Call us (630) 675-4509
Private Label products from specialty manufacturers, bringing the best value to the highest quality products
Show
Filter by
Filter by
Filter by
18″ Notched Floor Squeegee For Epoxy, Polyaspartic Floor | 4 Sizes | Case of 6
$199.00- 18" Speed Squeegee For Uniform Material Spreading
- 4 Notch Sizes: 1/8", 3/16", 1/4", 3/8"
- Comes in Economical Case of 6 Squeegees
- For Quicker and Easier Application of thicker mil (thickness) floor coating systems
- A floor coating standard, just grab it,use it, and toss it or clean it
- Steel handle socket
- Features steel frame with gray rubber solvent resistant blade
- Note: requires optional threaded handle
18″ Roller Cover For Epoxy, Urethane, Polyaspartic Coatings | 4 Sizes | Case of 24
From: $230.00- Shed resistant woven fabric for a virtually lint free finish with all paints, enamels, primers, urethanes, and epoxies.
- 2x Quicker application than using 9" roller covers
- Available in 1/8", 1/4", 3/8" and 1/2" thick nap roller covers
- Economical Case of 24 roller covers
- White Fabric Nap Cover
- Phenolic Core
24″ Notched Floor Squeegee For High Build Coating Systems | 1/2″ Notches | Case of 6
$199.00- 24" Speed Squeegee For Uniform Material Spreading
- Large 1/2" notches
- Comes in a Economical Case of 6 Squeegees
- For Quicker and Easier Application of thicker mil (thickness) floor coating systems
- A floor coating standard, just grab it,use it, and toss it or clean it
- Steel handle socket
- Features steel frame with gray rubber solvent resistant blade
- Note: requires optional threaded handle
9″ Roller Cover For Epoxy, Urethane, Polyaspartic Coatings | 4 Sizes | Case of 36
From: $180.00- Shed resistant woven fabric for a virtually lint free finish with all paints, enamels, primers, urethanes, and epoxies.
- Available in 1/8", 1/4", 3/8" and 1/2" thick nap roller covers
- Economical case of 36 Roller Covers
- White Fabric Nap Cover
- Phenolic Core
- Sold in Boxes of 10 Sleeves
9″ Roller Frame For Epoxy, Urethane, Polyaspartic Coatings | Case of 12
$70.00- 9" Economical Roller Frame
- Sturdy 5 Wire Cage Plastic Endcaps
- Chrome Plated 5/16" Shank
- Plastic Threaded Grip For Extension Pole Use
- Sturdy 5 wire cage and plastic endcaps
- Chrome plated 5/16 inch shank
- Plastic threaded grip for extension pole use
Aluminum Oxide Anti-Slip | BROWN | 3 Grit Sizes | Non-Skid Tough Durable Floor
From: $30.00- Adds very tough skid resistance & texture profile to a surface
- Epoxy, Polyaspartic, Urethane 2 part Pigmented floor coatings
- Does not change physical properties of the coating
- Well bonded into the body of the coating
- Long lasting for extended anti-slip performance
- Excellent in marine environments
- High hydrolitic stability
- 3 grit sizes in Brown Color from 24 grit to 60 grit
- Low Cost alternative to white colored aluminum oxide for same level of anti-slip performance
Aluminum Oxide High Wear Abrasion Resistant Additive | 220 Grit | 325 Grit for Urethane & Polya...
From: $31.00- Significantly improves abrasion resistance of floor coatings
- Helps create a tough, durable, abrasion resistant surface
- Simple and easy to add while mixing a coating
- Works with any urethane and thin film polyasprtic coating
- Works well with high performance 2 part floor coatings
- Does not change physical properties of the coating
- Well bonded into the body of the coating
- High hydrolitic stability
- White Color in options 220 grit and 325 grit
AM1016 Anti-Microbial Mildew Resistant Anti-Slip Epoxy Floor Coating – 3 Gal Kit
From: $210.00- Adds slip resistant finish to concrete floors
- Anti-Microbial prevents growth of micro-organisms
- Resists growth of surface mold, mildew, fungus and helps prevent odors that can result
- Good for surfaces subject to bare foot traffic
- Long 1 - 1.5 hour pot life
- Excellent adhesion
- Good chemical and abrasion resistance
- Wide selection clear plus 20 colors
- Water base
AM253 Novolac Anti-Microbial Epoxy Resists Mildew Growth Acid Solvent Chemicals
From: $398.00- Outstanding Spill & Splash Acid, Solvent, Chemical protection
- Anti-Microbial prevents growth of micro-organisms
- Resists growth of surface mold, mildew, fungus and helps prevent odors that can result
- Resists high concentration acids, some chlorinated solvents incl xylene, MEK
- High build for heavy duty traffic, chemical troughs, curbs
- Great for tanks, chemical spill areas
- Works on cement, masonry or brick
- Excellent adhesion 425 psi
- Quick back in-service, light foot traffic 10-18 hrs
- Low voc 47 g/L
AM257P Novolac Primer Anti-Microbial Epoxy Resists Mildew Growth Acid Solvent Chemicals
From: $325.52- Outstanding Spill & Splash Acid, Solvent, Chemical surface protection
- Anti-Microbial prevents growth of micro-organisms
- Resists growth of surface mold, mildew, fungus and helps prevent odors that can result
