E690PB Lead Out™ Lead Paint Remover | Safely Neutralize & Remove Lead Paint | 100% American-Grown Soybean Technology
- Safely neutralizes lead content to below EPA standards
- Encapsulates lead in to a non-hazardous waste
- Limits lead dusting during removal
- Easily applied gel formula
- Low, non-offensive odor
Overview
- Description
- Additional Information
- Specs
- Coverage Rate
- Application
E690PB Lead Out™ Lead Paint Remover | Safely Neutralize & Remove Lead Paint | 100% American-Grown Soybean Technology
When dealing with lead based paint, take the hazards out of removing and disposing of it with E690PB Lead Out™ Lead Paint Remover! This technology combines a stripper made from 100% American-grown soybeans with a revolutionary Molecular Bonding System.
When this Molecular Bonding System is applied to lead based paint, it neutralizes the lead into a non-hazardous compound that tests well below the EPA’s lead-safe limits. All of this provides a simple and affordable way to safely remove lead paint.
WHERE IS E690PB Lead Out™ USED?
- Metal
- Concrete
- Masonry
- Wood
- Any Painted or Coated Surface
WHY E690PB Lead Out™?
- Safely neutralizes lead content to below EPA standards
- Encapsulates lead in to a non-hazardous waste
- Limits lead dusting during removal
- Easily applied gel formula
- Low, non-offensive odor
- Non-Caustic
| Size |
|---|
Technical Data
| Freezing Point | <32F |
| Boiling Point | >300F |
| Volume Solids | N/A |
| Evaporation Rate | <1 |
| Appearance | Gold/Yellow, heavy viscosity liquid |
| Odor | Mild |
| Physical State | Gel |
| pH | 8.1 |
| Flash Point | >200F (93.3C) |
| VOC | 49.5% 578.96 g/L, 4.84 lbs/gal |
| Vapor Pressure | < .5mmHg @20°C |
| Application Temperature | Suggested Application Range: 55-85°F |
COVERAGE RATE
Horizontal Applications: 125-200 Square Feet Per Gallon
Vertical Applications: 75 Square Feet Per Gallon
APPLICATION TEMPERATURE:
It is best to apply the product in temperatures above 55°F and below 85°F
Application Instructions
Test Area
Due to variances in surfaces and conditions, always test in a small, inconspicuous area before using on complete project.
Mixing
Mix Lead Out Activation Powder package thoroughly with Lead Out Lead Paint Remover Gel. Once mixed, the product will only
work for 24 hours to convert lead particles in the paint.
Application
Apply a medium to thick layer on surface using a brush or similar tool. Applying too thin will cause Lead Out to dry out before removal is complete. Use a scraper to check if the coating is softened down to the surface. When the coating is completely softened, remove with a scraper. Collect the converted lead coating(s) in a suitable container for disposal.
Clean Up
Use E700DG Degreaser or water and a scrub brush, mop, or power washer to clean remaining thin residue. Remove excess coating(s) and Leadout before using a power washer for final cleaning. Allow surface to dry before further preparations.
Usage Tips from the Pros
1. For large application areas, use a professional airless sprayer or a 4-stage HVLP sprayer.
2.Testing kits for lead content are generally available at hardware stores.
3.When used outdoors, cover with a 2mil or thicker plastic to help keep Lead Out wet and working.
4. For heavy lead content, contact us for extra activation powder
Precautions
Concrete surfaces may darken with use of E690PB. Protect plants and vegetation with a plastic drop cloth. Always use care to prevent overspray from getting on surfaces other than the one being prepped or cleaned.
In case of contact with eyes, flush thoroughly with water. Use in a well-ventilated area to avoid respiratory irritation, drowsiness or dizziness. Avoid prolonged contact with skin. Wear safety glasses to avoid splatters causing eye irritation, and chemical-resistant gloves to protect from skin irritation and dryness, etc.
Wear work-appropriate shoes.
Danger
Causes skin irritation. Causes serious eye irritation. May cause respiratory irritation or may cause drowsiness and dizziness. May be harmful if swallowed. May cause reproductive harm. Keep out of reach of children.
Warning
This product can expose you to chemicals including n-methyl-2-pyrrolidone, which is known to the state of California to cause
birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Safe for Use On: Concrete, Masonry, Wood or Metal
NOTICE TO BUYER: DISCLAIMER OF WARRANTIES AND LIMITATIONS ON OUR LIABILITY We warrant that our products are manufactured to strict quality assurance specifications and that the information supplied by us is accurate to the best of our knowledge. Such information supplied about our products is not a representation or a warranty. It is supplied on the condition that you shall make your own tests to determine the suitability of our product for your particular purpose. Any use or application other than recommended herein is the sole responsibility of the user. Listed physical properties are typical and should not be construed as specifications. NO WARRANTY IS MADE, EXPRESSED OR IMPLIED, REGARDING SUCH OTHER INFORMATION, THE DATA ON WHICH IT IS BASED, OR THE RESULTS YOU WILL OBTAIN FROM ITS USE. N0 WARRANTY IS MADE, EXPRESSED OR IMPLIED, THAT OUR PRODUCT SHALL BE MERCHANTABLE OR THAT OUR PRODUCT SHALL BE FIT FOR ANY PARTICULAR PURPOSE. NO WARRANTY IS MADE THAT THE USE OF SUCH INFORMATION OR OUR PRODUCT WILL NOT INFRINGE UPON ANY PATENT. We shall have no liability for incidental or consequential damages, direct or indirect. Our liability is limited to the net selling price of our product or the replacement of our product, at our option. Acceptance of delivery of our product means that you have accepted the terms of this warranty whether or not purchase orders or other documents state terms that vary from this warranty. No representative is authorized to make any representation or warranty or assume any other liability on our behalf with any sale of our products. Our products contain chemicals that may CAUSE SERIOUS PHYSICAL INJURY. BEFORE USING, READ THE MATERIAL SAFETY DATA SHEET AND FOLLOW ALL PRECAUTIONS TO PREVENT BODILY HARM.
You may also like…
-

E605Pro with Safenol™ | Multipurpose Coatings Remover | Paints | Varnish | Enamel | Urethanes | Some Epoxies | Low Odor | Eco-Friendly | Non-Caustic
- Removes Acrylic Enamel Latex Lead* Paints, Urethanes, Some Epoxies
- Up to 3 Times the Coverage of Traditional Strippers
- Single Application
- Horizontal and Vertical Applications
- Environmentally Friendly
-

E700DG Emerge Degreaser Super-Concentrate | Removes Oil Grease Dirt Grime From Concrete | Wood | Vinyl | Metal | Painted Walls | Asphalt | Low-VOC | Non-Caustic
- Removes Oil, Grease, Dirt & Grime From Wide Range of Surfaces
- Super-Concentrated & Easy to Dilute
- Vertical & Horizontal Application
- Low, Non-Offensive Odor
- Non-Caustic
-

E500MR BEAN-e-doo Mastic Remover | US Grown Soybean Technology | Remove Asbestos Black Mastic Carpet & Tile Adhesives | Low VOC | Low Odor
- Safely Remove Asbestos, Mastics, Adhesives
- Easy-to-Use
- Fast Acting
- Low, Non-Offensive Odor
- Non-Caustic

