...

Call Or Text
(630) 675-4509

Sign Up / Login
0 $0.00

Call Or Text
(630) 675-4509

e25551 quick set epoxy repair & rebuild

25551 Quick-Set Epoxy Repair & Rebuild

Starting at $45.00

  • Helps return equipment to service quickly
  • Moisture-insensitive formula
  • Self-priming on properly prepared steel and concrete
  • 1:1 mix ratio by volume
  • Excellent resistance to water, alkalis and abrasion
Calculate Square Footage

Overview

  • Description
  • Additional Information
  • Specs
  • Application
  • Calculator
  • More Options

25551 Quick-Set Epoxy Repair & Rebuild

25551 Quick-Set is a two-component, 100% solids, solvent-free epoxy Novolac adhesive for emergency repairs, rebuilding, and bonding. Its moisture-insensitive formula is designed for use on metal, glass, concrete, and wood, including bonding dissimilar metals. The material mixes at a simple 1:1 ratio by volume and can be applied vertically or overhead at thicknesses up to ½ inch.

25551 Quick-Set cures in 10–15 minutes and can be returned to service within one hour. As an epoxy Novolac, it offers excellent resistance to water, alkalis, and abrasion, along with very good resistance to inorganic acids and organic solvents. It is suitable for repairs to pipes, tanks, pumps, and similar equipment that contain liquids or gases.

Comes in packaging sizes including Touch Up Kit, Maintenance Kit, 0.5 gallon kit, 1 gallon kit, 1.5 gallon kit, 4.5 gallon kit and 15 gallon kit.

 

Where is 25551 Quick-Set Epoxy Repair & Rebuild typically used?

  • Emergency repair or rebuilding applications on pipes, tanks, pumps and similar equipment
  • Bonding dissimilar metals or other compatible materials
  • Repairing or bonding metal, glass, concrete and wood
  • Vertical or overhead applications up to ½ inch thick

Why 25551 Quick-Set Epoxy Repair & Rebuild?

  • Helps return equipment to service quickly
  • Moisture-insensitive formula
  • Self-priming on properly prepared steel and concrete
  • 1:1 mix ratio by volume
  • Excellent resistance to water, alkalis and abrasion
  • Very good resistance to inorganic acids and organic solvents
  • Heat resistance up to 200°F in immersion service and 450°F in dry service

 

SPECIFICATIONS
Temperature Immersion Service

Max. 200ºF (93ºC)

Dry to 450ºF (232ºC)
Solids by Volume 100% 
Viscosity Paste
Pot Life 5 Min @ 72F
Mix Ratio 1:1 by Volume (Base: Activator) 100gm: 118 gm by weight
Color Dark Gray
Shelf Life 5 Years at 55-95F (13-35C)
Coverage @20 mils: 80sf/gal
Weight Per Gallon 13.5 lbs (6.1 KG)
Flexibility: Good. Very Good with Polyester or Fiberglass Mat; 1.5oz/ft2 (.5 KG/M2)
Film Thickness Up to 500 mils / coat
Abrasion Excellent
Applications: Repair burst pipes, tanks, pumps and the like which contain liquids or gases. Use for bonding Dissimilar Metals. Use for Concrete, Metal, Glass, Wood.
Chemical Resistance Water: Excellent

Alkalies: Excellent

Inorganic Acids: Very Good

Organic Acids: Good

Organic Solvents: Very Good

Product Use Instructions 

SURFACE PREPARATION

Steel surfaces are to be abrasive blasted with chloride free abrasive. Exterior applications to SSPC SP-10 Near White metal finish. Immersion applications to SSPC SP-5 White metal. Grind flat all burrs, weld seams, radius sharp edges.
25551 is self-priming.

Concrete surfaces: Concrete surfaces should be degreased if oil and grease contamination is present. Degreased surface shall be high pressure washed, acid etched and high pressure washed again so surface is clean and free of all grease, oils and surface laitance. Existing coatings should be abrasive blasted to clean concrete. ARCOR® 25551 is self-priming.

