Waterproofing & Sealers
Filter By Category
Questions about our products?
Call us for help picking the correct solution for your project. (630) 675-4509
Showing 1–50 of 71 results
-
Plugger 25 Clear Acrylic Flat Sealer | Masonry, Concrete, Wood, Brick, Stucco | Water Repellent
- Labor and material water repellent warranty available for 3 years
- Seals and binds chalked surfaces and improves adhesion of topcoat materials
- Helps prevent efflorescence
- Stain resistant
- May be applied to previously painted and properly prepared surfaces
-
Micro-seal Silane Siloxane Water Repellent | Concrete Brick Block Stucco | Clear Non Film Forming | ASTM Tested Against 98 mph Wind Driven Raing
- Labor and material water repellent warranty available for 10 years, up to 20 years using concentrate formula
- Easy to use Concentrates available that saves money, time and easier on the environment!
- ASTM tested for superior performance in stopping water and salt damage
- 100% Eco-friendly: low VOC
- Stain resistant to oil, gas and anti-freeze
-
Blok-lok Silane Siloxane Vertical Wall Water Repellent | Concrete Brick Block Stucco
- Labor and material water repellent warranty available for 5 years
- Easy to use Concentrates available that saves money, time and easier on the environment!
- ASTM tested for superior performance in stopping water and salt damage
- 100% Eco-friendly: low VOC
- Excellent mold and mildew inhibitor
-
Floor-lok Concrete Floor Sealer and Curing Aid Concentrate
- Warranty available for 1 year
- Easy to use Concentrate
- 100% Eco-friendly: low VOC
- Stain resistant to oil, gas and anti-freeze
- Floorlok does not alter surface appearance & UV resistant - will not yellow
-
Super Stucco Silane Siloxane Sealer Concentrate Protects 98 mph Wind Driven Rain
- 5 year labor/material warranty available
- Easy to use Concentrates
- ASTM tested for superior performance in stopping water damage
- 100% Eco-friendly: low VOC
- Excellent mold and mildew inhibitor
-
Plugger 10 Clear Masonry & Wood Acrylic Flat Sealer
- Labor and material water repellent warranty available for 3 years
- Seals and binds chalked surfaces and improves adhesion of topcoat materials
- Helps prevent efflorescence
- Stain resistant
- May be applied to previously painted and properly prepared surfaces
-
Satin-Lok Wet Look High Gloss Acrylic Sealer | Concrete, Masonry, Wood, Brick | UV Resistant
- Protects and beatifies surfaces with a “wet look” high gloss finish
- Alkali-resistant sealer for masonry and concrete
- Resists flaking and has excellent adhesion
- Protection not effected by weathering or UV light
- Excellent wear and abrasion resistance
-
CLEAR-SEAL High Gloss Acrylic Urethane Sealer
- Heavy duty Impact and wear resistant
- Non-yellowing formulation
- Resistant to stains, acids, bases, gasoline, alcohol and oil (vegetable and motor)
- Low odor
- Non-hazardous
-
CLEAR-SEAL Low Gloss Acrylic Urethane Sealer
- Heavy duty Impact and wear resistant
- Non-yellowing formulation
- Resistant to stains, acids, bases, gasoline, alcohol, oil (vegetable & motor)
- Resists UV rays - won't yellow
- Environmentally-friendly, low odor, Non-hazardous
-
Tinted Waterproofer Transparent Stain and Water Repellent | Wood | Concrete
- 3 year satisfaction guarantee
- Outstanding water repellent protection
- Penetrates and does not change surface texture
- UV resistant
- Stain resistant to oil, gas and anti-freeze
-
Wet Look High Gloss Acrylic Sealer For Wood & Masonry
- Beautiful high gloss water and stain resistant protection
- Mold and mildew resistant
- For use on vertical or horizontal surfaces which can be painted/stained or unpainted/unstained
- Micro-Lok technology provides a tough, durable, long lasting sealer
- Non-yellowing, resists UV damage for superior outdoor performance
-
Brick Sealer & Water Repellent – Breathable Silane/Siloxane Protection for Brick, Masonry & Pavers
- Stops Wind Drive Rain From Coming Through Brick Walls
- Protects Mortar From Moisture Damage
- Tough, Durable Clear Finish Does Not Change Look of Surface
- UV Resistant - Will not yellow
- Covers up to 150 sq'/gallon Depending on Porosity of Surface
-
Stone Sealer & Water Repellent Premium Grade
- Penetrates deep – Perfect for use on walkways, chimneys, and walls
- Tough, Durable Natural Looking Clear Finish
- Does Not Change Look of Surface
- Excellent mold and mildew inhibitor
- Stain resistant to oil, gas and anti-freeze
-
Concrete Sealer and Water Repellent Premium Grade Clear Protection
- Penetrates deep into the surface to help keep water out
