Return to previous page

SrubWorx 20.20 ESD Anti-Static Cleaner Concentrate

StaticWorx Formula 20.20 is a tough-acting, easy-to-use conductive floor cleaner, recommended for routine or quarterly cleaning of vinyl tile and all vinyl flooring surfaces. After initial maintenance, reapplication of Formula 20.20 does not require stripping the floor. Simply wash and buff.

Less expensive than ESD finishes or wax, ScrubWorx Formula 20.20 provides a semi-gloss, hassle-free finish that seals without affecting the electrical performance of the floor. This means there is no need for constant monitoring or testing the conductivity or static-generating capacities of the ESD surface.

ScrubWorx concentrated cleaner contains a powerful blend of surfactants and detergents. Non-toxic, non-flammable, non-corrosive, and biodegradable, StaticWorx ScrubWorx 20.20 is also 100% active.

With its unique fragrance and odor removal system, ScrubWorx 20.20 lifts alkaline buildup from other floor cleaners to reveal your floor’s natural shine, while eliminating odors at their source.

Used with StaticWorx Initial Surface Cleaning Pad (natural in color, with black strands), Formula 20.20 micro-cleans the surface of the tile resulting in a clean, high-performance, hospital-like shine.

The initial scrub pad is a thin gray pad, used for cleaning with EcoScrub stripper/degreaser or ScrubWorx cleaner. The pad used to apply Formula 20.20 is the Natural Hair Buffing pad.

Note: For its initial application, Formula 20.20 should be used only after stripping/degreasing the floor.

ScrubWorx is equally effective on vinyl, vinyl-asbestos, rubber, linoleum, ceramic and concrete surfaces. Environmentally safe, it is noncorrosive, nonflammable, and biodegradable. No protective clothing or ventilation required.

Why ScrubWorx 20.20 ESD Cleaner?

  • Static Conductive
  • High Activity Cleaner
  • Micro-Cleans & Conditions
  • Chemically Seals Tiles
  • Simple to Use
  • Can be used on most surfaces
  • Noncorrosive
  • Nonflammable
  • Biodegradable
Total Solids 10%
Coverage per gallon concentrate 4,000 sq’ (w/double application)
pH value 9.5-10.0
Surface Resistivity Surface Resistivity: 10 E6 – 10 E9 ohms/sq. per ASTM D257 @ 100V
Drying time 30 – 60 min @55% RH
Color Blue
Flashpoint None
Fragrance Mild

Application Instructions


  • Push broom
  • Clean and untreated mop
  • Buckets
  1. For initial maintenance scrubbing or stripping the floor, use Staticworx ESD EcoScrub floor stripper with a gray StaticWorx initial scrub pad.
  2. Place a StaticWorx cleaning pad (natural in color, with black strands) onto a low-speed floor machine.
  3. Using the mist setting on a trigger sprayer, mist StaticWorx 20.20 over the area to be cleaned.
  4. With the low speed machine, distribute the cleaner evenly over the area to be surface cleaned (about a 10’x10’ area at a time) – then begin buffing action.
  5. Buff the area until the solution is dry using an even back and forth motion. Approximately 5 passes per row should properly clean the surface, but take extra passes to assure complete surface uniformity.
  6. Continue the process until the surface of the entire area has been cleaned and is visually acceptable.
  7. Repeating the process a second time will maximize cleaning and appearance, if desired.

Note: Never buff in excess of 375 RPM


Active and highly concentrated, ScrubWorx must always be diluted with water.

  • Light soil: ¼ to ½ oz. per gallon of water for damp mopping and general light soil removal.
  • Normal soil: 1 oz. per gallon of water will remove and suspend soils and stubborn dirt.
  • Heavy soils: 6 oz to 16 oz. per gallon of water.

Will emulsify heavy soils and greases from most surfaces.