Specialty Coatings
Filter By Category
Questions about our products?
Call us for help picking the correct solution for your project. (630) 675-4509
Showing 1–50 of 165 results
-
4100 ESD Restorer | Cleaner Concentrate
- Lengthens maintenance cycle
- Removes black heel marks
- Revitalizes gloss
- Surface resistivity: 107–109 ohms per square @100 volts
- High solids concentrate
-
4800 Ultra II Static Dissipative Clear Urethane Floor Finish
- Coverage 1,500 - 2,000 sq'/gallon
- Strip cycle 12 -18 months
- Suitable to use on ESD tile, epoxy and concrete floors
- Surface resistivity: 107 - 109 ohms per square (average)
- Low voc
-
4020 ESD Neutralizer Cleaner Concentrate
- Economical concentrate
- Dilute 1:128 cleaner to water
- Neutral pH 7.2
- Low foam - no streaking formula
- Non-toxic and biodegradable safe for sewage & septic systems
-
4010 Acrylic ESD Floor Stripper Concentrate
- Prepares floor for application of acrylic based ESD floor finishes
- No ammonia or phosphates
- Effective in hard or soft water
- Low 6% V.O.C.
- Zero tribogeneration
-
GroundWorx Basics (SF) ESD Static Conductive Epoxy Floor Coating | Water Based | ANSI/ESD S20.20-2014
- Water - based epoxy, matte finish
- Conductive range 2.5 x 104 - 3.5 x 107 ohms
- System Resistance (w/ ESD Footware) < 3.5 x 107 (fully compliant) ANSI/ESD STM 97.1
- Great low cost solution for concrete, wood, VCT Tile floors
- Extended working time - POT life 40+ minutes
-
4030 ESD Neutralizer Cleaner Ready-to-Use
- Ready-to-use (also available as a concentrate, see 4020)
- Neutral pH 7.2
- Low foam - no streaking formula
- Non-toxic and biodegradable safe for sewage & septic systems
- Non-abrasive
-
ScrubWorx 20.20 ESD Floor Cleaner Concentrate
- Static Conductive
- High Activity Cleaner
- Micro-Cleans & Conditions
- Chemically Seals Tiles
- Simple to Use
-
4600 Ultra Static Dissipative Clear Urethane Floor Finish
- High performance with exceptional static control
- For Use on vinyl, linoleum, or ceramic tile
- Offers high gloss, slip resistant & abrasion resistant finish
- More economical than other leading ESD floor finishes
- Resists powdering or flaking, even in dry condidtions
-
1007 Polyurea Coating Fast Set Waterproof Elastomeric Spray | Flexible 600%+ Elongation | 10-30 Second Set Time | 100% Solids
- Excellent elongation – 600%+
- Protects wide variety surfaces - concrete, metal, wood etc
- Chemical Resistant
- High Impact & Abrasion Resistance
- Application temperature range 20°F to 200°F
-
5500 Polyaspartic Polyurea Coating Roll Down Low Temp 30°F | 87% Solid
- Beautiful Clear Appearance
- Quick recoat time in as little as 1 – 1.5 hours
- Waterproofing Elastomeric Systems
- Good In Submerged Service Projects Like Fountains
- Works well on concrete, brick, steel, wood, fiberglass
-
6009 Epoxy Floor Coating Industrial & Commercial Low Temp 35°F | 100%
- Protective and attractive color coat epoxy flooring system
- Designed to seal floors against abrasion, water, oils and chemicals
- Good Color stability
- Wide application temperature range 35°F to 125°F (1.7°C to 52°C)
- Quick re-coat time 4-5 hours (at 75°F)
-
7001 Polyurethane Primer Concrete & Steel | Quick Cure | Exceptional Adhesion | Low 35F Temp
- Concrete & Steel Primer For Epoxy, Urethane, Polyaspartic, Polyurea Coatings
- Cross-links With Polyurea, EPDM Roofing and other Plastic Materials Difficult to Bond to
