- Compliant with ANSI/ESD S97.2, ESD SP9.2, ANSI/ESD S20.20, IEC 61340-5-1
- Two layer heel rubber
- Black conductive exterior – 10e4 ohms
- White insulative interior prevents carbon marking on shoes
- 1 meg ohm resistor
- Conductive ground ribbon measuring 14.5” x .5"
- Plastic parts comprised of anti-static nylon material
Call us (630) 675-4509
Show
Filter by
Filter by
Filter by
E2.8 Poly-Chemcure Primer | Fast Recoat | Low-Temp | OEM/Steel Fabricator
$250.00- High performance primer can be prepared on carbon steel, galvanized steel and aluminum
- Recoating in 90 minutes is possible for maximum productivity
- No induction time and longer pot life will improve productivity
- A smooth, sandable primer at 3 mils DFT over abrasive blasted or power tool cleaned substrate is needed for additional corrosion resistance
- Application by brush and roller, in addition to spraying, may be necessary
- Spray application with minimal dry spray is desired
- Application at temperatures as low as 35F is needed. Will cure down to 20F
E211 Epoxy Primer & Sealer
From: $170.00- Good chemical, abrasion and impact resistance
- Outstanding adhesion and "wetting out" properties
- Very low permeability-tight sealed film
- Used as a primer and/or finish coat
- USDA Approvable
- Available in a wide range of colors
- Self-priming on concrete and steel
E25 Water Based Epoxy Primer | Primer for E28 Cool Life | 6 Color/Tint Options | Concrete
$150.00- Excellent Primer for the E28 Cool Life Deck Coating
- 6 Color/Tint Base Options
- Long Pot Life
- Quick 6 Hour Recoat Time
- Water Based - Low VOC
- Easy To Clean
E275 High Build Polyamide Epoxy Mastic | Chemical Resistant | Excellent Adhesion to Steel
$190.00- Excellent adhesion to steel
- Meets USDA Requirements
- A high build primer or finish coat
- Excellent against "undercutting"
- Can be applied up to 12 mils DFT
- Easy to apply, self priming on steel
- Excellent build to protect sharp edges
- Good chemical abrasion and impact resistance
- Convenient 1:1 mixing ratio
- Excellent salt and fresh water resistance
E28 Cool Life Deck Coating | Infrared Heat Reflective Technology in 12 Colors | 100% Acrylic | Concr...
From: $70.00- Up to 25-30% Reduction in Surface Temperature using one of 12 colors available
- Infrared Heat-Reflective Technology
- Great for Pool Decks, Patios, Porches Concrete, Masonry, Wood
- UV Resistant
- Slip resistant surface - passes ASTM D2047-82
- Excellent Hide & Color Retention
- Resistant to Ponding Water
- Light Chemical Resistant
- Alkali & Moisture Resistant
- Fast Drying
- Easy to Clean
- Water based - low voc
E322HW High-Gloss Aliphatic Urethane Abrasion & Chemical Resistant Low Temp 45°F
From: $60.00- Outstanding durability with impact resistance of 160 in lb (Gardner Impact test)
- Cold temperature application down to 45°F
- Excellent abrasion resistance Only 22 mg loss (Tabor Abrasion test) Reduced to 10 mg loss using our High Wear 325 additive
- Excellent Chemical Resistance
- Aliphatic, UV Stable and will not yellow
- Easy to Use with Long 2-4 Hour Pot Life
- Great for both Indoor and Outdoor Concrete Floor Projects
- Comes in wide Variety of Clear and 18 Different Colors
- Solvent Based - Excellent adhesion
E322SG Semi-Gloss Aliphatic Urethane Abrasion & Chemical Resistant Low Temp 45°F
From: $60.00- Outstanding durability with impact resistance of 160 in lb (Gardner Impact test)
- Cold temperature application down to 45°F
- Excellent abrasion resistance Only 24 mg loss (Tabor Abrasion test) Reduced to 12 mg loss using our High Wear 325 additive
- Excellent Chemical Resistance
- Aliphatic, UV Stable and will not yellow
- Easy to Use with Long 2-4 Hour Pot Life
- Great for both Indoor and Outdoor Concrete Floor Projects
- Comes in wide Variety of Clear and 18 Different Colors
- Solvent Based - Excellent adhesion
E332 Clear Antimicrobial Urethane | High Gloss | Resist Mold & Mildew | Stain & Chemical R...
$220.00- Antimicrobial technology
- Excellent chemical resistance
- High Gloss
- Excellent Weather Resistance
- Highly resistance to abrasion and impact
- Extremely hard, yet flexible
- Resists mold and mildew
- Outstanding "wearing" properties
- Easy to Clean
- Topcoat for decorative floors, toppings and pigmented epoxy concrete coatings
E332 Polyester Polyurethane Coating| Clear | Topcoat | High Gloss | Chemical, Impact & Abrasion...
From: $134.00- Excellent Chemical Resistance
- High Gloss
- Excellent Weather Resistance
- Highly Resistant to Abrasion and Impact
- Non-chalking and non-yellowing
- Extremely hard, yet flexible
- Outstanding "wearing" properties
- Easy to clean
- Top Coat for decorative floors, toppings and pigmented epoxy concrete coatings
E343 Quick Fix Concrete Repair Epoxy Urethane Patch Kit | 10 Min Light Traffic | Low Temp 20°F
From: $58.00- Extremely Quick - Walk on it 10 minutes, Full Serivce 1 hour
- Tough Durable Repair as hard as concrete
- Good for use interior & exterior repairs
- Low viscosity Product for Outstanding Adhesion and Deep Penetration of Cracks
- Comes in both small and large patch kits including silica sand and liquid only options
- Use With Sand For Improved Performance and lower repair costs
- Low viscosity (30 cps) Can be Used Without Sand to Penetrate Very Small and Deep Cracks
- Great for cold weather application down 20°F or warm weather up to 90°F
E344QC Polyaspartic Quick Cure Concrete Floor Coating | 85% Solids
From: $60.00- Tough, durable topcoat for interior epoxy floor coatings
- Fast Curing for quick back in-service
- Excellent chemical and abrasion resistance
- UV Stable and will not yellow
- Beautiful high gloss appearance
- Designed for high traffic and industrial areas
- High solids 85%
- Available in clear & 13 colors (Colored Pigment Sold Separately)
E352P Hi-Gloss Polyester Polyurethane Floor Coating | Chemical Abrasion Resistant | Exterior Interio...
From: $205.00- Great Interior & Exterior Horizontal Concrete & Steel Protection
- Exceptional Exterior Durability
- Excellent weather resistance
- Non-chalking and non-yellowing with excellent gloss and color retention
- Extremely tough, yet flexible
- A tile-like finish.
- Easy to clean
- Excellent chemical and stain resistance
- Highly resistant to abrasion and impact
- Outstanding wearing properties
- Handles up to 250°F Dry Service
- Long 4 hour POT life @ 75ºF
- Available in clear and 11 colors
E356HG High Gloss Urethane Moisture Cured | Exceptional Abrasion & Chemical Resistance | UV Sta...
From: $70.00- Superior abrasion resistance Only 4.4 mg loss (Tabor Abrasion test)
- Outstanding Chemical Resistance
- Excellent durability with impact resistance of 100 in lb (Gardner Impact test)
- Aliphatic, UV Stable and will not yellow
- Easy to Use one part with Long 3-5 Hour Pot Life
- Great for both Indoor and Outdoor Concrete Floor Projects
- Solvent Based With Excellent adhesion
E370P Hi-Gloss Hi Build Polyurethane | Non-Yellowing | For Vertical Concrete and Steel | Interior &#...
From: $118.00- Great Interior & Exterior Vertical Concrete & Steel Protection
- Exceptional Exterior Durability
- High solids
- Tile-like finish.
- Easy to clean
- Good chemical and stain resistance
- Highly resistant to abrasion and impact.
- Excellent gloss and color retention to UV exposure
- Pass 2500 hrs - QUV Accelerated Weathering ASTM D4587
- Outstanding wearing properties.
- Non-chalking and non-yellowing
- High film build
- Handles up to 300°F Dry Service
- Long 4-6 hour POT life @ 75ºF
- Available in clear and 21 colors
E374 Clear Satin Polyurethane | Non-Yellowing | For Vertical Concrete and Steel | Walls
$125.00- Great Interior & Exterior Vertical Concrete & Steel Protection and as topcoat for light to medium duty foot traffic only applications
- Exceptional Exterior Durability
- High solids
- Tile-like finish.
- Easy to clean
- Good chemical and stain resistance
- Highly resistant to abrasion and impact.
- Excellent gloss and color retention to UV exposure
- Pass 2500 hrs - QUV Accelerated Weathering ASTM D4587
- Outstanding wearing properties.
