Call us (630) 675-4509
Show
Filter by
Filter by
1007 Polyurea Coating Fast Set Waterproof Spray | Elastomeric 100% Solids
$7,326.00- 100% Pure Polyurea Waterproof Spray Coating
- Fast 10-30 Sec Set Time - Quick Back In-Service
- Flexible Elastomeric Spray 600%+ Elongation
- Excellent Chemical, Abrasion Impact Resistance
- Unlimited mil/coat & unlimited recoat window
- Use on Concrete, Metal, Wood
- Good for Garages, Marine Enviroments, Secondary Containment, Industrial Applications
4020 ESD Neutralizer Cleaner Concentrate
From: $200.00- Great Anti-Static Neutralizer Cleaner
- For Concrete, Tile, Metal, Glass, Porecain
- Economical Concentrate 128:1
- Biodegradeable and Safe for Sewage Septic Systems
- Low Foam
- Non-Abrasive, No Streaking or Film Forming
4030 ESD Neutralizer Cleaner Ready-to-Use
From: $90.00- Great Anti-Static Neutralizer Cleaner
- For Concrete, Tile, Metal, Glass, Porecain
- Ready-to-Use
- Biodegradeable and Safe for Sewage Septic Systems
- Low Foam
- Non-Abrasive, No Streaking or Film Forming
Hot
5500 Polyaspartic Polyurea Coating Roll Down Low Temp 30°F | 87% Solids
From: $149.00- Beautiful Decorative High Gloss Appearance
- Cold Temperature Application to 30F using Fast Set
- Easy Squeegee/Roller Application
- Waterproof, Aliphatic Resists UV Non-Yellowing
- Indoor & Outdoor Floor and Countertop Projects
- Good In Submerged Service Projects Like Fountains
- Works well on concrete, brick, steel, wood, fiberglass
- Excellent Chemical & Abrasion Resistance
- Highly Adhesive, Flexible & Non-Brittle
- Optional Fast or Slow Set, High Heat & Humidty
- Great For Garage Floors Using Chips & Flakes
- Commercial and Industrial Applications
- Use as Stand Alone System or Topcoat to Epoxy
6007 Wet Condition Epoxy For Concrete & Steel | Low Temp 35°F
From: $593.00- Protect Problem Wet and Damp Areas
- Withstands to 20 PSI Hydralic Vapor Pressure
- Cold temperature down to 35°F
- Designed to Protect both Concrete and Steel
- Use as Primer With Topcoat or Floor Coating
- Offers Excelllent Moisture and Corrosive Protection with Outstanding Adhesion
- 100% Solids, no VOC, 2 Component
Hot
6009 Epoxy Floor Coating Industrial & Commercial Low Temp 35°F | 100% Solids | Quick Cure
From: $115.00- Commercial, Industrial, Residential Concrete Floors
- Cold temperature down to 35°F
- Tough - Attractive Looking Epoxy
- Good Chemical, Abrasion, Impact Resistance
- Quick 4 to 7 hour set time
- Self Priming With No Primer Required
- 100% Solids, no VOC, 2 Component
- Clear or Selection of Colors
- Excellent Protection at Lower Cost
800 Slow Set Polyurea Adhesive Sealant & Caulk
From: $146.00- Self Leveling, Tough, Flexible, Sandable, Paintable
- Chemical and Fuel Resistant Polyurea
- Repair Concrete Cracks
- Seals Plastic Connectors and Fittings
- For Metals, Plastics, Fiberglass, Steel, Wood, Urethane, Polyurea, Concrete
- 100% Solids, no VOC, 2 Component
- Option for easy application using twin cartridge kits and 300 ml x 300 ml cartridge gun
830 Fast Set Polyurea Repair | Joint Sealant | Caulk | Adhesive | No Sag Walls | Concrete | Steel | ...
From: $146.00- Tough, Flexible, Fast Set, Sandable, Paintable
- Bonds to Concrete, Steel, Wood, Plastic, Fiberglass, Polyurea, Urethane
- Repair Concrete Floors & Walls - Holds Vertical Bead
- Chemical and Fuel Resistant Polyurea
- Cold weather application down to -20F
- Seal Plastic Connectors, Fittings
- Quick, Easy, Effective Repair of Concrete Cracks
- 3 Set Times Hard in 10 min, 15-20 min, 30-40 min
- 100% Solids, no VOC, 2 Component
- Option for easy application using twin cartridge kits and 300 ml x 300 ml cartridge gun
Advanced Waterproofer Multi-Surface 10 Yr Water Repellent
From: $20.00- Designed For Homeowners Wanting Superior Protection Against Moisture and Stains
- 10 Year Premium Water Sealer
- Unpainted Porous Concrete, Block, Brick, Wood, Stone
- Clear Finish, Will Not Yellow
- Water Base, Low VOC, Eco-Friendly
- Easy To Apply
Bare Brick, Stone & Masonry Graffiti Remover | Highly Effective All Purpose Tag Removal | Biode...
