- 10' coated high - strength tensile wire for long-lasting durability
- 10mm male snap connection for ESD mats and runners
- Ring termination design for secure grounding point attachment
- 1 meg ohm resistor for controlled static discharge protection
Call us (630) 675-4509
Production areas are the most important spaces in your business. When the products you produce can be harmed or destroyed by a small charge, avoiding such an outcome is a big a deal. Exterior Performance Coatings offers the best in anti-static floor finishes and ESD (electrostatic dissipative) safe flooring solutions.
We carry everything you need to protect areas and products sensitive to static. Want to add ESD protection to your flooring? Shop our selection ESD/anti-static floor finishes, concrete paints, and applicators. If you are looking to maintain your preexisting ESD flooring, we offer ESD floor neutralizers, restorers, and cleaners. Contact us today if you have any questions.
Show
Filter by
Filter by
Filter by
ACL 880 Digital Electronic Megohmmeter ESD Resistance | Resistivity | Very High +/- 2% Precision Acc...
$1,795.00-
Why 880 Megohmmeter?
- High Performance Digital Megohmeter Kit
- Alphanumeric LCD scale shows precise value
- Resistance range: 10³ - 10¹² ohms
- Test voltage range:
- <10 volt variable: 10³ - 9.9x103 ohms
- 10 volt ± 0.5 volts: 1.0x104 - 9.9x105 ohms
- 100 volt ± <5 volts: 1.0x10⁶ - 9.9x1012 ohms
- Accuracy:
- 10³ - 10¹⁰ ohms: < ± 2%, ± 2 counts
- 10¹¹ - 10¹² ohms: < ± 10%, ± 4 counts
- Made in USA
- Ideal for testing according to ESDA test methods
- Includes calibration certificate traceable to NIST
- Includes 1 year mfg warranty
10R ESD Anti-Static Primer Concrete Moisture Sealer
From: $225.00- Clear Primer / Sealer Protects Against Moisture Damage Prior to Applying ESD Floor Coatings
- Vertical and Horizontal Applications
- Penetrating Formula
- 100% Vapor Permeable
- Water Based
- Use With 4700SS ESD Anti-Static Floor Paint
4000 Acrylic Static Dissipative Clear Floor Finish
From: $290.00- Acrylic Clear Static Dissipative Floor Finish
- Use on Vinyl, Linoleum, or Ceramic Tile
- Strip Cycle to 12 mos
- Abrasion Resistant, Water Base, Low VOC
- UL Listed Slip Resistant and ANSI S20.20-2007
- Great For Electronics, Medical, ESD Protected Areas
4010 Acrylic ESD Floor Stripper Concentrate
From: $250.00- Prepare Floors to Apply Acrylic Floor Finishes
- Removes Multiple Coats
- Neutral Cleaning Not Required
- Low Foaming
- For Electronics Mfg, Assembly, ESD Protected Areas
- Biodegradeable, Water Base, Low VOC
4018 Acrylic Dissipative Floor Finish | ESD Floor Coating for Vinyl, Linoleum & Tile | ANSI/ESD...
From: $260.00- Static Dissipative Performance — Surface resistance (RTT) of 10e8–10e9 ohms @ 100V and 12% RH
- ANSI/ESD S20.20 Compliant
- UL Listed for Slip Resistance
- Low VOC Formula — VOC content under 4%
- Durable High-Gloss Finish — Typical strip cycle of up to 6 months
- Excellent Coverage — Two coats cover approximately 750–1,000 sq. ft. per gallon
- 18% Solids Content (±5%)
