Tools, Supplies, Etc.
Filter By Category
Questions about our products?
Call us for help picking the correct solution for your project. (630) 675-4509
Showing 1–50 of 90 results
-
Static Mixer 1/2″ x 32 Element | For Epoxy & Polyurea Dual Cartridge Kits | US Saws Polymer Pump
Starting at $80.00 -
Polybead Anti-Slip Additive | Least Change Appearance | Easy to Clean & Use | 2 Grit Sizes
- Adds skid resistance & texture profile to a surface
- Least Change in Surface Appearance & Easiest to Clean
- Very small amounts required
- Use with Epoxy, Polyaspartic, Urethane, Polyurethane and most coatings
- Lightweight aggregate, blends well into coating
-
Aluminum Oxide Anti-Slip | WHITE | 4 Grit Sizes | Non-Skid Tough Durab
- Adds very tough skid resistance & texture profile to a surface
- Works well with high performance 2 part floor coatings
- Does not change physical properties of the coating
- Well bonded into the body of the coating
- Long lasting for extended anti-slip performance
-
SX20552 US SAWS Dual Component 1 Man Polyurea / Epoxy Joint Filler Pump
- Reduced Labor Costs with newly redesigned, low profile one man operation
- Significantly Increase application Speed on Large Concrete Floor Projects
- Allows Quick Joint Filling vs Cartridge Application
- Fill up to 5,000 Lineal Feet of joints (new concrete) in one day!
- Left and right handed operation are easy with the double-sided “T” handle
-
SX20150 US SAWS Dual Component 2 Man Polyurea / Epoxy Joint Filler Pump
- Reduce Labor Costs & Significantly Increase Application Speed on Concrete Floor Projects
- Reduce Material Waste With More Controlled Material Flow
- The dispensing wand has a variable speed control, and start/stop control
- Production rates to 5,000 lineal joint filling feet per day (new concrete)
- Allows Quick Joint Filling vs Cartridge Application
-
Newborn 435-XSP Dual Component Cartridge Gun 300ml x 300ml | 300 ml x 150 ml
- Dual-Component Applicator For 10.5 Oz / 300ml Twin Cartridges In 1:1 Or 2:1 Mix Ratio 300 ml x 150 ml
- Quick Application Of Polyurea, Epoxy, Urethane Based Products
- Easy Application Of Our’ Twin Cartridge Polyurea Products 3246, 3004, 4034, 830, E5830
- Thrust Ratio Of 26:1 For Use With Very High Viscosity Materials
- Two-piece stamped steel friction plate
-
Newborn 535-XSP Professional Dual Component Cartridge Gun 300ml, 150ml, 75ml
- Dual-Component Gun 10 oz/300ml Cartridge 1:1 ratio
- Multi-Ratio Easily Converts in just seconds with Snap In/Snap Out Push Disks for 300ml, 150ml 75 ml cartridges
- Quickly Apply Polyurea, Epoxy, Urethane Products
- Easy Application Of Twin Cartridge Polyurea's 3246, 3004, 4034, 830 made by ASTC Polymers
- Thrust Ratio 26:1 For Very High Viscosity Materials
-
Newborn 830A30 Pnuematic Dual Component Cartridge Gun 300ml, 150ml, 75ml
- Dual-Component Pneumatic Gun 10.5 oz/300ml Cartridges 1:1 ratio
- 2.5" cylinder generates 490 lbs nominal thrust at @100 psi
- Offers quick application with smooth, even product flow
- Multi-Ratio Easily Converts in just seconds with Snap In/Snap Out Push Disks for 300ml, 150ml 75 ml cartridges
- Quickly Apply Polyurea, Epoxy, Urethane Products
-
Newborn 850A30 HD Pnuematic Dual Component Cartridge Gun 300ml, 150ml, 75ml
- Dual-Component Pneumatic Gun 10 oz/300ml Cartridges 1:1 ratio
- Powerful 4" cylinder generates nominal 1,100 lbs thrust @100 psi
- Offers quick application with smooth, even product flow
