Call us (630) 675-4509
Show
Filter by
Filter by
Filter by
10x Polyurea Interior Control Joint Filler | Quick Cure | Cold Temperature Apply Down To 0F
From: $52.00- Quick Back in Service
- Ideal for High Speed Application using Machine Dispensing System or for small projects easy application using twin cartridge kits and 300 ml x 300 ml cartridge kits
- High Shore Hardness for superior protection and support to joint edges
- Cold Application down to 0F
- Rapid curing
- Semi-Rigid polyurea
- Great for industrial floor
- Chemical Resistant
- Flexible in Cold Temperatures
- 100% Solids, No VOC
3003 Polyurea Slow Set Interior Control Joint Filler | Low Temp -20°F
From: $176.00- Offers load transfer across control joints for good protection of edges
- Back-in-Service "Drive-Over" in 30 to 60 minutes
- Longer working time than the 3004 Fast Set Polyurea
- 5-8 Minute Gel Time @ 77°F
- Meets USDA Requirements for incidental food contact
- Stays Flexible In Extreme Cold
- Cold Applications down to -20°F (-29°C)
- Not Sensitive To Moisture
- Self-leveling
- High Impact Resistance
- Excellent Abrasion Resistance
- Chemical Resistant
- Apply using dual component pump, 300 ml x 300 ml cartridge kit or hand application (small projects)
- 100% Solids, No VOC, No Odor
3004 Polyurea Fast Set Interior Control Joint Filler | Low Temp -20°F
From: $176.00- Quick Back-in-Service "Drive-Over" in only 20-30 minutes
- Offers load transfer across control joints for good protection of edges
- Ideal for High Speed Application using Machine Dispensing System or for small projects easy application using twin cartridge kits and 300 ml x 300 ml cartridge kits (total 21 oz or 600 ml per cartridge kit)
- Tack Free only 2-3 minutes
- Meets USDA Requirements for incidental food contact
- Stays Flexible In Extreme Cold with 300% Elongation
- Cold Applications down to -20°F (-29°C)
- Not Sensitive To Moisture
- Non-Flammable
- Self-leveling
- High Impact Resistance
- Excellent Abrasion Resistance
- Chemical Resistant
- 100% Solids, No VOC, No Odor
3246 Polyurea Flexible Expansion Joint Filler | Quick Cure | Exterior Interior | Low Temp -20°F | El...
From: $99.99- Quick 30 Min Back In-Service Joint Repair
- Extremely Flexible 600%+ Elongation for extreme conditions
- Abrasion, Chemical and Fuel Resistant
- Great for Concrete Driveways, Parking Garages, Bridges, Warehouses
- Outdoor control joint & all expansion joints
- 100% Solids, Self leveling
- Apply using High Speed Machine Application and for small projects easy application using twin cartridge kits and 300 ml x 300 ml cartridge gun
- Cold Application Down to -20°F (-26°C)
***2-3 WEEK LEAD TIME BEFORE SHIPPING. PLEASE CALL 630.675.4509 FOR SPECIFICS****
AEROSIL R 202 Fumed Silica Thickening Agent For Epoxy Concrete Crack and Joint Repair | 22 lbs (10 k...
$575.00- Great thickening agent for use with wide range of epoxy, polyurethane and other coatings
- Allows coatings to be used as great concrete crack, hole, spall and control joint repair for larger projects
- When mixed into fast acting products, makes for very quick repairs
- Many other industrial uses
- Comes in 22 lb bags
****TRUCK FREIGHT SHIPPING ONLY - MIN ORDER 5 BAGS****
Bio-Chem E330 High Performance Epoxy | 100% Solids | Aggressive Chemical Exposures | High Heat
From: $84.00- Down-Hole Tubular Coating: Id and OD coating, especially suitable for "Ruffcoat" OD treatment
- Tank Lining: High hydrocarbon chemical resistance and early return to service make Bio-Chem E330 an ideal high build tank lining
- Hopper Car Lining: excellent physical and chemical resistance properties
- Concrete Containment: Excellent physical and chemical resistance properties
Bio-Chime E390 Joint Sealant & Flexible Coating | Expansion Joints | Apply to 2″ Thick | ...
