Shop
Filter By Category
Questions about our products?
Call or Text us for help picking the correct solution for your project. (630) 675-4509
Showing 1–50 of 445 results
-
ACL 880 Digital Electronic Megohmmeter ESD Resistance | Resistivity | Very High +/- 2% Precision Accuracy
- High Performance Digital Megohmeter Kit
- Alphanumeric LCD scale shows precise value
- Resistance range: 10³ - 10¹² ohms
- Test voltage range: <10 volt variable: 10³ - 9.9x103 ohms 10 volt ± 0.5 volts: 1.0x104 - 9.9x105 ohms 100 volt ± <5 volts: 1.0x10⁶ - 9.9x1012 ohms
- Accuracy: 10³ - 10¹⁰ ohms: < ± 2%, ± 2 counts 10¹¹ - 10¹² ohms: < ± 10%, ± 4 counts
-
1007 Polyurea Coating Fast Set Waterproof Elastomeric Spray | Flexible 600%+ Elongation | 10-30 Second Set Time | 100% Solids
- Excellent elongation – 600%+
- Protects wide variety surfaces - concrete, metal, wood etc
- Chemical Resistant
- High Impact & Abrasion Resistance
- Application temperature range 20°F to 200°F
-
10x Polyurea Interior Control Joint Filler | Quick Cure | Cold Temperature Apply Down To 0F
- Quick Back in Service
- Ideal for High Speed Application using Machine Dispensing System or for small projects easy application using twin cartridge kits and 300 ml x 300 ml cartridge kits
- High Shore Hardness for superior protection and support to joint edges
- Cold Application down to 0F
- Rapid curing
-
14” Heavy Duty Floor Scraper For Flake Removal and Stubborn Substances
- All steel construction, painted to prevent rusting
- 5' tubular steel handle
- Powder coated handle
- Removes wide variety of stubborn substances from floor
- Great for removing excess chips and flakes from basecoat prior to topcoat application on floor coating project
-
18″ Roller Cover For Epoxy, Urethane, Polyaspartic Coatings | 4 Sizes | Case of 24
- Shed resistant woven fabric for a virtually lint free finish with all paints, enamels, primers, urethanes, and epoxies.
- Available in 1/8", 1/4", 3/8" and 1/2" thick nap roller covers
- Economical Case of 24 roller covers
- 2x Quicker application than using 9" roller covers
- White Fabric Nap Cover
-
18″ Wooster Big Ben Roller Frame For Quick Application of Floor Coatings
- 18" Big Ben Roll Frame
- For 18" Roller Covers, 1-1/2" Standard Or 2-1/4" Jumbo Diameter
- Lightweight Yet Strong Polypropylene Construction
- Quickly Install Or Remove The Roller Cover
- For 18 Inch roller covers with 1 1/2 Inch standard or 2 1/4 Inch jumbo Diameter and can be used with all nap heights
-
18″ Wooster Pro Doo Z Cover For Epoxy, Urethane, Polyaspartic Coatings | 6/Box | 2 Sizes
- Shed resistant woven fabric for a virtually lint free finish with all paints, enamels, primers, urethanes, and epoxies.
- Available in 3/8" and 3/4" thick nap roller covers
- Exclusive golden pinstripe design stays resilient, resists matting.
- Green double thick polypropylene core resists water, solvents, and cracking.
