Vinyl Paint Chips 1/4″ BY THE LB (11 lb Min) FOR SMALL PROJECTS For Epoxy, Polyaspartic, Urethane Coatings

1/4″ Vinyl Chips (By the LB For Small Projects) To Decorate Floor Coating Systems

Our 1/4″ color vinyl color chips are designed to enhance the look of of seamless epoxy, polyurea, polyaspartic and urethane resin-based flooring systems.  Sold by the lb (min order 11 lbs) allow for use on small projects without waste buying larger quantities.  They can be used on commercial, residential and industrial floor projects.  Choose from  10 blended color 1/4″ vinyl chip colors to create a great decorative look or create your own custom blend.  The chart for each of the 12 color blends below shows the percentage of each of the individual colors that make up that blend.

Chips are broadcast into a colored epoxy, polyurea, polyaspartic or urethane basecoat.  When the coating is tack free and ready to be re-coated, excess chips are cleaned off the surface and one or two coats of a clear topcoat are applied.  How thick or how many coats of a topcoat required depend on the amount of flakes used. Chips are sold by the lb (min order 10 lbs).

How much to use depends on the look desired.  The more chips used the less you see of the base coat color and more you see the chips.  For a partial broadcast, you can apply chips at the rate of 20 sq’ to 200 sq’ of floor coating per lb of chips.  For full broadcast to refusal it takes substantially more, 5-7 sq’/lb.  Full broadcast means chips are applied so heavy that the coating can’t absorb anymore and they are sitting on the surface

You can mix and match different flake blends on a single order for example:  11 lb total order can be 5 lbs Wombat, 4 lbs Nightfall and 2 lbs Shoreline each packaged in a separate bag and then you can mix them together as you wish at the jobsite.

Note:  Flake orders are custom made at the time of order placement. Due to this, flake orders are NOT eligible for return. If you are not certain that you will like the selected flakes, please feel free to contact us to arrange a small sample.

Why 1/4″ Vinyl Chip;s?

• Add a decorative look to any epoxy, polyurea, polyaspartic, urethane flooring project
• 10 Different Pre-Mixed Color Blends to Choose From
• Mix & Match Different Blends together as Part of Your Total Order to Create Your Own Custom Look
• Hide sub-surface imperfections
• Optimal flexibility and strength
• Colorfast, UV stable pigments
• Low sound / noise deadening qualities

Where are 1/4″ Vinyl Chips Used?

Banquet Halls Basements Bathrooms Bowling Alleys Butcher Shops Churches Clean Rooms Commercial Kitchens Corridors Dog Kennels Food Processing Plants Garage Floors Greenhouses Grocery Stores Hallways Hospitals Laboratories Laundromats Offices Pool Decks Restaurants Restrooms Retail Stores Schools Showrooms Stadium Hallways Sunrooms Veterinary Clinics Zoos