- Multi-Ratio Easily Converts in just seconds with Snap In/Snap Out Push Disks for 300ml, 150ml 75 ml cartridges
- Quickly Apply Polyurea, Epoxy, Urethane Products
-
ACL 395 Electrostatic Surface Resistivity ESD Test Meter | Compact Easy to Use
- Four color LED display segments (including warning stage)
- Half decades for greater accuracy
- Rubber rails for increased accuracy, durability and lower maintenance
- Dimensions: 2.8" x 5.1" x 1.4"
- Conforms to ASTM D257
-
Silica Sand Anti-Slip Additive For Epoxy, Polyaspartic, Polyurethane,
- Adds very tough skid resistance & texture profile to a surface
- Works well with high performance 2 part floor coatings
- Does not change physical properties of the coating
- Well bonded into the body of the coating
- Comes in 5 mesh sizes
-
Spike Shoes | Walk on Wet Epoxy, Polyaspartic, Urethane Floor Coatings
Starting at $45.99 -
24″ Notched Floor Squeegee 3/16″ Deep For Epoxy & Polyaspartic Coatings
- 24" Speed Squeegee, 3/16" notch, Threaded Handle Adapter
- For Quicker and Easier Application of thicker mil (thickness) floor coating systems
- A floor coating standard, just grab it,use it, and toss it or clean it
- This one has our own special twist, a threaded handle adapter
- Features an aluminum frame with a red rubber solvent resistant blade
-
9″ Wooster Pro Doo Z Roller Cover For Epoxy, Urethane, Polyaspartic Coatings | 12/box | 2 Sizes
- Shed resistant woven fabric for a virtually lint free finish with all paints, enamels, primers, urethanes, and epoxies.
- Available in 3/8" and 3/4" thick nap roller covers
- Exclusive golden pinstripe design stays resilient, resists matting.
- Green double thick polypropylene core resists water, solvents, and cracking.
- Sold in Boxes of 12 Sleeves
-
18″ Wooster Pro Doo Z Cover For Epoxy, Urethane, Polyaspartic Coatings | 6/Box | 2 Sizes
- Shed resistant woven fabric for a virtually lint free finish with all paints, enamels, primers, urethanes, and epoxies.
- Available in 3/8" and 3/4" thick nap roller covers
- Exclusive golden pinstripe design stays resilient, resists matting.
- Green double thick polypropylene core resists water, solvents, and cracking.
- Sold in Boxes of 6 Sleeves
-
9″ Wooster Roller Frame For Epoxy, Urethane, Polyaspartic Coatings
- 9" Acme Heavy Duty Roll Frame
- Sturdy 5 Wire Cage Plastic Endcaps
- Chrome Plated 5/16" Shank
- Plastic Threaded Grip For Extension Pole Use
- Sturdy 5 wire cage and plastic endcaps
-
18″ Wooster Big Ben Roller Frame For Quick Application of Floor Coatings
- 18" Big Ben Roll Frame
- For 18" Roller Covers, 1-1/2" Standard Or 2-1/4" Jumbo Diameter
- Lightweight Yet Strong Polypropylene Construction
- Quickly Install Or Remove The Roller Cover
- For 18 Inch roller covers with 1 1/2 Inch standard or 2 1/4 Inch jumbo Diameter and can be used with all nap heights
-
18″ Wooster Sherlock Wide Boy Frame For Quick Application Epoxy, Urethane, Polyaspartic Coatings
- Sherlock Wide Boy Frame
- Holds Roller Covers 12" To 18" Long With 1-1/2" Standard Or 2-1/4" Jumbo Diameter
- Extra Strength Steel Wing Nut Design
- Rigid Tubular Steel Frame Arms
- Adjusts to hold roller covers 12 Inch to 18 Inch long with 1 1/2 Inch standard or 2 1/4 Inch jumbo Diameter and can be used with all nap heights
-
Jiffy Mixer for Epoxy, Polyaspartic, Urethane & High Viscosity Liquids | Stainless | Minimize Air
- Properly Mix High Viscosity Liquids (not just stir)
- Required Tool for Mixing Epoxy, Urethane, Polyaspartic Coatings
- Mix Foams, Glues, Mortars, Paints, Resins, Cement, Chemicals