- Non-chalking and non-yellowing
- High film build
- Handles up to 300°F Dry Service
- Long 4-6 hour POT life @ 75ºF
- Available in clear and 21 colors
E398 High Build Acrylic Polyurethane | High Gloss
From: $146.00- Excellent resistance to acids, alkalis, salts, most industrial chemicals and many solvents
- For Use in tough corrosive chemical environments including 70% Sulfuric Acid, 37% HCL and 50% Sodium Hydroxide
- Extremely tough with high wearing properties
- Excellent abrasion and impact resistance
- Good adhesion to concrete
- Self-leveling coating
- Meets USDA requirements
- VOC compliant
- No solvent odor when applying
- Low temp cure - down to 40F
- Will cure in damp conditions
E444X Polyaspartic High Gloss Concrete Floor Coating | 84% High Solids | Non-Yellowing | Low Odor
From: $60.00- Tough, durable topcoat for epoxy floor coatings
- Indoor/Outdoor Applications
- Can Apply Direct to Concrete
- High solids 84%
- Easy to Work With 1:1 Mix Ratio
- Can be applied up 12 mils thick one coat (133 sq'/gallon)
- Excellent chemical and abrasion resistance
- UV Stable and will not yellow
- Beautiful high gloss appearance
- Designed for high traffic and industrial areas
- Available in clear & 13 colors (Colored Pigment Sold Separately)
E449 Polyaspartic Fast Cure High Gloss Concrete Floor Coating | 95% High Solids
From: $68.00- Tough, durable topcoat for epoxy floor coatings
- High solids 95%
- Quick back in service 3-5 hours light foot traffic
- Can be applied up 12 mils thick one coat (125 sq'/gallon)
- Excellent chemical and abrasion resistance
- UV Stable and will not yellow
- Beautiful high gloss appearance
- Designed for high traffic and industrial areas
- Available in clear & 13 colors (Colored Pigment Sold Separately)
E450SF Polyaspartic Slow Cure High Gloss Concrete Floor Coating | 90% Solids (Formerly E449SF)
From: $70.00- Tough, durable topcoat for interior epoxy floor coatings
- High solids 90%
- Can be applied up 12 mils thick one coat (120 sq'/gallon)
- Long Working time 20-25 min
- Excellent chemical and abrasion resistance
- UV Stable and will not yellow
- Beautiful high gloss appearance
- Designed for high traffic and industrial areas
- Available in clear & 13 colors (Colored Pigment Sold Separately)
E500MR BEAN-e-doo Mastic Remover | US Grown Soybean Technology | Remove Asbestos Black Mastic Carpet...
From: $35.00- Safely Remove Asbestos, Mastics, Adhesives
- Easy-to-Use
- Fast Acting
- Low, Non-Offensive Odor
- Non-Caustic
- Environmentally Friendly
E5013 Fast Set Clear Epoxy Primer WB Concrete | Wood | Masonry
From: $65.00- Versatile product good on concrete, masonry, wood surfaces
- Quick 4-6 hour Recoat for same day projects
- Excellent as clear primer for epoxy, polyaspartic and urethane coating systems
- Helps prevent concrete outgassing problems when used as primer
- Long 2 hour pot life
- Excellent adhesion 425 psi
- Good chemical and abrasion resistance
- Water base
E5015 Epoxy Primer WB Coating | Concrete Wood Masonry | 20 Colors
From: $51.00- Versatile product good on concrete, masonry, wood surfaces
- Excellent as primer for epoxy, polyaspartic and urethane coating systems
- Helps prevent concrete outgassing problems when used as primer
- Available in Clear and 20 Colors To Match With Topcoat
- Long 1 - 1.5 hour pot life
- Excellent adhesion 425 psi
- Good chemical and abrasion resistance
- Water base
E5030CL Urethane Clear Sealer / Topcoat WB
From: $60.00- Attractive, clear aliphatic non yellowing finish
- Versatile product good on concrete and masonry surfaces
- Recoat only 1-2 hours & light foot traffic 2-4 hours
- Extended 24 hour pot life
- Excellent abrasion resistance (Taber Abrasor test only 10 mg loss)
- High Gloss (>80 at 60 degrees)
- Flexible (120% Elongation at break)
- Water based
E517M Flake Filled Epoxy Mastic Steel & Concrete Coating | Chemical Containment | Low Temp Cure...
From: $125.00- Self Priming on steel
- Excellent primary containment coating for internal tank linings (when part of specified system)
- Excellent secondary containment coating
- Performs well over epoxy mortars and properly primed concrete surfaces
- Can be applied on damp surfaces
- Excellent chemical resistance to acids, caustics, solvents
- Outstanding impact and abrasion resistance.
- Exceptional adhesion Exceeds 700 psi
- Excellent flexibility pass 7/8" mandrel 180º Bend
- Apply Vertical Surfaces to 15 mils one coat
- Meets USDA requirements.
- Low temp cure version to 25°F
- Low VOC 72 grams/Liter
E540PM Poly U Polyurethane Adhesive Remover | US Grown Soybean Technology | Low VOC | Low Odor
From: $35.00- For use on pre-engineered and UV-finished wood floors
- Easy to use gel formula
- leans up Easily with water
- Made with 100% American-Grown soybeans
- Low, Non-Offensive Odor
E5520 Low Gloss Urethane Water Base Abrasion & Chemical Resistant
From: $64.00- Outstanding durability with impact resistance of 160 in lb (Gardner Impact test)
- Excellent abrasion resistance Only 23 mg loss (Tabor Abrasion test) Reduced to as low as 10 mg loss using our High Wear 325 additive
- Excellent Chemical Resistance
- Aliphatic, UV Stable and will not yellow
- Great for Indoor Concrete Floor Projects
- Very Low voc 35 g/L, water based formula
E5521 High Gloss Urethane Water Base | Abrasion & Chemical Resistant | Low Odor | Vapor Permeab...
From: $50.00- Outstanding durability with impact resistance of 120 in lb (Gardner Impact test)
- Excellent abrasion resistance Only 21 mg loss (Tabor Abrasion test) Reduced to as low as 10 mg loss using our High Wear 325 additive
- Excellent Chemical Resistance
- Aliphatic, UV Stable and will not yellow
- Great for Indoor Concrete Floor Projects
- Low odor, water based formula
- Vapor Permeable Topcoat
E555VN Novolac Epoxy | Superior Steel & Concrete Chemical Vertical Protection | Tank Linings
$142.00- Excellent resistance to acids, alkalis, salts, most industrial chemicals and many solvents
- For Use in tough corrosive chemical environments including 98% Sulfuric Acid, 37% HCL and 70% Sodium Hydroxide
- Vertical application to 10 mils DFT.
- Great for Secondary Containment for both steel and concrete surfaces
- Use as Primary Containment and Tank Linings when used as part of specified system
- Excellent abrasion resistance with ceramic filler
- Excellent in battery storage room areas.
- Meets USDA requirements
- May be applied in cold, damp conditions to 45°F with curing down to 35°F
E57936 Lithium Concrete Densifier | Deep Penetrating
From: $45.00- Increases durability by improving resistance to freeze thaw effects
- Improves abrasion resistance and durability.
- Improves weathering, densifies and reduces efflorescence of natural stone, precast stone and cement.
- Protects and fortifies concrete as it seals against moisture damage.
- Application will reduce dusting and increase concrete life
E57937 Lithium Concrete Densifier Extra Strength | Deep Penetrating
From: $60.00- Increases durability by improving resistance to freeze thaw effects
- Improves abrasion resistance and durability.
- Improves weathering, densifies and reduces efflorescence of natural stone, precast stone and cement.
- Protects and fortifies concrete as it seals against moisture damage.
- Application will reduce concrete dusting and increase concrete life
- Extra Strength formula for improved performance
- Comes in both ready-to-use and money saving concentrate options
E57940 Concrete Conditioner With Stain Guard
From: $70.00- Increases durability by improving resistance to freeze thaw effects
- Improves abrasion resistance and durability.
- Improves weathering, densifies and reduces efflorescence of natural stone, precast stone and cement.
- Protects and fortifies concrete as it seals against moisture damage.
- Application will reduce dusting and increase concrete life
E5820 Oil Stop Epoxy Concrete Primer / Coating For Oil Contamination Areas
From: $55.00- Great for coating over oil contaminated concrete
- Can use as a primer before applying decorative coating systems
- Good as stand alone black colored coating
- Excellent substrate penetration through oil contaminated surfaces
- Excellent adhesion where standard epoxies typically fail
- Long 1 - 2 hour pot life
- High solids, 2 component
E5829 Flexible Epoxy Urethane Interior Expansion and Control Joint Sealant
From: $160.00- Flexible interior joint filler - Elongation 50.4% at 70F (ASTM D-412)
- Good for both expansion and control joints
- Great for general industry applications
- Hybrid epoxy urethane 2 component formula
- 100% solids with 0 voc
- Long 30-40 minute working time
- Low odor
- Paintable surface
E5829V Vertical Interior Wall Expansion & Flexible Joint Sealant
From: $162.00- Flexible vertical interior joint filler - Elongation 67% at 70F (ASTM D-412)
- No sag formula for vertical interior wall and overhead applications
- Hybrid urethane epoxy 2 component formula
- 100% solids with 0 voc
- Low odor
- Paintable surface
E5830 Flexible Interior Expansion & Control Joint Sealant | Fast Set | Cartridge Applied
From: $60.00- Flexible interior joint filler and sealant- Elongation 100%
- Easy Dual Cartridge Applied System
- Quick setting with light foot traffic in as little as 1 hour
- Excellent abrasion resistance
- 100% solids with 0 voc
- Low odor
- Paintable surface
E591 / E590 Wet Surface Epoxy | Apply Underwater | Cures to 35°F | Concrete – Steel | Floors &...
From: $120.00- May be applied on wet or under water surfaces
- Cold temperature application down to 35°F
- Self-priming on steel and on most concrete applications
- Ideal for marginally prepared and painted surfaces
- Outstanding impact and abrasion
- High film build - Up to 20 mil DFT per coat on horizontal surfaces
- Vertical surfaces to 12 mils
- Excellent coating for manholes
- 100% solids and 0 g/L VOC's
- 3 Colors Available
E600GL Soy-Gel Coating Remover | US Grown Soybean Based | Remove Acrylic Enamel Latex Paints | Ureth...