- Excellent primer companion to AM253 Novolac Anti-Microbial Epoxy
- Resists wide range of chemicals, solvents, acids
- Excellent adhesion 375 psi
- Long working time 1 to 3 hour POT life
- Selection of 3 color options
AM322HW Anti-Microbial Mildew Resistant Aliphatic High-Gloss Urethane Low Temp 45°F
From: $212.00- Tough, durable high performance urethane
- Anti-Microbial prevents growth of micro-organisms
- Resists growth of surface mold, mildew, fungus and helps prevent odors that can result
- Outstanding impact resistance 160 in lb (Gardner test)
- Excellent abrasion resistance 22 mg loss (Tabor test) Drops to 10 mg adding High Wear 325
- Excellent Chemical Resistance
- Aliphatic, UV Stable. will not yellow
- Easy to Use Long 2-4 Hour Pot Life
- Great for Indoor & Outdoor Projects
- Wide Variety of Clear and 18 Colors
- Solvent Based - Excellent adhesion
AM5015 Anti-Microbial Mildew Resistant Epoxy Primer WB
From: $94.00- Versatile epoxy primer for concrete, masonry, wood
- Anti-Microbial prevents growth of micro-organisms
- Resists growth of surface mold, mildew, fungus and helps prevent odors that can result
- Available 20 Colors To Match Topcoat
- Excellent primer for epoxy, polyaspartic, urethane
- Long 1 - 1.5 hour pot life
- Excellent adhesion
- Good chemical & abrasion resistance
- Water base
AM707HB Anti-Microbial Mildew Resistant Epoxy Floor Coating | 100% Solids
From: $162.00- High Build - 100% Solids Commercial Epoxy
- Anti-Microbial prevents growth of micro-organisms
- Resists growth of surface mold, mildew, fungus and helps prevent odors that can result
- Long POT Life (working time) 30-50 min
- Excellent Adhesion 450 psi
- Abrasion resistant Only 32 mg loss (Tabor test)
- Good Chemical Resistance
- High build 12-30 mils one coat (53 - 130 sq'/gal)
- Wide Variety of 20 Different Colors
Cove Trowel for Vertical Walls | 4″ and 6″ Height | Curved Blade | Easy Application | W...
$45.00- Curved designed for smooth, professional looking cove application
- Easy to use
- Wood Handle
- Tough steel construction
E100 Urethane Primer Finish Coat | Aluminum Galvanized & Rusty Steel | Dry Heat to 400 °F | App...
From: $55.00- Prime over Steel, metal, weathered galvanized steel, aluminum, fiberglass, polyurethane foam and previously painted surfaces
- Excellent “wetting out” properties and performance over sound rusty surfaces
- Outstanding abrasion & chemical resistance
- Very good weather resistance
- Excellent corrosion resistance, passed 1,200 hrs in salt cabinet
- Fast recoat 2-3 hours at 75°F & 50% R.H
- Cures down to 18°F and apply up to 140°F
- High heat resistance to 400°F dry
- Single component, easy to use
- Topcoat with most Epoxy, Urethane , Silicone
- Excellent barrier coat over lead based coatings
- USDA Approved
E1000 Epoxy Concrete Repair Kit | Holes to 1″ | Cracks | Spall | 3 Color
$136.00- Make quick, permanent repairs to concrete
- Patch cracks, spalled concrete and potholes
- Can be applied at ¼” – 1” thickness
- Outstanding adhesion to concrete
- Excellent chemical, abrasion and impact resistance
- USDA approved for food processing plants
- Easy to mix and apply
- 3 Colors Packaged in a 5 gallon pailConcret
E100V Vertical Wall High Build Epoxy Coating | Underwater Concrete | Pools | 13 Colors
From: $50.00- No sagging on vertical walls to 12 mils per coat
- Works well on underwater concrete decorative surfaces
- Great for pools and water features
- Good chemical and abrasion resistance
- Long 45 - 90 min pot life
- Outstanding adhesion 475 psi @elcometer
- Comes in 5 color options
- 100% solids, very low voc
E1015V Vertical Wall Epoxy Coating & Primer to 8 Mils No Sag | 11 Colors
From: $50.00- No sagging on vertical walls up to 8 mils per coat
- Good for priming or coating concrete, wood or masonry.
- Good chemical and abrasion resistance
- Long 1 - 1.5 hour pot life
- Excellent adhesion 425 psi @elcometer
- Wide selection of 11 color options
- Water base
E1016 Anti-Slip Epoxy Concrete Floor Coating – 3 Gal Kit
From: $196.00- Adds a slip resistant finish to concrete floors
- Good for use on surfaces subject to bare foot traffic
- Long 1 - 1.5 hour pot life
- Excellent adhesion
- Good chemical and abrasion resistance
- Wide selection of clear plus 20 color options
- Water base
E101C Moisture Cured Urethane Clear Heavy Traffic Floor Sealer | Dustproofer | Prevents Spalling
From: $85.00- Great heavy duty stain resistant floor sealer for warehouse and other heavy use areas
- Excellent adhesion and sealer for concrete, wood and masonry surfaces.
- Extremely hard, yet flexible film.
- Outstanding “wearing properties
- Highly resistant to abrasion and impact.
- Excellent stain resistance.
- Keeps concrete dusting down.
- Good chemical resistance.
- Easy to clean and maintain.
- Quick recoat as soon as 1-2 hours
- One component, easy to use - No mixing 1-2 hour POT Life.