From: $80.00- Tank Chime Area: Create a permanently flexible corrosion resistant seal on chime surfaces of storage tanks and similar structures
- Expansion Joints: Use in situations where other joint compounds would soften or fail by solvent or chemical attack. High resistance to weathering and UV exposure
- Flexible Coating: High flexibility without tearing allows for a durable, chip resistant coating for general applications
Bio-Fill E457 Epoxy Repair | Void Filler to 1″ | Chemical Resistant | Horizonal ,Vertical and ...
From: $190.00- Civil Structures: Replacing concrete lost by impact or abrasion in power generation, transportation and port facilities
- Chemical Exposure: Restoration and protection of concrete exposed to chemical attack in sumps, secondary containment and similar areas
- 100% Solids
- VOC Free
- Strong yet lightweight filler
- Horizontal, Vertical and Overhead Applications
- Can be applied underwater
Dripless DC600 Dual Component Joint Filler Cartridge Gun 300ML x 300ML | Epoxy Polyurea
$85.00- Dual-Component twin cartridge gun
- Each cartridge holds either 11 oz /300 ml or 5.5 oz / 150 ml of product
- Handles both 1:1 (300 ml x 300 ml) or 2:1 (300 ml x 150 ml) mix ratio tube configuration
- Quickly Apply Polyurea, Epoxy, Urethane Products
- Easy Application Of our Polyurea repair products: 3246, 3004, 800, 830 and the Epoxy/Urethane E443
- Thrust Ratio 26:1 For Very High Viscosity Materials
- Each Pull Of Trigger Advances Cartridges By 3.5 mm
- Dual Steel Gripper Plates And Steel Push Disc Provide Durability
E139JF Flexible Joint Sealant | Expansion Joint | 100% Solids
From: $45.00- Flexible interior joint filler and sealant- Elongation 100%
- Easy Dual Cartridge Applied System
- Quick setting with light foot traffic in as little as 1 hour
- Excellent abrasion resistance
- 100% solids with 0 voc
- Low odor
- Paintable surface
E5829 Flexible Epoxy Urethane Interior Expansion and Control Joint Sealant
From: $160.00- Flexible interior joint filler - Elongation 50.4% at 70F (ASTM D-412)
- Good for both expansion and control joints
- Great for general industry applications
- Hybrid epoxy urethane 2 component formula
- 100% solids with 0 voc
- Long 30-40 minute working time
- Low odor
- Paintable surface
E5829V Vertical Interior Wall Expansion & Flexible Joint Sealant
From: $162.00- Flexible vertical interior joint filler - Elongation 67% at 70F (ASTM D-412)
- No sag formula for vertical interior wall and overhead applications
- Hybrid urethane epoxy 2 component formula
- 100% solids with 0 voc
- Low odor
- Paintable surface
E5830 Flexible Interior Expansion & Control Joint Sealant | Fast Set | Cartridge Applied
From: $60.00- Flexible interior joint filler and sealant- Elongation 100%
- Easy Dual Cartridge Applied System
- Quick setting with light foot traffic in as little as 1 hour
- Excellent abrasion resistance
- 100% solids with 0 voc
- Low odor
- Paintable surface
E621 Flexible Control Joint Filler | 100% Solids | Up to 100% Elongation | Self-Leveling
$335.00- Up to 100% Elongation
- Good resistance to steel wheel traffic
- Very resilient and tough
- Outstanding water tight bond to concrete
- Helps to prevent erosion of control joint edges
- Self leveling
- Easy to work with, cold applied, no special equipment needed
- Excellent adhesion to concrete
- USDA approved
- No VOCs
EcoBlaster Portable Pressure Washer
$1,870.00- Military-Grade Durability: The EcoBlaster is housed in a sturdy, SKB ultra-high-strength case with three handles and a rugged design
- Industrial-Strength Mobility: equipped with a durable, injection-molded pull handle and four wide-set, inline wheels for effortless maneuverability
- Flexible Water Sources: Built-in hose coupling and integrated 3-way brass valve allow you to switch easily between the 12-gallon tank and a garden hose
- Enhanced Usability: Includes a built-in auxiliary hand pump for easy priming and a removable stainless steel filter in the water tank
- Convenient Drainage: Features an exterior drain cap for straightforward water drainage and easier transportation
PRICE INCLUDES LTL SHIPPING TO COMMERCIAL ADDRESS
HDK H18 Fumed Silica Thickening Agent For Epoxy Concrete Crack and Joint Repair | (10kg) 22 lbs | W...
