E605Pro with Safenol™ | Multipurpose Coatings Remover | Paints | Varnish | Enamel | Urethanes | Some Epoxies | Low Odor | Eco-Friendly | Non-Caustic

Technical Data

Ingredients: Safenol™, Di Basic Ester, Alcohols (C-19, ethoxylated)

COVERAGE RATE

Horizontal Applications: 125-200 Square Feet Per Gallon

Vertical Applications: 75 Square Feet Per Gallon

APPLICATION TEMPERATURE:

It is best to apply the product in temperatures above 55°F and below 85°F

Application Instructions

Test Area

Due to variances in surfaces and conditions, always test in a small, inconspicuous area before using on complete project.

Application

SHAKE WELL. Apply a thick layer of E605 Safenol PRO by pouring, brushing, squeegee or commercial airless sprayer. Applying too thin will cause Safenol PRO to dry out before removal is complete. Use a scraper to check if the coating is softened down to the surface. If not, wait longer and recheck. When the coating is completely softened, remove with a scraper.

Clean Up

Use E700DG Degreaser or water and a scrub brush, mop, or power washer to clean remaining thin residue. Remove excess coating(s) and E605 before using a power washer for final cleaning. Allow surface to dry before further preparations.

Usage Tips from the Pros

• For tough coatings or numerous layers, use a notched 1/2" squeegee or 1/4" gauge rake. Square footage will be greatly reduced.
• When using outdoors, cover with a 2 mil or thicker plastic to keep E605 wet and working.

Precautions

Protect plants and vegetation with a plastic drop cloth. Store above 32°F, Safenol PRO will freeze. Wear safety glasses to avoid splatters causing eye irritation, chemical-resistant gloves to protect from skin irritation and dryness, and work-appropriate shoes.

Caution

Causes mild skin irritation. Causes eye irritation. May be harmful if swallowed. Keep out of reach of children.

Safe for Use On: Concrete, Masonry, Wood, Metal and fiberglass (fiberglass must be attended)

DO NOT USE ON: PVC, Drywall, Limestone, Plastic, Veneer, Terrazzo Tile or Rubber

NOTICE TO BUYER: DISCLAIMER OF WARRANTIES AND LIMITATIONS ON OUR LIABILITY We warrant that our products are manufactured to strict quality assurance specifications and that the information supplied by us is accurate to the best of our knowledge. Such information supplied about our products is not a representation or a warranty. It is supplied on the condition that you shall make your own tests to determine the suitability of our product for your particular purpose. Any use or application other than recommended herein is the sole responsibility of the user. Listed physical properties are typical and should not be construed as specifications. NO WARRANTY IS MADE, EXPRESSED OR IMPLIED, REGARDING SUCH OTHER INFORMATION, THE DATA ON WHICH IT IS BASED, OR THE RESULTS YOU WILL OBTAIN FROM ITS USE. N0 WARRANTY IS MADE, EXPRESSED OR IMPLIED, THAT OUR PRODUCT SHALL BE MERCHANTABLE OR THAT OUR PRODUCT SHALL BE FIT FOR ANY PARTICULAR PURPOSE. NO WARRANTY IS MADE THAT THE USE OF SUCH INFORMATION OR OUR PRODUCT WILL NOT INFRINGE UPON ANY PATENT. We shall have no liability for incidental or consequential damages, direct or indirect. Our liability is limited to the net selling price of our product or the replacement of our product, at our option. Acceptance of delivery of our product means that you have accepted the terms of this warranty whether or not purchase orders or other documents state terms that vary from this warranty. No representative is authorized to make any representation or warranty or assume any other liability on our behalf with any sale of our products. Our products contain chemicals that may CAUSE SERIOUS PHYSICAL INJURY. BEFORE USING, READ THE MATERIAL SAFETY DATA SHEET AND FOLLOW ALL PRECAUTIONS TO PREVENT BODILY HARM.