- Heavy Duty Construction For Industrial/Commercial Projects
- Made of 304 polished stainless steel,
-
5 Quart Measuring Bucket For Epoxy, Polyaspartic, Urethane Coatings | Box of 10
- 5 quart size for smaller projects
- semi-transparent tub with visible quart and liter calibrations for easy mixing/measuring
- Solvent resistant, reusable and recyclable
- Sold in bundles of 10
- Also available with matching snap-on plastic lids
-
14” Heavy Duty Floor Scraper For Flake Removal and Stubborn Substances
- All steel construction, painted to prevent rusting
- 5' tubular steel handle
- Powder coated handle
- Removes wide variety of stubborn substances from floor
- Great for removing excess chips and flakes from basecoat prior to topcoat application on floor coating project
-
Extension Pole 4′-8′ ft
- Attach 9" or 18" roller frames to this versatile pole to install beautiful floor coatings
- The pole extends from 4 to 8 feet
- Roller Frames sold separately
-
Aluminum Oxide High Wear Abrasion Resistant Additive | 220 Grit | 325 Grit for Urethane & Polyaspartic
- Significantly improves abrasion resistance of floor coatings
- Helps create a tough, durable, abrasion resistant surface
- Simple and easy to add while mixing a coating
- Works with any urethane and thin film polyaspartic coating
- Works well with high performance 2 part floor coatings
-
Spike Shoes – Flexible | Walk on Wet Epoxy, Polyaspartic, Urethane Floor Coatings
Starting at $175.00 -
Spiked Roller Cover Metal (Porcupine) 9″ and 18″ Release Trapped Gas Bubbles
- Sturdy metal construction
- 13/16" Long Metal spikes
- Available in both 9" and 18" sizes (does not include handle)
- Helps remove gas bubbles that can form in floor coatings for a variety of reasons
-
Spiked Roller Cover Plastic (Porcupine) 9″ and 18″ Release Trapped Gas Bubbles
- Sturdy plastic construction
- Long 13/16" plastic spikes
- Available in both 9" and 18" sizes (does not include handle)
- Effectively removes gas bubbles that can form in floor coatings for a variety of reasons
-
Dripless DC600 Dual Component Joint Filler Cartridge Gun 300ML x 300ML | Epoxy Polyurea
- Dual-Component twin cartridge gun
- Each cartridge holds either 11 oz /300 ml or 5.5 oz / 150 ml of product
- Handles both 1:1 (300 ml x 300 ml) or 2:1 (300 ml x 150 ml) mix ratio tube configuration
- Quickly Apply Polyurea, Epoxy, Urethane Products
- Easy Application Of our Polyurea repair products: 3246, 3004, 800, 830 and the Epoxy/Urethane E443
-
Fan Deck Marketing Tool | Flakes & Chips | Quartz Granules | Epoxy Pigment | Metallics Pigments
- Great Sales Sample and Selling Tool
- Great Way To Visualize 52 different floor color and flake options
- Quickly Show Customers How You Can Make Their Floor Look Great
- 52 Different Color Choices & Blended Flakes From Floorguard Products
-
Random Cut Glitter Flakes for Epoxy, Polyaspartic, Urethane Coatings
- Adds Bright Diamond Like Sparkle Appearance to Floor
- Mix with Any Flake Blend Before Broadcasting into Floor
- Easy to use with typical mix ratio +/- 3% to 5% Random Cut Glitter
- 12 Beautiful Colors to Choose From
- Provides a delicate and radiant shimmer that brings timeless elegance to every detail
-
Phenolic Core Roller Covers 9″ | Case of 12
- For spreading and leveling mastics, anti-slip floor coatings, and other heavy coatings as recommended by manufacturer
- Professional phenolic roller resists water and solvents
- Available in 9" size