- Sold in Boxes of 6 Sleeves
-
18″ Wooster Sherlock Wide Boy Frame For Quick Application Epoxy, Urethane, Polyaspartic Coatings
- Sherlock Wide Boy Frame
- Holds Roller Covers 12" To 18" Long With 1-1/2" Standard Or 2-1/4" Jumbo Diameter
- Extra Strength Steel Wing Nut Design
- Rigid Tubular Steel Frame Arms
- Adjusts to hold roller covers 12 Inch to 18 Inch long with 1 1/2 Inch standard or 2 1/4 Inch jumbo Diameter and can be used with all nap heights
-
24″ Flat Floor Squeegee For Epoxy & Polyaspartic Coatings
- 24" Speed Squeegee
- For Quicker and Easier Application of thicker mil (thickness) floor coating systems
- A floor coating standard, just grab it,use it, and toss it or clean it
- Light weight, high performance, re-usable plastic floor squeegee
- Makes installing floors a breeze
-
24″ Notched Floor Squeegee 3/16″ Deep For Epoxy & Polyaspartic Coatings
- 24" Speed Squeegee, 3/16" notch, Threaded Handle Adapter
- For Quicker and Easier Application of thicker mil (thickness) floor coating systems
- A floor coating standard, just grab it,use it, and toss it or clean it
- This one has our own special twist, a threaded handle adapter
- Features an aluminum frame with a red rubber solvent resistant blade
-
3003 Polyurea Slow Set Interior Control Joint Filler | Low Temp -20°F
- Offers load transfer across control joints for good protection of edges
- Back-in-Service "Drive-Over" in 30 to 60 minutes
- Longer working time than the 3004 Fast Set Polyurea
- 5-8 Minute Gel Time @ 77°F
- Meets USDA Requirements for incidental food contact
-
3004 Polyurea Fast Set Interior Control Joint Filler | Low Temp -20°F
- Quick Back-in-Service "Drive-Over" in only 20-30 minutes
- Offers load transfer across control joints for good protection of edges
- Ideal for High Speed Application using Machine Dispensing System or for small projects easy application using twin cartridge kits and 300 ml x 300 ml cartridge kits (total 21 oz or 600 ml per cartridge kit)
- Tack Free only 2-3 minutes
- Meets USDA Requirements for incidental food contact
-
3246 Polyurea Flexible Expansion Joint Filler | Quick Cure | Exterior Interior | Low Temp -20°F | Elongation 600%+
- Quick set with "Drive-Over" in 30 to 45 minutes
- High Density Polyurea
- Very Flexible with Elongation ASTM D124 >600%
- Meets USDA Requirements for intermittent contact
- Meets FAA P605 – for airfield joints
-
4″ x 18″ Pebble Bond Hand Trowel | Professional River Rock Finishing Tool
- Professional 4" x 18" steel finishing blade
- Comfortable wooden handle for improved grip and control
- Ideal for Pebble Bond epoxy and river rock installations
- Helps create a smooth, consistent stone finish
- Recommended for use with Pebble Bond Trowel Slick
-
4000 Acrylic Static Dissipative Clear Floor Finish
- Coverage is approximately 1500 – 2000 sq. ft. per gallon
- V.O.C. is less than 4%
- Solids are 20%± 5%
- UL listed for slip resistance
- Compliant to ANSI/ESD S20.20
-
4010 Acrylic ESD Floor Stripper Concentrate
- Prepares floor for application of acrylic based ESD floor finishes
- No ammonia or phosphates
- Effective in hard or soft water
- Low 6% V.O.C.
- Zero tribogeneration
-
4018 Acrylic Dissipative Floor Finish
- Covers 2 coats of approximately 750-1000 sq ft per gallon
- VOC <4%
- 18% Solids, ±5%
- UL listed for slip resistance
- Compliant to ANSI/ESD S20.20
-
4020 ESD Neutralizer Cleaner Concentrate
- Economical concentrate
- Dilute 1:128 cleaner to water
- Neutral pH 7.2
- Low foam - no streaking formula
- Non-toxic and biodegradable safe for sewage & septic systems
-
4030 ESD Neutralizer Cleaner Ready-to-Use
- Ready-to-use (also available as a concentrate, see 4020)
- Neutral pH 7.2
- Low foam - no streaking formula
- Non-toxic and biodegradable safe for sewage & septic systems
- Non-abrasive
-
4040 Universal Cleaner Concentrate | Use on Electronic Manufacturing, ESD Floor, Concrete Floor | Degreaser
- Powerful degreaser
- Safe for ESD tile, epoxy and paint
- Neutral pH
- No phosphate, ammonia or bleach
- Dilution ratio 5:1 (5 parts water to 1 part cleaner)
-
4100 ESD Restorer | Cleaner Concentrate
- Lengthens maintenance cycle
- Removes black heel marks
- Revitalizes gloss
- Surface resistivity: 107–109 ohms per square @100 volts
- High solids concentrate
-
4400 ESD Polyurethane Anti-Static Floor & Wall Paint | ANSI/ESD S20.20 | Zero VOC | Reinforcing Fibers
- Provides 100% anti-static control, even at low levels of humidity
- Conforms to ANSI/ESD S20.20-2020 when tested according to ANSI/ESD STM7.1
- Static dissipative: 105 to 108 ohms
- Water based with Zero VOC- 0 g/L
- High physical durability with reinforcing fibers
-
4600 Ultra Static Dissipative Clear Urethane Floor Finish
- High performance with exceptional static control
- For Use on vinyl, linoleum, or ceramic tile
- Offers high gloss, slip resistant & abrasion resistant finish
- More economical than other leading ESD floor finishes
- Resists powdering or flaking, even in dry condidtions
-
4800 Ultra II Static Dissipative Clear Urethane Floor Finish
- Coverage 1,500 - 2,000 sq'/gallon
- Strip cycle 12 -18 months
- Suitable to use on ESD tile, epoxy and concrete floors
- Surface resistivity: 107 - 109 ohms per square (average)
- Low voc
-
4G Surface Guard: Walls & Floors | Advanced Protection | Easy Application | Fast Drying
- Advanced Protection: Safeguard surfaces against water and oil with hydrophobic and oleophobic properties.