- Great winterizing agent – Protects concrete from icing and salt infiltration
- Stain resistant to oil, gas and anti-freeze
- For All Vertical and Horizontal Unpainted Concrete Surfaces
- Tough, Durable Natural Looking Clear Finish Does Not Change Look of Surface
-
Paver Sealer & Water Repellent Premium Grade
- Penetrates deep creates a tough, durable clear finish
- Does Not Change Look of Surface
- Excellent mold and mildew inhibitor
- Stain resistant to oil, gas and anti-freeze
- Install down to 40°F (4.4°C)
-
Stucco Sealer & Water Repellent Premium Grade Stucco Protection
- Stops Wind Drive Rain From Coming Through Stucco Walls
- Tough, Durable Natural Looking Clear Finish
- Does Not Change Look of Surface
- UV Resistant - Will Not Yellow
- Excellent mold and mildew inhibitor
-
Wood Sealer & Water Repellent Premium Grade
- Penetrates deep into the surface to help keep water out
- Stain resistant to oil, gas and anti-freeze
- For All Vertical and Horizontal Unpainted Wood Surfaces
- Tough, Durable Natural Looking Clear Finish Does Not Change Look or texture of Surface
- Excellent mold and mildew inhibitor
-
Paint Sealer & Water Repellent Premium Grade
- Prevents growth of mold and mildew
- Prevents absorption of water
- Stain resistant
- Will not yellow
- Easy to use – Same day, two coat application
-
Salt Guard Road Salt & Ice Damage Premium Grade Concrete Protection
- Penetrates deep – Perfect for use on sidewalks, driveways and patios
- Apply prior to using “Ice Melt” for easy ice and snow removal
- Can be used on green, newly poured concrete
- Great winterizing agent – Protects unpainted porous surfaces from icing and salt damage
- Easy to use – Same day, two coat application using a hand pump garden sprayer
-
Hydro-Lok™ Fabric Super Hydrophobic Liquid Repellent
- Excellent liquid and stain protection for wide range of materials and surfaces
- Easy to use sprayer (non pressurized) - one component - no mixing
- 100% Eco-friendly: low VOC 7 g/L, low odor, non-flammable
- Dries completely clear - no haze
- Excellent mold and mildew inhibitor
-
Advanced Waterproofer Multi-Surface 10 Yr Water Repellent
- Long lasting and virtually indestructible water repellent protection
- Penetrates deep and will not wear off with heavy vehicle or foot traffic
- Prevents growth of mold & mildew
- Does not change the appearance of the surface
- Stain resistant to oil, gas and anti-freeze
-
CMW 8000 Lithium Moisture Vapor Barrier and Concrete Densifier
- Blocks moisture vapor and hydrostatic pressure reducer
- Used in joints to stop vapor/water pressure damage to joint materials
- Permanent - becomes part of the concrete
- Stops minute fracture weeping of moisture (may require several coats)
- In areas of high humidity and salt air - reduces corrosive activity to rebar within concrete
-
Gloss Sealer For Masonry and Wood | Premium Grade Acrylic
- Prevents growth of mold and mildew
- Prevents absorption of water
- Stain resistant
- Will not yellow
- Easy to use – Same day, two coat application
-
E5030CL Urethane Clear Sealer / Topcoat WB
- Attractive, clear aliphatic non yellowing finish
- Versatile product good on concrete and masonry surfaces
- Recoat only 1-2 hours & light foot traffic 2-4 hours
- Extended 24 hour pot life
- Excellent abrasion resistance (Taber Abrasor test only 10 mg loss)
-
CLEAR-SEAL 100% Urethane Super Premium Sealer| Low Gloss
- Excellent Impact and wear resistant
- Resists hot tire pick-up for vehicular applications
- Performance Additive Available for Even Better Performance
- Excellent Chemical and Stain Resistance
- Resists UV rays - won't yellow
-
CLEAR-SEAL 100% Urethane Super Premium Sealer | High Gloss
- Excellent Impact and wear resistant
- Resists hot tire pick-up for vehicular applications
- Performance Additive Available for Even Better Performance
- Excellent Chemical and Stain Resistance
- Resists UV rays - won't yellow
-
H20 ZioTHANE Semi-Gloss Urethane Concrete Floor Sealer/Topcoat
- Tough, durable topcoat for epoxy floor coatings
- Excellent chemical and abrasion resistance
- Exceptional impact resistance
- Aliphatic, UV Stable and will not yellow
- Beautiful clear, semi-gloss appearance
-
H20 zioTHANE Low Gloss Urethane Concrete Floor Sealer / Topcoat
- Tough, durable topcoat for epoxy floor coatings
- Excellent chemical and abrasion resistance
- Exceptional impact resistance
- Aliphatic, UV Stable and will not yellow
- Beautiful clear, low gloss appearance
-
E322HW High-Gloss Aliphatic Urethane Abrasion & Chemical Resistant Low
- Outstanding durability with impact resistance of 160 in lb (Gardner Impact test)
