Green Safety Glow in the Dark Tape | Stairways, Steps, Emergency Exit, Walkways, Ramps | 24 Hour Glow | Excellent Adhesion | Rechargeable
Starting at $19.95
- Glow time is 24 hours
- Suitable for Indoor and Outdoor Applications
- Water Resistant
- Works on wood, vinyl, plastic, leather, metal and laminate
- Excellent adhesion, rechargeable and clean removal
Overview
- Description
- Additional Information
- Specs
- Videos
- More Options
Green Safety Glow in the Dark Tape | Stairways, Steps, Emergency Exit, Walkways, Ramps | 24 Hour Glow | Excellent Adhesion | Rechargeable
This soft vinyl Green Glow in the Dark Tape offers hours of glow time from as little as a 30 minute charge. Suitable for both indoor and outdoor applications, this vivid glow tape sticks on avariety of surfaces including wood, vinyl, plastic, leather, metal and laminate. With use for safety or decorative applications in residential and commercial settings. Mark panels, stairs, or direct pathways to form route indicators and emergency exits. Excellent adhesion, rechargeable and clean removal. Meets and exceeds glow time required by the International
Techno Glow Tape is made like normal vinyl tape except it has a layer of photoluminescent material applied that makes it glow in the dark. The tape will absorb direct or indirect light energy and emit a glow when the lights are turned off. It has as elf-adhesive back that can be peeled off to adhere to any smooth clean surface.
Consider our other Glow in the Dark options for your project including Anti-Slip Glow Sand, Glow in the Dark Flakes and Florescent Black Light Flakes!
Where is Green Glow in the Dark Tape used?
- Indoor or Outdoor Applications
- Mark Stairs and Steps
- Door Exits
- Railings
- Walkways
Why Green Glow in the Dark Tape?
- Glow time is 24 hours
- Suitable for Indoor and Outdoor Applications
- Water Resistant
- Works on wood, vinyl, plastic, leather, metal and laminate
- Excellent adhesion, rechargeable and clean removal
- Meets Glow Time required by the International Building Code
| Weight | N/A |
|---|---|
| Width | 1 Inch, 1/2 Inch, 2 Inch |
| Length | 10 Feet, 32 Feet |
SPECIFICATIONS |
|
|---|---|
| Glow Color | Green |
| Glow Time | 24 Hours |
| Water Resistant | Yes |
| Charge | Light energy absorbing, no radiation hazards |
| Adhesion | Adhesive backed. Conforms to uneven surfaces |
| Thickness | 0.68mm |
| Sizes in 10 feet | 1/2 inch, 1 inch, 2 inch |
| Sizes in 32 feet | 1/2 inch, 1 inch, 2 inch |
-
Anti-Slip Glow Sand | Aqua, Blue & Green | Photoluminescent for Floor Coatings | Glows to 8+ Hours | 3 Grit Sizes
- Create anti-slip texture for a slip resistant floor surface with a great looking, long lasting green glow when lights are off
- Largest particle size green "Glow in the Dark Sand" at 30 grit (500 microns)
- Anti-Slip Glow Sand comes in Green (30 grit), Blue (65 grit) and Aqua (110 grit)
- Brightest and longest lasting glow pigment
- Ideal for use with epoxies, polyaspartics, urethanes and polyurethanes
-
Garnet Anti-Slip Additive| BROWN | 36 Grit | Non-Skid Tough Durable Fl
- Adds very tough skid resistance & texture profile to a surface
- Works well with high performance 2 part pigmented floor coatings
- Non-reactant – will not interfere with your coatings
- Well bonded into the body of the coating
- Long lasting for extended anti-slip performance
-
Silica Sand Anti-Slip Additive For Epoxy, Polyaspartic, Polyurethane,
- Adds very tough skid resistance & texture profile to a surface
- Works well with high performance 2 part floor coatings
- Does not change physical properties of the coating
- Well bonded into the body of the coating
- Comes in 5 mesh sizes
-
Aluminum Oxide Anti-Slip | WHITE | 4 Grit Sizes | Non-Skid Tough Durab
- Adds very tough skid resistance & texture profile to a surface
- Works well with high performance 2 part floor coatings
- Does not change physical properties of the coating
- Well bonded into the body of the coating
- Long lasting for extended anti-slip performance
-
Polybead Anti-Slip Additive | Least Change Appearance | Easy to Clean & Use | 2 Grit Sizes
- Adds skid resistance & texture profile to a surface
- Least Change in Surface Appearance & Easiest to Clean
- Very small amounts required
- Use with Epoxy, Polyaspartic, Urethane, Polyurethane and most coatings
- Lightweight aggregate, blends well into coating
-
Aluminum Oxide High Wear Abrasion Resistant Additive | 220 Grit | 325 Grit for Urethane & Polyaspartic
- Significantly improves abrasion resistance of floor coatings
- Helps create a tough, durable, abrasion resistant surface
- Simple and easy to add while mixing a coating
- Works with any urethane and thin film polyaspartic coating
- Works well with high performance 2 part floor coatings
-
Green Safety Glow in the Dark Tape | Stairways, Steps, Emergency Exit, Walkways, Ramps | 24 Hour Glow | Excellent Adhesion | Rechargeable
- Glow time is 24 hours
- Suitable for Indoor and Outdoor Applications
- Water Resistant
- Works on wood, vinyl, plastic, leather, metal and laminate
- Excellent adhesion, rechargeable and clean removal
You may also like…
-
Silica Sand Anti-Slip Additive For Epoxy, Polyaspartic, Polyurethane,
- Adds very tough skid resistance & texture profile to a surface
- Works well with high performance 2 part floor coatings
- Does not change physical properties of the coating
- Well bonded into the body of the coating
- Comes in 5 mesh sizes
-
Aluminum Oxide Anti-Slip | WHITE | 4 Grit Sizes | Non-Skid Tough Durab
- Adds very tough skid resistance & texture profile to a surface
- Works well with high performance 2 part floor coatings
- Does not change physical properties of the coating
- Well bonded into the body of the coating
- Long lasting for extended anti-slip performance
-
Aqua Blue & Emerald Green Glow Flakes (PhotoLuminescent Glow in Dark) For Floor Coating Systems | Indoor | Outdoor
- Adds Exciting & Unique Look to Interior Floors
- Phosphorescent - Lights up Floor in the Dark
- Aqua Blue or Emerald Green glow color
- Activated after absorbing both Indoor & Outdoor Illumination
- Available in 1/4" Standard size