No products in the cart.
Return To Shop Call us (630) 675-4509
Show
Filter by
Filter by
14” Heavy Duty Floor Scraper For Flake Removal and Stubborn Substances
$80.00- All steel construction, painted to prevent rusting
- 5' tubular steel handle
- Powder coated handle
- Removes wide variety of stubborn substances including glue and adhesives from floor
- Great for removing excess chips and flakes from basecoat prior to topcoat application on floor coating project
18″ Notched Floor Squeegee For Epoxy, Polyaspartic Floor | 4 Sizes | Case of 6
$199.00- 18" Speed Squeegee For Uniform Material Spreading
- 4 Notch Sizes: 1/8", 3/16", 1/4", 3/8"
- Comes in Economical Case of 6 Squeegees
- For Quicker and Easier Application of thicker mil (thickness) floor coating systems
- A floor coating standard, just grab it,use it, and toss it or clean it
- Steel handle socket
- Features steel frame with gray rubber solvent resistant blade
- Note: requires optional threaded handle
18″ Roller Cover For Epoxy, Urethane, Polyaspartic Coatings | 4 Sizes | Case of 24
From: $230.00- Shed resistant woven fabric for a virtually lint free finish with all paints, enamels, primers, urethanes, and epoxies.
- 2x Quicker application than using 9" roller covers
- Available in 1/8", 1/4", 3/8" and 1/2" thick nap roller covers
- Economical Case of 24 roller covers
- White Fabric Nap Cover
- Phenolic Core
18″ Wooster Big Ben Roller Frame For Quick Application of Floor Coatings
$35.00- 18" Big Ben Roll Frame
- For 18" Roller Covers, 1-1/2" Standard Or 2-1/4" Jumbo Diameter
- Lightweight Yet Strong Polypropylene Construction
- Quickly Install Or Remove The Roller Cover
- For 18 Inch roller covers with 1 1/2 Inch standard or 2 1/4 Inch jumbo Diameter and can be used with all nap heights
- Lightweight yet strong polypropylene construction
- Quickly install or remove the roller cover no hardware to adjust no tools required
18″ Wooster Pro Doo Z Cover For Epoxy, Urethane, Polyaspartic Coatings | 6/Box | 2 Sizes
From: $72.00- Shed resistant woven fabric for a virtually lint free finish with all paints, enamels, primers, urethanes, and epoxies.
- Available in 3/8" and 3/4" thick nap roller covers
- Exclusive golden pinstripe design stays resilient, resists matting.
- Green double thick polypropylene core resists water, solvents, and cracking.
- Sold in Boxes of 6 Sleeves
18″ Wooster Sherlock Wide Boy Frame For Quick Application Epoxy, Urethane, Polyaspartic Coatin...
$49.95- Sherlock Wide Boy Frame
- Holds Roller Covers 12" To 18" Long With 1-1/2" Standard Or 2-1/4" Jumbo Diameter
- Extra Strength Steel Wing Nut Design
- Rigid Tubular Steel Frame Arms
- Adjusts to hold roller covers 12 Inch to 18 Inch long with 1 1/2 Inch standard or 2 1/4 Inch jumbo Diameter and can be used with all nap heights
- Extra strength wing nut design perfect for floors or other heavy duty applications
- Rigid tubular steel frame arms and a durable fiberglass reinforced nylon body
24″ Flat Floor Squeegee For Epoxy & Polyaspartic Coatings
$50.00- 24" Speed Squeegee
- For Quicker and Easier Application of thicker mil (thickness) floor coating systems
- A floor coating standard, just grab it,use it, and toss it or clean it
- Light weight, high performance, re-usable plastic floor squeegee
- Makes installing floors a breeze
- This Squeegee is the best for installing medium and heavy bodied resins
- Note: Pole not included
24″ Notched Floor Squeegee 3/16″ Deep For Epoxy & Polyaspartic Coatings
$50.00- 24" Speed Squeegee, 3/16" Notch, Threaded Handle Adapter
- For Quicker and Easier Application of thicker mil (thickness) floor coating systems
- A floor coating standard, just grab it,use it, and toss it or clean it
- This one has our own special twist, a threaded handle adapter
- Features an aluminum frame with a red rubber solvent resistant blade
- Note: requires optional threaded handle
24″ Notched Floor Squeegee For High Build Coating Systems | 1/2″ Notches | Case of 6
$199.00- 24" Speed Squeegee For Uniform Material Spreading
- Large 1/2" notches
- Comes in a Economical Case of 6 Squeegees
- For Quicker and Easier Application of thicker mil (thickness) floor coating systems
- A floor coating standard, just grab it,use it, and toss it or clean it
- Steel handle socket
- Features steel frame with gray rubber solvent resistant blade
- Note: requires optional threaded handle
5 Quart Measuring Bucket For Epoxy, Polyaspartic, Urethane Coatings | Box of 10
From: $46.00- 5 quart size for smaller projects
- semi-transparent tub with visible quart and liter calibrations for easy mixing/measuring
- Solvent resistant, reusable and recyclable
- Sold in bundles of 10
- Also available with snap-on plastic lids
5″ Concrete Pro Hand Grinder Kit | Metabo WEV-125 Quick HT | Dust Shroud and (1) 9 Segment Whe...