- Excellent abrasion resistance Only 22 mg loss (Tabor Abrasion test) Reduced to 10 mg loss using our High Wear 325 additive
- Cold temperature application down to 45F
- Excellent Chemical Resistance
- Aliphatic, UV Stable and will not yellow
-
UW601 Underwater Concrete Crack Filler Epoxy Paste Repair
- Make Repairs Underwater or on Wet Surfaces
- Concrete and Masonry
- Both Horizontal & Vertical Repairs
- Good for Cracks up to 1/8" and Thin Build Repairs
- 100% solids with 0 voc
-
UW602 Underwater Pourable Concrete Crack Filler Epoxy Repair
- Make Repairs Underwater or on Wet Surfaces
- Concrete, Cement and Masonry
- Both Horizontal & Vertical Repairs
- Good for Cracks and Wide Variety of Repairs
- Easy to Use Pourable Formula
-
E100V Vertical Wall High Build Epoxy Coating | Underwater Concrete | P
- No sagging on vertical walls up to 12 mils per coat
- Good chemical and abrasion resistance
- Works well on underwater concrete decorative surfaces including pools and water features
- Long 45 - 90 min pot life
- Outstanding adhesion 475 psi @elcometer
-
Pigment to Color 5500 Polyaspartic | 17 colors
Starting at $59.00 -
E5520 Low Gloss Urethane Water Base Abrasion & Chemical Resistant
- Outstanding durability with impact resistance of 160 in lb (Gardner Impact test)
- Excellent abrasion resistance Only 23 mg loss (Tabor Abrasion test) Reduced to as low as 10 mg loss using our High Wear 325 additive
- Excellent Chemical Resistance
- Aliphatic, UV Stable and will not yellow
- Great for Indoor Concrete Floor Projects
-
Cool Coat White Thermal Barrier Heat Reflective Insulating Wall Paint | Elastomeric | Cools Surface
- Reflects Infrared Radiation Using Advanced Ceramic Sphere Technology
- Ready-to-Use White Color - Flat Finish
- Lower Cooling Costs in Summer When Applied to Exterior Walls & Roofs
- Use to cool metal surfaces like handrails in the hot summer sun
- Lower Heating Costs in Winter When Applied to Interior Walls
-
Cool Coat Tint Base Thermal Barrier Heat Reflective Insulating Paint (Custom Colors) | Elastomeric | Cools Surface
- Reflects Infrared Radiation Using Advanced Ceramic Sphere Technology
- Custom Color Locally Using One of Our 3 Tint Bases
- Create most colors with our Pastel, Deep and Accent Tint Base options
- Lower Cooling Costs in Summer When Applied to Exterior Walls & Roofs
- Use to cool metal surfaces like handrails in the hot summer sun
-
Cool Coat Clear Thermal Barrier Heat Reflective Insulating Wall Paint | Elastomeric | Cools The Surface
- Clear protection - allows underlying surface color to be seen (it "can" be slightly hazy over dark accent colors only)
- Reflects Infrared Radiation Using Advanced Ceramic Sphere Technology
- Lower Cooling Costs in the Summer When Applied to Exterior Walls & Roofs
- Cool painted metal surfaces like metal handrails from the hot summer sun
- Lower Heating Costs in Winter When Applied to Interior Walls
-
Polyurethane HD IsoFree Aliphatic 2K Floor Coating | High Gloss Satin Matte Flat | Low Temp 40 °F | Non-Yellowing
- Scratch Resistant
- Great Chemical and acid resistance
- MEK Double rub @50% solids Passed 2,000 Cycles Test
- Non-yellowing & UV resistant topcoat
- Apply Direct-to-metal* and concrete
-
E591 / E590 Wet Surface Epoxy | Apply Underwater | Cures to 35°F | Concrete – Steel | Floors – Walls
- May be applied on wet or under water surfaces
- Self-priming on steel and on most concrete applications
- Cold temperature cure down to 35F
- Ideal for marginally prepared and painted surfaces
- Outstanding impact and abrasion
-
E356HG High Gloss Urethane Moisture Cured | Exceptional Abrasion & Chemical Resistance | UV Stable
- Superior abrasion resistance Only 4.4 mg loss (Tabor Abrasion test)
- Outstanding Chemical Resistance
- Excellent durability with impact resistance of 100 in lb (Gardner Impact test)
- Aliphatic, UV Stable and will not yellow
- Easy to Use One Part with Long 3-5 Hour Pot Life
-
E322SG Semi-Gloss Aliphatic Urethane Abrasion & Chemical Resistant Low
- Outstanding durability with impact resistance of 160 in lb (Gardner Impact test)
- Excellent abrasion resistance Only 24 mg loss (Tabor Abrasion test) Reduced to 12 mg loss using our High Wear 325 additive
- Cold temperature application down to 45F
- Excellent Chemical Resistance
- Aliphatic, UV Stable and will not yellow
-
E101C Moisture Cured Urethane Clear Heavy Traffic Floor Sealer | Dustproofer | Prevents Spalling
- Great heavy duty stain resistant floor sealer for warehouse and other heavy use areas
- Excellent adhesion and sealer for concrete, wood and masonry surfaces.