From: $40.00- Removes Acrylic Enamel Latex Lead* Paints, Urethanes, Some Epoxies
- Up to 3 Times the Coverage of Traditional Strippers
- Horizontal and Vertical Applications
- 100% Biodegradable
- American Grown Soybean Based Technology
- Environmentally Friendly
- Low, Non-Offensive Odor
E603 Non Skid Epoxy | Truck Bed Liner | Anti-Slip
From: $96.00- Provides safer footing and traction
- Heavy duty non-ski resistance
- Provides excellent slip resistance
- Good water, salt and chemical resistance
- Excellent coating for Diamond Plate
- Cures down to 35F
- Good abrasion and impact
- Ready to use non-skid coating
- Easy to Apply
- Designed for wet areas
E605Pro with Safenol™ | Multipurpose Coatings Remover | Paints | Varnish | Enamel | Urethanes | Some...
From: $40.00- Removes Acrylic Enamel Latex Lead* Paints, Urethanes, Some Epoxies
- Up to 3 Times the Coverage of Traditional Strippers
- Single Application
- Horizontal and Vertical Applications
- Environmentally Friendly
- Low, Non-Offensive Odor
E610SP Soy-Gel Coating Spray Remover | US Grown Soybean Based | Remove Acrylic Enamel Latex Paints |...
From: $35.00- Removes Acrylic Enamel Latex Lead* Paints, Urethanes, Some Epoxies
- Specially Formulated for HVLP and Commercial Sprayers
- Vertical or Horizontal Application
- Up to 3 Times the Coverage of Traditional Strippers
- Horizontal and Vertical Applications
- 100% Biodegradable
- American Grown Soybean Based Technology
- Environmentally Friendly
- Low, Non-Offensive Odor
E615 Epoxy Crack Filler | 100% Solids | Vertical, Overhead & Horizontal | Concrete, Steel and W...
$185.00- May be applied up to 1" thick when patching holes
- Excellent chemical, abrasion and impact resistance
- Easily applied with trowel, putty knife or spatula
- Applies up to 1/2 inch vertically
- Excellent for filling bug holes
- Used for leveling base plates and embedding bolts
- Non-Toxic when cured
- Zero VOC
- Excellent for patching concrete in manholes and sewer pipes
E621 Flexible Control Joint Filler | 100% Solids | Up to 100% Elongation | Self-Leveling
$335.00- Up to 100% Elongation
- Good resistance to steel wheel traffic
- Very resilient and tough
- Outstanding water tight bond to concrete
- Helps to prevent erosion of control joint edges
- Self leveling
- Easy to work with, cold applied, no special equipment needed
- Excellent adhesion to concrete
- USDA approved
- No VOCs
E64 Rain Shield Elastomeric | Flexible 400% Elongation | 100% Acrylic | Ceramic Sphere Technology | ...
From: $75.00- Flexible Up to 400% elongation ASTM D412-87
- Resists Wind Driven Rain (Passes ASTM E96, TTC-555-B)
- Breathable, Thermal Barrier
- Excellent Adhesion
- Flexible: Performs very well in hot and cold environments
- Bridges Hairline Cracks
- Environmentally Friendly
- Excellent Dirt Pick Up Resistance
- Chemically resistant surface
- Superior Resistance to UV Breakdown
- Over 800+ Colors
E6470 Textured Primer | 100% Acrylic Latex | High Build Elastomeric | Concrete Masonry Stucco Wood
From: $62.00- Primer and Texture in one
- Allows matching of surrounding textured surfaces for repairs
- Superior adhesion to virtually any surface
- Excellent surface adhesion
- Fast drying
- Breathable
- Penetrates and seals porous surfaces
E650 Non-Skid Epoxy Floor & Deck Low Temp 25°F | OSHA ADA Navy Spec Mil-PRF-24667B Type 1 | 4 Co...
From: $107.00- Heavy duty non-skid resistance for concrete & steel
- Available in regular cure and cold temp formula to 25°F
- Designed for wet areas
- Meets ADA and OSHA requirements for safe co-efficient of friction (COF) when properly applied
- Meets Navy Military Specification Mil-PRF-24667B for Non-Skid Deck Coatings
- Excellent adhesion, abrasion and impact resistance
- Resistant to grease, oil, salt water, alcohol, detergent, gasoline, hydraulic fluid
- Excellent coating for Diamond Plate
- Easy to apply, ready to use non-skid coating
- Comes in 4 colors
- E651 Non-Skid Epoxy Version Available with ZERO VOC
E669 Clear Acrylic Lacquer High Gloss Sealer | Concrete | Brick | Wood | Solvent Based | Outstanding...
From: $55.00- Non-yellowing, high gloss. properties.
- Excellent penetration and high “wetting out”
- Excellent adhesion to concrete.
- Great for Concrete, Masonry & Wood Surfaces
- Good UV resistance.
- Good water and salt chemical resistance.
- Good stain resistance.
- Prevents “dusting” by increasing strength of concrete
- Ideal as dustproofing sealer.
- Very fast dry time.
E671 UV Resistant Epoxy Floor Coating | Clear | 100% Solids | For Metallic Pigment and Full Flake &#...
From: $55.00- Clear epoxy great for use with metallic pigments and full flake or quartz broadcast systems
- UV Resistance Additive in Coating
- High Build – 100% Solids Commercial Epoxy
- Good Adhesion 350 psi
- Good Chemical Resistance
E671CL Epoxy Floor Coating | Clear | 100% Solids | For Metallic Pigment and Full Flake & Quartz...
From: $52.00- Clear epoxy great for use with metallic pigments and full flake or quartz broadcast systems
- High Build - 100% Solids Commercial Epoxy
- Good Adhesion 350 psi
- Good Chemical Resistance
- High build 12-30 mils one coat (53 - 130 sq'/gal)
E680HS Hard Surface Graffiti Remover | 100% American-Grown Soybean Technology | Non-Caustic | Non-Co...
From: $40.00- 100% American-Grown Soybean Technology
- Maintain Original Appearance - No Need to Repaint!
- Fast-Acting
- Low VOC
- Low, Non-Offensive, Odor
- Non-Caustic
- Non-Corrosive
E682PS Porous Surface Graffiti Remover | 100% American-Grown Soybean Technology | Non-Caustic | Non-...
From: $42.00- 100% American-Grown Soybean Technology
- Maintain Original Appearance - No Need to Repaint!
- Fast-Acting
- Low VOC
- Low, Non-Offensive, Odor
- Non-Caustic
- Non-Corrosive
E690PB Lead Out™ Lead Paint Remover | Safely Neutralize & Remove Lead Paint | 100% American-Gro...
From: $60.00- Safely neutralizes lead content to below EPA standards
- Encapsulates lead in to a non-hazardous waste
- Limits lead dusting during removal
- Easily applied gel formula
- Low, non-offensive odor
- Non-Caustic
E70 Stretch-Guard Elastomeric Coating | Flexible 200% Elongation | 100% Acrylic | Concrete Stucco Ma...
From: $32.00- Up to 200% elongation
- Flexible: Performs very well in hot and cold environments
- Repels water & helps eliminate moisture penetration
- Good mildew and dirt resistance
- Self-Priming
- Ultra-violet stability
- Resistant to dirt pick-up
- Over 800 colors available!
E700DG Emerge Degreaser Super-Concentrate | Removes Oil Grease Dirt Grime From Concrete | Wood | Vin...
From: $35.00- Removes Oil, Grease, Dirt & Grime From Wide Range of Surfaces
- Super-Concentrated & Easy to Dilute
- Vertical & Horizontal Application
- Low, Non-Offensive Odor
- Non-Caustic
- Environmentally Friendly
E700HV Epoxy | Exceptionally Tough | Abrasion & Chemical Resistant | No Topcoat Required
From: $64.00- Saves Money - Eliminates Need for Urethane or Polyaspartic Topcoat
- Extremely Tough D-90 Shore Hardness
- Exceptional Abrasion resistance Only 19 mg loss (Tabor test)
- Excellent Adhesion 420 psi
- Good Chemical Resistance
- Great Looking Very High gloss (80-105 at 60 degrees @ glossmeter)
- 97% Solids Commercial Epoxy
- High build 15-30 mils one coat (53 - 106 sq'/gal)
- Wide Variety of 20 Colors
E7075 Smooth Primer | 100% Acrylic Latex | Stain Blocking | Concrete Stucco Wood Metal Plywood
From: $35.00- Superior adhesion to virtually any surface
- Blocks water soluble stains such as tannins, rust and smoke damage
- Excellent surface adhesion
- Fast drying
- Breathable
- Low odor
- Water clean-up
- Penetrates and seals porous surfaces
- Great matching primer for our E64, E68H, E70, E78H, Tec-Top and Cool Coat Coatings
E707HB High Build 100% Solids Epoxy Floor Coating | 20 Colors
From: $55.00- High Build - 100% Solids Commercial Epoxy
- Long POT Life (working time) 30-50 min
- Excellent Adhesion 450 psi
- Abrasion resistant Only 32 mg loss (Tabor test)
- Good Chemical Resistance
- High build 12-30 mils one coat (53 - 130 sq'/gal)
- Wide Variety 20 Different Colors
E707LVP High Solids Epoxy Primer & Base Coat | Helps Prevent Outgassing | 20 Colors
From: $54.00- High Solids Commercial Grade Epoxy Primer
- Helps reduce problems from concrete outgassing (air bubbles)
- Long POT Life (working time) 35-55 min
- Excellent Adhesion 430 psi
- Good Chemical Resistance
- Wide Variety 20 Different Colors
E760CE Verasafe® Muriatic Acid Replacement | Etch Concrete | Safe Organic Alternative to Harmful Aci...