- Deep Penetrating Exceptional 1200 psi Adhesion
- Superior Corrosion, Abrasion and Water Resistance
- For Use in Submerged Service Applications
-
6007 Wet Condition Epoxy For Concrete & Steel | Low Temp 35°F | 100% Solids
- May be applied in damp and wet conditions where wash-down of areas is problematic
- Withstands up to 15-18 psi hydraulic vapor pressure
- Provides protective attractive color coat epoxy flooring system
- Excellent working properties
- Exceptional corrosion protection of both concrete and steel
-
4000 Acrylic Static Dissipative Clear Floor Finish
- Coverage is approximately 1500 – 2000 sq. ft. per gallon
- V.O.C. is less than 4%
- Solids are 20%± 5%
- UL listed for slip resistance
- Compliant to ANSI/ESD S20.20
-
Anti-Graffiti UV Glass Window Film | 25′ to 100′ Roll | 4 & 6 mil | 36″ to 72″ Wide | Protect Against Paint | Razor Blade | Acid
- Maximum Protection With a Tough Invisible Film For Glass Windows, Glass Doors & Glass Mirrors
- Wipe-clean coating allows quick removal of most graffiti paint attacks
- Superior Strength Film Prevents Damage from Razor Blade and Acid Attack
- Hassle Free & Quick-release adhesive for speedier film removal and replacement
- Innovative Technology for Completely Clean Removal with NO REMAINING RESIDUE
-
E1016 Anti-Slip Epoxy Concrete Floor Coating – 3 Gal Kit | 20 Colors | Tennis Court Like Surface
- Adds a slip resistant finish to concrete floors
- Good for use on surfaces subject to bare foot traffic
- Long 1 - 1.5 hour pot life
- Excellent adhesion
- Good chemical and abrasion resistance
-
E5015 Epoxy Primer WB Coating | Concrete Wood Masonry | 20 Colors
- Versatile product good on concrete, masonry, wood surfaces
- Available in Clear and 20 Colors To Match With Topcoat
- Excellent as primer for epoxy, polyaspartic and urethane coating systems
- Helps prevent concrete outgassing problems when used as primer
- Long 1 - 1.5 hour pot life
-
E5030CL Urethane Clear Sealer / Topcoat WB
- Attractive, clear aliphatic non yellowing finish
- Versatile product good on concrete and masonry surfaces
- Recoat only 1-2 hours & light foot traffic 2-4 hours
- Extended 24 hour pot life
- Excellent abrasion resistance (Taber Abrasor test only 10 mg loss)
-
Aspartic 85 Polyaspartic Quick Cure Concrete Floor Coating | Low Temp 30°F
- Tough, durable topcoat for interior epoxy floor coatings
- Cold temperature application down to 30°F
- Excellent chemical and abrasion resistance
- UV Stable and will not yellow
- Beautiful high gloss appearance
-
ACL 395 Electrostatic Surface Resistivity ESD Test Meter | Compact Easy to Use
- Four color LED display segments (including warning stage)
- Half decades for greater accuracy
- Rubber rails for increased accuracy, durability and lower maintenance
- Dimensions: 2.8" x 5.1" x 1.4"
- Conforms to ASTM D257
-
Aspartic 100 High Build Polyaspartic for Concrete Floors | Low Temp 30°F | 100% Solids
- Tough, durable topcoat for interior epoxy floor coatings Very low to no odor great for sensitive odor indoor projects Can be used as high build topcoat up to 16 mils or 100 sq'/gallon Cold temperature application down to 30°F Excellent chemical and abrasion resistance UV Stable and will not yellow Beautiful high gloss appearance Designed for high traffic and industrial areas 100% Solids Performance Available in clear & 14 colors!