From: $37.00- Highly effective biodegradable professional grade graffiti remover
- Great for porous concrete, brick, stone, wood as well as removing graffiti from tough split faced block, cinder block and exposed aggregate surfaces
- Safe and effective for use on all types of natural stone (such as limestone, granite, and marble), stainless steel, trees, plastics, and playground equipment
- Requires minimal rinsing and any resultant run-off is a readily biodegradable gray water soap that can be left to biodegrade, recycled or further diluted for use in gardens, etc.
- No shadows, damage or harsh scrubbing required
- Pleasant smelling and nontoxic.
- Removes graffiti on painted surfaces as well as natural building surfaces after first wetting surface with water.
Blok-lok Silane Siloxane Vertical Wall Water Repellent | Concrete Brick Block Stucco
From: $28.00- Professional Grade Vertical Water Wall Sealer
- ASTM Tested to Stop 98 mph Wind Driven Rain
- Clear Penetrating, No Change in Appearance
- Water Base, Low VOC, Eco-Friendly
- 5 Year Labor & Material Warranty
- Specified by Architects in 03300, 04220, 07190
Blok-Lok With Graffiti Control & Water Repellent For Porous Wall Surfaces
From: $61.00- Protect Unpainted Walls From BOTH Graffiti Attacks & Wind Driven Rain in ONE Product
- Save Time & Money Using Less Labor
- Flat Sheen for Little Change in Appearance
- Water Based, Low VOC, Eco-Friendly
- Up to 10 Year Warranty
- Specified by Architects in 07190 / 099623
Chalky Wall Sealer and Clear Acrylic Primer
From: $23.00- Prevent Efflorescence, Seal Chalked Surfaces, Improve Adhesion of Topcoat
- For Concrete, Masonry, Wood
- Unpainted and Painted Surfaces
- Water Base, Low VOC, Eco-Friendly
- 3 Year Warranty
- Professional Grade
CLEAR-SEAL 100% Urethane High Gloss Super Premium Sealer
From: $176.00- High Gloss Super Premium Sealer
- Hot Tire Pickup & UV Resistant
- Great For Driveways, Walkways, Decks, Wall Murals
- Water Base, Low VOC, Eco-Friendly
- Chemical and Spill Resistant
- Excellent Adhesion
- Anti-Slip Finish Available
- For Concrete, Brick, Pavers, Stone, Unglazed Tile and Wood
- Specified by Architects in 099123, 099723, 099313
CLEAR-SEAL 100% Urethane Low Gloss Super Premium Sealer
From: $176.00- Low Gloss Super Premium Sealer
- Hot Tire Pickup & UV Resistant
- Great For Driveways, Walkways, Decks, Wall Murals
- Water Base, Low VOC, Eco-Friendly
- Chemical and Spill Resistant
- Excellent Adhesion
- Anti-Slip Finish Available
- For Concrete, Brick, Pavers, Stone, Unglazed Tile and Wood
- Specified by Architects in 099123, 099723, 099313
CLEAR-SEAL High Gloss Acrylic Urethane Sealer
From: $79.00- High Gloss Premium Sealer
- Hot Tire Pickup & UV Resistant
- Great For Driveways, Walkways, Decks, Wall Murals
- Water Base, Low VOC, Eco-Friendly
- 5 Year Labor & Material Warranty
- Specified by Architects in 099123
CLEAR-SEAL Low Gloss Acrylic Urethane Sealer
From: $84.00- Low Gloss Premium Sealer
- Hot Tire Pickup & UV Resistant
- Great For Driveways, Walkways, Decks, Wall Murals
- Water Base, Low VOC, Eco-Friendly
- 5 Year Labor & Material Warranty
- Specified by Architects in 099123
Color-lok Semi-Transparent Acrylic Siloxane Stain Tint Base
From: $60.00- Penetrating Formula Does Not Chip Crack Peel
- Flat Sheen Means No Lap Marks and Rich Uniform Semi-Transparent Appearance
- For Concrete, Masonry, Wood, Surfaces
- Great Moisture Protection
- Water Base, Low VOC, Eco-Friendly
- 5 Year Labor / Material Warranty
- Specified by Architects in 07150 / 09900
Color-lok Semi-Transparent Acylic Siloxane Stain
