both 9" and 18" sizes (does not include handle)
- Helps remove gas bubbles that can form in floor coatings for a variety of reasons
Spraythane FL Epoxy & Urethane Topcoat | Immersion Service | 100% Solids
From: $100.00- Tough and Flexible Resilience
- Immersion Service
- High Tear Resistant
- High Impact Resistant
- Combat Cavitation and Abrasion
- Improved water & Chemical Resistance
- Eliminates moisture sensitivity & toxicity compared to traditional urethane
Static Mixer For E5830 Joint Filler Dual Cartridge Concrete Repair Kit
$30.00- Replacement Mixer for E5830 Joint Sealant 300ml x 300ml cartridge kit
- Allows multiple applications from single cartridge kit
- Mixes product in correct ratio and ready to apply
- Adjust Product Flow With Simple Cutting of Nozzle End
Static Mixer Used With 21 oz Dual Cartridge Concrete Repair & Joint Filler Kits
$25.00- Replacement Mixers for ASTC Polymers' 21 oz cartridge kits
- Allows multiple applications from single cartridge kit
- Mixes product in correct ratio and ready to apply
- Select static mixer for your specific cartridge kit
- For use with dual cartridge kits 800, 830, 3003, 3004, 3246, 4034
Staticide General Purpose | Static Control for All Surfaces
From: $80.00- Formulated for non-porous surfaces
- Works with our selection of Anti-Static Mats
- Exceeds MIL-B-81705 and NFPA-56A electrostatic decay criteria
- Meets requirements for topical anti-stats as listed in DOD-HDBK-263
- Proven effective in relative humidity below 15%
- Decays static in less than 2 seconds
- Surface resistance between 10e9 - 10e10 ohms
- One gallon covers approximately 2000 sq ft
- Lasts from weeks to months depending on application
Stone Sealer & Water Repellent Premium Grade
From: $70.00- Stone Sealer is a Specialty Premium Grade Water Repellent and Sealer Designed For Stone
- Prevents Damage From Wind Driven Rain
- Tough, Durable, Stain Resistant Natural Finish
- To 5 Year Satisfaction Guarantee
- Eco-Friendly and Easy To Apply
Stucco Sealer & Water Repellent Premium Grade Stucco Protection
From: $37.00- Stucco Sealer is a Specialty Premium Grade Water Repellent and Sealer Designed for Stucco
- Prevents Damage From Wind Driven Rain
- Tough, Durable, Stain Resistant Natural Finish
- To 5 Year Satisfaction Guarantee
- Eco-Friendly and Easy To Apply
Super Stucco Silane Siloxane Sealer Concentrate Protects 98 mph Wind Driven Rain
$179.00- Silane Siloxane Sealer and Primer For Stucco, Plaster and EIFS Walls
- Clear, Will Not Yellow, No Change in Appearance
- Protects From Wind Driven Rain
- Water Base, Low VOC, Eco-Friendly
- 5 Year Warranty
SX-20005-5 Polyethylene Tank 6.5 Gallons for US SAWS Polyurea Joint Filler Pumps
$107.00- Oversize 6.5 Gallon Tanks
- Sturdy Polyethylene Construction
- See Through Design For Quick Visual of Fluid Levels
- For Use with US SAWS One Man and Two Man Pumps
SX-20005-6 Polyethylene Tank Cover 6.5 Gallon for US SAWS Polyurea Joint Filler Pumps
$43.00- Protect and Secure Polyurea & Epoxy in 6.5 Gallon Polyethylene Tanks
- For Use with US SAWS One Man and Two Man Pumps
SX-20017 Tank Warmers For Cold Weather for US SAWS Polyurea Joint Filler Pumps
$256.00- Good for cold weather projects
- Protects Polyurea from cold temperatures
- One Warmer for Each Tank
- For Use with US SAWS One Man and Two Man Pumps
SX-20111 Static Mixer Retaining Nut (5) & Manifold Thread (1) US SAWS Polyurea Joint Filler Pum...