$450.00- Hand-held units that are great for smaller jobs or in combination with walk-behind grinders on larger projects
- Use on concrete for cleaning, leveling high spots or uneven floor surfaces, removing glues, mastic, epoxies and other coatings
- May be connected to a variety of dust collection systems for dust containment
- The unit’s polyurethane dust shroud is long lasting and is offered in full shrouds and convertible models that flip up to allow for edge work along walls
- Kit include electric grinder, dust shroud (full or convertible) (1) 9 Segment Diamond Turbo Cup Arbor Wheel and hardware for mounting threaded diamond cup wheels, ZEC wheels, or polishing pads
7″ Concrete Pro Hand Grinder Kit | Metabo W24-230 | Dust Shroud | (2) 12 Segment Wheels | Loop...
$640.00- Hand-held units that are great for smaller jobs or in combination with walk-behind grinders on larger projects
- Use on concrete for cleaning, leveling high spots or uneven floor surfaces, removing glues, mastic, epoxies and other coatings
- May be connected to a variety of dust collection systems for dust containment
- The unit’s polyurethane dust shroud is long lasting and is offered in full shrouds and convertible models that flip up to allow for edge work along walls
- Kit include electric grinder, dust shroud (full or convertible), (2) diamond cup grinding wheels and hardware for mounting threaded diamond cup wheels, ZEC wheels, or polishing pads
9″ Roller Cover For Epoxy, Urethane, Polyaspartic Coatings | 4 Sizes | Case of 36
From: $180.00- Shed resistant woven fabric for a virtually lint free finish with all paints, enamels, primers, urethanes, and epoxies.
- Available in 1/8", 1/4", 3/8" and 1/2" thick nap roller covers
- Economical case of 36 Roller Covers
- White Fabric Nap Cover
- Phenolic Core
- Sold in Boxes of 10 Sleeves
9″ Roller Frame For Epoxy, Urethane, Polyaspartic Coatings | Case of 12
$70.00- 9" Economical Roller Frame
- Sturdy 5 Wire Cage Plastic Endcaps
- Chrome Plated 5/16" Shank
- Plastic Threaded Grip For Extension Pole Use
- Sturdy 5 wire cage and plastic endcaps
- Chrome plated 5/16 inch shank
- Plastic threaded grip for extension pole use
9″ Wooster Pro Doo Z Roller Cover For Epoxy, Urethane, Polyaspartic Coatings | 12/box | 2 Size...
From: $60.00- Shed resistant woven fabric for a virtually lint free finish with all paints, enamels, primers, urethanes, and epoxies.
- Available in 3/8" and 3/4" thick nap roller covers
- Exclusive golden pinstripe design stays resilient, resists matting.
- Green double thick polypropylene core resists water, solvents, and cracking.
- Sold in Boxes of 12 Sleeves
9″ Wooster Roller Frame For Epoxy, Urethane, Polyaspartic Coatings
$24.50- 9" Acme Heavy Duty Roll Frame
- Sturdy 5 Wire Cage Plastic Endcaps
- Chrome Plated 5/16" Shank
- Plastic Threaded Grip For Extension Pole Use
- Sturdy 5 wire cage and plastic endcaps
- Chrome plated 5/16 inch shank
- Plastic threaded grip for extension pole use
Cove Trowel for Vertical Walls | 4″ and 6″ Height | Curved Blade | Easy Application | W...
$45.00- Curved designed for smooth, professional looking cove application
- Easy to use
- Wood Handle
- Tough steel construction
Diamond Cup Concrete Grinding 7″ Wheel | Aggressive 30/40 Grit | 12 Segment | Threaded Arbor |...
