Return to previous page
Filters
Show
1007 Polyurea Coating Fast Set Waterproof Spray Pelican Warehouse Floor Project

1007 Polyurea Coating Fast Set Waterproof Spray | Elastomeric 100% Solids

$7,326.00

  • 100% Pure Polyurea Waterproof Spray Coating
  • Fast 10-30 Sec Set Time - Quick Back In-Service
  • Flexible Elastomeric Spray 600%+ Elongation
  • Excellent Chemical, Abrasion Impact Resistance
  • Unlimited mil/coat & unlimited recoat window
  • Use on Concrete, Metal, Wood
  • Good for Garages, Marine Enviroments, Secondary Containment, Industrial Applications
Sold In 110 Gallon Drum Kits
Select options This product has multiple variants. The options may be chosen on the product page

3003 Polyurea Slow Set Interior Control Joint Filler | Low Temp -20°F

From: $176.00

  • Offers load transfer across control joints for good protection of edges
  • Back-in-Service "Drive-Over" in 30 to 60 minutes
  • Longer working time than the 3004 Fast Set Polyurea
  • 5-8 Minute Gel Time @ 77°F
  • Meets USDA Requirements for incidental food contact
  • Stays Flexible In Extreme Cold
  • Cold Applications down to -20°F (-29°C)
  • Not Sensitive To Moisture
  • Self-leveling
  • High Impact Resistance
  • Excellent Abrasion Resistance
  • Chemical Resistant
  • Apply using dual component pump, 300 ml x 300 ml cartridge kit or hand application (small projects)
  • 100% Solids, No VOC, No Odor
Select options This product has multiple variants. The options may be chosen on the product page
3004 Polyurea Concrete Control Joint Filler

3004 Polyurea Fast Set Interior Control Joint Filler | Low Temp -20°F

From: $176.00

  • Quick Back-in-Service "Drive-Over" in only 20-30 minutes
  • Offers load transfer across control joints for good protection of edges
  • Ideal for High Speed Application using Machine Dispensing System or for small projects easy application using twin cartridge kits and 300 ml x 300 ml cartridge kits (total 21 oz or 600 ml per cartridge kit)
  • Tack Free only 2-3 minutes
  • Meets USDA Requirements for incidental food contact
  • Stays Flexible In Extreme Cold with 300% Elongation
  • Cold Applications down to -20°F (-29°C)
  • Not Sensitive To Moisture
  • Non-Flammable
  • Self-leveling
  • High Impact Resistance
  • Excellent Abrasion Resistance
  • Chemical Resistant
  • 100% Solids, No VOC, No Odor
Select options This product has multiple variants. The options may be chosen on the product page
3246 Polyurea Expansion Joint Filler

3246 Polyurea Flexible Expansion Joint Filler | Exterior Interior | Low Temp -20°F | Elongation 600%...

From: $191.00

  • Quick 30 Min Back In-Service Joint Repair
  • Extremely Flexible 600%+ Elongation for extreme conditions
  • Abrasion, Chemical and Fuel Resistant
  • Great for Concrete Driveways, Parking Garages, Bridges, Warehouses
  • Outdoor control joint & all expansion joints
  • 100% Solids, Self leveling
  • Apply using High Speed Machine Application and for small projects easy application using twin cartridge kits and 300 ml x 300 ml cartridge gun
  • Cold Application Down to -20°F (-26°C)
Select options This product has multiple variants. The options may be chosen on the product page
4034 rapid set polyurea concrete repair

4034 ProGrout Polyurea Concrete Quick Repair | Ultra Low Viscosity | Apply Low Temp -20°F | Low Odor...

From: $175.00

  • Back-in-service as fast as 30 min with heavy forklift loads
  • Meets OSHA fork lift operator floor facility safety, surface conditions
  • Save Bearings & Wheels On Electric Pallet Jacks and Electric Lifts.
  • Meets USDA requirements
  • Cold applications down to -20°F (-26°C)
  • Nano-locks, penetrates deep into small concrete cracks with very low viscosity
  • Fuel resistant
  • Increase productivity by providing smooth operating surface any temp
  • Reduces facility “down-time” & maintenance man hours
  • Mix with sand for additional strength for larger crack and holes repairs
  • High tensile strength & durability (as strong or stronger than surrounding concrete)
  • Very low voc <5 g/L and Low odor
Select options This product has multiple variants. The options may be chosen on the product page
5" Metabo WEV15-125 Concrete Hand Grinder

5″ Concrete Pro Hand Grinder Kit | Metabo WEV-125 Quick HT | Dust Shroud and (1) 9 Segment Whe...