$88.00- Comes with 5 Retaining Nuts To Secure Static Mixer in Place
- 1 Manifold Thread
- For Use with US SAWS One Man and Two Man Pumps
SX-20111 Static Mixer Retaining Nut & Cap for US SAWS Polyurea Joint Filler Pumps
$36.00- Retaining Nut Secures Static Mixer in Place
- Static Mixer Cap protects End from Contamination during brief stopping periods
- For Use with US SAWS One Man and Two Man Pumps
SX-20116 Manifold With Grease Fittings for US SAWS Polyurea Joint Filler Pumps
$209.00- Replacement Manifold for US SAWS Dual Component Pumps
- Complete with fittings, new retainer nut and a night cap
- For Use with US SAWS One Man and Two Man Pumps
SX-20201 Replacement Pump for US SAWS Polyurea Joint Filler Pumps
$506.00- Replacement Pump For US SAWS One Man and Two Man Pumps
SX-21000 Polyurea Pump 2:1 Ratio Conversion Kit for US SAWS Polyurea Joint Filler Pumps
$165.00- Quickly Convert Dual Component Pump to 2:1 Mix Ratio Products
- For Use with US SAWS One Man and Two Man Pumps
SX-21023 Power Inverter 1200W for US SAWS Polyurea Joint Filler Pumps
$404.00- Allows Cordless Operation When Stable Power Source Unavailable
- Easy Operation in the Field
- Works with Group 27 or larger DEEP CYCLE Marine or RV battery
- For Use with US SAWS One Man and Two Man Pumps
SX20100 US SAWS Dual Component 2 Man Polyurea / Epoxy Joint Filler Pump
From: $6,750.00- Reduce Labor Cost With Significantly Increased Speed
- Reduce Material Waste With Better Control of Flow
- Allows Quick Joint Filling vs Cartridge Application
- Production rates to 5,000 lineal joint filling feet per day (new concrete)
- Works With Both Polyurea and Epoxy 2 Component Joint Fillers to 5,000 cps viscosity
- Easy to Use – Inexpensive to Maintain
- Twin 6.5 Gal Tanks Each Hold 5 Gal Joint Filler
- Semi-Transparent Tanks To Monitor Liquid Level
- Easy To Clean Polyethylene Tanks
- Dispense 1:1 Ratio or 2:1 Ratio Product
- 1/2HP 110V Electric Motor, 0-6 GPM Flow Control
- 220V optional 1/2 HP Electric Motor Available Special Order Lead Time for use outside North America
- Cordless Use With Optional Deep Cycle Battery & Power Invertor
PRICE INCLUDES LTL SHIPPING TO COMMERCIAL ADDRESS
SX20410 Polymer Pump Line For US SAWS Polyurea Joint Filler Pumps
$165.00- Replacement Line for Polyurea Pumps
- For Use with US SAWS One Man and Two Man Pumps
SX20550 US SAWS Dual Component 1 Man Polyurea / Epoxy Joint Filler Pump
From: $7,200.00- Reduce Labor Cost - redesigned low profile 1 man use
- Significantly Increased application Speed
- Reduce Material Waste With Better Control of Flow
- Allows Quick Joint Filling vs Cartridge Application
- Works With Polyurea and Epoxy 2 Part Joint Fillers
- Easy to Use – Inexpensive to Maintain
- Twin 6.5 Gal Tanks Each Hold 5 Gal Joint Filler
- Semi-Transparent Tanks To Monitor Liquid Level
- Easy To Clean Polyethylene Tanks
- Dispense 1:1 Ratio or 2:1 Ratio Product
- 1/2HP 110V Electric Motor, 0-6 GPM Flow Control
- 220V optional 1/2 HP Electric Motor Available Special Order Lead Time for use outside North America
- Cordless Use With Optional Deep Cycle Battery & Power Invertor
PRICE INCLUDES LTL SHIPPING TO COMMERCIAL ADDRESS
Synthetic Shellac Primer Epoxy Fortified | Stain Odor & Tannin Blocker | Anti-Microbial | Wood,...
From: $26.00- Stops Tanin Bleed
- Stain Blocker
- Easy To Apply
- Blocks Smoke and Water Damage
- Resists Microbial Growth
Tec-Top Elastomeric Waterproofer | Flexible 200% Elongation | 100% Acrylic | Concrete Brick Wood Me...
