Pro Starter Pack – All Surface Graffiti Removal

TECHNICAL DATA

BARE BRICK:

Composition
Bare Brick, Stone & Masonry Graffiti Remover is a premium aromatic liquid blended from natural alcohols, citrus oils and water soluble surfactants. BBSM is designed to
penetrate and fully dissolve graffiti and other marks, then rinse away easily from these surfaces.

Properties
Color: Orange Brown liquid.
Odor: Citrus solvent odor.
PH: ~ 12-14
Storage: Store in a cold dry place away from heat orflames.
Shelf Life: Approximately 2 years but up to 5 years in unopened container.
Precaution: Flammable.
DOT Markings:

FELTPEN FADEOUT:

Composition
FELTPEN FADEOUT is a concentrated blend of surfactants, foaming agents, alkaline salts, and sodium hypochlorite designed to draw inks, pigments and dye stains out of surfaces. When diluted with water it acts as a powerful cleaning agent and will attack and bleach all
types of soilage.

Properties
Color: Pale, yellow-green thick liquid.
Odor: Chlorine odor.
PH: ~ 12
Storage: Store in a cold dry place away from heat or flames.
Shelf Life: Approximately 2 years.
Precaution: Corrosive.
DOT Markings: UN1719, Caustic Alkali Liquid, n.o.s.,
(Sodium Hypochlorite, Sodium Hydroxide),8, PG II

SENSITIVE SURFACE REMOVER:

Composition
SSR is a premium blend of natural alcohols and citrus oils designed to dissolve and suspend graffiti and other marks so they can be wiped away with a damp toweling cloth.

Properties
Color: Pink or clear liquid.
Odor: Citrus odor.
PH: 7.8
Storage: Store in a cold dry place away from heat or flames.
Shelf Life: 5 years or longer in unopened container.
Precaution: Flammable.
DOT Markings: UN1993, Flammable liquid, n.o.s.
(Terpene Hydrocarbon, Ethyl Alcohol), 3, PG III

Product Use Instructions 

For Full Application Details please see each product page and go to Application Tab.

Pages:

• Bare Brick, Stone and Masonry Graffiti Remover
• Sensitive Surface Graffiti Remover
• Feltpen Fadeout
• Graffiti Safewipes Handy Pack

Cold Weather makes everything work slower including Graffiti Removal.  Here are some tips for working in the cold.  

When winter temperatures sink into the 30°’s and 40°’s, graffiti tags take much longer to dissolve. Dwell times (how long you leave the graffiti remover on the tag) need to be 2-3 times longer to achieve the same results, and it’s often helpful to leave the graffiti removal product on much longer than that. It also helps to keep your graffiti removal product indoors prior to use or in your heated vehicle before applying, so they are at or close to room temperature when you’re ready to use them.

As always, quickest removal is using a hot water pressure washer or steam cleaner.  Sometimes you spray a wall down first in order to heat up a section of graffiti before removing it. If you don’t have a hot water power washer, you can fill up a bucket with hot water, leaving your graffiti remover in it so that it warms up before use.  Graffiti Remover is always more effective when it is not cold.

During the winter months you may want to apply Bare Brick Stone & Masonry Graffiti Remover several times and then leave Transgel on over that for hours or overnight. This will keep it wet for much longer and while it’s wet it’s working. Transgel eats through all the thicker bits of graffiti crinkling it up, while Bare Brick penetrates and dissolves it from behind. Of course, pressure washing in freezing conditions is a tricky exercise and we recommend reserving larger projects for the spring if that is an option.

For signs, trucks, trailers, and other Sensitive Surfaces, you may need to leave Sensitive Surface Graffiti Remover on for several minutes before coming back to agitate and wipe away. Sometimes lightly abrading the surface with a soft scourer between coats will help the remover penetrate and begin dissolving it faster.

Good luck and Stay Warm this winter!