- Comes in package of 12 Roller Covers
-
Gauge Rake 24 in “Sled Type” For Smooth Application Cementitious, Slurry, Thick Coatings
- Apply high build urethane and epoxy slurry's, mortars and coatings and cementitious materials at a precise, predetermined uniform depth
- T-Skates adjust from 0 to 2 inches
- Thin sleds make a minimal disturbance in application
- Tool is lightweight, yet sturdy
- 24" wide
-
Floorguard Sales Samples on Hard 5″x5″ Boards of Flake/Chip & Pigment Color Options | 66 Samples
Starting at $425.00 -
ACL 800 Digital Electronic Megohmmeter ESD Resistance | Resistivity | Temp | Humidity
- High Performance Digital Megohmeter Kit
- Measures Surface Resistivity, Resistance, Temperature, Humidity
- Measurement range for 10v resistance is from 103 to 106
- Measurement range for 100v resistance is from 106 to 1012
- Accuracy ±10% at 103 - 108
-
SX-20201 Replacement Pump for US SAWS Polyurea Joint Filler Pumps
- Reduce Labor Costs & Significantly Increase Application Speed
- Production rates of up to 4,000 to 7,000 lineal feet per day
- Reduce Material Waste
- Allows Quick Joint Filling vs Cartridge Application
- Works With Both Polyurea and Epoxy 2 Part Joint Fillers
-
SX-20017 Tank Warmers For Cold Weather for US SAWS Polyurea Joint Fill
- Reduce Labor Costs & Significantly Increase Application Speed
- Production rates of up to 4,000 to 7,000 lineal feet per day
- Reduce Material Waste
- Allows Quick Joint Filling vs Cartridge Application
- Works With Both Polyurea and Epoxy 2 Part Joint Fillers
-
SX-20116 Manifold With Grease Fittings for US SAWS Polyurea Joint Fill
- Reduce Labor Costs & Significantly Increase Application Speed
- Production rates of up to 4,000 to 7,000 lineal feet per day
- Reduce Material Waste
- Allows Quick Joint Filling vs Cartridge Application
- Works With Both Polyurea and Epoxy 2 Part Joint Fillers
-
SX-20005-5 Polyethylene Tank 6.5 Gallons for US SAWS Polyurea Joint Fi
- Reduce Labor Costs & Significantly Increase Application Speed
- Production rates of up to 4,000 to 7,000 lineal feet per day
- Reduce Material Waste
- Allows Quick Joint Filling vs Cartridge Application
- Works With Both Polyurea and Epoxy 2 Part Joint Fillers
-
SX-21000 Polyurea Pump 2:1 Ratio Conversion Kit for US SAWS Polyurea J
- Reduce Labor Costs & Significantly Increase Application Speed
- Production rates of up to 4,000 to 7,000 lineal feet per day
- Reduce Material Waste
- Allows Quick Joint Filling vs Cartridge Application
- Works With Both Polyurea and Epoxy 2 Part Joint Fillers
-
SX-21023 Power Inverter 1200W for US SAWS Polyurea Joint Filler Pumps
- Reduce Labor Costs & Significantly Increase Application Speed
- Production rates of up to 4,000 to 7,000 lineal feet per day
- Reduce Material Waste
- Allows Quick Joint Filling vs Cartridge Application
- Works With Both Polyurea and Epoxy 2 Part Joint Fillers
-
SX-20005-6 Polyethylene Tank Cover 6.5 Gallon for US SAWS Polyurea Joi
- Reduce Labor Costs & Significantly Increase Application Speed
- Production rates of up to 4,000 to 7,000 lineal feet per day
- Reduce Material Waste
- Allows Quick Joint Filling vs Cartridge Application
- Works With Both Polyurea and Epoxy 2 Part Joint Fillers
-
SX-20111 Static Mixer Retaining Nut for US SAWS Polyurea Joint Filler Pump
- Reduce Labor Costs & Significantly Increase Application Speed
- Production rates of up to 4,000 to 7,000 lineal feet per day
- Reduce Material Waste
- Allows Quick Joint Filling vs Cartridge Application