$55.20- Flat profile for less tool marks on the concrete
- Softer blades for better performance on hard concrete
- 12 segments for longer life
- 30/40 grit great for both removing existing coatings and roughing up concrete for typical garage, basement and patio floor projects
- For use with 7" grinders containing a threaded arbor
Dripless DC600 Dual Component Joint Filler Cartridge Gun 300ML x 300ML | Epoxy Polyurea
$80.00- Dual-Component twin cartridge gun
- Each cartridge holds either 11 oz /300 ml or 5.5 oz / 150 ml of product
- Handles both 1:1 (300 ml x 300 ml) or 2:1 (300 ml x 150 ml) mix ratio tube configuration
- Quickly Apply Polyurea, Epoxy, Urethane Products
- Easy Application Of our Polyurea repair products: 3246, 3004, 800, 830 and the Epoxy/Urethane E443
- Thrust Ratio 26:1 For Very High Viscosity Materials
- Each Pull Of Trigger Advances Cartridges By 3.5 mm
- Dual Steel Gripper Plates And Steel Push Disc Provide Durability
Extension Pole 4′-8′ ft
$75.00- Attach 9" or 18" roller frames to this versatile pole to install beautiful floor coatings or extend reach on vertical walls
- The pole extends from 4 to 8 feet
- Roller Frames sold separately
Flat Floor Squeegee (case of 6) For Epoxy and Polyaspartic Coatings | 2 Sizes
From: $160.00- Your choice of 18" and 24" Sizes
- Comes in economical case quantity 6
- For Quicker and Easier Application of thinner mil (thickness) floor coating systems
- Steel back and steel handle socket
- Stiff Grey rubber blade
- Makes installing floors a breeze
- This Squeegee is the best for installing medium and heavy bodied resins
Gauge Rake 24 in “Sled Type” For Smooth Application Cementitious, Slurry, Thick Coatings
$50.00- Apply high build urethane and epoxy slurry, mortar and coatings and cementitious materials at a precise, predetermined uniform depth
- T-Skates adjust from 0 to 2 inches
- Thin sleds make a minimal disturbance in application
- Tool is lightweight, yet sturdy
- 24" wide
Jiffy Mixer for Epoxy, Polyaspartic, Urethane & High Viscosity Liquids | Stainless | Minimize A...
From: $24.99- Properly Mix High Viscosity Liquids (not just stir)
- Required Tool to Mix Epoxy, Urethane, Polyaspartics
- Mix Foam, Glue, Mortar, Paint, Resin, Cement
- Heavy Duty Construction for Industrial & Commercial
- Two Sets of Specialty Welded Blades
- Won't Splash or Suck Air
- Cuts Mixing Time up to 90%
- 304 Stainless Steel Construction
- Available in 3 sizes for most any mixing job
- Easy to Use with Electric Power Drill
- 100% Made in America
Looped Nap Roller Covers 9″ & 18″ | Case of 12 | For Heavy Aggregate Epoxy and Uret...
From: $85.00- Great for applying coarse aggregate epoxy coatings and urethane slurries
- Use with all texture paints
- Durable, plastic looped material applies paint and creates decorative effects in one step
- Looped vinyl material
- Phenolic core resists water, solvents, and cracking
- Available in 9" and 18" wide sizes
- Comes in Case of 12 Roller Covers
Newborn 435-XSP Dual Component Cartridge Gun 300ml x 300ml | 300 ml x 150 ml
$100.00- Dual-Component Gun 10.5 oz/300ml Cartridge in 1:1 and 2:1 Ratio 300 ml x 150 ml
- Easily Converts to 300ml x 150ml cartridges
- Quickly Apply Polyurea, Epoxy, Urethane Products
- Easy Application Of Our Twin Cartridge Joint Fillers 3246, 3004, 4034, 830, E5830
- Thrust Ratio 26:1 For Very High Viscosity Materials
- Two-piece stamped steel friction plate
- Heat treated piston rod for increased durability
- Pressure release thumb plate offers easier pressure release
- Horizontal cartridge loading
Newborn 535-XSP Professional Dual Component Cartridge Gun 300ml, 150ml, 75ml
$115.00- Dual-Component Gun 10 oz/300ml Cartridge 1:1 ratio
- Multi-Ratio Easily Converts with Snap In/Snap Out Push Disks for 300ml, 150ml 75 ml cartridges
- Quickly Apply Polyurea, Epoxy, Urethane Products
- Easy Application Of Our Twin Cartridge Polyurea's 3246, 3004, 4034, 830
- Thrust Ratio 26:1 For Very High Viscosity Materials