$325.00- Great for use on Brick, Stucco, Cement, Concrete, Wood, Metal and EIFS
- Protects both Exterior Vertical Walls and Horizontal surfaces
- Flexible Coating That Bridges small cracks
- Low VOC < 2g/L and Low Odor
- High UV Resistance
- Option for Custom Colors
- Low Temperature Flex, Passed 180° bend @ 0°F
- Tensile Strength, 260 PSI
- Flexible 200% Elongation
Tec-Top Textured Elastomeric Coating | Flexible 215% Elongation |100% Acrylic | Concrete Stucco Maso...
- Great looking high build textured coating
- Textured surface looks good and hides surface imperfections and bridges small cracks
- Excellent Hide with medium texture
- Flexible 215% elongation bridges cracks
- Fast Drying
- Interior and Exterior Uses
- Comes in a Ready-to-Use White that can be tinted to most pastel colors
Terrazzinite Decorative Epoxy | Granite Like Appearance | High Build to 3/8″ While Self Leveli...
From: $300.00- Stunning Granite-like Appearance
- Smooth Finish and Sleek Design
- Incredibly Easy to Use
- Quicker, Easier and Cheaper than Terrazzo & Granite
- Self-Leveling
- UV Resistant
- High Build to 3/8" – 100% Solids Commercial Epoxy
- Good Adhesion 350 psi
- Good Chemical Resistance
Terrazzo Stone Flakes | Multi-Sized | For Epoxy, Polyaspartic, Urethane Coatings | 20 Colors
From: $3.00- Decorative Terrazzo Stone Look
- 20 Different Color Blends to Choose
- Adds a decorative look to any epoxy, polyaspartic, polyurea, urethane flooring project
- Random multi-sized flakes create a real stone appearance
- Hide sub-surface imperfections
- Optimal flexibility and strength
- Colorfast, UV stable pigments
- Low sound / noise deadening qualities
SOLD IN 10 LB BOX
Terrazzo, Hybrid & Mica Enhanced Stone Flake Fan Deck Samples |Popular Factory Blended Colors |...
$47.00- Great Sales Sample and Selling Tool
- Great Way To Visualize Terrazzo, Hybrid Stone and Mica Enhanced Flake color blend combinations
- Quickly Show Customers How You Can Make Their Floor Look Like Natural Stone using decorative Terrazzo & Hybrid Stone Flakes
- Actual Terrazzo ,Hybrid Stone and Mica Enhanced Flake Samples
Tinted Waterproofer Transparent Stain and Water Repellent | Wood | Concrete
$48.00- Combines Superior Water Repellent Protection With 4 Transparent Stain Colors in 1 Easy Step
- Penetrating Silane Siloxane Formula With No Change in Surface Texture
- Protects Unpainted Concrete, Masonry and Wood
- Opaque Transparent Look
- Eco-Friendly
Tower-Gard E568 Anticorrosive Coating for Steel and Galvanizing
From: $120.00- Anticorrosive Coating: For structural steel and galvanized surfaces in atmospheric service. Tower-Gard E568 is uniquely tolerant of compromised surfaces. Tower-Gard E568 can be applied over all types of tightly adherent existing coatings as well as to bare steel or galvanizing.
- Displace water from wet surfaces
- Use in Underwater
- Low Toxicity
- Ships Non-Hazardous
Traffic-Lok 100% Acrylic Traffic and Line Marking Paint | Premium Waterborne | Concrete Masonry Asph...
From: $44.00- Flexible and Durable- Will Not Crack
- Easy to Apply
- Great for concrete, asphalt, galvanized metal, aluminum and previously painted surfaces
- Environmentally Safe
- Requires No Thinning-Pre-Stained
- Safe for Interior and Exterior Applications
- 6 color options
Transgel Paint & Graffiti Remover For Toughest Tags | Long Overnight Dwell Time | Low Temp 20F
From: $38.00- Fast acting and non-damaging
- Works on all building surfaces, from porous cinderblock to smooth paintwork, powdercoat and asphalt.
- Virtually odorless and non toxic.
