Wall Primer Archives

Chalky Wall Sealer and Clear Acrylic Primer

From: $23.00

READY-TO-USE OR CONCENTRATE

Select options

From: $55.00

Prime over Steel, metal, weathered galvanized steel, aluminum, fiberglass, polyurethane foam and previously painted surfaces
Excellent “wetting out” properties and performance over sound rusty surfaces
Outstanding abrasion & chemical resistance
Very good weather resistance
Excellent corrosion resistance, passed 1,200 hrs in salt cabinet
Fast recoat 2-3 hours at 75°F & 50% R.H
Cures down to 18°F and apply up to 140°F
High heat resistance to 400°F dry
Single component, easy to use
Topcoat with most Epoxy, Urethane , Silicone
Excellent barrier coat over lead based coatings
USDA Approved

Select options

From: $50.00

Select options

From: $95.00

High solids DTM (direct-to-metal) chemical resistant steel primer or finish coat to steel and concrete
Self priming to steel including tight rust
Apply Vertical Surfaces to 8 mils DFT Steel & Concrete
Great primer for use with our E1500HN (horizontal) and E555VN (vertical) Novolac Chemical Resistant Epoxies
USDA Approved
Tight film, low permeability.
Exceptional adhesion Exceeds 500 psi
Excellent impact resistance 90 in lb
Excellent abrasion resistance CS 17 Wheel, 1000 cycles, 1000 g Load 21 mg loss
Excellent against rust “undercutting”
Easy to apply brush, roll and spray
Low temp cure version to 25°F
Available 13 colors

Select options

From: $87.00

Select options

Out of stock

Promotes adhesion and bonding on hard to paint surfaces
Glazed Tile, Plastic, Glass, Fiberglass, Glossy Surfaces, Kitchen Cabinets
Tightly bonds to slick and glossy surfaces
Assures uniform appearance of topcoats
One coat application
Fast dry
Use as bonding primer with Cool Coat Thermal Barrier Paint
Topcoat With Hi-Performance coatings such as epoxy, polyaspartic, urethanes, lacquers and both oil and water based acrylics

From: $56.00

Easy construction of vertical cove bases
100% Solids Commercial Grade Epoxy
High build formula
5 color options
Comes as 3 part kit with aggregate or Liquid Only to add your own aggregate or NP1 can also be used as a primer.

Select options

From: $68.00

Select options

From: $36.00

Great for Cleaning Efflorescence, Minerals and Stains on both Walls & Floors
Important Preparation Step Before Applying Paint, Decorative Floor Coating and Clear Sealers
Simply spray on and rinse off, no scrubbing needed
Cleans wide range of concrete, masonry, stone, tile
Does not require respirators.
Won't etch or damage glass & anodized window frames
Reduces water introduction that prevents more efflorescence

Select options

From: $26.00

Select options

Out of stock

Rust-inhibitive for steel, aluminum, galvanized steel
Excellent corrosion-resistant primer
Use with all acrylic, alkyd, urethane, epoxy topcoats – both solvent & water base
Early moisture resistant
Quick dry to recoat time for faster project turnaround
Low temperature application down to 40F
Use as bonding primer with Cool Coat Thermal Barrier Paint
Available in red-oxide, gray and off-white
Acceptable for use in USDA-inspected facilities
Low VOC, water base, complies with SCAQMD & CARB