$450.00

  • Hand-held units that are great for smaller jobs or in combination with walk-behind grinders on larger projects
  • Use on concrete for cleaning, leveling high spots or uneven floor surfaces, removing glues, mastic, epoxies and other coatings
  • May be connected to a variety of dust collection systems for dust containment
  • The unit’s polyurethane dust shroud is long lasting and is offered in full shrouds and convertible models that flip up to allow for edge work along walls
  • Kit include electric grinder, dust shroud (full or convertible) (1) 9 Segment Diamond Turbo Cup Arbor Wheel and hardware for mounting threaded diamond cup wheels, ZEC wheels, or polishing pads
Select options This product has multiple variants. The options may be chosen on the product page
Hot
5500 Polyaspartic Coating Polyurea Aliphatic, Flexible, Waterproof

5500 Polyaspartic Polyurea Coating Roll Down Low Temp 30°F | 87% Solids

From: $149.00

  • Beautiful Decorative High Gloss Appearance
  • Cold Temperature Application to 30F using Fast Set
  • Easy Squeegee/Roller Application
  • Waterproof, Aliphatic Resists UV Non-Yellowing
  • Indoor & Outdoor Floor and Countertop Projects
  • Good In Submerged Service Projects Like Fountains
  • Works well on concrete, brick, steel, wood, fiberglass
  • Excellent Chemical & Abrasion Resistance
  • Highly Adhesive, Flexible & Non-Brittle
  • Optional Fast or Slow Set, High Heat & Humidty
  • Great For Garage Floors Using Chips & Flakes
  • Commercial and Industrial Applications
  • Use as Stand Alone System or Topcoat to Epoxy
Select options This product has multiple variants. The options may be chosen on the product page
7" W24-230 Concrete Hand Grinder

7″ Concrete Pro Hand Grinder Kit | Metabo W24-230 | Dust Shroud | (2) 12 Segment Wheels | Loop...

$640.00

  • Hand-held units that are great for smaller jobs or in combination with walk-behind grinders on larger projects
  • Use on concrete for cleaning, leveling high spots or uneven floor surfaces, removing glues, mastic, epoxies and other coatings
  • May be connected to a variety of dust collection systems for dust containment
  • The unit’s polyurethane dust shroud is long lasting and is offered in full shrouds and convertible models that flip up to allow for edge work along walls
  • Kit include electric grinder, dust shroud (full or convertible), (2) diamond cup grinding wheels and hardware for mounting threaded diamond cup wheels, ZEC wheels, or polishing pads
Select options This product has multiple variants. The options may be chosen on the product page
800 Polyurea

800 Slow Set Polyurea Adhesive Sealant & Caulk

From: $146.00

  • Self Leveling, Tough, Flexible, Sandable, Paintable
  • Chemical and Fuel Resistant Polyurea
  • Repair Concrete Cracks
  • Seals Plastic Connectors and Fittings
  • For Metals, Plastics, Fiberglass, Steel, Wood, Urethane, Polyurea, Concrete
  • 100% Solids, no VOC, 2 Component
  • Option for easy application using twin cartridge kits and 300 ml x 300 ml cartridge gun
Select options This product has multiple variants. The options may be chosen on the product page
830 Polyurea vertical crack repair