From: $66.00- Penetrating Formula Does Not Chip Crack Peel
- Flat Sheen Means No Lap Marks and Rich Uniform Semi-Transparent Appearance
- For Concrete, Masonry, Wood, Surfaces
- Great Moisture Protection
- Water Base, Low VOC, Eco-Friendly
- 5 Year Labor / Material Warranty
- Available in 3 Pre-Mixed Colors
- Specified by Architects in 07150 / 09900
Color-lok Solid Color Acrylic Siloxane Stain Tint Base
From: $61.00- Penetrating Formula Does Not Chip Crack Peel
- Flat Sheen Means No Lap Marks and Rich Uniform Solid Color Appearance
- For Concrete, Masonry, Wood, Surfaces
- Great Moisture Protection
- Water Base, Low VOC, Eco-Friendly
- 5 Year Labor / Material Warranty
- Specified by Architects in 07150 / 09900
Color-lok Solid Color Acylic Siloxane Stain
From: $66.00- Penetrating Formula Does Not Chip Crack Peel
- Flat Sheen Means No Lap Marks and Rich Uniform Solid Color Appearance
- For Concrete, Masonry, Wood, Surfaces
- Great Moisture Protection
- Water Base, Low VOC, Eco-Friendly
- 5 Year Labor / Material Warranty
- Available in 3 Pre-Mixed Colors
- Specified by Architects in 07150 / 09900
E139FL Flexible Epoxy Primer & Floor Coating | 60% Elongation | 100% Solids | Indoor & Out...
From: $65.00- Exceptionally flexible epoxy with 60% elongation
- High Build up to 50 mils thick per coat
- 100% Solids Commercial Epoxy
- Excellent Adhesion 450 psi
- Tough Abrasion resistant Only 6 mg loss (Tabor test) and 160 inch lbs Gardner variable impact test
- For use with broadcast systems and as flexible membrane primer
- Wide Variety of 15 Colors
E5013 Fast Set Clear Epoxy Primer WB Concrete | Wood | Masonry
From: $60.00- Versatile product good on concrete, masonry, wood surfaces
- Quick 4-6 hour Recoat for same day projects
- Excellent as clear primer for epoxy, polyaspartic and urethane coating systems
- Helps prevent concrete outgassing problems when used as primer
- Long 2 hour pot life
- Excellent adhesion 425 psi
- Good chemical and abrasion resistance
- Water base
E811FP Acrylic Self Plasticizing Roof Coating | Monolithic Flexible Membrane
From: $240.00- Exceptionally tough, flexible 1 part acrylic roof coating
- Excellent adhesion for Concrete, Wood and Metal
- Tough surface, holds up to normal foot traffic
- Excellent weathering pass ASTM G93 for 9,000 hrs
- Excellent UV stability
- Resists growth of mildew
- Excellent flexibility 415% Elongation
- Resists cracking, splitting with building movement
- Available in 6 colors
- Underwriters Laboratories (UL) Tested & Certified
E812 Acrylic Self Plasticizing Roof Coating | Monolithic Flexible Membrane
From: $225.00- Tough, flexible budget friendly 1 part acrylic roof coating
- Good adhesion for Concrete, Wood and Metal
- Tough surface, holds up to normal foot traffic
- Excellent weathering pass ASTM G93 for 9,000 hrs
- Excellent UV stability
- Resists growth of mildew
- Good flexibility >200% Elongation
- Resists cracking, splitting with building movement
- Available in 6 colors
E814CP Co-Polymer Flat Roof Coating | 11 Color | Flexible | Waterproof
From: $71.00- Exceptionally tough, flexible 1 part SEBS Based waterproof coating
- Great for both Flat & Sloped Roofs
- Excellent adhesion EPDM, APP, TPO, Hypalon, BUR, Fiberglass, PVC, Polyurethane Foam, Concrete, Wood, Metal
- Excellent waterproof with E96 Vapor Transmission Class I 0.025 perms and Water Absorption 0.04%
- Excellent weathering
- Excellent UV stability
- Good resistance to dirt pickup
- Excellent low temp flexibility 500%+ Elongation
- Resists mildew and fungi growth
- Good resistance to Alkalis and acids