- Easy Application: Apply effortlessly using a brush, roller, airless sprayer, or pump sprayer.
- Fast Drying: Achieve quick results with a fast drying time.
- Invisible Finish: Maintain the natural appearance of surfaces without altering their friction or slip resistance.
- Environmentally Friendly: Water-based formula with no solvents or VOCs, ensuring no unpleasant odors.
-
5 Quart Measuring Bucket For Epoxy, Polyaspartic, Urethane Coatings | Box of 10
- 5 quart size for smaller projects
- semi-transparent tub with visible quart and liter calibrations for easy mixing/measuring
- Solvent resistant, reusable and recyclable
- Sold in bundles of 10
- Also available with matching snap-on plastic lids
-
5″ Concrete Pro Hand Grinder Kit | Metabo WEV-125 Quick HT | Dust Shroud and (1) 9 Segment Wheel
- Hand-held units that are great for smaller jobs or in combination with walk-behind grinders on larger projects
- Use on concrete for cleaning, leveling high spots or uneven floor surfaces, removing glues, mastic, epoxies and other coatings
- May be connected to a variety of dust collection systems for dust containment
- The unit’s polyurethane dust shroud is long lasting and is offered in full shrouds and convertible models that flip up to allow for edge work along walls
- Kit include electric grinder, dust shroud (full or convertible), (1) 9 Segment Diamond Turbo Cup Arbor Wheel and hardware for mounting threaded diamond cup wheels, ZEC wheels, or polishing pads
-
5500 Polyaspartic Polyurea Coating Roll Down Low Temp 30°F | 87% Solid
- Beautiful Clear Appearance
- Quick recoat time in as little as 1 – 1.5 hours
- Waterproofing Elastomeric Systems
- Good In Submerged Service Projects Like Fountains
- Works well on concrete, brick, steel, wood, fiberglass
-
5500HS 100% Solids Polyaspartic Polyurea Coating Roll Down | Low Temp 30°F | Flexible 120% Elongation | 1:2 Mix Ratio | 1 Coat Coverage
- Beautiful Clear HIGH GLOSS Appearance
- 100% Solids For Thick 1 Coat Coverage Full Flake, Quartz, Silica Sand Systems to 16 mils DFT (100 sq'/gallon)
- Quick 24 hour back in-service (at 75F)
- Waterproofing Elastomeric Systems
- Good In Submerged Service Projects Like Fountains
-
5500M Matte Finish Polyaspartic Polyurea Coating Roll Down | Low Temp 30°F | 89% Solids | Flexible 120% Elongation
- Beautiful Clear MATTE FINISH Appearance
- Quick recoat time in as little as 1 – 1.5 hours and 24 hour back in-service (at 75F)
- Waterproofing Elastomeric Systems
- Good In Submerged Service Projects Like Fountains
- Outstanding Chemical Resistant
-
6007 Wet Condition Epoxy For Concrete & Steel | Low Temp 35°F | 100% Solids
- May be applied in damp and wet conditions where wash-down of areas is problematic
- Withstands up to 15-18 psi hydraulic vapor pressure
- Provides protective attractive color coat epoxy flooring system
- Excellent working properties
- Exceptional corrosion protection of both concrete and steel
-
6009 Epoxy Floor Coating Industrial & Commercial Low Temp 35°F | 100%
- Protective and attractive color coat epoxy flooring system
- Designed to seal floors against abrasion, water, oils and chemicals
- Good Color stability
- Wide application temperature range 35°F to 125°F (1.7°C to 52°C)
- Quick re-coat time 4-5 hours (at 75°F)
-
6210 ESD Polycoat Anti-Static Floor Paint | Dissipative | Clear | ANSI/ESD S20.20-2014
- Suitable for dissipative packaging outlined in ANSI/ESD S20.20
- Resistance: 10e6-10e9 ohms/sq when tested to ANSI/ESD STM11.11 88
- Dissipative Coating
- Water-based polyurethane with zero VOC
- Reduces tribocharging
-
6700 Premium ESD Static Dissipative Anti-Static Floor Paint | 9 Colors | ANSI/ESD S20.20-2014