830 Fast Set Polyurea Repair | Joint Sealant | Caulk | Adhesive | No Sag Walls | Concrete | Steel | ...

From: $146.00

  • Tough, Flexible, Fast Set, Sandable, Paintable
  • Bonds to Concrete, Steel, Wood, Plastic, Fiberglass, Polyurea, Urethane
  • Repair Concrete Floors & Walls - Holds Vertical Bead
  • Chemical and Fuel Resistant Polyurea
  • Cold weather application down to -20F
  • Seal Plastic Connectors, Fittings
  • Quick, Easy, Effective Repair of Concrete Cracks
  • 3 Set Times Hard in 10 min, 15-20 min, 30-40 min
  • 100% Solids, no VOC, 2 Component
  • Option for easy application using twin cartridge kits and 300 ml x 300 ml cartridge gun
Select options This product has multiple variants. The options may be chosen on the product page
High Wear 325 Abrasion and Wear Resistant Additive

Aluminum Oxide High Wear Abrasion Resistant Additive | 220 Grit | 325 Grit for Urethane & Polya...

From: $31.00

  • Significantly improves abrasion resistance of floor coatings
  • Helps create a tough, durable, abrasion resistant surface
  • Simple and easy to add while mixing a coating
  • Works with any urethane and thin film polyasprtic coating
  • Works well with high performance 2 part floor coatings
  • Does not change physical properties of the coating
  • Well bonded into the body of the coating
  • High hydrolitic stability
  • White Color in options 220 grit and 325 grit
Select options This product has multiple variants. The options may be chosen on the product page
Aspartic 100 Polyaspartic Slow Set Floor Coating

Aspartic 100 High Build Polyaspartic for Concrete Floors | Low Temp 30°F | 100% Solids

From: $99.99

  • Tough, durable topcoat for interior epoxy floor coatings
  • Very low to no odor great for sensitive odor indoor projects
  • Can be used as high build topcoat up to 16 mils or 100 sq'/gallon
  • Cold temperature application down to 30°F
  • Excellent chemical and abrasion resistance
  • UV Stable,  Will Not Yellow
  • Beautiful high gloss appearance
  • Designed for high traffic and industrial areas
  • High solids 100%
  • Available clear & 14 colors (Pigment Sold Separate)
Select options This product has multiple variants. The options may be chosen on the product page
Aspartic 85 Polyaspartic Floorguard Products

Aspartic 85 Polyaspartic Quick Cure Concrete Floor Coating | Low Temp 30°F

From: $79.50

  • Tough, durable topcoat for interior epoxy floor coatings
  • Cold temperature application down to 30°F
  • Fast Curing for quick 5-7 Hours Back in-Service Light Foot Traffic
  • Excellent chemical and abrasion resistance
  • UV Stable and will not yellow
  • Beautiful high gloss appearance
  • Designed for high traffic and industrial areas
  • High solids 85%
  • Available in clear & 14 colors (Colored Pigment Sold Separately)
Select options This product has multiple variants. The options may be chosen on the product page
Aspartic 85 Polyaspartic

Aspartic 85 Slow Set Polyaspartic Concrete Floor Coating | Low Temp 30°F | Low Odor Option

From: $99.99

  • Tough, durable topcoat for interior epoxy floor coatings
  • Cold weather application down to 30°F
  • Benefits of a Polyaspartic With Longer 45-60 minutes Working Times
  • Excellent chemical and abrasion resistance
  • UV Stable and will not yellow
  • Beautiful high gloss appearance
  • Designed for high traffic and industrial areas
  • High solids 85%
  • Available in clear & 14 colors (Colored Pigment Sold Separately)
  • LOW ODOR version now available for indoor projects.
Select options This product has multiple variants. The options may be chosen on the product page
Dripless DC600 Dual Cartridge Guns 300ml x 300ml

Dripless DC600 Dual Component Joint Filler Cartridge Gun 300ML x 300ML | Epoxy Polyurea

