E6470 Textured Primer | 100% Acrylic Latex | High Build Elastomeric | Concrete Masonry Stucco Wood

COVERAGE RATE

Smooth: 50-60 Square Feet Per Gallon

Stucco: 40-60 Square Feet Per Gallon

Heavy Textured: 40-50 Square Feet Per Gallon

APPLICATION TEMPERATURE: Do not apply when temperatures are below 50°F or expects to drop below 40°F within a 24 hour period. If fog or rain is expected within 24 hours, DO NOT APPLY.

APPLICATION INSTRUCTIONS FOLLOW THESE SIMPLE APPLICATION STEPS

Surface Preparation:

Cleaning and General Preparation: Loose or peeling coatings must be removed by sand or water blasting. All loose or defective concrete or masonry and any surface contaminates such as dirt, oils, mildew, chalk and efflorescence which may adversely affect product adhesion and performance must be removed.

Application Instructions:

Apply by brush, roller or spray. MIX THOROUGHLY PRIOR TO USE. For best mixing results, recommend a Jiffy style drill mixer. CAUTION: Do not apply when temperatures are below 50°F or expected to drop below 40°F within a 24 hour period or when

fog or rain is anticipated.  DO NOT THIN

When spraying requires a heavy duty sprayer designed for textured coatings.

Roller: Use 1/4" nap lint free roller cover

Smooth: 50-60 Square Feet Per Gallon

Stucco: 40-60 Square Feet Per Gallon

Heavy Textured: 40-50 Square Feet Per Gallon

Masonry: 

Surface must be free from dirt, dust, previous loose material, efflorescence, mildew, form oils, and release agents. Form oils and release agents must be sandblasted or wire brushed off.

Wood:

Remove all loose material and dirt. Smoothly finished wood should be sanded first.

Drying Time: 

Dries to touch in 30 minutes. Wait 24 hours before topcoating.

Limitations: 

Do not apply over mildew Not recommended for below grade (NOTE: Retaining walls, planter boxes etc. must be waterproofed on the

backside with a below grade waterproofing type material prior to back filling). Not recommended for application to frost covered surfaces. Not recommended for application if rain is expected within 24 hours. Do not apply when temperatures are below 50°F or expects to drop below 40°F within a 24 hour period or when fog or rain is in the 24 hour forecast.

Efflorescence: 

Must be removed prior to application.  Recommend using our Restore-N-Prep  OR by washing with a 10% Muriatic Acid Solution.

Mildew:

Mildew is a fungus, brown, black, grey or white in color which will rapidly grow through any coating applied over it. A solution of

50% household bleach and 50% water will kill the mildew. Rinse thoroughly. See precautions on bleach label before using.

Clean Up: 

Clean tools and hands with warm soapy water and rinse thoroughly.

Maintenance:

E6470 is NOT intended to be an exposed surface film. Refer to the topcoat technical bulletin for maintenance directions.

Safety, Health & Environmental Recommendations: 

Use appropriate personal protective equipment. Consult label or material safety data sheet available in the Document Library.

NOTICE TO BUYER: DISCLAIMER OF WARRANTIES AND LIMITATIONS ON OUR LIABILITY We warrant that our products are manufactured to strict quality assurance specifications and that the information supplied by us is accurate to the best of our knowledge. Such information supplied about our products is not a representation or a warranty. It is supplied on the condition that you shall make your own tests to determine the suitability of our product for your particular purpose. Any use or application other than recommended herein is the sole responsibility of the user. Listed physical properties are typical and should not be construed as specifications. NO WARRANTY IS MADE, EXPRESSED OR IMPLIED, REGARDING SUCH OTHER INFORMATION, THE DATA ON WHICH IT IS BASED, OR THE RESULTS YOU WILL OBTAIN FROM ITS USE. N0 WARRANTY IS MADE, EXPRESSED OR IMPLIED, THAT OUR PRODUCT SHALL BE MERCHANTABLE OR THAT OUR PRODUCT SHALL BE FIT FOR ANY PARTICULAR PURPOSE. NO WARRANTY IS MADE THAT THE USE OF SUCH INFORMATION OR OUR PRODUCT WILL NOT INFRINGE UPON ANY PATENT. We shall have no liability for incidental or consequential damages, direct or indirect. Our liability is limited to the net selling price of our product or the replacement of our product, at our option. Acceptance of delivery of our product means that you have accepted the terms of this warranty whether or not purchase orders or other documents state terms that vary from this warranty. No representative is authorized to make any representation or warranty or assume any other liability on our behalf with any sale of our products. Our products contain chemicals that may CAUSE SERIOUS PHYSICAL INJURY. BEFORE USING, READ THE MATERIAL SAFETY DATA SHEET AND FOLLOW ALL PRECAUTIONS TO PREVENT BODILY HARM.