-
Aspartic 85 Slow Set Polyaspartic Concrete Floor Coating | Low Temp 30°F | Low Odor Option
- Tough, durable topcoat for interior epoxy floor coatings
- Cold weather application down to 30°F
- Excellent chemical and abrasion resistance
- UV Stable and will not yellow
- Beautiful high gloss appearance
-
HyperREZ UV Epoxy Concrete Floor Coating | 45 min Work time | 100% Solids | Ultra Clear Great for Metallics | Low Temp 40°F
- Tough, durable epoxy floor coating Cold temperature application down to 40F Good chemical and abrasion resistance High Build Applications up to 32 mils/coat (50 sq'/gal) UV Resistant Beautiful high gloss appearance Designed for high traffic and industrial areas High solids 100% Withstands up to 9 lbs. of hydrostatic pressure Available in clear & 12 colors! (Pigment sold separately)
-
HyperFLEX Epoxy | Flexible Membrane Concrete Wood Steel | 150% Elongation | Low Temp 40°F | Quick Cure | 100% Solids
- Tough, Durable Epoxy Coating and Flexible Membrane
- Very Flexible with Elongation rating 150% @ASTM D-638
- Great for Quick Crack Repair and Control Joint Filler (when mixed with Fumed Silica)
- Can be used as a (1) basecoat for full broadcast floors, (2) flexible membrane, (3) repair gel to fill joints, cracks, & divots
- Superior Flexibility and Outstanding Bonding
-
HyperBOND Epoxy | Wet Condition Moisture Tolerant | Concrete Floor Coating | Low Temp 40F | 100% Solids
- Tough, Durable Epoxy Coating
- Outstanding Bonding
- Water Insensitive and Can Be Applied In Wet Conditions
- Withstands up to 9 lbs. of hydrostatic pressure
- Cold temperature application down to 40F
-
H20 ZioTHANE Semi-Gloss Urethane Concrete Floor Sealer/Topcoat
- Tough, durable topcoat for epoxy floor coatings
- Excellent chemical and abrasion resistance
- Exceptional impact resistance
- Aliphatic, UV Stable and will not yellow
- Beautiful clear, semi-gloss appearance
-
H20 zioTHANE Low Gloss Urethane Concrete Floor Sealer / Topcoat
- Tough, durable topcoat for epoxy floor coatings
- Excellent chemical and abrasion resistance
- Exceptional impact resistance
- Aliphatic, UV Stable and will not yellow
- Beautiful clear, low gloss appearance
-
E322HW High-Gloss Aliphatic Urethane Abrasion & Chemical Resistant Low
- Outstanding durability with impact resistance of 160 in lb (Gardner Impact test)
- Excellent abrasion resistance Only 22 mg loss (Tabor Abrasion test) Reduced to 10 mg loss using our High Wear 325 additive
- Cold temperature application down to 45F
- Excellent Chemical Resistance
- Aliphatic, UV Stable and will not yellow
-
UW601 Underwater Concrete Crack Filler Epoxy Paste Repair
- Make Repairs Underwater or on Wet Surfaces
- Concrete and Masonry
- Both Horizontal & Vertical Repairs
- Good for Cracks up to 1/8" and Thin Build Repairs
- 100% solids with 0 voc
-
UW602 Underwater Pourable Concrete Crack Filler Epoxy Repair
- Make Repairs Underwater or on Wet Surfaces
- Concrete, Cement and Masonry
- Both Horizontal & Vertical Repairs
- Good for Cracks and Wide Variety of Repairs
- Easy to Use Pourable Formula
-
NE253 Novolac Colored Epoxy Acid Solvent Chemical Resistant High Build
- Outstanding Spill and Splash Acid, Solvent, Chemical surface protection
- Resists wide range of chemicals, solvents and acids
- Resistant to high concentrations of acids and even some chlorinated solvents
- High build for heavy duty traffic projects, chemical troughs and curbs
- Great for tanks and chemical spill areas for cement, masonry or brick
-
NE253SL Novolac Epoxy Colored Slurry Acid Chemical Resistant Floor Coating
- Outstanding Spill and Splash Acid, Solvent, Chemical surface protection
- Resists wide range of chemicals, solvents and acids