E105M Epoxy Mortar Concrete Resurfacer & Patch Kit
From: $66.00- Economical Easy resurfacing old and damaged concrete floors
- Compressive Strength 8,400 psi ASTM D695
- Heat Deflection Temp 131.7F ASTM D648
- High Build Resurfacing 1/8" to 1/4"
- Patching up to 2" thick
- 100% solids epoxy
- Comes complete with epoxy & aggregate
- Selection of 5 color options
- Application temp range 55°F to 90°F
E110M Epoxy Mortar Concrete Premium Resurfacer & Patch Kit
From: $73.00- Easy resurfacing old and damaged concrete floors
- Premium Tough, Durable, Chemical Resistant Protection
- 10% greater coverage/unit vs E105M Epoxy Mortar
- Compressive Strength 11,150 psi ASTM D695
- Heat Deflection Temp 158.9F ASTM D648
- High Build Resurfacing 1/8" to 1"
- Spot Patching up to 2" - 3" thick
- Long 30-40 min POT Life
- 100% solids epoxy
- Comes complete with epoxy and aggregate
- Selection of 5 color options
- Application temp range 55°F to 90°F
E126CW Cold Weather Epoxy Mortar Concrete Resurfacer & Patch Kit 35°F to 80°F
From: $71.00- Great for Cold Weather & Cold Storage Facilities
- Application range 35°F to 80°F
- Easy resurfacing old and damaged concrete floors
- Premium Tough, Durable, Chemical Resistant Protection
- Compressive Strength 11,284 psi ASTM D695
- Heat Deflection Temp 149.9F ASTM D648
- High Build Resurfacing 1/8" to 1/4"
- Patching up to 2" thick
- 100% solids epoxy
- Comes complete with epoxy and aggregate
- Selection of 5 color option
E128AF Arctic Epoxy Mortar Concrete Patch Kit | Cold Condition -10°F to 40°F
From: $70.00- Tough, Durable Cold Winter Weather Concrete Patch & Repair
- Excellent Extreme Cold Condition Patching -10°F to 40°F
- Great For Freezer, Cold Storage and Outdoor Winter Repairs
- High Build Resurfacing 1/8" to 1/4"
- Patching up to 2" thick
- Excellent chemical resistance
- Excellent Abrasion and Impact Resistance
- Compressive Strength 11,000 psi ASTM D695
- Quick recoat 1-2 hrs & 2-4 hrs light foot traffic
- Selection of 3 color options
- Easy to Use 3 part kit Includes Silica Sand or Liquid Only
E130A Oil Contaminated Concrete & Asphalt Epoxy Mortar Patch Kit/Resurfacer
From: $66.00- Great for patching and repairing oil contaminated and damaged concrete
- Can be used to patch and repair asphalt surfaces
- Can be applied up to 1/8" one application
- Crack. holes and general surface repairs
- Excellent abrasion and impact resistance
- 100% solids
- Easy to Use 3 part kit Includes Silica Sand or Liquid Only
E139FL Flexible Epoxy Primer & Floor Coating | 60% Elongation | 100% Solids | Indoor & Out...
From: $65.00- Exceptionally flexible epoxy with 60% elongation
- High Build up to 50 mils thick per coat
- 100% Solids Commercial Epoxy
- Excellent Adhesion 450 psi
- Tough Abrasion resistant Only 6 mg loss (Tabor test) and 160 inch lbs Gardner variable impact test
- For use with broadcast systems and as flexible membrane primer
- Wide Variety of 15 Colors
E1409CL Moisture Vapor Barrier Epoxy Sealer Primer For Concrete ASTM F3010
From: $247.00- Reduce effects of moisture vapor transmission on concrete floors
- Control moisture vapor emission rates to 20 lb/24hr/1000 sq' (ASTM F1869)
- Used as Sealer/Primer to protect Polymeric coating systems, vinyl sheets, tile, cementitious overlays, terrazo, wood veneers, and carpet
- 100% solids with 0 voc
- Easy to apply with one coat most projects
- Meets ASTM F3010 for vapor permeance at the recommended thickness
E1500HN Novolac Epoxy | Superior Steel & Concrete Chemical Horizontal Protection | Secondary Co...
$340.00- Excellent resistance to acids, alkalis, salts, most industrial chemicals and many solvents
- For Use in tough corrosive chemical environments including 98% Sulfuric Acid, 37% HCL and 70% Sodium Hydroxide
- Great horizontal chemical protection for Secondary Containment for both steel and concrete surfaces
- Thin film self leveling to 40 mils DFT one coat
- Extremely tough with high wearing properties
- Excellent abrasion resistance and impact resistance
- Meets USDA requirements
E155CL Damp Condition Clear Epoxy Primer | Moisture Tolerant | Quick Cure | Low Temp 45° | Flexible
From: $60.00- May be Applied to Damp or Moist Concrete Surfaces
- Excellent as a tough, flexible and clear concrete primer and sealer
- When used as clear Concrete Sealer has very low permeability to keep water and chemicals out while reducing concrete dusting, spalling and deterioration
- Excellent Adhesion to Concrete
- Excellent Primer for use with high performance coating systems
- As Quick as 30 min Recoat Time for 100% Solids Epoxy Systems
- Significantly Reduces Chance of Concrete Outgassing Problems
- Easy concrete preparation with either acid etching or concrete diamond grinding
E15M Epoxy Mastic Steel Primer DTM & Concrete Coating | Chemical Resistant | Low Temp 25F
From: $95.00- High solids DTM (direct-to-metal) chemical resistant steel primer or finish coat to steel and concrete
- Self priming to steel including tight rust
- Apply Vertical Surfaces to 8 mils DFT Steel & Concrete
- Great primer for use with our E1500HN (horizontal) and E555VN (vertical) Novolac Chemical Resistant Epoxies
- USDA Approved
- Tight film, low permeability.