- Extremely hard, yet flexible film.
- Outstanding “wearing properties
- Highly resistant to abrasion and impact.
-
Mend-Con RTU Concrete Repair | Wet Conditions & Underwater | Vertical No Sag | Quick Cure | Paintable | Also Stucco | Wood | Metal
- Repair in Wet conditions - Apply Underwater
- Great for Pool Repairs
- High strength epoxy
- Bonds to fresh or hardened concrete, stucco, wood, metal
- No Sag No Drip Formula - perfect for Vertical, Overhead or Horizontal surfaces
-
E669 Clear Acrylic Lacquer High Gloss Sealer | Concrete | Brick | Wood | Solvent Based | Outstanding Adhesion
- Non-yellowing, high gloss. properties.
- Excellent penetration and high “wetting out”
- Excellent adhesion to concrete.
- Great for Concrete, Masonry & Wood Surfaces
- Good UV resistance.
-
Tec-Top Elastomeric Waterproofer | Flexible 200% Elongation | 100% Acrylic | Concrete Brick Wood Metal Stucco | Walls & Floors
- Great for use on Brick, Stucco, Cement, Concrete, Wood, Metal and EIFS
- Protects both Exterior Vertical Walls and Horizontal surfaces
- Flexible Coating That Bridges small cracks
- Low VOC < 2g/L and Low Odor
- High UV Resistance
-
Micro-Seal SiH4 100% Silane Deep Penetrating Water Sealer | UV Resistant | Concrete | Stucco | EIFS | CMU Block | Clay Tile
- Small Particle Size for Deeper Penetration and longer lasting results
- Will not yellow, haze, crack or peel
- Overspray Does not etch metal or glass
- No film formation - does not change looks of the surface
- Allows substrates to breathe without trapping moisture
-
Sale!
Tec-Top Textured Elastomeric Coating | Flexible 215% Elongation |100% Acrylic | Concrete Stucco Masonry
- Great looking high build textured coating
- Textured surface looks good and hides surface imperfections and bridges small cracks
- Excellent Hide with medium texture
- Flexible 215% elongation bridges cracks
- Fast Drying
-
E5521 High Gloss Urethane Water Base | Abrasion & Chemical Resistant | Low Odor | Vapor Permeable
- Outstanding durability with impact resistance of 120 in lb (Gardner Impact test)
- Excellent abrasion resistance Only 21 mg loss (Tabor Abrasion test) Reduced to as low as 10 mg loss using our High Wear 325 additive
- Excellent Chemical Resistance
- Aliphatic, UV Stable and will not yellow
- Great for Indoor Concrete Floor Projects
-
P3 Industrial | Waterproofs Concrete | Permanent Salt, Freeze Thaw, Abrasion Protection | Nano-Technology | Exterior & Interior
- Permanent Concrete Waterproof and Physical Protection With Only 1 Application Using Colloidal Silica Nano-Technology Reduced cost of maintenance and life cycle costs Indoors / Outdoors on Horizontal / Vertical Concrete Reduces Depth of Penetration of Water Under Pressure 97% EN 12390-8 Withstands Min 75lbs+ Hydrostatic Vapor Pressure Resistance to Concrete Freeze / Thaw damage increased 49% ASTM C666 Excellent Protection Against Salt Corrosion, Improved 48% ASTM C1556 Deep Penetration Min 1.5"+ For Exceptional Results Improved abrasion resistance 50% ASTM C1803 Cures New Concrete 14 days then Apply Coatings Significantly Improved Stain Resistance Apply to wet or damp concrete Easy Spray Application Zero VOC 15 Year Performance Warranty
-
P3 Marine | Saltwater, Fresh Water & Chloride Concrete Protection | Waterproofs | Permanent Salt, Freeze Thaw, Abrasion Improvement | Nano-Technology
- Exceptional Marine Saltwater and Winter Road Salt Concrete Waterproof Protection from moisture, chloride salt, other contaminant penetration
- Great for Marine and Inland Waterway concrete infrastructure, docks, ramps, bridges, roads, parking lots
- Easy Spray Apply Low Tide and Wet Concrete Surfaces Horizontal & Vertical
- Increased Concrete Durability and Life Span with 1x Permanent Application Using Colloidal Silica Nano-Technology
- Reduces Depth of Penetration of Water Under Pressure 90% EN 12390-8