- Resistant to high concentrations of acids and even some chlorinated solvents
- Applied at 1/16" thick for resurfacing traffic and chemical spill areas
- Excellent adhesion 425 psi
-
NE257P Novolac Epoxy Colored Primer Acid Solvent Chemical Resistant Fl
- Excellent primer companion to our NE253 and NE253SL Novolac Epoxy topcoats
- Outstanding Spill and Splash Acid, Solvent, Chemical surface protection
- Resists wide range of chemicals, solvents and acids
- Excellent adhesion 375 psi
- Long working time with 1 to 3 hour POT life
-
NE255P Novolac Epoxy Primer/Sealer Flexible Crack Bridging Chemical Resistant
- Excellent crack bridging, flexible high build primer eliminates need to repair hairline cracks in chemical exposure areas
- Use for priming light to medium duty secondary containment
- Tough, durable coating for surfaces exposed to vehicle traffic
- Outstanding abrasion and impact resistance with only 5 mg loss Taber Abrasion test and 100 inch lbs Gardner Impact Test
- Excellent adhesion 450 psi
-
NE256 Novolac Clear Epoxy Acid Solvent Chemical Resistant Floor Coating
- Outstanding Spill and Splash Acid, Solvent, Chemical surface protection
- Exceptional resistance to wide range of chemicals, solvents and acids
- Medium to High build for chemical spill areas, troughs, curbs and tanks
- Use as coating or chip/flake or aggregate systems
- Excellent adhesion 400 psi
-
NE258P Novolac Epoxy Clear Primer Acid Solvent Chemical Resistant Floor Coating
- Excellent primer companion to our NE256 Novolac Clear Epoxy topcoat
- Helps reduce air release generation when applying higher solids novolac topcoats
- Outstanding Spill and Splash Acid, Solvent, Chemical surface protection
- Resists wide range of chemicals, solvents and acids
- Excellent adhesion 365 psi
-
6700 Premium ESD Static Dissipative Anti-Static Floor Paint | 9 Colors | ANSI/ESD S20.20-2014
- Static dissipative 10e7 - 10e9 ohms
- Conforms to ANSI/ESD S20.20-2014 when tested according to ANSI/ESD STM7.1
- No hot spots
- Excellent adhesion and color retention
- Good resistance to abrasion, oils and washing
-
Pigment to Color 5500 Polyaspartic | 17 colors
Starting at $59.00 -
NE253V Novolac Vertical Wall Colored Epoxy Chemical Resistant Acid Sol
- Outstanding Spill and Splash Acid, Solvent, Chemical surface protection
- Resists wide range of chemicals, solvents and acids
- Medium build topcoat for chemical areas, walls, troughs and curbs
- Great for tanks and chemical spill areas for cement, masonry or brick
- Excellent adhesion 425 psi
-
E5520 Low Gloss Urethane Water Base Abrasion & Chemical Resistant
- Outstanding durability with impact resistance of 160 in lb (Gardner Impact test)
- Excellent abrasion resistance Only 23 mg loss (Tabor Abrasion test) Reduced to as low as 10 mg loss using our High Wear 325 additive
- Excellent Chemical Resistance
- Aliphatic, UV Stable and will not yellow
- Great for Indoor Concrete Floor Projects
-
Cool Coat White Thermal Barrier Heat Reflective Insulating Wall Paint | Elastomeric | Cools Surface
- Reflects Infrared Radiation Using Advanced Ceramic Sphere Technology
- Ready-to-Use White Color - Flat Finish
- Lower Cooling Costs in Summer When Applied to Exterior Walls & Roofs
- Use to cool metal surfaces like handrails in the hot summer sun
- Lower Heating Costs in Winter When Applied to Interior Walls
-
Cool Coat Tint Base Thermal Barrier Heat Reflective Insulating Paint (Custom Colors) | Elastomeric | Cools Surface
- Reflects Infrared Radiation Using Advanced Ceramic Sphere Technology
- Custom Color Locally Using One of Our 3 Tint Bases
- Create most colors with our Pastel, Deep and Accent Tint Base options