- Exceptional adhesion Exceeds 500 psi
- Excellent impact resistance 90 in lb
- Excellent abrasion resistance CS 17 Wheel, 1000 cycles, 1000 g Load 21 mg loss
- Excellent against rust “undercutting”
- Easy to apply brush, roll and spray
- Low temp cure version to 25°F
- Available 13 colors
E183HB Epoxy Floor Coating High Build | Quick Back In-Service | Abrasion & Chemical Resistant |...
From: $324.00- High Build - Impact & Chemical Resistant
- Quick back in-service light foot traffic 8-14 hrs
- Full chemical resistance only 3 days
- Excellent Adhesion 450 psi
- Abrasion resistant Only 23 mg loss (Tabor test)
- Excellent Chemical Resistance
- High build apply 10 to 20 mils one coat (80 - 160 sq'/gal)
- Wide Variety of 19 Different Colors
E1900 Polyaspartic Clear | 40-50 Min Work Time | High Solids | Apply 40°F – 100°F | Chemical A...
From: $260.00- Excellent Clear Top coat for decorative flake and quartz granule systems and solid color epoxy coatings.
- Fast set
- Resistant to hot tire pick up.
- Highly resistant to chemical, abrasion and impact
- Meets USDA requirements for incidental food contact
- High Gloss
- Extremely hard, yet flexible.
- Excellent weather resistance
- Outstanding “wearing” properties.
- Easy to clean.
- Non-chalking and non-yellowing
- Apply up to 12 mils DFT in one coat (110 sq'/gallon)
E322HW High-Gloss Aliphatic Urethane Abrasion & Chemical Resistant Low Temp 45°F
From: $60.00- Outstanding durability with impact resistance of 160 in lb (Gardner Impact test)
- Cold temperature application down to 45°F
- Excellent abrasion resistance Only 22 mg loss (Tabor Abrasion test) Reduced to 10 mg loss using our High Wear 325 additive
- Excellent Chemical Resistance
- Aliphatic, UV Stable and will not yellow
- Easy to Use with Long 2-4 Hour Pot Life
- Great for both Indoor and Outdoor Concrete Floor Projects
- Comes in wide Variety of Clear and 18 Different Colors
- Solvent Based - Excellent adhesion
E322SG Semi-Gloss Aliphatic Urethane Abrasion & Chemical Resistant Low Temp 45°F
From: $60.00- Outstanding durability with impact resistance of 160 in lb (Gardner Impact test)
- Cold temperature application down to 45°F
- Excellent abrasion resistance Only 24 mg loss (Tabor Abrasion test) Reduced to 12 mg loss using our High Wear 325 additive
- Excellent Chemical Resistance
- Aliphatic, UV Stable and will not yellow
- Easy to Use with Long 2-4 Hour Pot Life
- Great for both Indoor and Outdoor Concrete Floor Projects
- Comes in wide Variety of Clear and 18 Different Colors
- Solvent Based - Excellent adhesion
E343 Quick Fix Concrete Repair Epoxy Urethane Patch Kit | 10 Min Light Traffic | Low Temp 20°F
From: $57.00- Extremely Quick - Walk on it 10 minutes, Full Serivce 1 hour
- Tough Durable Repair as hard as concrete
- Good for use interior & exterior repairs
- Low viscosity Product for Outstanding Adhesion and Deep Penetration of Cracks
- Comes in both small and large patch kits including silica sand and liquid only options
- Use With Sand For Improved Performance and lower repair costs
- Low viscosity (30 cps) Can be Used Without Sand to Penetrate Very Small and Deep Cracks
- Great for cold weather application down 20°F or warm weather up to 90°F
E344QC Polyaspartic Quick Cure Concrete Floor Coating | 85% Solids
From: $73.00- Tough, durable topcoat for interior epoxy floor coatings
- Fast Curing for quick back in-service
- Excellent chemical and abrasion resistance
- UV Stable and will not yellow
- Beautiful high gloss appearance
- Designed for high traffic and industrial areas
- High solids 85%
- Available in clear & 13 colors (Colored Pigment Sold Separately)
E352P Hi-Gloss Polyester Polyurethane Floor Coating | Chemical Abrasion Resistant | Exterior Interio...
From: $205.00- Great Interior & Exterior Horizontal Concrete & Steel Protection
- Exceptional Exterior Durability
- Excellent weather resistance
- Non-chalking and non-yellowing with excellent gloss and color retention
- Extremely tough, yet flexible
- A tile-like finish.
- Easy to clean
- Excellent chemical and stain resistance
- Highly resistant to abrasion and impact
- Outstanding wearing properties
- Handles up to 250°F Dry Service
- Long 4 hour POT life @ 75ºF
- Available in clear and 11 colors
E356HG High Gloss Urethane Moisture Cured | Exceptional Abrasion & Chemical Resistance | UV Sta...
From: $70.00- Superior abrasion resistance Only 4.4 mg loss (Tabor Abrasion test)
- Outstanding Chemical Resistance
- Excellent durability with impact resistance of 100 in lb (Gardner Impact test)
- Aliphatic, UV Stable and will not yellow
- Easy to Use one part with Long 3-5 Hour Pot Life
- Great for both Indoor and Outdoor Concrete Floor Projects
- Solvent Based With Excellent adhesion
E370P Hi-Gloss Hi Build Polyurethane | Non-Yellowing | For Vertical Concrete and Steel | Interior &#...
From: $118.00- Great Interior & Exterior Vertical Concrete & Steel Protection
- Exceptional Exterior Durability
- High solids
- Tile-like finish.