$80.00

  • Dual-Component twin cartridge gun
  • Each cartridge holds either 11 oz /300 ml or 5.5 oz / 150 ml of product
  • Handles both 1:1 (300 ml x 300 ml) or 2:1 (300 ml x 150 ml) mix ratio tube configuration
  • Quickly Apply Polyurea, Epoxy, Urethane Products
  • Easy Application Of our Polyurea repair products: 3246, 3004, 800, 830 and the Epoxy/Urethane E443
  • Thrust Ratio 26:1 For Very High Viscosity Materials
  • Each Pull Of Trigger Advances Cartridges By 3.5 mm
  • Dual Steel Gripper Plates And Steel Push Disc Provide Durability
Select options This product has multiple variants. The options may be chosen on the product page
E-Poly Polyurea Floor Coating opt

E-Green Polyurea Basecoat for Concrete Floors | Low Temp 40°F | 100% Solids | 300% Elongation

From: $65.00

  • Tough, durable plant based Polyurea Coating
  • Extreme Flexibility (300% Elongation)
  • Exceptional Adhesion >500 psi ASTM D4541
  • Cold temperature application down to 0°F
  • Can be used as high build basecoat up to 16 mils or 100 sq'/gallon
  • Excellent chemical and abrasion resistance
  • Designed for high traffic and industrial areas
  • 100% Solids Performance
  • Available in clear & 14 colors!
  • Quick Cure 1 Day System
  • Little to NO ODOR
Select options This product has multiple variants. The options may be chosen on the product page
E344QC Polyaspartic Topcoat

E344QC Polyaspartic Quick Cure Concrete Floor Coating | 85% Solids

From: $73.00

  • Tough, durable topcoat for interior epoxy floor coatings
  • Fast Curing for quick back in-service
  • Excellent chemical and abrasion resistance
  • UV Stable and will not yellow
  • Beautiful high gloss appearance
  • Designed for high traffic and industrial areas
  • High solids 85%
  • Available in clear & 13 colors (Colored Pigment Sold Separately)
Select options This product has multiple variants. The options may be chosen on the product page
E344QC Polyaspartic Topcoat

E444X Polyaspartic High Gloss Concrete Floor Coating | 84% High Solids | Non-Yellowing | Low Odor

From: $65.00

  • Tough, durable topcoat for epoxy floor coatings
  • Indoor/Outdoor Applications
  • Can Apply Direct to Concrete
  • High solids 84%
  • Easy to Work With 1:1 Mix Ratio
  • Can be applied up 12 mils thick one coat (133 sq'/gallon)
  • Excellent chemical and abrasion resistance
  • UV Stable and will not yellow
  • Beautiful high gloss appearance
  • Designed for high traffic and industrial areas
  • Available in clear & 13 colors (Colored Pigment Sold Separately)
Select options This product has multiple variants. The options may be chosen on the product page
E344QC Polyaspartic Topcoat

E449 Polyaspartic Fast Cure High Gloss Concrete Floor Coating | 95% High Solids

From: $73.00

  • Tough, durable topcoat for epoxy floor coatings
  • High solids 95%
  • Quick back in service 3-5 hours light foot traffic
  • Can be applied up 12 mils thick one coat (125 sq'/gallon)
  • Excellent chemical and abrasion resistance
  • UV Stable and will not yellow
  • Beautiful high gloss appearance
  • Designed for high traffic and industrial areas
  • Available in clear & 13 colors (Colored Pigment Sold Separately)
Select options This product has multiple variants. The options may be chosen on the product page
E344QC Polyaspartic Topcoat

E450SF Polyaspartic Slow Cure High Gloss Concrete Floor Coating | 90% Solids (Formerly E449SF)

From: $80.00

  • Tough, durable topcoat for interior epoxy floor coatings
  • High solids 90%
  • Can be applied up 12 mils thick one coat (120 sq'/gallon)
  • Long Working time 20-25 min
  • Excellent chemical and abrasion resistance
  • UV Stable and will not yellow
  • Beautiful high gloss appearance
  • Designed for high traffic and industrial areas
  • Available in clear & 13 colors (Colored Pigment Sold Separately)
Select options This product has multiple variants. The options may be chosen on the product page
Newborn 435-XSP Dual Component Caulk Gun_