MIXING

Thoroughly mix Activator into Base with mixing stick or drill with low-speed mixing blade. Mix by Volume 1 parts Base to 1 part Activator. Or by weight 100 grams base to 118 grams activator

THINNING: Never Thin

APPLICATION 

Squeegee/Stick/Brush: medium to stiff bristle of sufficient quality that bristles do not pull out and stick in coating (epoxy glued bristles are best). Trim or tape to <1/2” nap.
Roller: N/A
Cartridge Sprayer: N/A.
Plural Spray: N/A
Airless Spray: N/A
Conventional Spray: N/A

APPLICATION TEMPERATURE 

Material: Keep between 55 to 95ºF (13 to 35ºC). Substrate: Keep between 45 to 105ºF (7 to 40ºC). The difference in temperature of the substrate and the coating should never exceed 10ºF (5ºC). Substrate shall be a minimum of 5º(3ºC) above dew point. Do not apply if relative humidity exceeds 90%. If necessary, heat metal prior to surface preparation using electric heater or heat lamp. Never use gas, oil or kerosene heaters as they will leave a greasy residue on metal surface. For best results keep all material in warm area overnight (70ºF+, 21ºC) for ease of mixing. If necessary, Base component of material can be heated by microwave for 30 seconds for a 1 KG Base unit or by warm water bath Heat activator by warm water bath only. Note: warm material has shorter pot-life

OVERCOAT / CURE TIME 

Overcoat windows are affected by temperature and humidity. The following are general guidelines.
Recoat between 30min and 2 hours at 72ºF (25ºC).
For highly aggressive environments Force Cure is recommended; 4hours at 120ºF (49ºC), 2 hours at 150ºF (66ºC).

CLEAN UP: M.E.K., Acetone or another Ketone blend. For solvent controlled areas use 98% isopropyl alcohol

WARNING: Base contains epoxy resin. Activator contains alkaline amines, a strong sensitizer. May cause skin irritation, sensitization or other allergic responses. Use with
good ventilation, particularly if heated or sprayed. Prevent all contact with skin or eyes. Wear protective clothing, goggles, gloves or barrier creams. Keep containers closed
when not in use. Wash thoroughly after handling. In case of skin contact immediately wash with soap and water. In case of eye contact, flush with water for 15 minutes. If irritation persists seek medical attention.

Manufacturer makes no warranty either expressed or implied including warranties of merchantability or fitness for a particular purpose for this product. Under no circumstances will the manufacturer be liable for incidental, consequential or other damages, breach of warranty, strict liability, or any other theory arising out of use of this product. ARCOR® epoxy products do not provide structural integrity or improvement. They are only used to provide protection from corrosion, wear, abrasion and chemical attack on a given substrate and only to the extent provided for in the Data Sheets, Technical Data Sheets, Safety Data Sheets and any other information as supplied in writing directly from manufacturers technical support. The information and recommendations contained herein are based on standard Product and are proprietary and furnished solely for the use of our customers. This information is provided in good faith and believed to be true and accurate as of the date/version of this document. As the manufacturer has no control over the use conditions or application process of the parties using this product,

the manufacturer cannot accept responsibility for loss, injury or other damages resulting from the use of the Product or this or any other information provided by the manufacturer. Therefore, no guarantees of any kind, expressed or implied, are made by the manufacturer, Novolac Epoxy Technologies Inc., regarding this, or any, product manufactured by them or any contracted or licensed manufacturer.

Manufacturer, Novolac Epoxy Technologies Inc., makes no warranty either expressed or implied including warranties of merchantability or fitness for a particular purpose for this product. Under no circumstances will the manufacturer be liable for incidental, consequential or other damages, breach of warranty, strict liability, or any other theory arising out of use of this product. The information and or recommendations contained herein are based on standard Product and are proprietary and furnished solely for the use of our customers. This information is provided in good faith and believed to be true and accurate as of the date/version of this document. As the manufacturer has no control over the use conditions or application process of the parties using this product, the manufacturer cannot accept responsibility for loss, injury or other damages resulting from the use of the Product or this or any other information provided by the manufacturer. Therefore, no guarantees of any kind, expressed or implied, are made by the manufacturer, Novolac Epoxy Technologies Inc., regarding this, or any, product manufactured by them or any contracted or licensed manufacturer. ARCOR® epoxy products do not provide structural integrity or improvement. They are only used to provide protection from corrosion, wear, abrasion and chemical attack on a given substrate and only to the extent provided for in the Data Sheets, Technical Data Sheets, Safety Data Sheets and any other information as supplied in writing directly from manufacturers technical support.

Joint Fill Calculator

Estimate the Right Amount for Your Project

Use the calculator to determine your total project square footage. Once you have your measurements, compare the result to the product coverage rate listed on this page to estimate how much material you'll need for complete coverage.

Calculate Coverage
Quickly determine the total square footage of your project area.

Estimate Product Quantity
Use your results to calculate how much product your project requires.

Plan With Confidence
Add a waste percentage to account for joint size variations and waste factor in using cartridge kits

Coverage estimates are provided as a general guide. Actual product usage may vary based on surface condition, porosity, application method, and project requirements.

10–15% recommended
Bulk Material Required 0.0 gallons
21 oz Cartridges Required 0.0

Recommended Tools

You may also like…