- Thick Gel consistency stays wetter longer for maximum dwell time to soften thicker/older paint for subsequent rinsing
Universal Acrylic Metal Primer Pro-Cryl Paint
- Rust-inhibitive for steel, aluminum, galvanized steel
- Excellent corrosion-resistant primer
- Use with all acrylic, alkyd, urethane, epoxy topcoats – both solvent & water base
- Early moisture resistant
- Quick dry to recoat time for faster project turnaround
- Low temperature application down to 40F
- Use as bonding primer with Cool Coat Thermal Barrier Paint
- Available in red-oxide, gray and off-white
- Acceptable for use in USDA-inspected facilities
- Low VOC, water base, complies with SCAQMD & CARB
Universal Pigment Color for Polyaspartic, Epoxy & Urethane Coatings
From: $45.00- Pigment Designed to Color E344QC, E444X, E449 and E450SF Polyaspartic Coating
- Add a Beautiful Decorative Color to Your Polyaspartic Project
- 13 Different Colors to Choose From!
- Easy mixing using a Jiffy style mixer
UW601 Underwater Concrete Crack Filler Epoxy Paste Repair
$350.00- Make Repairs Underwater or on Wet Surfaces
- Concrete and Masonry
- Both Horizontal & Vertical Repairs
- Good for Cracks up to 1/8" and Thin Build Repairs
- Apply 35F - 90F
- 100% solids with 0 voc
- Low odor
UW602 Underwater Pourable Concrete Crack Filler Epoxy Repair
$325.00- Make Repairs Underwater or on Wet Surfaces
- Concrete, Cement and Masonry
- Both Horizontal & Vertical Repairs
- Good for Larger Cracks and Wide Variety of Repairs
- Easy to Use Pourable Formula
- 100% solids with 0 voc
- Low odor
VandlClean Super Graffiti Remover Spray | Biodegradeable
From: $47.00- Effective All-Purpose Graffiti Remover
- Professional Grade
- Designed for use with Rainguard's VandlGuard line of Non-Sacrificial Anti-Graffiti Coatings
- Water Base, Low VOC, Eco-Friendly
- Biodegreadable
- Removes Graffiti From Wide Variety of Surfaces
- Pump Spray or Gallon Container
VandlGuard Finish Coat Premium Anti-Graffiti Coating
From: $150.00- Top Coat for VandlGuardFIVE and VandlGuardTEN Anti-Graffiti Coatings
- Allows Multiple Tag Removals
- Low Gloss for Little Change in Appearance
- UV Resistant Will Not Yellow
- Water Base, Low VOC, Eco-Friendly
- Specified by Architects in 099623
VandlGuard IsoFree Urethane Non-Sacrificial Anti-Graffiti Painted Wall & Mural | Low Temp 40°F ...
From: $81.00- "Best in Class" Graffiti Protection for the Toughest - Most Important Projects
- Warranted to sustain repeated graffiti removals up to 15 years and 165 graffiti removals
- Save 50% to 66% in labor application costs with 1 coat protection vs other 10 yr products
- Easy to Clean Graffiti Removal with low cost commercially available solvents
- 160+ graffiti cleaning cycles without damage
- UV Resistant Will Not Yellow
- Zero VOC- SCAQMD Compliant
- Choice of High Gloss, Satin or Matte Finish
- Clear & White Color
- Excellent Adhesion
- Outstanding Chemical Resistance
- Concrete, Brick, Wood, Metal, Plastic, Vinyl
VandlGuard Non-Sacrificial Anti-Graffiti Coating | Low Gloss and Zero Gloss Options
From: $69.00- Non-Sacrificial Coating Allows Multiple Tag Removals
- Low Gloss & Zero Gloss options for Little or No Change in Appearance
- UV Resistant Will Not Yellow
- Unpainted / Painted Surfaces
- Water Base, Low VOC, Eco-Friendly
- Specified by Architects in 099623
- READY-TO-USE OR CONCENTRATE
VandlGuard Silicone Elastomeric Anti-Graffiti & Water Repellent Coating | Flexible 420% Elongat...
From: $135.00- Great Anti-Graffiti Protection and Water Repellent in one Product
- Non-Sacrificial Anti-Graffiti Performance Against Multiple Tags
- Excellent Protection Against Wind Driven Rain
- Protects Concrete, Brick, Metal, Stone, EIFS, Wood, Tile and Painted Surfaces
- Inhibits growth of mildew, mildew, fungus, bacteria
- Exceptional flexibility and crack bridging with 420% elongation
- UV Protectant
- Horizontal and Vertical applications
- No expensive sand blasting/diamond grinding needed
- Exceptional adhesions to most substrates
- Ready-to-Use - no mixing needed
- Low VOC - less than 20 g/L
- Comes Clear, White and 3 Tint Bases for Custom Colors
- Paint Over it with 100% acrylic paints
VandlGuard Single Part Urethane Anti-Graffiti Wall & Mural Protect 10 Yr | Low Temp 40°F
From: $215.00- Premium Non-Sacrificial Anti-Graffiti Coating
- ASTM D7089-06/D6578 for Easy Level 9 Cleaning!