- Available in 11 Colors
- Underwriters Laboratories (UL) Tested & Certified
- Class A Fire Rated
E814R Co-Polymer Liquid Rubber Roof Walkway Coating | Slip Resistant
From: $76.00- Exceptionally tough, durable one part waterproof roof walkway
- Offers excellent anti-slip walking surface
- Excellent adhesion EPDM, APP, TPO, Hypalon, Concrete, Wood, Metal
- Available in 12 colors
- Excellent waterproof with E96 Vapor Transmission Class I 0.025 perms and Water Absorption 0.04%
- Excellent weathering
- Excellent UV stability
- Good resistance to dirt pickup
- Excellent low temp flexibility with 500%+ Elongation
- Resists mildew and fungi growth
- Good resistance to Alkalis and acids
E814RCP Co-Polymer White Flat Roof Coating | Reflect Solar Heat | Flexible | Waterproof
From: $69.00- Exceptionally Tough, Heat Reflective, 1 Part SEBS Based Waterproof Coating
- Great for Flat & Sloped roofs
- Excellent adhesion to EPDM, APP, TPO, Hypalon, BUR, Fiberglass, PVC, Polyurethane Foam, Concrete, Wood, Metal surfaces
- Reflective white color reduces energy costs with Solar Reflectance 82.5% and SRI 102 (solar reflective index)
- Excellent waterproof E96 Vapor Transmission Class I 0.025 perms & Water Absorption 0.04%
- Excellent weathering
- Excellent UV stability
- Good resistance to dirt pickup
- Excellent low temp flexibility 500%+ Elongation
- Resists mildew and fungi growth
- Good resistance to Alkalis and acids
- Underwriters Laboratories (UL) Tested & Certified
- Class A Fire Rated
E915HD Heavy Duty Cleaner Degreaser Concentrate | 100% Biodegradable
From: $37.00- Heavy duty cleaner formulated for versatility and dependability.
- Rapidly removes dirt, grease and grime from wide variety surfaces
- Compatible with most industrial floor coatings incl Epoxies, Polyaspartics, Urethanes
- Dissolves and removes food grease and many industrial oils and greases
- Use as general-purpose cleaner, floor cleaner, wax and floor finish stripper, engine degreaser and many other cleaning problems.
- 100% Biodegradable
- No caustics, butyl ethers, or chlorinated and petroleum based solvents
- Use by hand or through steam or pressure cleaning equipment, automatic floor scrubbers, etc
- Economical Concentrate Formula. Dilution rates to 1:50 for sensitive surfaces
E916MF Multi-Functional Heavy Duty Cleaner Concentrate | Floors Walls Equipment
From: $28.00- Rapidly removes dirt, grease and grime from wide variety surfaces
- Dissolves and removes food grease and many industrial oils and greases
- Use as general-purpose cleaner, floor cleaner, wax and floor finish stripper, engine degreaser and many other cleaning problems.
- Use by hand or through steam or pressure cleaning equipment, automatic floor scrubbers, etc
- Economical Concentrate Formula. Dilution rates to 1:30 for sensitive surfaces.
FeltPen Graffiti Shadow Stain Remover & Concentrated Cleaner | Paint, Ink, Dye, Organic Stains
From: $39.00- Unique UV sensitive formulation draws inks and other stains out of surfaces.
- Can be used while BARE BRICK STONE & MASONRY REMOVER or SENSITIVE SURFACE REMOVER is still on the stain OR after dissolving as much of the graffiti as possible using these removers (choice of remover depends on type of substrate.)
- Excellent for removing leather dyes and inks that have shown resistance to removers, ‘burnt into’ / stained paintwork or coated surfaces, or wrapped into porous surfaces creating a stain.
- When diluted, creates a highly active cleaner for use cleaning smoke films, greasy marks, carbon deposits, food spills, mold, fungi, and other soilage.