- Easy Maintenance & Recoating
- Compatible with Vinyl, Linoleum & Ceramic Tile Floors
4020 ESD Neutralizer Cleaner Concentrate
From: $200.00- Great Anti-Static Neutralizer Cleaner
- For Concrete, Tile, Metal, Glass, Porecain
- Economical Concentrate 128:1
- Biodegradeable and Safe for Sewage Septic Systems
- Low Foam
- Non-Abrasive, No Streaking or Film Forming
4030 ESD Neutralizer Cleaner Ready-to-Use
From: $90.00- Great Anti-Static Neutralizer Cleaner
- For Concrete, Tile, Metal, Glass, Porecain
- Ready-to-Use
- Biodegradeable and Safe for Sewage Septic Systems
- Low Foam
- Non-Abrasive, No Streaking or Film Forming
4040 Universal Cleaner Concentrate | Use on Electronic Manufacturing, ESD Floor, Concrete Floor | De...
From: $200.00- Powerful degreaser
- Safe for ESD tile, epoxy and paint
- Neutral pH
- No phosphate, ammonia or bleach
- Dilution ratio 5:1 (5 parts water to 1 part cleaner)
- Covers approximately 5000 square feet per diluted gallon
4100 ESD Restorer | Cleaner Concentrate
From: $282.00- Lowers resistivity & Return Floors to Safe Spec
- Restores Floor Gloss
- Lengthens Maintenance Cycle
- Meets ANSI S20.20-2007
- Removes Black Heel Marks & Easily Buffed
- Non-toxic, Biodegradeable Concentrate (10:1 ratio)
4400 ESD Polyurethane Anti-Static Floor & Wall Paint | ANSI/ESD S20.20 | Zero VOC | Reinforcing...
From: $390.00- Provides 100% anti-static control, even at low levels of humidity
- Conforms to ANSI/ESD S20.20-2020 when tested according to ANSI/ESD STM7.1
- Static dissipative: 105 to 108 ohms
- Water based with Zero VOC- 0 g/L
- High physical durability with reinforcing fibers
- Resists yellowing and UV color fading.
- Easy soap and water cleanup.
- Designed for concrete, wood, drywall and previously painted surfaces
- Available with Satin Finish in a Medium Gray and Dark Gray color
- Withstands alcohol, oil, gasoline and most common electronic chemicals
- Biodegradeable - Non-hazardous | Non-flammable
4600 Ultra Static Dissipative Clear Urethane Floor Finish
From: $330.00- Abrasion Resistant Urethane Enhanced Finish
- Use on Vinyl, Linoleum, or Ceramic Tile Floors
- Increase Strip Cycle to 24 Mos
- Meets ANSI S20.20-2007
- UL Listed Slip Resistant
- Great For Electronics, Medical, ESD Protected Areas
4800 Ultra II Static Dissipative Clear Urethane Floor Finish
From: $350.00- Abrasion Resistant Urethane Enhanced Finish
- For Concrete, Epoxy, ESD epoxy, Dissipative Tile
- Increase Strip Cycle to 24 Mos
- Meets ANSI S20.20-2007
- UL Listed Slip Resistant
- Great For Electronics, Medical, ESD Protected Areas
6210 ESD Polycoat Anti-Static Floor Paint | Dissipative | Clear | ANSI/ESD S20.20-2014
From: $140.00- Suitable for dissipative packaging outlined in ANSI/ESD S20.20
- Resistance: 10e6-10e9 ohms/sq when tested to ANSI/ESD STM11.11 88
- Dissipative Coating
- Water-based polyurethane with zero VOC
- Reduces tribocharging
- Coverage: 200-250 square feet per gallon
- High durability
- Translucent with a suspension of opaque blueish-grey conductive particles
- For plastics, concrete, unfinished wood, or tile (multi-surface compatible)
- Made in the USA
6700 Premium ESD Static Dissipative Anti-Static Floor Paint | 9 Colors | ANSI/ESD S20.20-2014
From: $384.00- Static dissipative 10e7 - 10e9 ohms
- Conforms to ANSI/ESD S20.20-2014 when tested according to ANSI/ESD STM7.1
- No hot spots
- Excellent adhesion and color retention
- Good resistance to abrasion, oils and washing
- Use on Concrete, Wood, Metal surfaces
- Interior or exterior use
- Non-hazardous, Non-Flammable, low VOC
- Low gloss sheen
- 9 In-Stock Colors, Custom Colors Available
6700C Premium ESD Static Conductive Anti-Static Floor Paint | 3 Colors | ANSI/ESD S20.20-2014
From: $425.00- Static Conductive 10e3 - 10e6 ohms
- Conforms to ANSI/ESD S20.20-2014 when tested according to ANSI/ESD STM7.1
- No hot spots
- Excellent adhesion and color retention
- Good resistance to abrasion, oils and washing
- Use on Concrete, Wood, Metal surfaces
- Interior or exterior use
- Non-hazardous, Non-Flammable, low VOC
- Low gloss sheen
- 3 Colors Available - Light Gray, Dark Gray, Black
8090 ESD Grounding Cord for Static Dissipative Floor Mats
$25.00
CoatZF ESD Low-VOC Dissipative Clear Floor Finish | Static Control | ESD and Non-ESD Floors | 5 Gall...