- Warranted to sustain repeated graffiti removals to 10 years with and up to 50 graffiti removals
- Matte Finish, Satin or High Gloss Option
- UV Resistant Will Not Yellow
- Good Chemical Protection
- Excellent Adhesion
- Unpainted / Painted Surfaces
- Water Base, Low VOC, Eco-Friendly
- Concrete, Block, Brick, Wood, Painted Metal, Vinyl
VandlGuard Two Part Urethane Anti-Graffiti Wall & Mural Protect 10 Yr | Low Temp 40°F
From: $228.00- Super Premium Non-Sacrificial Anti-Graffiti Coating
- ASTM D7089-06/D6578 for Easy Level 9 Cleaning!
- Warranted to sustain repeated graffiti removals to 10 years and 60 graffiti removals!
- Quick cure graffiti removal only 24 hrs after applied
- Matte Finish, Satin or High Gloss Option
- UV Resistant Will Not Yellow
- Excellent Chemical Protection
- Excellent Adhesion
- Unpainted / Painted Surfaces
- Water Base, Low VOC, Eco-Friendly
- Concrete, Block, Brick, Wood, Painted Metal, Vinyl
VandlGuardFIVE Premium Non-Sacrificial Anti-Graffiti Coating 5 Yr
From: $107.00- Premium Non-Sacrificial Anti-Graffiti Coating Allows Multiple Tag Removals
- Low Gloss for Little Change in Appearance
- UV Resistant Will Not Yellow
- Unpainted / Painted Surfaces
- Water Base, Low VOC, Eco-Friendly
- 5 Year Labor & Material Warranty
- Specified by Architects in 099623
VandlGuardONE Premium Non-Sacrificial Anti-Graffiti Coating 1 Yr
From: $79.00- Premium Non-Sacrificial Anti-Graffiti Coating Allows Multiple Tag Removals
- Low Gloss for Little Change in Appearance
- UV Resistant Will Not Yellow
- Unpainted / Painted Surfaces
- Water Base, Low VOC, Eco-Friendly
- 1 Year Labor & Material Warranty
- Specified by Architects in 099623
VandlGuardTEN Premium Non-Sacrificial Anti-Graffiti Coating 10 Yr
From: $149.00- Premium Non-Sacrificial Anti-Graffiti Coating Allows Multiple Tag Removals
- Low Gloss for Little Change in Appearance
- UV Resistant Will Not Yellow
- Unpainted / Painted Surfaces
- Water Base, Low VOC, Eco-Friendly
- 10 Year Labor & Material Warranty
- Specified by Architects in 099623
VandlTop Sacrificial Anti-Graffiti Coating | No Chemical Removal
From: $60.00- Sacrificial Coating Allows Tag Removal Without Chemicals
- Matte Finish for Little Change in Appearance
- UV Resistant Will Not Yellow
- Unpainted / Painted Surfaces
- Water Base, Low VOC, Eco-Friendly
- 1 Year Material Warranty
- Specified by Architects in 099623
Vanish Graffiti & Paint Remover | Professional Grade Tag Removal | Biodegradable
From: $75.00- Highly effective biodegradable professional grade graffiti remover
- Stays wetter longer ensuring maximum dwell time, making it ideal for hot weather removals.
- Great for porous concrete, brick, stone, wood as well as removing graffiti from tough split faced block, cinder block and exposed aggregate surfaces
- Safe and effective for use on all types of natural stone (such as limestone, granite, and marble), stainless steel, trees, plastics, and playground equipment
- Virtually odorless and non toxic.
- Easily rinsed with a small pressure washer requiring very little rinsing water. (Any resultant run off is a readily biodegradable gray water soap which can be left to biodegrade, recycled or further diluted for use in gardens etc.)
- No shadows, no damage, no harsh scrubbing required.