From: $30.00- Safe Alternative to Hydrochloric, Sulfuric and Muriatic Acids
- Organic Formula
- No Neutralizing Required
- Non-Caustic
- Non-Fuming
- Low VOC
- 100% Biodegradable
- Low, Non-Offensive, Odor
E77 Fast Cure Epoxy Concrete Primer & Base Coat | 15 colors
From: $95.00- Ideal for a base coat for flake floors
- Good chemical, abrasion and impact resistance
- Outstanding adhesion and "wetting out" properties
- Used as a primer for pigmented polyurethanes
- Excellent as a primer for polyaspartics
- USDA Approvable
- Available in a wide range of colors
- Self-priming on concrete and steel
- 15 color options
E811FP Acrylic Self Plasticizing Roof Coating | Monolithic Flexible Membrane
From: $240.00- Exceptionally tough, flexible 1 part acrylic roof coating
- Excellent adhesion for Concrete, Wood and Metal
- Tough surface, holds up to normal foot traffic
- Excellent weathering pass ASTM G93 for 9,000 hrs
- Excellent UV stability
- Resists growth of mildew
- Excellent flexibility 415% Elongation
- Resists cracking, splitting with building movement
- Available in 6 colors
- Underwriters Laboratories (UL) Tested & Certified
E814CP Co-Polymer Flat Roof Coating | 11 Color | Flexible | Waterproof
From: $235.00- Exceptionally tough, flexible 1 part SEBS Based waterproof coating
- Great for both Flat & Sloped Roofs
- Excellent adhesion EPDM, APP, TPO, Hypalon, Fiberglass, PVC, Polyurethane Foam, Concrete, Wood, Metal
- Excellent waterproof with E96 Vapor Transmission Class I 0.025 perms and Water Absorption 0.04%
- Excellent weathering
- Excellent UV stability
- Good resistance to dirt pickup
- Excellent low temp flexibility 500%+ Elongation
- Resists mildew and fungi growth
- Good resistance to Alkalis and acids
- Available in 11 Colors
- Underwriters Laboratories (UL) Tested & Certified
- Class A Fire Rated
E814R Co-Polymer Liquid Rubber Roof Walkway Coating | Slip Resistant
From: $210.00- Exceptionally tough, durable one part waterproof roof walkway
- Offers excellent anti-slip walking surface
- Excellent adhesion EPDM, APP, TPO, Hypalon, Fiberglass, PVC, Polyurethane Foam, Concrete, Wood, Metal
- Available in 12 colors
- Excellent waterproof with E96 Vapor Transmission Class I 0.025 perms and Water Absorption 0.04%
- Excellent weathering
- Excellent UV stability
- Good resistance to dirt pickup
- Excellent low temp flexibility with 500%+ Elongation
- Resists mildew and fungi growth
- Good resistance to Alkalis and acids
E814RCP Heat Reflective Co-Polymer White Flat Roof Coating | Cools Roof Surface | Saves Energy | Fle...
From: $205.00- Exceptionally Tough, Heat Reflective, 1 Part SEBS Based Waterproof Coating
- Great for Flat & Sloped roofs
- Excellent adhesion to EPDM, APP, TPO, Hypalon, Fiberglass, PVC, Polyurethane Foam, Concrete, Wood, Metal surfaces
- Reflective white color reduces energy costs with Solar Reflectance 82.5% and SRI 102 (solar reflective index)
- Excellent waterproof E96 Vapor Transmission Class I 0.025 perms & Water Absorption 0.04%
- Excellent weathering
- Excellent UV stability
- Good resistance to dirt pickup
- Excellent low temp flexibility 500%+ Elongation
- Resists mildew and fungi growth
- Good resistance to Alkalis and acids
- Underwriters Laboratories (UL) Tested & Certified
- Class A Fire Rated
E8840 Heat Reflective Roof Coating | 100% Acrylic Ceramic Elastomeric | Flat Build-Up Roofs | Metal ...
From: $60.00- Reduce Interior Temperatures Up To 20%
- Up to 30% Energy Savings
- Waterproofing System
- Resists Ponding Water
- Extends Roof Life
- Infused with Ceramic Spheres to add Durability and Insulating Value
- Class A (ASTM-E-108) Fire Rated
- Easy Water Clean-up
E8875 Underseal Water Proofer | 100% Acrylic Elastomeric | 500% Elongation | Composition, Bitumen, A...
From: $65.00- Excellent Roof Coating, Planter Box & Shower Pan Waterproofing Basecoat
- Up to 500% Elongation
- Primes and Seals
- UV Resistant
- Creates a Water Barrier
- Flexible at Low Temperatures
- Resistant to Ponding Water
- Resistant to Cracking
- Low VOC/Environmentally Friendly
- Topcoat with our E8840 Heat Reflective Roof Coating for an energy saving waterproofing system
E903M Urethane Cement High Build Mortar | Wet Heat to 200F | Hot Oil & Water Wash | Resist Fung...
$245.00- Excellent heat and thermal shock resistance to 200F
- Very good chemical resistance to organic and inorganic acids and solvents
- Resistant to Fungi Growth: Passes rating of 1 @ ASTM G-21
- Seamless hygienic finish with no grout lines
- High build repairs to 1"
- Excellent bonding characteristics
- Low odor, fast installation and fast cure.
- Low temp application down to 45F
- Available 3 colors gray, tan and tile red
E903SL Urethane Slurry | High Wet Heat 200F | Hot Oil & Water Wash | Moisture & Fungi Resi...
$260.00- Excellent heat and thermal shock resistance to 200F wet heat
- Very good chemical resistance to organic and inorganic acids and solvents
- Excellent Moisture vapor transmission to 12 pounds per 1,000 sq. ft. over a 24 hour period as per ASTM E1907
- Resistant to Fungi Growth: Passes rating of 1 @ ASTM G-21
- Good anti-skid surface
- Excellent bonding characteristics
- Great protection for food and beverage industry, food processing plants, dairy farms, industrial kitchens and wine cellars.
- Low temp application down to 45F
- Available 3 colors gray, tan and tile red and 2 package sizes
- E903SL Urethane Slurry is the high performance basecoat to the E903TC Urethane Top Coat high heat System
E903TC Urethane Topcoat | High Wet Heat 200F | Hot Oil & Water Wash | Moisture & Fungi Res...
From: $125.00- Excellent heat and thermal shock resistance to 200F wet heat
- Very good chemical resistance to organic and inorganic acids and solvents
- Excellent Moisture vapor transmission to 12 pounds per 1,000 sq. ft. over a 24 hour period as per ASTM E1907
- Resistant to Fungi Growth: Passes rating of 1 @ ASTM G-21
- Good anti-slip surface
- Excellent bonding characteristics
- Great protection for food and beverage industry, food processing plants, dairy farms, industrial kitchens and wine cellars.
- Low temp application down to 45F
- Available 3 colors gray, tan and tile red
- E903TC Urethane is the high performance topcoat to the E903SL Urethane high heat Slurry System
E903UCB Cove Base Urethane Mortar | HIgh Heat 250F | Anti-Fungal
$160.00- Easy construction of vertical cove bases
- Seamless hygienic finish with no grout lines
- Resistant fo fungi growth
- Low odor, fast installation, fast cure
- Thermal shock to 250F & chemical resistance
- 3 color options
E915HD Heavy Duty Cleaner Degreaser Concentrate | 100% Biodegradable
From: $37.00- Heavy duty cleaner formulated for versatility and dependability.
- Rapidly removes dirt, grease and grime from wide variety surfaces
- Compatible with most industrial floor coatings incl Epoxies, Polyaspartics, Urethanes
- Dissolves and removes food grease and many industrial oils and greases
- Use as general-purpose cleaner, floor cleaner, wax and floor finish stripper, engine degreaser and many other cleaning problems.
- 100% Biodegradable
- No caustics, butyl ethers, or chlorinated and petroleum based solvents
- Use by hand or through steam or pressure cleaning equipment, automatic floor scrubbers, etc
- Economical Concentrate Formula. Dilution rates to 1:50 for sensitive surfaces
E916MF Multi-Functional Heavy Duty Cleaner Concentrate | Floors Walls Equipment
From: $28.00- Rapidly removes dirt, grease and grime from wide variety surfaces
- Dissolves and removes food grease and many industrial oils and greases
- Use as general-purpose cleaner, floor cleaner, wax and floor finish stripper, engine degreaser and many other cleaning problems.
- Use by hand or through steam or pressure cleaning equipment, automatic floor scrubbers, etc
- Economical Concentrate Formula. Dilution rates to 1:30 for sensitive surfaces.
EasyClean Bio Stripper | Remove Paint Epoxy Varnish Lacquer | Eco-Friendly | Water Based | Fast-Acti...
From: $20.00- Remove Paint Epoxy Varnish Lacquer Shellac Polyurethane
- Horizontal and Vertical Applications
- Reduced Dwell Time
- Environmentally Friendly
- Low voc
- Low, Non-Offensive Odor
- Fast Acting
EcoScrub Floor Stripper/ Degreaser
From: $130.00- Rinse-free formula
- Low foaming
- No environmentally toxic preservatives
- Low Odor
- Non caustic
- Removes CoatZF Static-dissipative floor finish
- Use With Groundworx Basic ESD Epoxy Floor for heavily soiled areas.
