4.5 Gallon Kit
Showing 1–8 of 12 results
-
ARCRETE Epoxy Primer & Rebuild | Horizontal | Secondary Containment| Repair, Smooth or Level |100% Solids
- Rebuild for Repair, Smoothing or leveling of Horizontal Areas
- Solvent and VOC free product
- Used in High Build Areas
- Chemically Resistant
- Rapid Turnaround
-
ARCTHANE Epoxy & Urethane Caulk | 500% Elongation | Expansion Joint Sealing & Crack Repair
- High elongation and elastomeric
- Flexible resilience
- Improved water & chemical resistance
- Strong Expansion Joint Sealing & Crack Repair
- 100% Solids
-
EE-10 Epoxy Primer | 98% Sulfuric Acid Immersion Service | 100% Solids
- Excellent for 98% Sulfuric Acid Immersion
- Strong Chemical Resistance
- Good in aggressive acid environments
- Immersion and Non-Immersion Service
- Work on Ferrous and Non-Ferrous Metals & Concrete
-
EE-121HT Amine Cured 100% Solids Novolac Epoxy | Top Coat | High Heat
- Temperature resistance up to 500F (dry) and spike to 580F (3 hours)
- Strong chemical resistance
- 100% solids
- Very good abrasion
- Great for aggressive, industrial applications
-
EE-70 Amine Cured 100% Solids Spray Apply Epoxy | Secondary Containment | NSF 61 Potable Water | USDA | Chemical Resistant | Tanks | Floors | Pipes
- Secondary Containment Application
- Can be applied to damp or wet substrates
- 100% Solids
- Chemical and Abrasion Resistant
- Immersion and Non-Immersion Service
-
EE-71 Amine Cured 100% Solids Novolac Epoxy Topcoat| Secondary Containment | Chemical Resistant | USDA | 100% Solids
- Used in Aggressive Environments with Exposure to Acids and Alkalis
- Chemical Resistant
- Excellent Flexibility
- High Abrasion Resistance
- Hand or Spray Application
-
EE-72 Novolac High Heat Epoxy | Immersion to 245ºF | Dry Heat to 400ºF (3 Hrs) | Secondary Containment | Chemical Resistant | USDA | 100% Solids
- Strong chemical resistance to acids and alkalis
- High Heat Environments
- Immersion Service to 245ºF
- Dry Heat to 400ºF (3 Hrs)
- High Build Formula to 100 mils DFT (dry film thickness) in One Coat
-
EE-80 Solids Epoxy Pre-Primer | Structural Steel, Tanks, Waste Water | Chemical Resistant | USDA | 100% Solids
- Low Viscosity Epoxy
- Increases Adhesion of Coating System to Metal Surfaces
- Tough, Water Resistant Coating
- 100% Solids