Newborn 435-XSP Dual Component Cartridge Gun 300ml x 300ml | 300 ml x 150 ml

$100.00

  • Dual-Component Gun 10.5 oz/300ml Cartridge in 1:1 and 2:1 Ratio 300 ml x 150 ml
  • Easily Converts to 300ml x 150ml cartridges
  • Quickly Apply Polyurea, Epoxy, Urethane Products
  • Easy Application Of Our Twin Cartridge Joint Fillers 3246, 3004, 4034, 830, E5830
  • Thrust Ratio 26:1 For Very High Viscosity Materials
  • Two-piece stamped steel friction plate
  • Heat treated piston rod for increased durability
  • Pressure release thumb plate offers easier pressure release
  • Horizontal cartridge loading
Select options This product has multiple variants. The options may be chosen on the product page
Newborn 535-XSP Dual Component Caulk Gun

Newborn 535-XSP Professional Dual Component Cartridge Gun 300ml, 150ml, 75ml

$115.00

  • Dual-Component Gun 10 oz/300ml Cartridge 1:1 ratio
  • Multi-Ratio Easily Converts with Snap In/Snap Out Push Disks for 300ml, 150ml 75 ml cartridges
  • Quickly Apply Polyurea, Epoxy, Urethane Products
  • Easy Application Of Our Twin Cartridge Polyurea's 3246, 3004, 4034, 830
  • Thrust Ratio 26:1 For Very High Viscosity Materials
  • Extra Durable Teat Treated Piston Rod
  • Precision Sintered Friction Plate
  • Patented Stabilizing Plate for Extra Cartridge Support
  • Easy Release Start Burst Reverse Gripping Plate
  • Hammered Finished Alloy Handle With Comfort Grip
Select options This product has multiple variants. The options may be chosen on the product page
Newborn 830A30 Pneumatic Dual Cartidge Gun 300ml x 300ml

Newborn 830A30 Pnuematic Dual Component Cartridge Gun 300ml, 150ml, 75ml

$350.00

  • Dual-Component Pneumatic Gun 10 oz/300ml Cartridges 1:1 ratio
  • 2.5" Cylinder Generates 490 lbs Nominal Thrust @100 psi
  • Quick application with smooth, even product flow
  • Multi-Ratio Convert to 300ml 150ml 75ml cartridges using snap-in disks
  • Quickly Apply Polyurea, Epoxy, Urethane Products
  • Easy Application Of Our Twin 10.5 oz/300 ml Cartridge Joint Fillers 3246, 3004, 4034, 830, E5830
  • Patented stabilizing plate securely holds cartridges
  • Adjustable heavy duty aluminum air regulator
  • Air dump valve stops flow instantly
  • Reverse air
  • Quick disconnect nipple
Select options This product has multiple variants. The options may be chosen on the product page
Newborn 850A30 HD Pneumatic Dual Cartidge Gun

Newborn 850A30 HD Pnuematic Dual Component Cartridge Gun 300ml, 150ml, 75ml

$575.00

  • Dual-Component Pneumatic Gun 10.5 oz/300ml Cartridges 1:1 ratio
  • Powerful 4" cylinder generates 1,100 lbs nominal thrush @100 psi
  • Quick application with smooth, even product flow
  • Multi-Ratio Converts to 300ml 150ml 75ml cartridges using snap-in disks
  • Quickly Apply Polyurea, Epoxy, Urethane Products
  • Easy Application Of Our Twin 10.5 oz/300 ml Cartridge Joint Fillers 3246, 3004, 4034, 830, E5830
  • Patented stabilizing plate securely holds cartridges
  • Adjustable heavy duty aluminum air regulator
  • Air dump valve stops flow instantly
  • Reverse air
  • Quick disconnect nipple
Select options This product has multiple variants. The options may be chosen on the product page
PIgmented Colors for 5500 Polyaspartic