- Easy to clean
- Good chemical and stain resistance
- Highly resistant to abrasion and impact.
- Excellent gloss and color retention to UV exposure
- Pass 2500 hrs - QUV Accelerated Weathering ASTM D4587
- Outstanding wearing properties.
- Non-chalking and non-yellowing
- High film build
- Handles up to 300°F Dry Service
- Long 4-6 hour POT life @ 75ºF
- Available in clear and 21 colors
E374 Clear Satin Polyurethane | Non-Yellowing | For Vertical Concrete and Steel | Walls
$125.00- Great Interior & Exterior Vertical Concrete & Steel Protection and as topcoat for light to medium duty foot traffic only applications
- Exceptional Exterior Durability
- High solids
- Tile-like finish.
- Easy to clean
- Good chemical and stain resistance
- Highly resistant to abrasion and impact.
- Excellent gloss and color retention to UV exposure
- Pass 2500 hrs - QUV Accelerated Weathering ASTM D4587
- Outstanding wearing properties.
- Non-chalking and non-yellowing
- High film build
- Handles up to 300°F Dry Service
- Long 4-6 hour POT life @ 75ºF
- Available in clear and 21 colors
E444X Polyaspartic High Gloss Concrete Floor Coating | 84% High Solids | Non-Yellowing | Low Odor
From: $65.00- Tough, durable topcoat for epoxy floor coatings
- Indoor/Outdoor Applications
- Can Apply Direct to Concrete
- High solids 84%
- Easy to Work With 1:1 Mix Ratio
- Can be applied up 12 mils thick one coat (133 sq'/gallon)
- Excellent chemical and abrasion resistance
- UV Stable and will not yellow
- Beautiful high gloss appearance
- Designed for high traffic and industrial areas
- Available in clear & 13 colors (Colored Pigment Sold Separately)
E449 Polyaspartic Fast Cure High Gloss Concrete Floor Coating | 95% High Solids
From: $73.00- Tough, durable topcoat for epoxy floor coatings
- High solids 95%
- Quick back in service 3-5 hours light foot traffic
- Can be applied up 12 mils thick one coat (125 sq'/gallon)
- Excellent chemical and abrasion resistance
- UV Stable and will not yellow
- Beautiful high gloss appearance
- Designed for high traffic and industrial areas
- Available in clear & 13 colors (Colored Pigment Sold Separately)
E450SF Polyaspartic Slow Cure High Gloss Concrete Floor Coating | 90% Solids (Formerly E449SF)
From: $80.00- Tough, durable topcoat for interior epoxy floor coatings
- High solids 90%
- Can be applied up 12 mils thick one coat (120 sq'/gallon)
- Long Working time 20-25 min
- Excellent chemical and abrasion resistance
- UV Stable and will not yellow
- Beautiful high gloss appearance
- Designed for high traffic and industrial areas
- Available in clear & 13 colors (Colored Pigment Sold Separately)
E5013 Fast Set Clear Epoxy Primer WB Concrete | Wood | Masonry
From: $60.00- Versatile product good on concrete, masonry, wood surfaces
- Quick 4-6 hour Recoat for same day projects
- Excellent as clear primer for epoxy, polyaspartic and urethane coating systems
- Helps prevent concrete outgassing problems when used as primer
- Long 2 hour pot life
- Excellent adhesion 425 psi
- Good chemical and abrasion resistance
- Water base
E5015 Epoxy Primer WB Coating | Concrete Wood Masonry | 20 Colors
From: $51.00- Versatile product good on concrete, masonry, wood surfaces
- Excellent as primer for epoxy, polyaspartic and urethane coating systems
- Helps prevent concrete outgassing problems when used as primer
- Available in Clear and 20 Colors To Match With Topcoat
- Long 1 - 1.5 hour pot life
- Excellent adhesion 425 psi
- Good chemical and abrasion resistance
- Water base
E5030CL Urethane Clear Sealer / Topcoat WB
From: $55.00- Attractive, clear aliphatic non yellowing finish
- Versatile product good on concrete and masonry surfaces
- Recoat only 1-2 hours & light foot traffic 2-4 hours
- Extended 24 hour pot life
- Excellent abrasion resistance (Taber Abrasor test only 10 mg loss)
- High Gloss (>80 at 60 degrees)
- Flexible (120% Elongation at break)
- Water based
E505V Vertical Wall Epoxy Concrete Block Filler to 20 Mils No Sag | 11 Colors
From: $117.00- No sagging on vertical concrete and cement block walls up to 20 mils per coat
- Great epoxy block filler
- Good chemical and abrasion resistance
- Long 45 - 90 min pot life
- Excellent adhesion 420 psi @elcometer
- Wide selection of 11 color options
- 100% solids, very low voc
E517M Flake Filled Epoxy Mastic Steel & Concrete Coating | Chemical Containment | Low Temp Cure...
From: $125.00- Self Priming on steel
- Excellent primary containment coating for internal tank linings (when part of specified system)
- Excellent secondary containment coating
- Performs well over epoxy mortars and properly primed concrete surfaces
- Can be applied on damp surfaces
- Excellent chemical resistance to acids, caustics, solvents
- Outstanding impact and abrasion resistance.
- Exceptional adhesion Exceeds 700 psi
- Excellent flexibility pass 7/8" mandrel 180º Bend
- Apply Vertical Surfaces to 15 mils one coat
- Meets USDA requirements.