EE-10 Epoxy Primer | 98% Sulfuric Acid Immersion Service | 100% Solids
From: $88.00- Excellent for 98% Sulfuric Acid Immersion
- Strong Chemical Resistance
- Good in aggressive acid environments
- Immersion and Non-Immersion Service
- Work on Ferrous and Non-Ferrous Metals & Concrete
EE-121HT Amine Cured 100% Solids Novolac Epoxy | Top Coat | High Heat
From: $85.00- Temperature resistance up to 500F (dry) and spike to 580F (3 hours)
- Strong Chemical Resistance
- 100% Solids
- Very Good Abrasion
- Great for aggressive, industrial applications
EE-70 Amine Cured 100% Solids Spray Apply Epoxy | Secondary Containment | NSF 61 Potable Water | USD...
From: $50.00- Secondary Containment Application
- Can be applied to damp or wet substrates
- 100% Solids
- Chemical and Abrasion Resistant
- Immersion and Non-Immersion Service
EE-71 Amine Cured 100% Solids Novolac Epoxy Topcoat| Secondary Containment | Chemical Resistant | US...
From: $50.00- Secondary Containment Application
- Can be applied to damp or wet substrates
- 100% Solids
- Chemical and Abrasion Resistant
- Immersion and Non-Immersion Service
EE-72 Novolac High Heat Epoxy | Immersion to 245ºF | Dry Heat to 400ºF (3 Hrs) | Secondary Containme...
From: $54.00- Strong chemical resistance to acids and alkalis
- High Heat Environments
- Immersion Service to 245ºF
- Dry Heat to 400ºF (3 Hrs)
- High Build Formula to 100 mils DFT (dry film thickness) in One Coat
- Self-leveling flooring
- 100% Solids
- Excellent flexibility without sacrificing chemical resistance
- High Abrasions Resistance
- Easy to clean surface
EE-80 Solids Epoxy Pre-Primer | Structural Steel, Tanks, Waste Water | Chemical Resistant | USDA | 1...
From: $70.00- Secondary Containment Application
- Can be applied to damp or wet substrates
- 100% Solids
- Chemical and Abrasion Resistant
- Immersion and Non-Immersion Service
EE-95 Novolac Epoxy Rebuild | 100% Solids | Restoration | Vertical
From: $80.00- Rebuild any pit repair
- Smoothing or leveling of vertical areas
- Solvent Free
- VOC Free Product
- Strong chemical resistance
- Applied up to 500 mils without slump
Efflorescence Blocker Protects Concrete and Masonry Surfaces | Floors and Walls
From: $87.00- Blocks efflorescence & alkali from coming to surface
- Concrete & Masonry Floors and wall Surfaces
- Ideal for planters and groundwater penetration
- Excellent exterior durability
- Direct and reverse impact resistant
- Works as a universal primer
- Water and stain resistant
- Wet and dry adhesion
Enhanced Flake Sample Kit | Natural Mica | Colored Mica | Glitter Powder & Glitter Flakes | 51 ...
$60.00- Great Sales Sample and Selling Tool
- Actual Loose samples of all variety of vinyl flake enhancement
- 51 samples included
- Great way to help create and visualize your own unique custom blend
- Quickly Show Customers How You Can Make Their Floor Look Great using decorative Random Cut Glitter Flakes
ESD 640 Textured Conductive Vinyl Chair Floor Mat Protects Anti-Static Floors | Meets ANSI 20.20
From: $120.00- Resistant to acids, reducing agents, detergents, alcohols, hydrocarbons, mineral oil, amines and aldehydes
- Black, pebble-embossed textured surface
- Single layer .080" (2.032 mm) thickness
- Conductive, <1e6 ohms ANSI/ESD S7.1
- Operating Temperature -20F to 200F (-29C to 93F)
- Grounding snap add upon request
- Made in USA
ESD Cleaning Buffing Pads | Use with Eco Scrub Degreaser
From: $40.00- Gray Scrub Pad provides great initial maintenance for light to moderate soiled floors
- Maroon Scrub Pad provides great maintenance for moderate to heavy soiled floors
- Use for both sides of scrub pad
- 1,500 square ft coverage
- Enhanced cleaning for ESD floor systems
- Use with the Eco Scrub Degreaser.
ESD Conductive Anti-Fatigue Cushioned Floor Mat Protects Anti-Static Floors | Meets ANSI 20.20
From: $335.00- Conductive 1/2" cushioned Anti-Fatigue Floor Mat
- Resistance point to point measures 1x10e5 – 1x10e7 ohms
- Dissipative cushioned under layer
- Smooth surface
- Beveled edges
- Equipped with 10mm female ground socket
- 10’ grounding cord
- Made in USA
- Protects ESD Flooring & ESD Paint Investment
- Comes in 3 sizes
ESD Conductive Floor Runner Protects Anti-Static Floors | Meets ANSI 20.20 | 48″W x 75’L
$3,400.00- Protects ESD Flooring & ESD Paint Investment
- Solid Flat Surface Impervious to Damage from Chair Casters
- Great for Long Workbenches or easy cut to size with utility razor knife: 48"W x 75'L
- Conductive Anti-Static Protection
- Continuous and Permanent Path-to-Ground
- Lifetime Warranty ANSI S20.20 & ANSI S7.1-2005
- Electrical properties are warranted for the lifetime of the mat
- Resistance measures 10e4 – 10e6 ohms per ANSI/ESD S7.1-2005
- Compliant to ANSI/ESD S20.20
- Solid single layer is .090" (2.29 mm) thick
- Low outgassing and low VOC
- Made in the USA
ESD Conductive Vinyl Chair Floor Mat Protects Anti-Static Floors | Meets ANSI 20.20
From: $200.00- Protects ESD Flooring & ESD Paint Investment
- Solid Flat Surface Impervious to Damage from Chair Casters
- Conductive Anti-Static Protection
- Continuous and Permanent Path-to-Ground
- Lifetime Warranty ANSI S20.20 & ANSI S7.1-2005
- Comes in 3 sizes
- Electrical properties are warranted for the lifetime of the mat
- Resistance measures 10e4 – 10e6 ohms per ANSI/ESD S7.1-2005
- Compliant to ANSI/ESD S20.20
- Solid single layer is .090" (2.29 mm) thick
- Low outgassing and low VOC
- Made in the USA
ESD Copper Grounding Strips | ANSI/ESD S20.20 | Conductive Grounding For Floor Paint
From: $50.00- Safely ground floor coating systems
- Meet ANSI 20.20 grounding standards when used in conjunction with proper safety items
- Easy to Apply With Adhesive Backing
ESD Vinyl Workspace & Chair Mat For Anti-Static Floors | Conductive ANSI 20.20 | Slip Resistant...
From: $130.00- Protects ESD Flooring & ESD Paint Investment
- Impervious to Damage from Chair Casters
- Great for workstations with Slip Resistant Textured Surface
- Conductive Anti-Static Protection
- Continuous and Permanent Path-to-Ground
- Lifetime Warranty ANSI S20.20 & ANSI S7.1-2005
- Comes in 2 sizes (36"x60" and 48"x72")
EXPERT Clean & Bright Eco Cleaner | Step 1 (LIGHT)| Multi-Purpose Wood Cleaner & Stain Rem...
From: $25.00- Mild alkaline wood cleaner for removing surface stains from unsealed, lightly soiled, or faded wood
- Removes Mold, mildew and algae
- Safe eco-friendly formula- no harsh chlorines or bleaches
- Ideal prep before stain or coating application
- Restores Wood's Natural Beauty
- Remove and cleans organic growth stains; Algae, Mold and Mildew
- Eco-Friendly Formulation for preparing a newer fence or deck for stain
- Multi-purpose Cleaner for untreated and treated wood
- Safe for use on all wood finishes, vinyl and composites
- Easy to Use & Clean Up
- Step 1 (LIGHT) or our 3 Step Process to Get your Project Ready for Expert Stain & Seal
EXPERT Clean & Bright Wood Brightener | Step 2 | Neutralize Wood Surfaces After Cleaning | Surf...
From: $25.00- Brings back the original color of the wood
- Neutralizes and brightens wood after any alkaline chemical wash
- Restores proper pH in wood and opens wood grain to accept more stain
- 100% Oxalic Acid
- Wood Brightener
- Step 2 or our 3 Step Process to Get your Project Ready for Expert Stain & Seal
EXPERT Clean & Bright Wood Cleaner | Step 1 (MILD)| Lifts & Removes Stains | Removes ...
From: $25.00- Effective Alkaline wood cleaner for removing surface stains
- Remove and cleans organic growth stains; Algae, Mold and Mildew
- Removes stains caused by tannins
- Works well on both treated and untreated exterior wood.
- Easy to Use & Clean Up
- Restores Wood's Natural Beauty
- Step 1 (MILD) or our 3 Step Process to Get your Project Ready for Expert Stain & Seal
EXPERT Clean & Bright Wood Stripper | Step 1 (HEAVY)| Oil & Water Base Stain Remover | Rem...
From: $25.00- Removes Oil & Water Based Stains, Latex & Acrylic Paints
- Remove and cleans organic growth stains; Algae, Mold and Mildew
- Easy to Use & Clean Up
- Restores Wood's Natural Beauty
- No Bleach Added
- Step 1 (HEAVY) or our 3 Step Process to Get your Project Ready for Expert Stain & Seal
EXPERT Clean & Bright Wood Stripper Booster | Step 1 (EXTRA HEAVY) | Boosts Effectiveness of Wo...
From: $70.00- Perfect Booster for Wood Strippers when removing water based stains like Behr, Olympic or Superdeck
- Step 1 (EXTRA HEAVY) of our 3 Step Process to Get your Project Ready for Expert Stain & Seal
EXPERT Clean Up Degreaser – Concentrated Pre-Treatment & Oil Stain Remover | Essential St...