- Biodegradable
Gloss Sealer For Masonry and Wood | Premium Grade Acrylic
From: $45.00- Premium Grade Sealer and Water Repellent Offering a Nice Glossy Look
- For Concrete, Masonry, Brick, Wood
- Use on Painted or Unpainted Surfaces
- Adds Stain Resistance for Easier Cleanup
- Clear Finish Will Not Yellow
- To 5 Year Satisfaction Guarantee
- Eco-Friendly and Easy To Apply
Graffiti Safewipes | Quick, Easy Graffiti Removal | Smooth Surface | Pen, Crayon, Markers, Paint
From: $34.00- Versatile multi-use towelette for quick and easy removal of graffiti and other marks from painted and smooth surfaces
- Fast acting, non-damaging formula encapsulates and suspends graffiti and other marks so you can wipe away easily without smearing / smudging or re-depositing into coated surface
- Pleasant smelling and non toxic
- Safe and effective to use on most smooth surfaces
- BIODEGRADABLE liquid
- Cleans and disinfects (kills) staphylococcus, streptococcus, E. coli and salmonella
- Comes in convenient multi-pack containers of 20, 30, 70 wipes for easy transport
GroundWorx SF ESD Static Conductive Epoxy Floor Coating | Water Based | ANSI/ESD S20.20-2014
From: $960.00- Conductive 2 Part Water Based Thin Film Epoxy Floor Coating
- Conductive range 2.5 x 104 - 3.5 x 107 ohms
- System Resistance (w/ ESD Footware) < 3.5 x 107 (fully compliant) ANSI/ESD STM 97.1
- Warrantied ANSI S20.20 performance
- Meets ANSI/ESD S20.20-2014 (S97.1 and S97.2), DOD 4145.26M, HDBK263A
- Easy to Install
- For Concrete, Wood, VCT Tile Floors
- Use in Electronics Mfg, Assembly, ESD Protected Areas
- 6 Colors. Pewter Gray Color available for immediate shipment
GroundWorx SF ESD Static Dissipative Epoxy Floor Coating | Water Based | ANSI/ESD S20.20-2014
From: $960.00- Static Dissipative 2 Part Water Based Thin Film Epoxy Floor Coating
- Static Dissipative 10e6 to 10e9 ohms
- Warrantied ANSI S20.20 performance
- Meets ANSI/ESD S20.20-2014
- Easy to Install
- For Concrete, Wood, VCT Tile Floors
- 6 Colors.
- Static Dissipative version of Groundworx is special order 4-5 week lead time. Most projects use the Conductive Version of GroundWorx with immediate shipment of Pewter color
H20 HyperPRIME Epoxy Quick Cure Bonding Primer | Low Temp 45°F | 3 Hr Recoat
From: $40.00- Excellent Substrate Penetration with superior adhesion 450 psi
- Great for concrete, wood and metal surfaces
- Helps protect Against Coating Damage from Outgassing of Concrete
- Quick Cure With 3 Hour Recoat Time - great for 1 day floor coating systems
- Available in Clear plus 6 Colors
- Water Base, No Offensive odors
- Cold temperature application down to 45F
- Good chemical and Stain Resistance
- Easy Application
Heritage Graffiti Remover | For Sensitive Historic Important Buildings | Stonework Brickwork Masonry...
From: $39.00- Fast-acting penetrating formula encapsulates and dissolves spray can and other stains from behind as well as the front.
- Easily rinsed with a small pressure washer requiring very little rinsing water. Any resultant runoff is a readily biodegradable gray water soap which can be left to biodegrade. Recycled or further diluted for use in gardens etc.
- No shadows, no damage, no harsh scrubbing required.
- Pleasant smelling and nontoxic.
- Safe and effective to use on all types of natural stone (such as limestone, granite, and marble), stainless steel, trees, plastics, and playground equipment.
- May be used on painted surfaces as well as natural surfaces.
- Biodegradable
Hot
Mend-Con RTU Concrete Repair | Apply Wet Conditions & Underwater | Vertical No Sag | Quick Cure...
$470.00- Repair in Wet conditions - Apply Underwater
- Great for Pool Repairs
- High strength epoxy
- Bonds to fresh or hardened concrete
- No Sag No Drip Formula - perfect for Vertical, Overhead or Horizontal surfaces
- Quick Cure Dries to touch 15 minutes, paint in 1 hour and drive on it in 8 hours (temperature dependent)
- 2x as strong as most concrete - Compressive strength 8000 psi
- Easy To Apply – Convenient ready-to-use cartridge system
- Wide application temperature 40°F – 100°F
- Paintable surface
- Comes in Case of 12 Cartridges & Cartridge Gun
Micro-seal Silane Siloxane Water Repellent | Concrete Brick Block Stucco | Clear Non Film Forming | ...