- Extra Durable Teat Treated Piston Rod
- Precision Sintered Friction Plate
- Patented Stabilizing Plate for Extra Cartridge Support
- Easy Release Start Burst Reverse Gripping Plate
- Hammered Finished Alloy Handle With Comfort Grip
Newborn 830A30 Pnuematic Dual Component Cartridge Gun 300ml, 150ml, 75ml
$350.00- Dual-Component Pneumatic Gun 10 oz/300ml Cartridges 1:1 ratio
- 2.5" Cylinder Generates 490 lbs Nominal Thrust @100 psi
- Quick application with smooth, even product flow
- Multi-Ratio Convert to 300ml 150ml 75ml cartridges using snap-in disks
- Quickly Apply Polyurea, Epoxy, Urethane Products
- Easy Application Of Our Twin 10.5 oz/300 ml Cartridge Joint Fillers 3246, 3004, 4034, 830, E5830
- Patented stabilizing plate securely holds cartridges
- Adjustable heavy duty aluminum air regulator
- Air dump valve stops flow instantly
- Reverse air
- Quick disconnect nipple
Newborn 850A30 HD Pnuematic Dual Component Cartridge Gun 300ml, 150ml, 75ml
$575.00- Dual-Component Pneumatic Gun 10.5 oz/300ml Cartridges 1:1 ratio
- Powerful 4" cylinder generates 1,100 lbs nominal thrush @100 psi
- Quick application with smooth, even product flow
- Multi-Ratio Converts to 300ml 150ml 75ml cartridges using snap-in disks
- Quickly Apply Polyurea, Epoxy, Urethane Products
- Easy Application Of Our Twin 10.5 oz/300 ml Cartridge Joint Fillers 3246, 3004, 4034, 830, E5830
- Patented stabilizing plate securely holds cartridges
- Adjustable heavy duty aluminum air regulator
- Air dump valve stops flow instantly
- Reverse air
- Quick disconnect nipple
Phenolic Core Roller Covers 9″ | Case of 12
$67.00- For spreading and leveling mastics, anti-slip floor coatings, and other heavy coatings
- Professional phenolic roller resists water and solvents
- Available in 9" size
- Comes in a case of 12 Roller Covers
Spike Shoes – Flexible | Walk on Wet Epoxy, Polyaspartic, Urethane Floor Coatings
$175.00- Deluxe Polypropylene spiked shoes
- Flexible for easier walking
- Allows you walk on wet surface without damage to floor coating
- 3/4" inch spikes
- Quick Release Snap-Buckle Strap
- Round Tip for snug fit
- They are a must when installing epoxy, polyaspartic and urethane flooring systems
- Sold by the pair
- Comes in 3 shoe sizes
Spike Shoes | Economical | Walk on Wet Epoxy, Polyaspartic, Urethane Floor Coatings
$34.99- A must for installing epoxy and polyaspartic floors
- Walk on wet surface without damage to floor coating
- 3/4" spikes are firmly attached to a flexible plastic sole with nylon straps (user needs to install the 11 spikes to the shoe platform prior to use)
- Use with Street Shoes or steel toe safety shoes
- Easy to adjust straps at toe and ankle
- Sold by the pair
- One size fits all
Spike Shoes | Walk on Wet Epoxy, Polyaspartic, Urethane Floor Coatings
$45.99- Polypropylene spiked shoes
- Allows you walk on wet surface without damage to floor coating
- 3/4" inch spikes come with a Quick-release snap-buckle strap system
- They are a must when installing epoxy, polyaspartic flooring systems
- Sold by the pair
- One size fits all
Spiked Roller Cover Metal (Porcupine) 9″ and 18″ Release Trapped Gas Bubbles
From: $195.00- Sturdy metal construction
- 13/16" Long Metal spikes
- Available in both 9" and 18" sizes (does not include handle)
- Helps remove gas bubbles that can form in floor coatings for a variety of reasons
Spiked Roller Cover Plastic (Porcupine) 9″ and 18″ Release Trapped Gas Bubbles
From: $115.00- Sturdy plastic construction
- Long 13/16" plastic spikes
- Available in both 9" and 18" sizes (does not include handle)
- Helps remove gas bubbles that can form in floor coatings for a variety of reasons
Static Mixer For E5830 Joint Filler Dual Cartridge Concrete Repair Kit
$30.00- Replacement Mixer for E5830 Joint Sealant 300ml x 300ml cartridge kit
- Allows multiple applications from single cartridge kit
- Mixes product in correct ratio and ready to apply
- Adjust Product Flow With Simple Cutting of Nozzle End