- Safe and effective for removals on asphalt roads
Vinyl Flake Fan Deck Samples | 38 Popular Factory Blended Colors | Marketing Tool
$47.00- Great Sales Sample and Selling Tool
- Great Way To Visualize 38 different vinyl flake color blend combinations
- Quickly Show Customers How You Can Make Their Floor Look Great using decorative Vinyl Flakes
- Actual Vinyl Flake 1/4", 1/8", 1/16", Hybrid Stone and Terrazzo Samples
Vinyl Paint Chips 1/4″ BY THE LB (11 lb Min) FOR SMALL PROJECTS For Epoxy, Polyaspartic, Ureth...
$8.50- Add A Decorative Look To Any Epoxy, Polyurea, Polyaspartic, Urethane Flooring Project
- 10 Different Pre-Mixed Color Blends To Choose From
- Mix & Match Different Blends together as Part of Your Total Order to Create Your Own Custom Look
- Hide Sub-Surface Imperfections
- Optimal Flexibility And Strength
- Colorfast, UV Stable Pigments
- Low Sound / Noise Deadening Qualities
SOLD BY THE LB (MIN 11 LB ORDER)
WB0090 World’s Best Concrete, Paver & Hard Surface Detergent Cleaning Concentrate | Biode...
From: $60.00- Environmentally Friendly Phosphate free and BIODEGRADABLE.
- Removes the toughest grease and grime for professional quality results every time.
- Great for both home residential and commercial cleaning
- Works on concrete, tile, stone pavers, asphalt and other hard surfaces
- Ideal for floors, pavers, concrete machinery, factories, fast food drive-throughs, kitchens etc.
- Use to clean and degrease oil stained concrete floors such as garages prior to applying an epoxy coating system
- Economical Concentrate Formula. Dilution rates to 1:100
- Low foaming and free rinsing.
Wet Look High Gloss Acrylic Sealer For Wood & Masonry
From: $47.00- High Gloss "Wet Look" Acrylic Sealer
- Beautiful Appearance
- Interior and Exterior Surfaces
- For Concrete, Masonry, Brick, Stone, Wood
- Breathable Coating
- UV Resistant Will Not Yellow and Eco-Friendly
Whiteboard Paint Dry Erase Water Based Polyurethane Coating
From: $65.00- Turns almost any surface into a Dry Erase Whiteboard
- Comes in Clear or White Color
- Write on it only 72 hours after application
- Tough, Durable, Long Lasting Dry Erase Surface
- Scratch Resistant
- Great Chemical and acid resistance
- MEK Double rub @50% solids Passed 2,000 Cycles Test
- Non-yellowing & UV resistant topcoat
- Odor Free and Zero VOC's
- Water Based and Non-Flammable
Wood Sealer & Water Repellent Premium Grade
From: $28.00- Wood Sealer is a Specialty Premium Grade Water Repellent and Sealer Designed for Wood
- Prevents Damage From Wind Driven Rain
- Tough, Durable, Stain Resistant Natural Finish
- To 5 Year Satisfaction Guarantee
- Eco-Friendly and Easy To Apply
ACL 395 Electrostatic Surface Resistivity ESD Test Meter | Compact Easy to Use
From: $60.00- Surface Resistivity Pocket Test Meter
- Conductive Rubber Rails For The Best Contact
- LED Readout For Conductive, Dissipative, Insulative Surface
- Easy to Use
- Testing Per Parrallel Resistivity Probe ASTM D257
- Resistivity Limits 103 - 1012 Ohms Per Square
- With 5 lb weights comply to IEC 61340-4-1, ANSI S4.1 & ANSI S7.1 to Measure Point to Point & Resistance to Ground
ACL 800 Digital Electronic Megohmmeter ESD Resistance | Resistivity | Temp | Humidity
$1,450.00- High Performance Digital Megohmeter Kit
- Measures Resistivity, Resistance, Temperature, Humidity
- Measurement range for 10v resistance is 103 to 106
- Measurement range for 100v resistance is 106 to 1012
- Accuracy ±10% at 103 - 108
- Using (2) supplied 5 lb weights comply to IEC 61340-4-1, ANSI S4.1 & ANSI S7.1 to Measure Point to Point & Resistance to Ground
- Includes calibration certificate traceable to NIST
- Available in Farenheit or Celsuis Scale
Copyright 2024 by Exterior Performance Coatings LLC