From: $35.00- Best in Class Multi-Surface Moisture Protection
- Used on Construction Projects Worldwide
- ASTM Tested to Stop 98 mph Wind Driven Rain
- Clear Penetrating, No Change in Appearance
- 10 to 20 Year Labor / Material Warranty
- Water Base, Low VOC, Eco-Friendly
- Specified by Architects in 03300, 04220, 07190, 099123, 09960
Micro-Seal With Graffiti Control & Water Repellent For Porous Wall Surfaces
From: $125.00- Protect Unpainted Walls From BOTH Graffiti Attacks & Wind Driven Rain in ONE Product
- Save Time & Money Using Less Labor
- Flat Sheen for Little Change in Appearance
- Water Based, Low VOC, Eco-Friendly
- Up to 20 Year Warranty
- Specified by Architects in 07190 / 099623
Hot
PerfectCleaner Powder Concentrate | Clean Mastic, Epoxy, Concrete, VCT | Remove Grease, Oil, Wax, In...
From: $19.95- Effectively Cleans Surfaces Prior to application of wide variety of primers and other coatings
- Easy to use Powdered Concentrate
- Powerful, 100% water soluble solution fortified with natural citrus extracts
- Non-flammable, biodegradable and deodorizes as it cleans.
- Removes grease, oil, wax, and inks
- Works on metal, plastic, rubber, concrete, tile, wood, vinyl, formica, and many porous surfaces.
Hot
PerfectLeveler Repair | Concrete, Wood, Tile, Vinyl, VCT, Mastic, Asbestos | Fills, Levels, Smooths ...
$79.95- Quick, Easy to Use
- Easy application with trowel or putty knife
- Stronger than other patching cements
- Superior adhesion to most any surface
- Dries quickly
- No waste, comes as Powdered Mix allowing you to use only what you need
- Works Great for leveling/repairs after applying PerfectPrimer
Hot
PerfectPaint Floating Floor Prep | Seal-Prime-Paint One Step | Asbestos Tile, Mastic, Glue, Cement |...
$470.00- SEAL - PRIME - PAINT all in one step wide range of dangerous and difficult flooring materials: asbestos, lead, mastics, glue, cements without need for expensive removal
- Great bonding to smooth, non-porous surfaces found in commercial offices and homes including VCT, ceramic tile, vinyl, linoleum
- Safely encapsulate, rather than grind asbestos and lead prior to application of vinyl, tile, wood or other resilient flooring
- Reduce surface prep, expense and project completion time
- No need for scraping, grinding, solvents, soy gels, or removal of mastics
- Molecular adhesion ensures a strong bond to difficult non-porous surface
- Leaves a nice paint finish to your flooring project
- Water based Non-Toxic, no harmful VOCs
- Cleans up with water
Hot
PerfectPatch Repair | Concrete, Wood, Tile, Vinyl, VCT, Mastic, Asbestos | Fills, Levels, Smooths | ...
$39.95- Quick, Easy to Use
- Easy application with trowel or putty knife
- Stronger than other patching cements
- Superior adhesion to most any surface including concrete, wood, asbestos, mastic, tile, VCT,
- Dries quickly
- No waste, comes as Powdered Mix allowing you to use only what you need
- Works Great for repairs prior to applying PerfectPrimer and PerfectPrimer Floor Prep (Formerly PerfectPaint)
Hot
PerfectPrimer Sealer | Asbestos Tiles , Mastics, Glues, Cements | VCT, Ceramic Tile, Vinyl, Linoleum...
From: $240.00- SEAL and PRIME dangerous and difficult floor materials: asbestos, lead, mastics, glue, cements without need for expensive removal
- Great bonding primer for smooth, non-porous surfaces: VCT, ceramic tile, vinyl, linoleum
- Safely encapsulate, rather than grind asbestos and lead before applying paint, coatings, or resilient flooring
- Molecular adhesion ensures strong bond to difficult non-porous surfaces
- Reduce surface prep, expense, project completion time
- No need to remove soy strippers, or grinding debris
- Topcoat with most cements, epoxies, paints, anti-static coatings.