- Static dissipative 10e7 - 10e9 ohms
- Conforms to ANSI/ESD S20.20-2014 when tested according to ANSI/ESD STM7.1
- No hot spots
- Excellent adhesion and color retention
- Good resistance to abrasion, oils and washing
-
6700C Premium ESD Static Conductive Anti-Static Floor Paint | 3 Colors | ANSI/ESD S20.20-2014
- Static conductive 10e3 - 10e6 ohms
- Conforms to ANSI/ESD S20.20-2014 when tested according to ANSI/ESD STM7.1
- No hot spots
- Excellent adhesion and color retention
- Good resistance to abrasion, oils and washing
-
7″ Concrete Pro Hand Grinder Kit | Metabo W24-230 | Dust Shroud | (2) 12 Segment Wheels | Loop Handle
- Hand-held units that are great for smaller jobs or in combination with walk-behind grinders on larger projects
- Use on concrete for cleaning, leveling high spots or uneven floor surfaces, removing glues, mastic, epoxies and other coatings
- May be connected to a variety of dust collection systems for dust containment
- The unit’s polyurethane dust shroud is long lasting and is offered in full shrouds and convertible models that flip up to allow for edge work along walls
- Kit include electric grinder, dust shroud (full or convertible), (2) diamond cup grinding wheels and hardware for mounting threaded diamond cup wheels, ZEC wheels, or polishing pads
-
7001 Polyurethane Primer Concrete & Steel | Quick Cure | Exceptional Adhesion | Low 35F Temp
- Concrete & Steel Primer For Epoxy, Urethane, Polyaspartic, Polyurea Coatings
- Cross-links With Polyurea, EPDM Roofing and other Plastic Materials Difficult to Bond to
- Deep Penetrating Exceptional 1200 psi Adhesion
- Superior Corrosion, Abrasion and Water Resistance
- For Use in Submerged Service Applications
-
8″ x .125″ x 7/8″ Tiger Tooth Blade
- Flat profile for less tool marks on the concrete
- Softer blades for better performance on hard concrete
- 12 segments for longer life vs blades with fewer segments
- 30/40 grit great for both removing existing coatings and roughing up concrete for typical garage, basement and patio floor projects
- Longer threaded arbor eliminates need for added bushings, nuts or spacers when used with US Saws Dust Shrouds
-
8″ x .250″ x 7/8″ Premium Concrete Blade
- Flat profile for less tool marks on the concrete
- Softer blades for better performance on hard concrete
- 12 segments for longer life vs blades with fewer segments
- 30/40 grit great for both removing existing coatings and roughing up concrete for typical garage, basement and patio floor projects
- Longer threaded arbor eliminates need for added bushings, nuts or spacers when used with US Saws Dust Shrouds
-
800 Slow Set Polyurea Adhesive Sealant & Caulk
- Back in-service 1 - 1.5 hours, recoat 30-45 minutes, full cure 6-8 hours
- High chemical & fuel resistance
- Highly adhesive to many substrates
- Good working time, quick gel time 6-10 minutes, trowel-able
- Cartridge or pump dispensed
-
8090 Mat Grounding Cord for ESD Floor Mats
- 10' coated high - strength tensile wire
- 10mm male stud connection to mats
- Ring-style termination for connecting to ground point
- 1 Met ohm resistor
-
830 Fast Set Polyurea Repair | Joint Sealant | Caulk | Adhesive | No Sag Walls | Concrete | Steel | Wood
- Vertical hold directly from the cartridge or static mixer
- Can be sprayed over with polyurea in a short time
- High chemical resistance, fuel resistant,
- Highly adhesive to many substrates
- Cold weather application down to -20F
-
9″ Roller Cover For Epoxy, Urethane, Polyaspartic Coatings | 4 Sizes | Case of 36
- Shed resistant woven fabric for a virtually lint free finish with all paints, enamels, primers, urethanes, and epoxies.