- Works With Both Polyurea and Epoxy 2 Part Joint Fillers
-
Looped Nap Roller Covers 9″ & 18″ | Case of 12 | For Heavy Aggregate Epoxy and Urethane Slurry
- Great for applying coarse aggregate epoxy coatings and urethane slurries
- Use with all texture paints
- Durable, plastic looped material applies paint and creates decorative effects in one step
- Looped vinyl material
- Phenolic core resists water, solvents, and cracking
-
Metallic Epoxy Pigment Fan Deck Samples | 51 Dramatic Colors | Marketing Tool
- Great Sales Sample and Selling Tool
- Great Way To Visualize 50 different metallic floor color combinations
- Quickly Show Customers How You Can Make Their Floor Look Great using 3-D, Pearlescent and Translucent Metallic Pigments
- Actual Metallic Pigment Samples Applied over a Solid Color Primer
-
Quartz Granule Fan Deck Samples | 25 Factory Blended Colors | Marketing Tool
- Great Sales Sample and Selling Tool
- Great Way To Visualize 25 different quartz granule color blend combinations
- Quickly Show Customers How You Can Make Their Floor Look Great using Quartz Granules
- Actual Quartz Granule Grade 40-S Samples
-
Vinyl Flake Fan Deck Samples | 38 Popular Factory Blended Colors | Marketing Tool
- Great Sales Sample and Selling Tool
- Great Way To Visualize 32 different vinyl flake color blend combinations
- Quickly Show Customers How You Can Make Their Floor Look Great using decorative Vinyl Flakes
- Actual Vinyl Flake 1/4" Samples
-
Static Mixer For E5830 Joint Filler Dual Cartridge Concrete Repair Kit
Starting at $30.00 -
Terrazzo, Hybrid & Mica Enhanced Stone Flake Fan Deck Samples |Popular Factory Blended Colors | Marketing Tool
Starting at $47.00 -
7″ Concrete Pro Hand Grinder Kit | Metabo W24-230 | Dust Shroud | (2) 12 Segment Wheels | Loop Handle
- Hand-held units that are great for smaller jobs or in combination with walk-behind grinders on larger projects
- Use on concrete for cleaning, leveling high spots or uneven floor surfaces, removing glues, mastic, epoxies and other coatings
- May be connected to a variety of dust collection systems for dust containment
- The unit’s polyurethane dust shroud is long lasting and is offered in full shrouds and convertible models that flip up to allow for edge work along walls
- Kit include electric grinder, dust shroud (full or convertible), (2) diamond cup grinding wheels and hardware for mounting threaded diamond cup wheels, ZEC wheels, or polishing pads
-
5″ Concrete Pro Hand Grinder Kit | Metabo WEV-125 Quick HT | Dust Shroud and (1) 9 Segment Wheel
- Hand-held units that are great for smaller jobs or in combination with walk-behind grinders on larger projects
- Use on concrete for cleaning, leveling high spots or uneven floor surfaces, removing glues, mastic, epoxies and other coatings
- May be connected to a variety of dust collection systems for dust containment
- The unit’s polyurethane dust shroud is long lasting and is offered in full shrouds and convertible models that flip up to allow for edge work along walls
- Kit include electric grinder, dust shroud (full or convertible), (1) 9 Segment Diamond Turbo Cup Arbor Wheel and hardware for mounting threaded diamond cup wheels, ZEC wheels, or polishing pads
-
Cove Trowel for Vertical Walls | 4″ and 6″ Height | Curved Blade | Easy Application | Wood Handle
- Curved designed for smooth, professional looking cove application
- Easy to use
- Wood Handle
- Tough steel construction