- Low temp cure version to 25°F
- Low VOC 72 grams/Liter
E5520 Low Gloss Urethane Water Base Abrasion & Chemical Resistant
From: $64.00- Outstanding durability with impact resistance of 160 in lb (Gardner Impact test)
- Excellent abrasion resistance Only 23 mg loss (Tabor Abrasion test) Reduced to as low as 10 mg loss using our High Wear 325 additive
- Excellent Chemical Resistance
- Aliphatic, UV Stable and will not yellow
- Great for Indoor Concrete Floor Projects
- Very Low voc 35 g/L, water based formula
E5521 High Gloss Urethane Water Base | Abrasion & Chemical Resistant | Low Odor | Vapor Permeab...
From: $50.00- Outstanding durability with impact resistance of 120 in lb (Gardner Impact test)
- Excellent abrasion resistance Only 21 mg loss (Tabor Abrasion test) Reduced to as low as 10 mg loss using our High Wear 325 additive
- Excellent Chemical Resistance
- Aliphatic, UV Stable and will not yellow
- Great for Indoor Concrete Floor Projects
- Low odor, water based formula
- Vapor Permeable Topcoat
E555VN Novolac Epoxy | Superior Steel & Concrete Chemical Vertical Protection | Tank Linings
$142.00- Excellent resistance to acids, alkalis, salts, most industrial chemicals and many solvents
- For Use in tough corrosive chemical environments including 98% Sulfuric Acid, 37% HCL and 70% Sodium Hydroxide
- Vertical application to 10 mils DFT.
- Great for Secondary Containment for both steel and concrete surfaces
- Use as Primary Containment and Tank Linings when used as part of specified system
- Excellent abrasion resistance with ceramic filler
- Excellent in battery storage room areas.
- Meets USDA requirements
- May be applied in cold, damp conditions to 45°F with curing down to 35°F
E572500 Non-Slip Skidproofer High Performance Epoxy Coating
From: $131.00- Great protection for problem slippery or wet concrete areas
- Outstanding slip resistance with a very aggressive textured anti-slip profile
- Excellent chemical and abrasion resistance
- Designed for high traffic and industrial areas
- Good For Docks, Ramps, Walkways etc
- 100% solids, 2 component
E57936 Lithium Concrete Densifier | Deep Penetrating
From: $40.00- Increases durability by improving resistance to freeze thaw effects
- Improves abrasion resistance and durability.
- Improves weathering, densifies and reduces efflorescence of natural stone, precast stone and cement.
- Protects and fortifies concrete as it seals against moisture damage.
- Application will reduce dusting and increase concrete life
E57937 Lithium Concrete Densifier Extra Strength | Deep Penetrating
From: $49.00- Increases durability by improving resistance to freeze thaw effects
- Improves abrasion resistance and durability.
- Improves weathering, densifies and reduces efflorescence of natural stone, precast stone and cement.
- Protects and fortifies concrete as it seals against moisture damage.
- Application will reduce concrete dusting and increase concrete life
- Extra Strength formula for improved performance
- Comes in both ready-to-use and money saving concentrate options
E57940 Concrete Conditioner With Stain Guard
From: $60.00- Increases durability by improving resistance to freeze thaw effects
- Improves abrasion resistance and durability.
- Improves weathering, densifies and reduces efflorescence of natural stone, precast stone and cement.
- Protects and fortifies concrete as it seals against moisture damage.
- Application will reduce dusting and increase concrete life
E5820 Oil Stop Epoxy Concrete Primer / Coating For Oil Contamination Areas
From: $50.00- Great for coating over oil contaminated concrete
- Can use as a primer before applying decorative coating systems
- Good as stand alone black colored coating
- Excellent substrate penetration through oil contaminated surfaces
- Excellent adhesion where standard epoxies typically fail
- Long 1 - 2 hour pot life
- High solids, 2 component
E5829 Flexible Epoxy Urethane Interior Expansion and Control Joint Sealant
From: $160.00- Flexible interior joint filler - Elongation 50.4% at 70F (ASTM D-412)
- Good for both expansion and control joints
- Great for general industry applications
- Hybrid epoxy urethane 2 component formula
- 100% solids with 0 voc
- Long 30-40 minute working time
- Low odor
- Paintable surface
E5829V Vertical Interior Wall Expansion & Flexible Joint Sealant
From: $162.00- Flexible vertical interior joint filler - Elongation 67% at 70F (ASTM D-412)
- No sag formula for vertical interior wall and overhead applications
- Hybrid urethane epoxy 2 component formula
- 100% solids with 0 voc
- Low odor
- Paintable surface
E5830 Flexible Interior Expansion & Control Joint Sealant | Fast Set | Cartridge Applied
From: $55.00- Flexible interior joint filler and sealant- Elongation 100%
- Easy Dual Cartridge Applied System
- Quick setting with light foot traffic in as little as 1 hour
- Excellent abrasion resistance
- 100% solids with 0 voc
- Low odor
- Paintable surface
E591 Wet Surface Epoxy | Apply Underwater | Cures to 35°F | Concrete – Steel | Floors – ...