- Available in 1/8", 1/4", 3/8" and 1/2" thick nap roller covers
- Economical case of 36 Roller Covers
- White Fabric Nap Cover
- Phenolic Core
-
9″ Roller Frame For Epoxy, Urethane, Polyaspartic Coatings | Case of 12
- 9" Economical Roller Frame
- Sturdy 5 Wire Cage Plastic Endcaps
- Chrome Plated 5/16" Shank
- Plastic Threaded Grip For Extension Pole Use
- Sturdy 5 wire cage and plastic endcaps
-
9″ Wooster Pro Doo Z Roller Cover For Epoxy, Urethane, Polyaspartic Coatings | 12/box | 2 Sizes
- Shed resistant woven fabric for a virtually lint free finish with all paints, enamels, primers, urethanes, and epoxies.
- Available in 3/8" and 3/4" thick nap roller covers
- Exclusive golden pinstripe design stays resilient, resists matting.
- Green double thick polypropylene core resists water, solvents, and cracking.
- Sold in Boxes of 12 Sleeves
-
9″ Wooster Roller Frame For Epoxy, Urethane, Polyaspartic Coatings
- 9" Acme Heavy Duty Roll Frame
- Sturdy 5 Wire Cage Plastic Endcaps
- Chrome Plated 5/16" Shank
- Plastic Threaded Grip For Extension Pole Use
- Sturdy 5 wire cage and plastic endcaps
-
ABC Primer 914 | Quick Cure Epoxy Primer | 30-Minute Recoat
- 30-Minute Quick Cure – Cures quickly to allow overcoating in approximately 30 minutes, helping reduce project downtime.
- Excellent Adhesion – Creates a tacky bonding surface that improves adhesion for FRP systems and non-self-priming coatings.
- Low-Viscosity Formula – Applies smoothly by brush or roller for fast, uniform coverage.
- Solvent-Free Epoxy – 100% solids, VOC-free epoxy formulation designed for industrial repair and maintenance applications.
- Improves Composite Bond Strength – Promotes a strong bond between the substrate and fiberglass reinforced plastic (FRP) composite systems.
-
AcrylicPoly DTM² Acrylic Modified Polyurethane WaterProofer & Primer | Flexible | Metal Concrete Masonry Wood Plastic | Non-Yellowing
- Excellent breathable waterproofing topcoat that offers a flexible, chemical resistant, non-yellowing film over painted and unpainted surfaces
- Great for use as direct to metal corrosion resistant primer over steel
- Primer for concrete, masonry, wood, plastic surfaces
- Scratch Resistant
- Non-yellowing & UV Resistant Topcoat
-
Advanced Waterproofer Multi-Surface 10 Yr Water Repellent
- Long lasting and virtually indestructible water repellent protection
- Penetrates deep and will not wear off with heavy vehicle or foot traffic
- Prevents growth of mold & mildew
- Does not change the appearance of the surface
- Stain resistant to oil, gas and anti-freeze
-
AEROSIL R 202 Fumed Silica Thickening Agent For Epoxy Concrete Crack and Joint Repair | 22 lbs (10 kg) | Evonik
- Great thickening agent to wide range of coatings including epoxy and polyurethane coatings
- Allows coatings to be used as great concrete crack, hole, joint and spall repairs
- When mixed into fast cure epoxy, makes for very quick repairs