$450.00- Zinc-free
- Static dissipative (1 x 10E6 to < 1 x 10E10 ohms) Coating - ANSI/ESD STM7.1 and ESD TR53
- Low tribocharging (<100 volts) coating - ANSI/ESD STM97.2
- 23% Solids- 2 Coat System** Reduces labor needed for initial install and on-going maintenance of the floor
- Hard, wear resistant – ASTM Standard D2134.93
- UL listed for slip resistance
- Low VOCs & Tribocharging
- Easy to Apply
- Long-Lasting Static Protection
- Designed for High-Traffic Areas
EcoScrub Floor Stripper/ Degreaser
From: $130.00- Rinse-free formula
- Low foaming
- No environmentally toxic preservatives
- Low Odor
- Non caustic
- Removes CoatZF Static-dissipative floor finish
- Use With Groundworx Basic ESD Epoxy Floor for heavily soiled areas.
ESD 640 Textured Conductive Vinyl Chair Floor Mat Protects Anti-Static Floors | Meets ANSI 20.20
From: $120.00- Resistant to acids, reducing agents, detergents, alcohols, hydrocarbons, mineral oil, amines and aldehydes
- Black, pebble-embossed textured surface
- Single layer .080" (2.032 mm) thickness
- Conductive, <1e6 ohms ANSI/ESD S7.1
- Operating Temperature -20F to 200F (-29C to 93F)
- Grounding snap add upon request
- Made in USA
ESD Cleaning Buffing Pads | Use with Eco Scrub Degreaser
From: $40.00- Gray Scrub Pad provides great initial maintenance for light to moderate soiled floors
- Maroon Scrub Pad provides great maintenance for moderate to heavy soiled floors
- Use for both sides of scrub pad
- 1,500 square ft coverage
- Enhanced cleaning for ESD floor systems
- Use with the Eco Scrub Degreaser.
ESD Conductive Anti-Fatigue Cushioned Floor Mat Protects Anti-Static Floors | Meets ANSI 20.20
From: $335.00- Conductive 1/2" cushioned Anti-Fatigue Floor Mat
- Resistance point to point measures 1x10e5 – 1x10e7 ohms
- Dissipative cushioned under layer
- Smooth surface
- Beveled edges
- Equipped with 10mm female ground socket
- 10’ grounding cord
- Made in USA
- Protects ESD Flooring & ESD Paint Investment
- Comes in 3 sizes
ESD Conductive Floor Runner Protects Anti-Static Floors | Meets ANSI 20.20 | 48″W x 75’L
$3,400.00- Protects ESD Flooring & ESD Paint Investment
- Solid Flat Surface Impervious to Damage from Chair Casters
- Great for Long Workbenches or easy cut to size with utility razor knife: 48"W x 75'L
- Conductive Anti-Static Protection
- Continuous and Permanent Path-to-Ground
- Lifetime Warranty ANSI S20.20 & ANSI S7.1-2005
- Electrical properties are warranted for the lifetime of the mat
- Resistance measures 10e4 – 10e6 ohms per ANSI/ESD S7.1-2005
- Compliant to ANSI/ESD S20.20
- Solid single layer is .090" (2.29 mm) thick
- Low outgassing and low VOC
- Made in the USA
ESD Conductive Vinyl Chair Floor Mat Protects Anti-Static Floors | Meets ANSI 20.20
From: $200.00- Protects ESD Flooring & ESD Paint Investment
- Solid Flat Surface Impervious to Damage from Chair Casters
- Conductive Anti-Static Protection
- Continuous and Permanent Path-to-Ground
- Lifetime Warranty ANSI S20.20 & ANSI S7.1-2005
- Comes in 3 sizes
- Electrical properties are warranted for the lifetime of the mat
- Resistance measures 10e4 – 10e6 ohms per ANSI/ESD S7.1-2005
- Compliant to ANSI/ESD S20.20
- Solid single layer is .090" (2.29 mm) thick
- Low outgassing and low VOC
- Made in the USA
ESD Copper Grounding Strips | ANSI/ESD S20.20 | Conductive Grounding For Floor Paint
From: $50.00- Safely ground floor coating systems
- Meet ANSI 20.20 grounding standards when used in conjunction with proper safety items
- Easy to Apply With Adhesive Backing
ESD Heel Grounders for Static Control Floor Protection
From: $35.00- Compliant with ANSI/ESD S97.2, ESD SP9.2, ANSI/ESD S20.20, IEC 61340-5-1
- Two layer heel rubber
- Black conductive exterior – 10e4 ohms and 1 meg ohm resistor
- White insulative interior prevents carbon marking on shoes
- Conductive ground ribbon measuring 14.5” x .5"
- Helps reduce static buildup on personnel in ESD controlled environments
- Designed for use with conductive and static dissipative flooring systems
- Adjustable design fits most work shoes and safety footwear
- Comfortable for extended daily wear in industrial environments
ESD Vinyl Workspace & Chair Mat For Anti-Static Floors | Conductive ANSI 20.20 | Slip Resistant...
