Steel
Showing 1–8 of 79 results
-
1007 Polyurea Coating Fast Set Waterproof Elastomeric Spray | Flexible 600%+ Elongation | 10-30 Second Set Time | 100% Solids
- Excellent elongation – 600%+
- Protects wide variety surfaces - concrete, metal, wood etc
- Chemical Resistant
- High Impact & Abrasion Resistance
- Application temperature range 20°F to 200°F
-
4″ x 18″ Pebble Bond Hand Trowel | Professional River Rock Finishing Tool
- Professional 4" x 18" steel finishing blade
- Comfortable wooden handle for improved grip and control
- Ideal for Pebble Bond epoxy and river rock installations
- Helps create a smooth, consistent stone finish
- Recommended for use with Pebble Bond Trowel Slick
-
4G Surface Guard: Walls & Floors | Advanced Protection | Easy Application | Fast Drying
- Advanced Protection: Safeguard surfaces against water and oil with hydrophobic and oleophobic properties.
- Easy Application: Apply effortlessly using a brush, roller, airless sprayer, or pump sprayer.
- Fast Drying: Achieve quick results with a fast drying time.
- Invisible Finish: Maintain the natural appearance of surfaces without altering their friction or slip resistance.
- Environmentally Friendly: Water-based formula with no solvents or VOCs, ensuring no unpleasant odors.
-
6007 Wet Condition Epoxy For Concrete & Steel | Low Temp 35°F | 100% Solids
- May be applied in damp and wet conditions where wash-down of areas is problematic
- Withstands up to 15-18 psi hydraulic vapor pressure
- Provides protective attractive color coat epoxy flooring system
- Excellent working properties
- Exceptional corrosion protection of both concrete and steel
-
6009 Epoxy Floor Coating Industrial & Commercial Low Temp 35°F | 100%
- Protective and attractive color coat epoxy flooring system
- Designed to seal floors against abrasion, water, oils and chemicals
- Good Color stability
- Wide application temperature range 35°F to 125°F (1.7°C to 52°C)
- Quick re-coat time 4-5 hours (at 75°F)
-
7001 Polyurethane Primer Concrete & Steel | Quick Cure | Exceptional Adhesion | Low 35F Temp
- Concrete & Steel Primer For Epoxy, Urethane, Polyaspartic, Polyurea Coatings
- Cross-links With Polyurea, EPDM Roofing and other Plastic Materials Difficult to Bond to
- Deep Penetrating Exceptional 1200 psi Adhesion
- Superior Corrosion, Abrasion and Water Resistance
- For Use in Submerged Service Applications
-
800 Slow Set Polyurea Adhesive Sealant & Caulk
- Back in-service 1 - 1.5 hours, recoat 30-45 minutes, full cure 6-8 hours
- High chemical & fuel resistance
- Highly adhesive to many substrates
- Good working time, quick gel time 6-10 minutes, trowel-able
- Cartridge or pump dispensed
-
ABC Primer 914 | Quick Cure Epoxy Primer | 30-Minute Recoat
- 30-Minute Quick Cure – Cures quickly to allow overcoating in approximately 30 minutes, helping reduce project downtime.
- Excellent Adhesion – Creates a tacky bonding surface that improves adhesion for FRP systems and non-self-priming coatings.
- Low-Viscosity Formula – Applies smoothly by brush or roller for fast, uniform coverage.
- Solvent-Free Epoxy – 100% solids, VOC-free epoxy formulation designed for industrial repair and maintenance applications.
- Improves Composite Bond Strength – Promotes a strong bond between the substrate and fiberglass reinforced plastic (FRP) composite systems.