$475.00- Great thickening agent for use with wide range of epoxy, polyurethane and other coatings
- Allows coatings to be used as great concrete crack, hole, spall and control joint repair for larger projects
- When mixed into fast acting products, makes for very quick repairs
- Many other industrial uses
- Comes in (10 kg) 22 lb bags
****TRUCK FREIGHT SHIPPING ONLY - ONLY SELL IN LOTS OF 5 BAGS****
HyperCURE Concrete and Wood Repair Kit | Flexible 100% Elongation | Quick Cure | Easy To Apply | Rec...
$165.00- HyperCURE is designed for repairing concrete cracks, joints, spalls and damaged areas before installing coating.
- Cures quickly allowing coating installation same day
- Superior Flexibility 100% Elongation
- Outstanding Bonding
- Fast Cure - 15 to 30 min recoat
- Rapid Cure Rate For Same Day System Application
- High D70 Hardness
- High Tensile & Tear Strength
- Very Easy to Use
- Tough, Durable Epoxy Concrete and Wood Crack Repair, Hole, Spall and Control Joint Filler
Hot
Mend-Con RTU Concrete Repair | Wet Conditions & Underwater | Vertical No Sag | Quick Cure | Pai...
$540.00- Repair in Wet conditions - Apply Underwater
- Great for Pool Repairs
- High strength epoxy
- Bonds to fresh or hardened concrete, stucco, wood, metal
- No Sag No Drip Formula - perfect for Vertical, Overhead or Horizontal surfaces
- Quick Cure Dries to touch 15 minutes, paint in 1 hour and drive on it in 8 hours (temperature dependent)
- 2x as strong as most concrete - Compressive strength 8000 psi
- Easy To Apply – Convenient ready-to-use cartridge system
- Wide application temperature 40°F – 100°F
- Paintable surface
- Comes in Case of 12 Cartridges & Cartridge Gun
Mi-T-M Hot Water Pressure Washer
From: $5,070.00- Pump: Preset stainless-steel and brass unloader valve. Forged brass manifold. Thermal relief valve. Low pressure detergent injector.