From: $120.00- May be applied on wet or under water surfaces
- Cold temperature application down to 35°F
- Self-priming on steel and on most concrete applications
- Long 40-50 POT Life at 75F
- Ideal for marginally prepared and painted surfaces
- Outstanding impact and abrasion
- High film build - Up to 20 mil DFT per coat on horizontal surfaces
- Vertical surfaces to 12 mils
- Excellent coating for manholes
- 100% solids and 0 g/L VOC's
- 3 Colors Available
E650 Non-Skid Epoxy Floor & Deck Low Temp 25°F | OSHA ADA Navy Spec Mil-PRF-24667B
From: $107.00- Heavy duty non-skid resistance for concrete & steel
- Available in regular cure and cold temp formula to 25°F
- Designed for wet areas
- Meets ADA and OSHA requirements for safe co-efficient of friction (COF) when properly applied
- Meets Navy Military Specification Mil-PRF-24667B for Non-Skid Deck Coatings
- Excellent adhesion, abrasion and impact resistance
- Resistant to grease, oil, salt water, alcohol, detergent, gasoline, hydraulic fluid
- Excellent coating for Diamond Plate
- Easy to apply, ready to use non-skid coating
- Comes in 4 colors
E669 Clear Acrylic Lacquer High Gloss Sealer | Concrete | Brick | Wood | Solvent Based | Outstanding...
From: $55.00- Non-yellowing, high gloss. properties.
- Excellent penetration and high “wetting out”
- Excellent adhesion to concrete.
- Great for Concrete, Masonry & Wood Surfaces
- Good UV resistance.
- Good water and salt chemical resistance.
- Good stain resistance.
- Prevents “dusting” by increasing strength of concrete
- Ideal as dustproofing sealer.
- Very fast dry time.
E671CL Epoxy Floor Coating | Clear | 100% Solids | For Metallic Pigment and Full Flake & Quartz...
From: $52.00- Clear epoxy great for use with metallic pigments and full flake or quartz broadcast systems
- High Build - 100% Solids Commercial Epoxy
- Good Adhesion 350 psi
- Good Chemical Resistance
- High build 12-30 mils one coat (53 - 130 sq'/gal)
E700HV Epoxy | Exceptionally Tough | Abrasion & Chemical Resistant | No Topcoat Required
From: $64.00- Saves Money - Eliminates Need for Urethane or Polyaspartic Topcoat
- Extremely Tough D-90 Shore Hardness
- Exceptional Abrasion resistance Only 19 mg loss (Tabor test)
- Excellent Adhesion 420 psi
- Good Chemical Resistance
- Great Looking Very High gloss (80-105 at 60 degrees @ glossmeter)
- 97% Solids Commercial Epoxy
- High build 15-30 mils one coat (53 - 106 sq'/gal)
- Wide Variety of 20 Colors
E707HB High Build 100% Solids Epoxy Floor Coating | 20 Colors
From: $55.00- High Build - 100% Solids Commercial Epoxy
- Long POT Life (working time) 30-50 min
- Excellent Adhesion 450 psi
- Abrasion resistant Only 32 mg loss (Tabor test)
- Good Chemical Resistance
- High build 12-30 mils one coat (53 - 130 sq'/gal)
- Wide Variety 20 Different Colors
E707LVP High Solids Epoxy Primer & Base Coat | Helps Prevent Outgassing | 20 Colors
From: $54.00- High Solids Commercial Grade Epoxy Primer
- Helps reduce problems from concrete outgassing (air bubbles)
- Long POT Life (working time) 35-55 min
- Excellent Adhesion 430 psi
- Good Chemical Resistance
- Wide Variety 20 Different Colors
E811FP Acrylic Self Plasticizing Roof Coating | Monolithic Flexible Membrane
From: $240.00- Exceptionally tough, flexible 1 part acrylic roof coating
- Excellent adhesion for Concrete, Wood and Metal
- Tough surface, holds up to normal foot traffic
- Excellent weathering pass ASTM G93 for 9,000 hrs
- Excellent UV stability
- Resists growth of mildew
- Excellent flexibility 415% Elongation
- Resists cracking, splitting with building movement
- Available in 6 colors
- Underwriters Laboratories (UL) Tested & Certified
E812 Acrylic Self Plasticizing Roof Coating | Monolithic Flexible Membrane
From: $225.00- Tough, flexible budget friendly 1 part acrylic roof coating
- Good adhesion for Concrete, Wood and Metal
- Tough surface, holds up to normal foot traffic
- Excellent weathering pass ASTM G93 for 9,000 hrs
- Excellent UV stability
- Resists growth of mildew
- Good flexibility >200% Elongation
- Resists cracking, splitting with building movement
- Available in 6 colors
E814CP Co-Polymer Flat Roof Coating | 11 Color | Flexible | Waterproof
From: $71.00- Exceptionally tough, flexible 1 part SEBS Based waterproof coating
- Great for both Flat & Sloped Roofs
- Excellent adhesion EPDM, APP, TPO, Hypalon, BUR, Fiberglass, PVC, Polyurethane Foam, Concrete, Wood, Metal
- Excellent waterproof with E96 Vapor Transmission Class I 0.025 perms and Water Absorption 0.04%
- Excellent weathering
- Excellent UV stability
- Good resistance to dirt pickup
- Excellent low temp flexibility 500%+ Elongation
- Resists mildew and fungi growth
- Good resistance to Alkalis and acids
- Available in 11 Colors
- Underwriters Laboratories (UL) Tested & Certified
- Class A Fire Rated
E814R Co-Polymer Liquid Rubber Roof Walkway Coating | Slip Resistant
From: $76.00- Exceptionally tough, durable one part waterproof roof walkway
- Offers excellent anti-slip walking surface
- Excellent adhesion EPDM, APP, TPO, Hypalon, Concrete, Wood, Metal
- Available in 12 colors
- Excellent waterproof with E96 Vapor Transmission Class I 0.025 perms and Water Absorption 0.04%
- Excellent weathering
- Excellent UV stability
- Good resistance to dirt pickup
- Excellent low temp flexibility with 500%+ Elongation
- Resists mildew and fungi growth
- Good resistance to Alkalis and acids
E814RCP Co-Polymer White Flat Roof Coating | Reflect Solar Heat | Flexible | Waterproof
From: $69.00- Exceptionally Tough, Heat Reflective, 1 Part SEBS Based Waterproof Coating
- Great for Flat & Sloped roofs
- Excellent adhesion to EPDM, APP, TPO, Hypalon, BUR, Fiberglass, PVC, Polyurethane Foam, Concrete, Wood, Metal surfaces
- Reflective white color reduces energy costs with Solar Reflectance 82.5% and SRI 102 (solar reflective index)
- Excellent waterproof E96 Vapor Transmission Class I 0.025 perms & Water Absorption 0.04%
- Excellent weathering
- Excellent UV stability
- Good resistance to dirt pickup
- Excellent low temp flexibility 500%+ Elongation
- Resists mildew and fungi growth
- Good resistance to Alkalis and acids
- Underwriters Laboratories (UL) Tested & Certified
- Class A Fire Rated
E903M Urethane Cement High Build Mortar | Wet Heat to 200F | Hot Oil & Water Wash | Resist Fung...