- Lower Cooling Costs in Summer When Applied to Exterior Walls & Roofs
- Use to cool metal surfaces like handrails in the hot summer sun
-
Cool Coat Clear Thermal Barrier Heat Reflective Insulating Wall Paint | Elastomeric | Cools The Surface
- Clear protection - allows underlying surface color to be seen (it "can" be slightly hazy over dark accent colors only)
- Reflects Infrared Radiation Using Advanced Ceramic Sphere Technology
- Lower Cooling Costs in the Summer When Applied to Exterior Walls & Roofs
- Cool painted metal surfaces like metal handrails from the hot summer sun
- Lower Heating Costs in Winter When Applied to Interior Walls
-
E707HB High Build 100% Solids Epoxy Floor Coating | 20 Colors
- High Build - 100% Solids Commercial Epoxy
- Long POT Life (working time) 30-50 min
- Excellent Adhesion 450 psi
- Abrasion resistant Only 32 mg loss (Tabor test)
- Good Chemical Resistance
-
E707LVP High Solids Epoxy Primer & Base Coat | Helps Prevent Outgassin
- High Solids Commercial Grade Epoxy Primer
- Helps reduce problems from concrete outgassing (air bubbles)
- Long POT Life (working time) 35-55 min
- Excellent Adhesion 430 psi
- Good Chemical Resistance
-
E100 Urethane Primer Finish Coat | Aluminum Galvanized & Rusty Steel | Dry Heat to 400 °F | Apply Down to18°F | Quick Cure
- Prime over Steel, metal, weathered galvanized steel, aluminum, fiberglass, polyurethane foam and previously painted surfaces
- Fast recoat 1-2 hours at 75°F & 50% R.H
- Cures down to 18°F dry and apply to 140°F
- High heat resistance up to 400°F dry
- Single component, easy to use
-
E650 Non-Skid Epoxy Floor & Deck Low Temp 25°F | OSHA ADA Navy Spec Mil-PRF-24667B Type 1 | 4 Colors | Zero VOC Option
- Heavy duty non-skid resistance for concrete & steel surfaces
- Designed for wet areas
- Meets ADA and OSHA requirements for safe co-efficient of friction when properly applied
- Meets Navy Military Specification Mil-PRF-24667B for Non-Skid Deck Coating
- Excellent adhesion, abrasion and impact resistance
-
E591 / E590 Wet Surface Epoxy | Apply Underwater | Cures to 35°F | Concrete – Steel | Floors – Walls
- May be applied on wet or under water surfaces
- Self-priming on steel and on most concrete applications
- Cold temperature cure down to 35F
- Ideal for marginally prepared and painted surfaces
- Outstanding impact and abrasion
-
GroundWorx Ultra (HB-97.2) ESD Static Conductive Epoxy Basecoat 100% Solids | Forklift Traffic | ANSI/ESD S20.20-2014
- Static dissipative or conductive high build epoxy electrical protection when used with the GroundWorx Ultra ESD Urethane Topcoat, which comes in either dissipative >1.0 x 10e6 ohms or conductive <1.0 x 10e6 ohms electrical resistance, limiting Static Charge Generation to <15 volts
- Great for high traffic, high wear commercial & industrial applications as high build 14 mil ESD system at <$4.00/sq' material cost
- Great for high traffic, high wear commercial & industrial applications
- Use on Concrete, Wood and old VCT surfaces
- Moisture tolerant primer
-
GroundWorx Ultra (HB-97.2) ESD Urethane Top Coat | Static Dissipative or Conductive | ANSI S20.20-2014
- Optional Static conductive <1.0 x 10e6 ohms or Dissipative >1.0 x 10e6 and <1.0 x 10e9 ohms high performance electrical protection, limiting Static Charge Generation to <15 volts
- Great for high traffic (forklift & pallet jack), high wear commercial & industrial applications with high build 14 mil system
- Conforms to ESDA, ANSI standard S20.20-2014 when used with the GroundWorx Ultra ESD Epoxy Primer
- Use on Concrete, Wood and old VCT surfaces
- Tough surface: impact resistance 140 psi and tabor abrasion test 25 mg loss