From: $130.00- Protects ESD Flooring & ESD Paint Investment
- Impervious to Damage from Chair Casters
- Great for workstations with Slip Resistant Textured Surface
- Conductive Anti-Static Protection
- Continuous and Permanent Path-to-Ground
- Lifetime Warranty ANSI S20.20 & ANSI S7.1-2005
- Comes in 2 sizes (36"x60" and 48"x72")
GroundWorx Basics (SF) ESD Static Conductive Epoxy Floor Coating | Water Based | ANSI/ESD S20.20-201...
From: $1,083.00- Conductive 2 Part Water Based Thin Film Epoxy Floor Coating
- Conductive range 2.5 x 104 - 3.5 x 107 ohms
- System Resistance (w/ ESD Footware) < 3.5 x 107 (fully compliant) ANSI/ESD STM 97.1
- Warrantied ANSI S20.20 performance
- Meets ANSI/ESD S20.20-2014 (S97.1 and S97.2), DOD 4145.26M, HDBK263A
- Easy to Install
- For Concrete, Wood, VCT Tile Floors
- Use in Electronics Mfg, Assembly, ESD Protected Areas
- 6 Colors. Pewter Gray Color available for immediate shipment
GroundWorx Basics (SF) ESD Static Dissipative Epoxy Floor Coating | Water Based | ANSI/ESD S20.20-20...
From: $1,083.00- Static Dissipative 2 Part Water Based Thin Film Epoxy Floor Coating
- Static Dissipative 10e6 to 10e9 ohms
- Warrantied ANSI S20.20 performance
- Meets ANSI/ESD S20.20-2014
- Easy to Install
- For Concrete, Wood, VCT Tile Floors
- 6 Colors.
- Static Dissipative version of Groundworx is special order 4-5 week lead time. Most projects use the Conductive Version of GroundWorx with immediate shipment of Pewter color
GroundWorx Ultra (HB-97.2) ESD Static Conductive Epoxy Basecoat 100% Solids | Forklift Traffic | ANS...
From: $555.00- Static dissipative or conductive high build epoxy electrical protection when used with the GroundWorx Ultra ESD Urethane Topcoat which comes in either dissipative >1.0 x 10e6 ohms or conductive <1.0 x 10e6 ohms electrical resistance, limiting Static Charge Generation to <15 volts
- Great for high traffic, high wear commercial & industrial applications as high build 14 mil ESD system at <$4.00/sq' material cost
- Use on Concrete, Wood and old VCT surfaces
- Moisture tolerant primer
- Excellent adhesion 350 psi
- 100% solids, 0 g/L voc
- Conforms to ESDA, ANSI standard S20.20-2014 when used with GroundWorx Ultra ESD Urethane Topcoat
- Gloss sheen
- 8 standard colors & custom colors available
GroundWorx Ultra (HB-97.2) ESD Urethane Top Coat | Static Dissipative or Conductive | ANSI S20.20-20...
From: $1,350.00- Optional Static conductive <1.0 x 10e6 ohms or Dissipative >1.0 x 10e6 ohms and <1.0 x 10e9 high performance electrical protection, limiting Static Charge Generation to <15 volts
- Great for high traffic, high wear commercial & industrial applications as high build 14 mil ESD system at <$4.00/sq' material cost
- Conforms to ESDA, ANSI standard S20.20-2014 when used with GroundWorx Ultra ESD Epoxy Primer
- Use on Concrete, Wood and old VCT surfaces
- Tough surface: impact resistance 140 psi and tabor abrasion test 25 mg loss
- Surface: Anti-slip, ROHS compliant
- No wax required – easy to keep clean
- Satin to Semi-gloss sheen
- 8 standard colors & custom colors available
- Each 2 gallon kit includes 8 oz anti-slip clear glass beads for improved safety in wet conditions
GroundWorx Ultra Elevated Moisture Epoxy Primer | For Use In GroundWorx Ultra Epoxy Systems | Zero V...