Static Mixer Used With 21 oz Dual Cartridge Concrete Repair & Joint Filler Kits
$25.00- Replacement Mixers for ASTC Polymers' 21 oz cartridge kits
- Allows multiple applications from single cartridge kit
- Mixes product in correct ratio and ready to apply
- Select static mixer for your specific cartridge kit
- For use with dual cartridge kits 800, 830, 3003, 3004, 3246, 4034
SX-20005-5 Polyethylene Tank 6.5 Gallons for US SAWS Polyurea Joint Filler Pumps
$100.00- Oversize 6.5 Gallon Tanks
- Sturdy Polyethylene Construction
- See Through Design For Quick Visual of Fluid Levels
- For Use with US SAWS One Man and Two Man Pumps
SX-20005-6 Polyethylene Tank Cover 6.5 Gallon for US SAWS Polyurea Joint Filler Pumps
$39.00- Protect and Secure Polyurea & Epoxy in 6.5 Gallon Polyethylene Tanks
- For Use with US SAWS One Man and Two Man Pumps
SX-20017 Tank Warmers For Cold Weather for US SAWS Polyurea Joint Filler Pumps
$240.00- Good for cold weather projects
- Protects Polyurea from cold temperatures
- One Warmer for Each Tank
- For Use with US SAWS One Man and Two Man Pumps
SX-20111 Static Mixer Retaining Nut & Cap for US SAWS Polyurea Joint Filler Pumps
$33.00- Retaining Nut Secures Static Mixer in Place
- Static Mixer Cap protects End from Contamination during brief stopping periods
- For Use with US SAWS One Man and Two Man Pumps
SX-20116 Manifold With Grease Fittings for US SAWS Polyurea Joint Filler Pumps
$196.00- Replacement Manifold for US SAWS Dual Component Pumps
- Complete with fittings, new retainer nut and a night cap
- For Use with US SAWS One Man and Two Man Pumps
SX-20201 Replacement Pump for US SAWS Polyurea Joint Filler Pumps
$476.00- Replacement Pump For US SAWS One Man and Two Man Pumps
SX-21000 Polyurea Pump 2:1 Ratio Conversion Kit for US SAWS Polyurea Joint Filler Pumps
$134.00- Quickly Convert Dual Component Pump to 2:1 Mix Ratio Products
- For Use with US SAWS One Man and Two Man Pumps
SX-21023 Power Inverter 1200W for US SAWS Polyurea Joint Filler Pumps
$392.00- Allows Cordless Operation When Stable Power Source Unavailable
- Easy Operation in the Field
- Works with Group 27 or larger DEEP CYCLE Marine or RV battery
- For Use with US SAWS One Man and Two Man Pumps
SX20100 US SAWS Dual Component 2 Man Polyurea / Epoxy Joint Filler Pump
From: $6,400.00- Reduce Labor Cost With Significantly Increased Speed
- Reduce Material Waste With Better Control of Flow
- Allows Quick Joint Filling vs Cartridge Application
- Production rates to 5,000 lineal joint filling feet per day (new concrete)
- Works With Both Polyurea and Epoxy 2 Component Joint Fillers to 5,000 cps viscosity
- Easy to Use – Inexpensive to Maintain
- Twin 6.5 Gal Tanks Each Hold 5 Gal Joint Filler
- Semi-Transparent Tanks To Monitor Liquid Level
- Easy To Clean Polyethylene Tanks
- Dispense 1:1 Ratio or 2:1 Ratio Product
- 1/2HP 110V Electric Motor, 0-6 GPM Flow Control
- 220V optional 1/2 HP Electric Motor Available Special Order Lead Time for use outside North America
- Cordless Use With Optional Deep Cycle Battery & Power Invertor
PRICE INCLUDES LTL SHIPPING TO COMMERCIAL ADDRESS
SX20550 US SAWS Dual Component 1 Man Polyurea / Epoxy Joint Filler Pump
From: $6,750.00- Reduce Labor Cost - redesigned low profile 1 man use
- Significantly Increased application Speed
- Reduce Material Waste With Better Control of Flow
- Allows Quick Joint Filling vs Cartridge Application
- Works With Polyurea and Epoxy 2 Part Joint Fillers
- Easy to Use – Inexpensive to Maintain
- Twin 6.5 Gal Tanks Each Hold 5 Gal Joint Filler
- Semi-Transparent Tanks To Monitor Liquid Level
- Easy To Clean Polyethylene Tanks
- Dispense 1:1 Ratio or 2:1 Ratio Product
- 1/2HP 110V Electric Motor, 0-6 GPM Flow Control
- 220V optional 1/2 HP Electric Motor Available Special Order Lead Time for use outside North America
- Cordless Use With Optional Deep Cycle Battery & Power Invertor
PRICE INCLUDES LTL SHIPPING TO COMMERCIAL ADDRESS
Copyright 2024 by Exterior Performance Coatings LLC