EXPERT Next Generation Wood Stripper Pro

COVERAGE RATE

Coverage varies depending on coating thickness and application method.

Approximately 50-200 sq ft per gallon depending on mixture thickness.

APPLICATION INSTRUCTIONS FOLLOW THESE SIMPLE APPLICATION STEPS

Preparation

• Cover nearby plants, grass, and surrounding surfaces using plastic sheeting
• Wear appropriate full PPE during application
• Test a small inconspicuous area before full application

Mixing

EXPERT Wood Stripper Pro may be adjusted to different consistencies depending on application method:

• Gel / Paste consistency: Mix with drill mixer on high speed for approximately 1 minute until thickened
• Sprayer application: Mix briefly (about 10 seconds)
• If mixture becomes too thick, allow product to rest 30 minutes to thin naturally

Application

Apply using:

• Brush
• Roller
• Sprayer (remove filters if spraying)

For best performance:

• Apply between 50°F and 100°F
• Lower temperatures increase dwell time
• Multiple spray applications may be required for heavy coatings

Dwell Time

Allow product to dwell 30 minutes to several hours depending on coating thickness.

• Product must remain wet while working
• In direct sunlight, cover with plastic to prevent premature drying
• Test periodically by scraping to determine when coatings release easily

Removal

Once coatings lift:

• Remove with pressure washer or scraper
• Work from bottom upward
• Use approximately a 45° spray angle when pressure washing

Some surfaces may require:

• A second application
• Light brushing with a wire brush while surface is still wet

Rinse & Clean-Up

• Rinse surface and surrounding areas thoroughly with water
• Collect removed coatings and dispose according to local regulations
• Do not rinse waste into soil, drains, or waterways
• Clean all tools and equipment with soap and water immediately after use

Warnings 

Always wear PPE when using product including: 

• Chemical-resistant gloves
• Long sleeves and long pants
• Closed-toe footwear
• Protective spray suit or coveralls
• Head covering
• NIOSH-approved respirator

Use only outdoors or in well-ventilated environments. Wash skin thoroughly after handling and launder contaminated clothing separately.

Lead Paint Warning

Structures built before 1978 may contain lead-based paint. Disturbing these coatings can release hazardous lead dust.

Follow EPA guidelines before beginning restoration projects involving older structures.

First Aid

If inhaled: Move to fresh air and seek medical attention if irritation persists.
If swallowed: Do not induce vomiting. Call poison control immediately.
If on skin: Rinse with water for at least 15 minutes and remove contaminated clothing.
If in eyes: Rinse continuously for 15–20 minutes and seek medical attention if irritation persists.

NOTICE TO BUYER: DISCLAIMER OF WARRANTIES AND LIMITATIONS ON OUR LIABILITY We warrant that our products are manufactured to strict quality assurance specifications and that the information supplied by us is accurate to the best of our knowledge. Such information supplied about our products is not a representation or a warranty. It is supplied on the condition that you shall make your own tests to determine the suitability of our product for your particular purpose. Any use or application other than recommended herein is the sole responsibility of the user. Listed physical properties are typical and should not be construed as specifications. NO WARRANTY IS MADE, EXPRESSED OR IMPLIED, REGARDING SUCH OTHER INFORMATION, THE DATA ON WHICH IT IS BASED, OR THE RESULTS YOU WILL OBTAIN FROM ITS USE. N0 WARRANTY IS MADE, EXPRESSED OR IMPLIED, THAT OUR PRODUCT SHALL BE MERCHANTABLE OR THAT OUR PRODUCT SHALL BE FIT FOR ANY PARTICULAR PURPOSE. NO WARRANTY IS MADE THAT THE USE OF SUCH INFORMATION OR OUR PRODUCT WILL NOT INFRINGE UPON ANY PATENT. We shall have no liability for incidental or consequential damages, direct or indirect. Our liability is limited to the net selling price of our product or the replacement of our product, at our option. Acceptance of delivery of our product means that you have accepted the terms of this warranty whether or not purchase orders or other documents state terms that vary from this warranty. No representative is authorized to make any representation or warranty or assume any other liability on our behalf with any sale of our products. Our products contain chemicals that may CAUSE SERIOUS PHYSICAL INJURY. BEFORE USING, READ THE MATERIAL SAFETY DATA SHEET AND FOLLOW ALL PRECAUTIONS TO PREVENT BODILY HARM.

What is Wood Stripper Pro?

Wood Stripper Pro is a professional-grade coating remover designed to strip multiple layers of paint, stain, and coatings from wood and other building materials. It is engineered for demanding restoration projects where strong, reliable removal is required.

What surfaces can Wood Stripper Pro be used on?

Wood Stripper Pro is a multi-surface coating remover that works on:

• Wood
• Concrete
• Brick
• Stone
• Metal
• Tile
• Fiberglass
• Composite materials

This makes it ideal for contractors handling multiple surface types with one product.

What does Wood Stripper Pro remove?

Wood Stripper Pro is designed to remove:

• Multiple layers of paint
• Oil- and water-based stains
• Existing coatings and finishes

It is especially effective for heavy-duty coating removal projects where traditional strippers may struggle.

Can it remove multiple layers in one application?

Yes. When used correctly, Wood Stripper Pro is formulated to break down multiple layers of coatings in a single application, reducing labor time and improving efficiency.

Does Wood Stripper Pro require neutralization?

No. Unlike many caustic stripping systems, no neutralization is required. After use, surfaces can simply be rinsed clean with water, simplifying the process.

How do you know when the stripper is ready to remove?

Wood Stripper Pro features color-change technology:

• Goes on white
• Turns clear when coatings are ready to be removed

This helps eliminate guesswork and prevents over-processing.

How is Wood Stripper Pro applied?

It can be applied using:

• Brush
• Roller
• Sprayer

This flexibility allows use on both small and large-scale projects.

Can it be used on vertical surfaces?

Yes. The product can be mixed to a gel or paste consistency, allowing it to cling to vertical surfaces for better performance.

What is the recommended dwell time?

Dwell time ranges from:

• 30 minutes to several hours

This depends on coating thickness and environmental conditions. The surface must remain wet during this time for optimal results. For additional application tips reach out to us at 630-675-4509 or [email protected].

What is the coverage rate?

Coverage varies based on application and thickness:

• Approximately 50–200 sq ft per gallon

For quantity recommendations for your project reach out today at 630-675-4509 or [email protected].

What is the best way to remove the coating after application?

Once the coating has lifted:

• Use a pressure washer or scraper
• Work from bottom upward
• Use about a 45° spray angle when pressure washing

What types of projects is Wood Stripper Pro best for?

Wood Stripper Pro is ideal for:

• Deck restoration
• Fence refinishing
• Exterior wood restoration
• Paint removal from concrete or masonry
• Multi-layer coating removal projects

Does it have a strong odor?

No. It features a low-odor professional formula designed to maintain performance while improving the working environment.

What temperature should it be applied in?

Apply between:

• 50°F and 100°F

Lower temperatures will increase dwell time.

Do I need to use PPE when applying?

Yes. Always wear full PPE including:

• Chemical-resistant gloves
• Protective clothing
• Respirator
• Eye protection

This product is designed for professional use and must be handled safely.

Can Wood Stripper Pro be used indoors?

It should be used outdoors or in well-ventilated areas only to ensure safety during application.

Will one application always remove everything?

Not always. Depending on coating thickness:

• A second application may be required
• Light brushing may help during removal