Pigment Color For 5500 Polyaspartic Coating

$64.00

  • Pigment Designed to Color the 5500 Polyaspartic made by ASTC Polymers
  • Add a Beautiful Decorative Color to Your 5500 Polyaspartic Project
  • 7 Different Colors to Choose From!
  • Sold in Quart Containers - Colors 2-3 Gallons When Mixed Into Clear 5500
COMES IN 32 OZ CONTAINER
Select options This product has multiple variants. The options may be chosen on the product page
Pigment for E344QC Polyaspartic Quick Cure with 13 Colors

Pigment For E344QC, E444X, E449 and E450SF Polyaspartic

From: $45.00

  • Pigment Designed to Color E344QC, E444X, E449 and E450SF Polyaspartic Coating
  • Add a Beautiful Decorative Color to Your Polyaspartic Project
  • 13 Different Colors to Choose From!
  • Easy mixing using a Jiffy style mixer
COMES IN 8 oz and 16 OZ CONTAINER
Select options This product has multiple variants. The options may be chosen on the product page

Out of stock

static mixer for 21 oz dual cartrige kits

Static Mixer Used With 21 oz Dual Cartridge Concrete Repair & Joint Filler Kits

$25.00

  • Replacement Mixers for ASTC Polymers' 21 oz cartridge kits
  • Allows multiple applications from single cartridge kit
  • Mixes product in correct ratio and ready to apply
  • Select static mixer for your specific cartridge kit
  • For use with dual cartridge kits 800, 830, 3003, 3004, 3246, 4034
STATIC MIXERS SOLD IN BOX OF 5 UNITS
Select options This product has multiple variants. The options may be chosen on the product page
Two Man Polymer Pump SX20100 for Polyurea and Epoxy

SX20100 US SAWS Dual Component 2 Man Polyurea / Epoxy Joint Filler Pump

From: $6,400.00

  • Reduce Labor Cost With Significantly Increased Speed
  • Reduce Material Waste With Better Control of Flow
  • Allows Quick Joint Filling vs Cartridge Application
  • Production rates to 5,000 lineal joint filling feet per day (new concrete)
  • Works With Both Polyurea and Epoxy 2 Component Joint Fillers to 5,000 cps viscosity
  • Easy to Use – Inexpensive to Maintain
  • Twin 6.5 Gal Tanks Each Hold 5 Gal Joint Filler
  • Semi-Transparent Tanks To Monitor Liquid Level
  • Easy To Clean Polyethylene Tanks
  • Dispense 1:1 Ratio or 2:1 Ratio Product
  • 1/2HP 110V Electric Motor, 0-6 GPM Flow Control
  • 220V optional 1/2 HP Electric Motor Available Special Order Lead Time for use outside North America
  • Cordless Use With Optional Deep Cycle Battery & Power Invertor
PRICE INCLUDES LTL SHIPPING TO COMMERCIAL ADDRESS
Select options This product has multiple variants. The options may be chosen on the product page
SX20550 One Man Polymer Pump for Polyurea and Epoxy Joint Filler

SX20550 US SAWS Dual Component 1 Man Polyurea / Epoxy Joint Filler Pump

From: $6,750.00

  • Reduce Labor Cost - redesigned low profile 1 man use
  • Significantly Increased application Speed
  • Reduce Material Waste With Better Control of Flow
  • Allows Quick Joint Filling vs Cartridge Application
  • Works With Polyurea and Epoxy 2 Part Joint Fillers
  • Easy to Use – Inexpensive to Maintain
  • Twin 6.5 Gal Tanks Each Hold 5 Gal Joint Filler
  • Semi-Transparent Tanks To Monitor Liquid Level
  • Easy To Clean Polyethylene Tanks
  • Dispense 1:1 Ratio or 2:1 Ratio Product
  • 1/2HP 110V Electric Motor, 0-6 GPM Flow Control
  • 220V optional 1/2 HP Electric Motor Available Special Order Lead Time for use outside North America
  • Cordless Use With Optional Deep Cycle Battery & Power Invertor
PRICE INCLUDES LTL SHIPPING TO COMMERCIAL ADDRESS
Select options This product has multiple variants. The options may be chosen on the product page

Copyright 2024 by Exterior Performance Coatings LLC