- Water based Non-Toxic, (0) VOC's
Plugger 10 Clear Masonry & Wood Acrylic Flat Sealer
From: $46.00- Flat Sheen Acrylic Water Sealer
- Clear, Will Not Yellow
- Protect With Little Change in Appearance
- 3 Year Warranty
- Water Base, Low VOC, Eco-Friendly
- Professional Grade
- Painted & Unpainted Concrete, Masonry, Wood
Plugger 25 Clear Masonry & Wood Acrylic Flat Sealer
From: $51.00- Flat Sheen Acrylic Water Sealer
- Clear, Will Not Yellow
- Protect With Little Change in Appearance
- 5 Year Warranty
- Water Base, Low VOC, Eco-Friendly
- Professional Grade
- Painted & Unpainted Concrete, Masonry, Wood
Salt Guard Road Salt & Ice Damage Premium Grade Concrete Protection
From: $56.00- Premium Grade Winter Salt and Ice Guard With Durable Icephobic Protection
- Winter Freeze Thaw and Ice Protection
- Clear Finish, Will Not Yellow
- Prevents Water & Ice Intrusion
- Eco-Friendly and Easy To Apply
- For All Porous Concrete, Masonry, Wood
Satin-Lok Wet Look High Gloss Acrylic Sealer
From: $61.00- High Gloss Wet Look Acrylic Water Sealer
- UV Resistant Will Not Yellow
- 5 Year Warranty
- Water Base, Low VOC, Eco-Friendly
- Professional Grade
- Painted & Unpainted Concrete, Masonry, Wood
Sensitive Smooth Surface Graffiti Remover | Wipe On then Wipe Off Easy Removal | Biodegradable
From: $39.00- Versatile multi use product for removing graffiti and other marks from paintwork.
- Fast acting penetrating formula encapsulates and suspends graffiti and other marks so you can wipe away easily without smearing / smudging or re-depositing into coated surface.
- Brush on / wipe off or spray and agitate with soft bristled brush or scourer.
- Pleasant smelling and non toxic.
- Safe and effective to use on most smooth surfaces.
- Biodegradable
- Cleans and disinfects (kills) staphylococcus, streptococcus, E. coli and salmonella
Tinted Waterproofer Transparent Stain and Water Repellent | Wood | Concrete
$48.00- Combines Superior Water Repellent Protection With 4 Transparent Stain Colors in 1 Easy Step
- Penetrating Silane Siloxane Formula With No Change in Surface Texture
- Protects Unpainted Concrete, Masonry and Wood
- Opaque Transparent Look
- Eco-Friendly
Transgel Paint & Graffiti Remover For Toughest Tags | Long Overnight Dwell Time | Low Temp 20F
From: $38.00- Fast acting and non-damaging
- Works on all building surfaces, from porous cinderblock to smooth paintwork, powdercoat and asphalt.
- Virtually odorless and non toxic.
- Thick Gel consistency stays wetter longer for maximum dwell time to soften thicker/older paint for subsequent rinsing
Universal Acrylic Metal Primer Pro-Cryl Paint
- Rust-inhibitive for steel, aluminum, galvanized steel
- Excellent corrosion-resistant primer
- Use with all acrylic, alkyd, urethane, epoxy topcoats – both solvent & water base
- Early moisture resistant
- Quick dry to recoat time for faster project turnaround
- Low temperature application down to 40F
- Use as bonding primer with Cool Coat Thermal Barrier Paint
- Available in red-oxide, gray and off-white
- Acceptable for use in USDA-inspected facilities
- Low VOC, water base, complies with SCAQMD & CARB
VandlClean Super Graffiti Remover Spray | Biodegradeable
From: $47.00- Effective All-Purpose Graffiti Remover
- Professional Grade
- Designed for use with Rainguard's VandlGuard line of Non-Sacrificial Anti-Graffiti Coatings
- Water Base, Low VOC, Eco-Friendly
- Biodegreadable
- Removes Graffiti From Wide Variety of Surfaces
- Pump Spray or Gallon Container
VandlGuard Finish Coat Premium Anti-Graffiti Coating
From: $150.00- Top Coat for VandlGuardFIVE and VandlGuardTEN Anti-Graffiti Coatings
- Allows Multiple Tag Removals
- Low Gloss for Little Change in Appearance
- UV Resistant Will Not Yellow
- Water Base, Low VOC, Eco-Friendly
- Specified by Architects in 099623
VandlGuard Non-Sacrificial Anti-Graffiti Coating | Low Gloss and Zero Gloss Options
From: $69.00- Non-Sacrificial Coating Allows Multiple Tag Removals