From: $80.00- Maximum Concentration Power: Pure concentrate delivers 5x the cleaning power. One gallon makes 5 gallons of working solution
- Dual-Strength Options: Dilute 4 to 1 for standard cleaning, keep undiluted concentrate for tough stain spills on concrete
- Massive Value: No paying for pre-diluted water. One gallon concentrate equals 5 gallons of competitor
- Professional Efficiency: Mix exactly what you need for each project. No waste from large pre-mixed containers.
- Convenient Dispensing: Built in spout allows precise measuring and easy pouring without mess.
- Extended Shelf Life: Concentrated formula stays stable longer than pre-diluted solutions & storage Convenient
EXPERT Clear Wood Stain & Seal | Oil Based Deep Penetrating | Great For Hardwoods & IPE W...
From: $65.00- Clear Protection
- Deep Penetrating Oil Through Entire Wood For Exceptional Protection
- Prevents Drying Out which causes warping and cracking
- Non-Film Forming Won't chip, crack or peel
- Mildew & UV Resistant - Maintains Color
- Water Shedding
- Extreme Climate Can Apply -10°F to 110°F
- Ultra Low VOC < 7 g/L
- Rain-safe soon as 1 hour after applied to fences
- Easy one coat application
- Easy Maintenance - Recoat without stripping, sanding or scraping
- Works on IPE Wood
EXPERT Fence & Barn Paint | 100% Acrylic Agricultural Exterior Paint | Livestock Safe | 5 gallo...
$315.00- Long Lasting Performance
- Excellent Adhesion
- One Coat Coverage
- Durable in Harsh Weather Conditions
- Low VOC
- Formulated to work around Livestock
- Ideal for Wood & Metal Surfaces
- Professional Grade Finish
- Easy Clean up with Soap & Water
EXPERT Log & Timber Oil Fan Deck Samples | 7 Color Samples | Marketing Tool
$65.00- Great Sales Sample and Selling Tool
- Great Way To Visualize all 7 different Log & Timber Oil Stains
- Quickly Show Customers How You Can Make Their Wood Project Look
- Actual Production Stain
- Natural Wood Samples
- Made in the USA
EXPERT Log & Timber Oil Sample Kit | Choose Up to 8 Color Samples
From: $47.00- Sample Sets in 3 (You Select Colors) or all 8 color options
- Hand-Filled Premium Oil
- Professional Mixing System
- Convenient Testing Size of 4 fluid ounces per can
- Complete Range Testing
- Allows testing with EXPERT Stain on your wood project
- Timber Surface Testing
EXPERT Log & Timber Oil Stain | Semi-Transparent | Deep Penetrating | Apply -10°F to 110° | Rep...
From: $115.00- Deep Penetrating Oil Through Entire Wood For Exceptional Protection of Log Homes and wood surfaces
- Outstanding Protection & Color Longevity with double solids vs normal semi-transparent stains
- Superior Pest Protection from Citronella & 8 Essential Oils for outstanding natural defense against carpenter bees or wood boring insects
- Great Looking Semi-Transparent color highlights natural wood grain
- Excellent adhesion and Non-Film Forming Won't chip, crack or peel
- Prevents Drying Out which causes warping and cracking
- Mildew & UV Resistant - Maintains Color
- Water Shedding
- Extreme Climate Can Apply -10°F to 110°
- Safer Application with only 5% solvents results in Ultra Low VOC < 237 g/L
- Rain-safe soon as 1 hour after applied to fences
- Easy one coat application
- Easy Maintenance - Recoat without stripping, sanding or scraping
- 8 Semi-Transparent Color Options
- Works on IPE Wood
EXPERT Natural Defense-Essential Oil Wood Stain Enhancement| Traditional Pest Deterrent Properties
$79.99- Backyard- Safe Formula with low-toxicity alternative
- Essential Oil Blend that Safely Deters Carpenter bees, termites and 12+ outdoor pests
- Works with Any of Our EXPERT Line of Stains Transparent, Semi-Transparent, Semi-Solid and Log & Timber Oil
- Enhance Wood Care
- Pollinator Protection
- Premium Essential Oil Blend
- Dual Application System
- Comprehensive Pest Deterrant
- Pleasant Aroma
EXPERT Next Generation Wood Stripper Pro
$330.00- Multi-Surface Capability: Works on wood, concrete, brick, stone, meta, tile, fiberglass and other substrates
- Low-Odor Professional Formula: Advanced solvent blend minimizes odor while maintaining heavy-duty stripping performance
- No Neutralization Required: Unlike caustic stripping systems, surfaces can be rinsed clean with water after removal
- Flexible Application Methods: Apply by brush, roller or sprayer depending on project size and surface conditions
- Heavy-Duty Coating Removal: Designed to remove multiple layers of stain or paint in a single application when used correctly
- Adjustable Thickness for Different Jobs: Mix until paste consistency for vertical surfaces
EXPERT Semi-Solid Wood Stain & Sealer | Oil Based Deep Penetrating | Extreme Climate Apply -10°...
From: $75.00- Provides a rich color while allowing the natural grain to still come through
- Deep Penetrating Oil Through Entire Wood For Exceptional Protection
- Great Protection for medium to heavy foot traffic decks
- Prevents Drying Out which causes warping and cracking
- Non-Film Forming Won't chip, crack or peel
- Mildew & UV Resistant - Maintains Color
- Water Shedding
- Extreme Climate Can Apply -10°F to 110°F
- Ultra Low VOC < 7 g/L
- Rain-safe soon as 1 hour after applied to fences
- Easy one coat application
- Easy Maintenance - Recoat without stripping, sanding or scraping
- 9 Semi-Solid Color Options
- Works on IPE Wood
EXPERT Semi-Transparent Wood Stain & Sealer | Oil Based Deep Penetrating | Extreme Climate Appl...
From: $65.00- Richer semi-transparent color still highlights natural wood grain
- Deep Penetrating Oil Through Entire Wood For Exceptional Protection
- Prevents Drying Out which causes warping and cracking
- Non-Film Forming Won't chip, crack or peel
- Mildew & UV Resistant - Maintains Color
- Water Shedding
- Extreme Climate Can Apply -10°F to 110°F
- Ultra Low VOC < 7 g/L
- Rain-safe soon as 1 hour after applied to fences
- Easy one coat application
- Easy Maintenance - Recoat without stripping, sanding or scraping
- Works on IPE Wood
- 5 Semi-Transparent Color Options
EXPERT Stain & Seal Fan Deck Samples | 18 Color Samples | Marketing Tool
$65.00- Great Sales Sample and Selling Tool
- Great Way To Visualize all 18 different Transparent, Semi-Transparent and Semi-Solid Stains
- Quickly Show Customers How You Can Make Their Wood Project Look
- Actual Production Stain
- Natural Wood Samples
- Hand-Made in the USA
EXPERT Stain & Seal Sample Kit | Choose Up to 19 Wood Stain Color Samples
From: $47.00- See your real color results before buying gallons- no surprises
- Custom Pick Sample of real EXPERT Stain & Seal in 3, 6 or 19 color options
- See real colors on your actual wood type
- Choose from 19 rich, penetrating colors
- Helps you match your fence, deck, pergola or wood siding
- Oil-based, deep penetrating color — long-lasting protection
- Fast shipping — decide your color sooner
- Made in the USA
- Convenient Testing Size of 4 fluid ounces per can
- Allows testing with EXPERT Stain on YOUR wood project
EXPERT Transparent Wood Stain & Sealer | Oil Based Deep Penetrating | Extreme Climate Apply -10...
From: $65.00- Great Looking transparent color which highlights the natural wood grain
- Deep Penetrating Oil Through Entire Wood For Exceptional Protection
- Prevents Drying Out which causes warping and cracking
- Non-Film Forming Won't chip, crack or peel
- Mildew & UV Resistant - Maintains Color
- Water Shedding
- Extreme Climate Can Apply -10°F to 110°F
- Ultra Low VOC < 7 g/L
- Rain-safe soon as 1 hour after applied to fences
- Easy one coat application
- Easy Maintenance - Recoat without stripping, sanding or scraping
- 4 Transparent Color Options
- Works on IPE Wood
Extension Pole 4′-8′ ft
$75.00- Attach 9" or 18" roller frames to this versatile pole to install beautiful floor coatings or extend reach on vertical walls
- The pole extends from 4 to 8 feet
- Roller Frames sold separately
Extreme Bond Primer For Interior Exterior Hard Slick Glossy Wall Surfaces
- Promotes adhesion and bonding on hard to paint surfaces
- Glazed Tile, Plastic, Glass, Fiberglass, Glossy Surfaces, Kitchen Cabinets
- Tightly bonds to slick and glossy surfaces
- Assures uniform appearance of topcoats
- One coat application
- Fast dry
- Use as bonding primer with Cool Coat Thermal Barrier Paint
- Topcoat With Hi-Performance coatings such as epoxy, polyaspartic, urethanes, lacquers and both oil and water based acrylics
EZ- Bond Primer | Excellent Adhesion & Corrosion Protection | Self- Leveling | Primer for Galva...