- Components: Top-fired powder coated heat exchanger. No 1 or No2 diesel or kerosene fired burner (Not approved for bio-fuel)
- Miscellaneous: Temperatures rise 150F above ambient, maximum outlet temperature is 200F
- Quick connect nozzles - 0°, 15°, 25° and 40°
- 2 x 50-foot x 3/8-inch steel wire-braided high pressure hose with quick connects
- Adjustable pressure insulated dual lance
- Professional-grade insulated trigger gun with safety lock-off
- Hour Meter: Display the number of hours unit has been in operation
- Adjustable Thermostat: Operator is able to adjust outlet water temperature between 98°-248°F
PRICE INCLUDES LTL SHIPPING TO COMMERCIAL ADDRESS
NE5928 Interior Expansion & Flexible Joint Novolac Chemical Sealant
From: $152.00- Flexible joint filler - Elongation 43.4% at 70F (ASTM D-412)
- Outstanding chemical and impact resistance
- Novolac epoxy urethane hybrid formula
- Excellent adhesion 420 psi
- 100% solids with 0 voc
- Low odor
- Paintable surface
Newborn 435-XSP Dual Component Cartridge Gun 300ml x 300ml | 300 ml x 150 ml
$120.00- Dual-Component Gun 10.5 oz/300ml Cartridge in 1:1 and 2:1 Ratio 300 ml x 150 ml
- Easily Converts to 300ml x 150ml cartridges
- Quickly Apply Polyurea, Epoxy, Urethane Products
- Easy Application Of Our Twin Cartridge Joint Fillers 3246, 3004, 4034, 830, E5830
- Thrust Ratio 26:1 For Very High Viscosity Materials
- Two-piece stamped steel friction plate
- Heat treated piston rod for increased durability
- Pressure release thumb plate offers easier pressure release
- Horizontal cartridge loading
Newborn 515-SP Vertical Dual Component Applicator Cartridge Gun
$150.00- Use in Vertical Projects
- Quickly Apply Polyurea, Epoxy, Urethane Products
- Easy Application
- Easy thrust using push rod
- Snap in and out disks for quick change outs
- Cutter attachment that cuts spout of caulk tubes
- Vertical cartridge loading
Newborn 535-XSP Professional Dual Component Cartridge Gun 300ml, 150ml, 75ml
$140.00- Dual-Component Gun 10 oz/300ml Cartridge 1:1 ratio
- Multi-Ratio Easily Converts with Snap In/Snap Out Push Disks for 300ml, 150ml 75 ml cartridges
- Quickly Apply Polyurea, Epoxy, Urethane Products
- Easy Application Of Our Twin Cartridge Polyurea's 3246, 3004, 4034, 830
- Thrust Ratio 26:1 For Very High Viscosity Materials
- Extra Durable Teat Treated Piston Rod
- Precision Sintered Friction Plate
- Patented Stabilizing Plate for Extra Cartridge Support
- Easy Release Start Burst Reverse Gripping Plate
- Hammered Finished Alloy Handle With Comfort Grip
Newborn 830A30 Pnuematic Dual Component Cartridge Gun 300ml, 150ml, 75ml
$420.00- Dual-Component Pneumatic Gun 10 oz/300ml Cartridges 1:1 ratio
- 2.5" Cylinder Generates 490 lbs Nominal Thrust @100 psi
- Quick application with smooth, even product flow
- Multi-Ratio Convert to 300ml 150ml 75ml cartridges using snap-in disks
- Quickly Apply Polyurea, Epoxy, Urethane Products
- Easy Application Of Our Twin 10.5 oz/300 ml Cartridge Joint Fillers 3246, 3004, 4034, 830, E5830
- Patented stabilizing plate securely holds cartridges
- Adjustable heavy duty aluminum air regulator
- Air dump valve stops flow instantly
- Reverse air
- Quick disconnect nipple
Newborn 850A30 HD Pnuematic Dual Component Cartridge Gun 300ml, 150ml, 75ml
$690.00- Dual-Component Pneumatic Gun 10.5 oz/300ml Cartridges 1:1 ratio
- Powerful 4" cylinder generates 1,100 lbs nominal thrush @100 psi
- Quick application with smooth, even product flow
- Multi-Ratio Converts to 300ml 150ml 75ml cartridges using snap-in disks
- Quickly Apply Polyurea, Epoxy, Urethane Products
- Easy Application Of Our Twin 10.5 oz/300 ml Cartridge Joint Fillers 3246, 3004, 4034, 830, E5830