$650.00- Protects ESD Coatings System from moisture related issues (withstands up to 8lbs of moisture vapor pressure)
- Apply when relative humidity is up to 95%
- Significantly reduce chance of concrete outgassing
- Great for high traffic (forklift & pallet jack), high wear commercial & industrial applications
- Conforms to ESDA, ANSI standard S20.20-2014 when used with the GroundWorx Ultra ESD Epoxy Basecoat
- Concrete Applications
- Zero VOC
ScrubWorx 20.20 ESD Floor Cleaner Concentrate
$225.00- Rejuvenate and Improve Static Dissipative Properties of any Dissipative Floor Finish
- Micro-Clean & Conditions
- Cleans floors Treated with Staticworx CoatZF Floor Finish
- Designed For Maintenance programs to Reduce static electricity buildup
- Increase Conductivity of Surfaces Where Sensitive Electronic Components in-use or manufactured
- Cost effective concentrate formula
- Effective on vinyl, vinyl-asbestos, rubber, linoleum, ceramic and concrete surfaces
Staticide ESD Mat Cleaner | Anti-Static Neutral Cleaner for ESD Mats
From: $67.00- Works with our selection of Anti-Static Mats
- Maintains the surface resistivity of ESD mats
- Cleans without leaving film, residue, or streaks
- Safe for rubber and vinyl anti-static mats
- Helps extend the life of ESD floor mats and workstation mats
- Removes flux residue, grease, fingerprints, dirt, and grime
- Contains no alkali, ammonia, or isopropyl alcohol
- Non-flammable formula for industrial and electronics environments
- Static decay under 2 seconds according to MIL-B-81705B
- No GHS classification, no REACH or RoHS SVHC
Staticide General Purpose | Static Control for All Surfaces
From: $80.00- Designed for Non-Porous Surfaces
- Compatible with Anti-Static & ESD Mats
- Fast Static Decay — Less Than 2 Seconds
- Effective in Low Humidity Environments Below 15% RH
- Surface Resistance: 10⁹ – 10¹⁰ ohms
- Meets MIL-B-81705 & NFPA-56A Electrostatic Decay Standards
- Conforms to DOD-HDBK-263 Requirements for Topical Anti-Stats
- Coverage Rate: Approximately 2,000 sq ft per gallon
- Long-Lasting Performance Depending on Surface & Traffic Condition
Staticide Heavy Duty Low Lint Wipes
From: $50.00- Use in conjunction with our Staticide ESD Mat Cleaner
- Low lint and low particle release
- Solvent resistant construction
- Compatible with IPA and common cleaners
- Soft, durable non-woven material
- Highly absorbent cellulose/polyester blend
- Available in white or blue
ACL 395 Electrostatic Surface Resistivity ESD Test Meter | Compact Easy to Use
From: $60.00- Surface Resistivity Pocket Test Meter
- Conductive Rubber Rails For The Best Contact
- LED Readout For Conductive, Dissipative, Insulative Surface
- Easy to Use
- Testing Per Parrallel Resistivity Probe ASTM D257
- Resistivity Limits 103 - 1012 Ohms Per Square
- With 5 lb weights comply to IEC 61340-4-1, ANSI S4.1 & ANSI S7.1 to Measure Point to Point & Resistance to Ground
ACL 800 Digital Electronic Megohmmeter ESD Resistance | Resistivity | Temp | Humidity
$1,450.00- High Performance Digital Megohmeter Kit
- Measures Resistivity, Resistance, Temperature, Humidity
- Measurement range for 10v resistance is 103 to 106
- Measurement range for 100v resistance is 106 to 1012
- Accuracy ±10% at 103 - 108
- Using (2) supplied 5 lb weights comply to IEC 61340-4-1, ANSI S4.1 & ANSI S7.1 to Measure Point to Point & Resistance to Ground
- Includes calibration certificate traceable to NIST
- Available in Farenheit or Celsuis Scale
Copyright 2024 by Exterior Performance Coatings LLC