From: $85.00- Used on practically any surface
- Excellent Adhesion
- Corrosion Protection
- Self-Leveling Product
- Eco-Friendly Formula
- Concrete, Drywall, Masonry, Wood, Stucco and Fiberglass Applications
- Galvanized Metal and Aluminum Applications
- Topcoat with wide variety of high-performance topcoats like Urethanes, Alkyds, Latex, Acrylic and Epoxy
EZ-Coat Smooth Acrylic Coating | Metal, Wood, Concrete | Smooth Finish | Scratch Resistant
From: $60.00- Excellent flow rate for an Easy application
- Flexible and not brittle
- Easy to touch up or maintain
- Low Odor
- Low VOC
- Scratch Resistant Finish
- Protects Substrates from weathering - UV & Moisture
- Smooth Finish
- Interior and Exterior Surfaces
EZ-Coat Textured Acrylic Coating | Metal, Wood, Concrete | Textured Finish | Scratch Resistant
From: $60.00- Excellent flow rate for an Easy application
- Flexible and not brittle
- Easy to touch up or maintain
- Low Odor
- Low VOC
- Scratch Resistant Finish
- Protects Substrates from weathering - UV & Moisture
- Textured Finish
- Interior and Exterior Surfaces
Fan Deck Marketing Tool | Flakes & Chips | Quartz Granules | Epoxy Pigment | Metallics Pigments
$55.00- Great Sales Sample and Selling Tool
- Great Way To Visualize 52 different floor colors and flake options
- Quick Way To Show Customers How You Can Make Their Floor Look Great
- 52 Different Color Choices & Blended Flakes From Floorguard Products
Fastonite E700 Heavy Duty Pool & Fountain Coating | Fiberglass | Concrete | Shotcrete | Gunite ...
From: $90.00- Swimming Pools / Fountains : Designed for use on fiberglass and plaster pools subject to chlorine and UV exposure
- VOC free
- 100% Solids System
- Ambient Curing
- High Chlorine Resistance
- Good wear protection to foot traffic
FeltPen Graffiti Shadow Stain Remover & Concentrated Cleaner | Paint, Ink, Dye, Organic Stains
From: $39.00- Unique UV sensitive formulation draws inks and other stains out of surfaces.
- Can be used while BARE BRICK STONE & MASONRY REMOVER or SENSITIVE SURFACE REMOVER is still on the stain OR after dissolving as much of the graffiti as possible using these removers (choice of remover depends on type of substrate.)
- Excellent for removing leather dyes and inks that have shown resistance to removers, ‘burnt into’ / stained paintwork or coated surfaces, or wrapped into porous surfaces creating a stain.
- When diluted, creates a highly active cleaner for use cleaning smoke films, greasy marks, carbon deposits, food spills, mold, fungi, and other soilage.
- Biodegradable
Flake Sales Sample Kit With Real Vinyl Flakes | 145 Solid Colors | 9 Signature Blends
$75.00- Great Sales Sample and Selling Tool
- Actual Loose samples of all 145 solid colors flakes available and 9 popular Signature factory blends
- Samples of all 6 size flake options from 1/32" to 1"
- Great way to help create and visualize your own unique custom flake blend
- Quickly Show Customers How You Can Make Their Floor Look Great using decorative Vinyl Flakes
Flat Floor Squeegee (case of 6) For Epoxy and Polyaspartic Coatings | 2 Sizes
From: $160.00- Your choice of 18" and 24" Sizes
- Comes in economical case quantity 6
- For Quicker and Easier Application of thinner mil (thickness) floor coating systems
- Steel back and steel handle socket
- Stiff Grey rubber blade
- Makes installing floors a breeze
- This Squeegee is the best for installing medium and heavy bodied resins
Floor-lok Concrete Floor Sealer and Curing Aid Concentrate
$179.00- Concrete Floor Sealer, Dustproofer, Curing Aid
- Clear Silane Siloxane Formula
- Penetrating Leaves No Film
- Will Not Yellow
- Water Base, Low VOC, Eco-Friendly
- 1 Year Labor / Material Warranty
- Specified by Architects in 099123
Floorguard Sales Samples on Hard 5″x5″ Boards of Flake/Chip & Pigment Color Options...
$425.00- Great Sales Sample and Selling Tool
- 66 Hard 5" x 5" Actual Color and Flake/Chip Samples
- Great Way To Visualize 66 different floor colors and flake options from Floorguard Products
- Quickly Show Customers How You Can Make Their Floor Look Great
Fluorescent (Black Light) Flakes for Epoxy, Polyaspartic, Urethane Coatings
From: $3.00- Adds a Bright Colorful look to any epoxy, polyaspartic, polyurea, urethane Indoor flooring project
- Dramatic & Vibrant Appearance when subject to Black Lights!
- 6 Different Florescent Colors
- 1/4" Standard & 5 options: 1/32", 1/16", 1/8", 1/2", 1"
- Hide sub-surface imperfections
- Add as an accent to any vinyl chip/flake blend
- Create your own custom florescent blend for a completely florescent look
- USE OUR COLOR VISUALIZER TO SEE WHAT YOUR CUSTOM BLEND WILL LOOK LIKE
Quantity Discounts AvailableSOLD IN 5 LB BOX
Garnet Anti-Slip Additive| BROWN | 36 Grit | Non-Skid Tough Durable Floor
From: $35.00- Adds very tough skid resistance & texture profile to a surface
- Works well with high performance 2 part pigmented floor coatings
- Non-reactant – will not interfere with your coatings
- Well bonded into the body of the coating
- Long lasting for extended anti-slip performance
- Cost–effective – highly effective
- Non-toxic – inert and natural, crystalline silica levels are less than 1%
- Comes in the most popular 36 grit size
- Low Cost alternative to white colored aluminum oxide for only slightly less level of anti-slip performance
GasPruf E132 Reinforced Epoxy Coating
From: $215.00- Anticorrosive Coating: "Super-Duty" anticorrosive for in-service fuel storage tank interiors and roofs
- Repair Compound: Patching, leak sealing etc. above and below water or hydocarbon fuels
- Displaces water or hydrocarbons such as gasoline or diesel fuel from wetted surfaces
- Solvent Free
- 100% Solids
Gauge Rake 24 in “Sled Type” For Smooth Application Cementitious, Slurry, Thick Coatings
$50.00- Apply high build urethane and epoxy slurry, mortar and coatings and cementitious materials at a precise, predetermined uniform depth
- T-Skates adjust from 0 to 2 inches
- Thin sleds make a minimal disturbance in application
- Tool is lightweight, yet sturdy
- 24" wide
Gloss Sealer For Masonry and Wood | Premium Grade Acrylic
From: $45.00- Premium Grade Sealer and Water Repellent Offering a Nice Glossy Look
- For Concrete, Masonry, Brick, Wood
- Use on Painted or Unpainted Surfaces
- Adds Stain Resistance for Easier Cleanup
- Clear Finish Will Not Yellow
- To 5 Year Satisfaction Guarantee
- Eco-Friendly and Easy To Apply
Glow Anti- Slip Sand Sample Kit | Aqua, Blue & Green | Photoluminescent for Floor Coatings
From: $48.00- Ideal for use with epoxies, polyaspartics, urethanes and polyurethanes
- Mix with clear epoxies and concrete sealers to create glow in the dark floors
- For use in both indoor and outdoor projects
- Fine Sand Texture
- Provides light anti- slip texture to floor coating
- High Temperature Resistance
- Anti-Slip Glow Sand Kit comes in Green (30 grit), Blue (65 grit) and Aqua (110 grit)
Graff-Attak-Pak | Bundle Graffiti Removal Kit | Biodegradable
$185.00- Highly effective biodegradable professional grade graffiti remover
- Stays wetter longer ensuring maximum dwell time, making it ideal for hot weather removals.
- Great for porous concrete, brick, stone, wood as well as removing graffiti from tough split faced block, cinder block and exposed aggregate surfaces
- Safe and effective for use on all types of natural stone (such as limestone, granite, and marble), stainless steel, trees, plastics, and playground equipment
- Virtually odorless and non toxic.
- Easily rinsed with a small pressure washer requiring very little rinsing water. (Any resultant run off is a readily biodegradable gray water soap which can be left to biodegrade, recycled or further diluted for use in gardens etc.)
- No shadows, no damage, no harsh scrubbing required.
- Safe and effective for removals on asphalt roads
Graffiti Removal Spray Can & Wipe Value Pack
$500.00- All in one solution for effective Graffiti Removal
- Save Money with this Bundle
- Ideal for cities, schools, facilities, grounds maintenance, DIY property owners and contractors
- Training materials included
- Highly effective biodegradable professional grade graffiti remover
- Great for porous concrete, brick, stone, wood as well as removing graffiti from tough split faced block, cinder block and exposed aggregate surfaces
- Safe and effective for use on all types of natural stone (such as limestone, granite, and marble), stainless steel, trees, plastics, and playground equipment
- Virtually odorless and non toxic.
- Easily rinsed with a small pressure washer requiring very little rinsing water. (Any resultant run off is a readily biodegradable gray water soap which can be left to biodegrade, recycled or further diluted for use in gardens etc.)
- No shadows, no damage, no harsh scrubbing required.
- Safe and effective for removals on asphalt roads
Graffiti Safewipes | Quick, Easy Graffiti Removal | Smooth Surface | Pen, Crayon, Markers, Paint
From: $37.00- Versatile multi-use towelette for quick and easy removal of graffiti and other marks from painted and smooth surfaces
- Fast acting, non-damaging formula encapsulates and suspends graffiti and other marks so you can wipe away easily without smearing / smudging or re-depositing into coated surface
- Pleasant smelling and non toxic
- Safe and effective to use on most smooth surfaces
- BIODEGRADABLE liquid
- Cleans and disinfects (kills) staphylococcus, streptococcus, E. coli and salmonella
- Comes in convenient multi-pack containers of 20, 30, 70 wipes for easy transport
Green Safety Glow in the Dark Tape | Stairways, Steps, Emergency Exit, Walkways, Ramps | 24 Hour Glo...