- Patented stabilizing plate securely holds cartridges
- Adjustable heavy duty aluminum air regulator
- Air dump valve stops flow instantly
- Reverse air
- Quick disconnect nipple
Sipernat 22 LS Silica Thickening Agent For Epoxy Concrete Crack and Joint Repair | 20 lbs | Evonik
$199.00- Great thickening agent for use with wide range of epoxy, polyurethane and other coatings
- Allows coatings to be used as great concrete crack, hole, spall and control joint repair for larger projects
- When mixed into fast acting products, makes for very quick repairs
- Many other industrial uses
- Comes in 20 lb bags
****TRUCK FREIGHT SHIPPING ONLY - MIN ORDER 5 BAGS****
Static Mixer For E5830 Joint Filler Dual Cartridge Concrete Repair Kit
$30.00- Replacement Mixer for E5830 Joint Sealant 300ml x 300ml cartridge kit
- Allows multiple applications from single cartridge kit
- Mixes product in correct ratio and ready to apply
- Adjust Product Flow With Simple Cutting of Nozzle End
Static Mixer Used With 21 oz Dual Cartridge Concrete Repair & Joint Filler Kits
$25.00- Replacement Mixers for ASTC Polymers' 21 oz cartridge kits
- Allows multiple applications from single cartridge kit
- Mixes product in correct ratio and ready to apply
- Select static mixer for your specific cartridge kit
- For use with dual cartridge kits 800, 830, 3003, 3004, 3246, 4034
SX20100 US SAWS Dual Component 2 Man Polyurea / Epoxy Joint Filler Pump
From: $6,750.00- Reduce Labor Cost With Significantly Increased Speed
- Reduce Material Waste With Better Control of Flow
- Allows Quick Joint Filling vs Cartridge Application
- Production rates to 5,000 lineal joint filling feet per day (new concrete)
- Works With Both Polyurea and Epoxy 2 Component Joint Fillers to 5,000 cps viscosity
- Easy to Use – Inexpensive to Maintain
- Twin 6.5 Gal Tanks Each Hold 5 Gal Joint Filler
- Semi-Transparent Tanks To Monitor Liquid Level
- Easy To Clean Polyethylene Tanks
- Dispense 1:1 Ratio or 2:1 Ratio Product
- 1/2HP 110V Electric Motor, 0-6 GPM Flow Control
- 220V optional 1/2 HP Electric Motor Available Special Order Lead Time for use outside North America
- Cordless Use With Optional Deep Cycle Battery & Power Invertor
PRICE INCLUDES LTL SHIPPING TO COMMERCIAL ADDRESS
SX20550 US SAWS Dual Component 1 Man Polyurea / Epoxy Joint Filler Pump
From: $7,200.00- Reduce Labor Cost - redesigned low profile 1 man use
- Significantly Increased application Speed
- Reduce Material Waste With Better Control of Flow
- Allows Quick Joint Filling vs Cartridge Application
- Works With Polyurea and Epoxy 2 Part Joint Fillers
- Easy to Use – Inexpensive to Maintain
- Twin 6.5 Gal Tanks Each Hold 5 Gal Joint Filler
- Semi-Transparent Tanks To Monitor Liquid Level
- Easy To Clean Polyethylene Tanks
- Dispense 1:1 Ratio or 2:1 Ratio Product
- 1/2HP 110V Electric Motor, 0-6 GPM Flow Control
- 220V optional 1/2 HP Electric Motor Available Special Order Lead Time for use outside North America
- Cordless Use With Optional Deep Cycle Battery & Power Invertor
PRICE INCLUDES LTL SHIPPING TO COMMERCIAL ADDRESS
UW601 Underwater Concrete Crack Filler Epoxy Paste Repair
$350.00- Make Repairs Underwater or on Wet Surfaces
- Concrete and Masonry
- Both Horizontal & Vertical Repairs
- Good for Cracks up to 1/8" and Thin Build Repairs
- Apply 35F - 90F
- 100% solids with 0 voc
- Low odor
UW602 Underwater Pourable Concrete Crack Filler Epoxy Repair
$325.00- Make Repairs Underwater or on Wet Surfaces
- Concrete, Cement and Masonry
- Both Horizontal & Vertical Repairs
- Good for Larger Cracks and Wide Variety of Repairs
- Easy to Use Pourable Formula
- 100% solids with 0 voc
- Low odor
Copyright 2024 by Exterior Performance Coatings LLC