- Low Gloss & Zero Gloss options for Little or No Change in Appearance
- UV Resistant Will Not Yellow
- Unpainted / Painted Surfaces
- Water Base, Low VOC, Eco-Friendly
- Specified by Architects in 099623
- READY-TO-USE OR CONCENTRATE
VandlGuardFIVE Premium Non-Sacrificial Anti-Graffiti Coating 5 Yr
From: $107.00- Premium Non-Sacrificial Anti-Graffiti Coating Allows Multiple Tag Removals
- Low Gloss for Little Change in Appearance
- UV Resistant Will Not Yellow
- Unpainted / Painted Surfaces
- Water Base, Low VOC, Eco-Friendly
- 5 Year Labor & Material Warranty
- Specified by Architects in 099623
VandlGuardONE Premium Non-Sacrificial Anti-Graffiti Coating 1 Yr
From: $79.00- Premium Non-Sacrificial Anti-Graffiti Coating Allows Multiple Tag Removals
- Low Gloss for Little Change in Appearance
- UV Resistant Will Not Yellow
- Unpainted / Painted Surfaces
- Water Base, Low VOC, Eco-Friendly
- 1 Year Labor & Material Warranty
- Specified by Architects in 099623
VandlGuardTEN Premium Non-Sacrificial Anti-Graffiti Coating 10 Yr
From: $149.00- Premium Non-Sacrificial Anti-Graffiti Coating Allows Multiple Tag Removals
- Low Gloss for Little Change in Appearance
- UV Resistant Will Not Yellow
- Unpainted / Painted Surfaces
- Water Base, Low VOC, Eco-Friendly
- 10 Year Labor & Material Warranty
- Specified by Architects in 099623
VandlTop Sacrificial Anti-Graffiti Coating | No Chemical Removal
From: $60.00- Sacrificial Coating Allows Tag Removal Without Chemicals
- Matte Finish for Little Change in Appearance
- UV Resistant Will Not Yellow
- Unpainted / Painted Surfaces
- Water Base, Low VOC, Eco-Friendly
- 1 Year Material Warranty
- Specified by Architects in 099623
Vanish Graffiti & Paint Remover | Professional Grade Tag Removal | Biodegradable
From: $75.00- Highly effective biodegradable professional grade graffiti remover
- Stays wetter longer ensuring maximum dwell time, making it ideal for hot weather removals.
- Great for porous concrete, brick, stone, wood as well as removing graffiti from tough split faced block, cinder block and exposed aggregate surfaces
- Safe and effective for use on all types of natural stone (such as limestone, granite, and marble), stainless steel, trees, plastics, and playground equipment
- Virtually odorless and non toxic.
- Easily rinsed with a small pressure washer requiring very little rinsing water. (Any resultant run off is a readily biodegradable gray water soap which can be left to biodegrade, recycled or further diluted for use in gardens etc.)
- No shadows, no damage, no harsh scrubbing required.
- Safe and effective for removals on asphalt roads
WB0090 World’s Best Concrete, Paver & Hard Surface Detergent Cleaning Concentrate | Biode...
From: $60.00- Environmentally Friendly Phosphate free and BIODEGRADABLE.
- Removes the toughest grease and grime for professional quality results every time.
- Great for both home residential and commercial cleaning
- Works on concrete, tile, stone pavers, asphalt and other hard surfaces
- Ideal for floors, pavers, concrete machinery, factories, fast food drive-throughs, kitchens etc.
- Use to clean and degrease oil stained concrete floors such as garages prior to applying an epoxy coating system
- Economical Concentrate Formula. Dilution rates to 1:100
- Low foaming and free rinsing.
Wet Look High Gloss Acrylic Sealer For Wood & Masonry
From: $47.00- High Gloss "Wet Look" Acrylic Sealer
- Beautiful Appearance
- Interior and Exterior Surfaces
- For Concrete, Masonry, Brick, Stone, Wood
- Breathable Coating
- UV Resistant Will Not Yellow and Eco-Friendly
Wood Sealer & Water Repellent Premium Grade
From: $28.00- Wood Sealer is a Specialty Premium Grade Water Repellent and Sealer Designed for Wood
- Prevents Damage From Wind Driven Rain
- Tough, Durable, Stain Resistant Natural Finish
- To 5 Year Satisfaction Guarantee
- Eco-Friendly and Easy To Apply
Copyright 2023 by Exterior Performance Coatings LLC