From: $19.95- Glow time is 24 hours
- Suitable for Indoor and Outdoor Applications
- Water Resistant
- Works on wood, vinyl, plastic, leather, metal and laminate
- Excellent adhesion, rechargeable and clean removal
- Meets Glow Time required by the International Building Code
Grip E751 | Annulus Void Filler | High Temperature Tolerant | Long Working Time
$1,600.00- Fills large void areas and annulus
- Low exotherm and low viscosity
- Solvent Free Formulation
- No VOC or odor concerns
- Long Pot Life
- Ability to work in High Temperature Climates
GroundWorx Basics (SF) ESD Static Conductive Epoxy Floor Coating | Water Based | ANSI/ESD S20.20-201...
From: $1,083.00- Conductive 2 Part Water Based Thin Film Epoxy Floor Coating
- Conductive range 2.5 x 104 - 3.5 x 107 ohms
- System Resistance (w/ ESD Footware) < 3.5 x 107 (fully compliant) ANSI/ESD STM 97.1
- Warrantied ANSI S20.20 performance
- Meets ANSI/ESD S20.20-2014 (S97.1 and S97.2), DOD 4145.26M, HDBK263A
- Easy to Install
- For Concrete, Wood, VCT Tile Floors
- Use in Electronics Mfg, Assembly, ESD Protected Areas
- 6 Colors. Pewter Gray Color available for immediate shipment
GroundWorx Basics (SF) ESD Static Dissipative Epoxy Floor Coating | Water Based | ANSI/ESD S20.20-20...
From: $1,083.00- Static Dissipative 2 Part Water Based Thin Film Epoxy Floor Coating
- Static Dissipative 10e6 to 10e9 ohms
- Warrantied ANSI S20.20 performance
- Meets ANSI/ESD S20.20-2014
- Easy to Install
- For Concrete, Wood, VCT Tile Floors
- 6 Colors.
- Static Dissipative version of Groundworx is special order 4-5 week lead time. Most projects use the Conductive Version of GroundWorx with immediate shipment of Pewter color
GroundWorx Ultra (HB-97.2) ESD Static Conductive Epoxy Basecoat 100% Solids | Forklift Traffic | ANS...
From: $555.00- Static dissipative or conductive high build epoxy electrical protection when used with the GroundWorx Ultra ESD Urethane Topcoat which comes in either dissipative >1.0 x 10e6 ohms or conductive <1.0 x 10e6 ohms electrical resistance, limiting Static Charge Generation to <15 volts
- Great for high traffic, high wear commercial & industrial applications as high build 14 mil ESD system at <$4.00/sq' material cost
- Use on Concrete, Wood and old VCT surfaces
- Moisture tolerant primer
- Excellent adhesion 350 psi
- 100% solids, 0 g/L voc
- Conforms to ESDA, ANSI standard S20.20-2014 when used with GroundWorx Ultra ESD Urethane Topcoat
- Gloss sheen
- 8 standard colors & custom colors available
GroundWorx Ultra (HB-97.2) ESD Urethane Top Coat | Static Dissipative or Conductive | ANSI S20.20-20...
From: $1,350.00- Optional Static conductive <1.0 x 10e6 ohms or Dissipative >1.0 x 10e6 ohms and <1.0 x 10e9 high performance electrical protection, limiting Static Charge Generation to <15 volts
- Great for high traffic, high wear commercial & industrial applications as high build 14 mil ESD system at <$4.00/sq' material cost
- Conforms to ESDA, ANSI standard S20.20-2014 when used with GroundWorx Ultra ESD Epoxy Primer
- Use on Concrete, Wood and old VCT surfaces
- Tough surface: impact resistance 140 psi and tabor abrasion test 25 mg loss
- Surface: Anti-slip, ROHS compliant
- No wax required – easy to keep clean
- Satin to Semi-gloss sheen
- 8 standard colors & custom colors available
- Each 2 gallon kit includes 8 oz anti-slip clear glass beads for improved safety in wet conditions
GroundWorx Ultra Elevated Moisture Epoxy Primer | For Use In GroundWorx Ultra Epoxy Systems | Zero V...
$650.00- Protects ESD Coatings System from moisture related issues (withstands up to 8lbs of moisture vapor pressure)
- Apply when relative humidity is up to 95%
- Significantly reduce chance of concrete outgassing
- Great for high traffic (forklift & pallet jack), high wear commercial & industrial applications
- Conforms to ESDA, ANSI standard S20.20-2014 when used with the GroundWorx Ultra ESD Epoxy Basecoat
- Concrete Applications
- Zero VOC
GT 6759 100% Silicone Roof Coating
$300.00- Ready to Use
- Highly Elastomeric
- Breathable membrane
- Superior weather and wat er resistance properties
- Excellent, long term durability
- Solvent and chemical resistant; UV Stable
- High Temperature Resistance (up to 350F)
- Reflects more sunlight than a traditional roof
- Solvent free/ diluent free
- Higher solids content
- less material needed and time saving due single coat applications
- Due to the high solids content, no pinholes or mud cracks appear after curing
- 100% silicone polymer, allowing it to expand and contract helping prevent leaks that may result in mold, mildew, wood rot and rust
- Withstands UV degradation
- Environmentally friendly
GT 6783 Low Solids Silicone Roof Coating
$290.00- More economical price per bucket
- Easier to spray and no need for specialized equipment
- Better sag resistance on sloped surfaces where two coat application is preferred such as high-sloped roofs and spray foam roofs
- Perfect for two-coat substrates
- Low solids coating can be used on existing asphalt roofs if an effective bleed block barrier is used to prevent the mineral spirits form attacking the asphalt
- An epoxy primer could be used for this purpose
- A low solid coating can be used without a primer on a single ply deck such as TPO, PVC, PPO , EPDM. The mineral spirits will cause the deck to swell improving adhesion.
- Ready to Use
- Highly Elastomeric
- Breathable Membrane
- Superior weather and water resistance properties
- Excellent ,long term durability
- Solvent and chemical resistant; UV stable
- High temperature resistance up to 350F
GT 6895 High Solids Silicone Roof Coating – High Build
$310.00- Can be applied up to 40 mils in single pass on roofs and vertical walls when needed
- 100% silicone polymer, allowing it to expand and contract helping prevent leaks that may result in mold, mildew, wood rot and rust
- Ability to achieve a coating of 40 mils in one pass
- Ready to Use
- Highly Elastomeric & breathable membrane
- Superior weather & water resistance properties
- Excellent, long term durability
- Chemical Resistant and UV Stable
- High Temperature Resistance up to 350F
- Reflects more sunlight than a traditional roof ; absorbs less solar energy
- Solvent Free & diluent free
- Higher solids content
- Less material needed and time saving due single coat applications
- Due to the high solids content, no pinholes or mud cracks appear after curing
- Withstands UV degradation
- Environmentally friendly
H20 HyperPRIME Epoxy Quick Cure Bonding Primer | Low Temp 45°F | 3 Hr Recoat
From: $40.00- Excellent Substrate Penetration with superior adhesion 450 psi
- Great for concrete, wood and metal surfaces
- Helps protect Against Coating Damage from Outgassing of Concrete
- Quick Cure With 3 Hour Recoat Time - great for 1 day floor coating systems
- Available in Clear plus 6 Colors
- Water Base, No Offensive odors
- Cold temperature application down to 45F
- Good chemical and Stain Resistance
- Easy Application
H20 zioTHANE Low Gloss Urethane Concrete Floor Sealer / Topcoat
From: $89.00- Tough, Durable Concrete Floor Sealer
- Topcoat for Epoxy Floor Coatings
- Excellent Chemical and Abrasion Resistance
- Exceptional Impact Resistance
- Aliphatic, UV Stable and Will Not Yellow
- Beautiful Clear, Low Gloss Appearance
- Designed for High Traffic and Industrial Areas
- Water Based, Low voc <10 g/L
H20 ZioTHANE Semi-Gloss Urethane Concrete Floor Sealer/Topcoat
From: $89.00- Tough, Durable Concrete Floor Sealer
- Topcoat for Epoxy Floor Coatings
- Excellent Chemical and Abrasion Resistance
- Exceptional Impact Resistance
- Aliphatic, UV Stable and Will Not Yellow
- Beautiful Clear, Semi Gloss Appearance
- Designed for High Traffic and Industrial Areas
- Water Based, Low voc <10 g/L
HDK H18 Fumed Silica Thickening Agent For Epoxy Concrete Crack and Joint Repair | (10kg) 22 lbs | W...
$475.00- Great thickening agent for use with wide range of epoxy, polyurethane and other coatings
- Allows coatings to be used as great concrete crack, hole, spall and control joint repair for larger projects
- When mixed into fast acting products, makes for very quick repairs
- Many other industrial uses
- Comes in (10 kg) 22 lb bags
****TRUCK FREIGHT SHIPPING ONLY - ONLY SELL IN LOTS OF 5 BAGS****
Heel Grounders for ESD Floor Protection
From: $35.00
Heritage Graffiti Remover | For Sensitive Historic Important Buildings | Stonework Brickwork Masonry...
From: $39.00- Fast-acting penetrating formula encapsulates and dissolves spray can and other stains from behind as well as the front.
- Easily rinsed with a small pressure washer requiring very little rinsing water. Any resultant runoff is a readily biodegradable gray water soap which can be left to biodegrade. Recycled or further diluted for use in gardens etc.
- No shadows, no damage, no harsh scrubbing required.
- Pleasant smelling and nontoxic.
- Safe and effective to use on all types of natural stone (such as limestone, granite, and marble), stainless steel, trees, plastics, and playground equipment.
- May be used on painted surfaces as well as natural surfaces.
- Biodegradable
Copyright 2024 by Exterior Performance Coatings LLC