From: $200.00- Excellent heat and thermal shock resistance to 200F
- Very good chemical resistance to organic and inorganic acids and solvents
- Resistant to Fungi Growth: Passes rating of 1 @ ASTM G-21
- Seamless hygienic finish with no grout lines
- High build repairs to 1"
- Excellent bonding characteristics
- Low odor, fast installation and fast cure.
- Low temp application down to 45F
- Available 3 colors gray, tan and tile red
E903SL Urethane Slurry | High Wet Heat 200F | Hot Oil & Water Wash | Moisture & Fungi Resi...
From: $100.00- Excellent heat and thermal shock resistance to 200F wet heat
- Very good chemical resistance to organic and inorganic acids and solvents
- Excellent Moisture vapor transmission to 12 pounds per 1,000 sq. ft. over a 24 hour period as per ASTM E1907
- Resistant to Fungi Growth: Passes rating of 1 @ ASTM G-21
- Good anti-skid surface
- Excellent bonding characteristics
- Great protection for food and beverage industry, food processing plants, dairy farms, industrial kitchens and wine cellars.
- Low temp application down to 45F
- Available 3 colors gray, tan and tile red and 2 package sizes
- E903SL Urethane Slurry is the high performance basecoat to the E903TC Urethane Top Coat high heat System
E903TC Urethane Topcoat | High Wet Heat 200F | Hot Oil & Water Wash | Moisture & Fungi Res...
From: $100.00- Excellent heat and thermal shock resistance to 200F wet heat
- Very good chemical resistance to organic and inorganic acids and solvents
- Excellent Moisture vapor transmission to 12 pounds per 1,000 sq. ft. over a 24 hour period as per ASTM E1907
- Resistant to Fungi Growth: Passes rating of 1 @ ASTM G-21
- Good anti-slip surface
- Excellent bonding characteristics
- Great protection for food and beverage industry, food processing plants, dairy farms, industrial kitchens and wine cellars.
- Low temp application down to 45F
- Available 3 colors gray, tan and tile red
- E903TC Urethane is the high performance topcoat to the E903SL Urethane high heat Slurry System
E903UCB Cove Base Urethane Mortar | HIgh Heat 250F | Anti-Fungal
From: $87.00- Easy construction of vertical cove bases
- Seamless hygienic finish with no grout lines
- Resistant fo fungi growth
- Low odor, fast installation, fast cure
- Thermal shock to 250F & chemical resistance
- 3 color options
E915HD Heavy Duty Cleaner Degreaser Concentrate | 100% Biodegradable
From: $37.00- Heavy duty cleaner formulated for versatility and dependability.
- Rapidly removes dirt, grease and grime from wide variety surfaces
- Compatible with most industrial floor coatings incl Epoxies, Polyaspartics, Urethanes
- Dissolves and removes food grease and many industrial oils and greases
- Use as general-purpose cleaner, floor cleaner, wax and floor finish stripper, engine degreaser and many other cleaning problems.
- 100% Biodegradable
- No caustics, butyl ethers, or chlorinated and petroleum based solvents
- Use by hand or through steam or pressure cleaning equipment, automatic floor scrubbers, etc
- Economical Concentrate Formula. Dilution rates to 1:50 for sensitive surfaces
E916MF Multi-Functional Heavy Duty Cleaner Concentrate | Floors Walls Equipment
From: $28.00- Rapidly removes dirt, grease and grime from wide variety surfaces
- Dissolves and removes food grease and many industrial oils and greases
- Use as general-purpose cleaner, floor cleaner, wax and floor finish stripper, engine degreaser and many other cleaning problems.
- Use by hand or through steam or pressure cleaning equipment, automatic floor scrubbers, etc
- Economical Concentrate Formula. Dilution rates to 1:30 for sensitive surfaces.
Flat Floor Squeegee (case of 6) For Epoxy and Polyaspartic Coatings | 2 Sizes
From: $160.00- Your choice of 18" and 24" Sizes
- Comes in economical case quantity 6
- For Quicker and Easier Application of thinner mil (thickness) floor coating systems
- Steel back and steel handle socket
- Stiff Grey rubber blade
- Makes installing floors a breeze
- This Squeegee is the best for installing medium and heavy bodied resins
Garnet Anti-Slip Additive| BROWN | 36 Grit | Non-Skid Tough Durable Floor
From: $35.00- Adds very tough skid resistance & texture profile to a surface
- Works well with high performance 2 part pigmented floor coatings
- Non-reactant – will not interfere with your coatings
- Well bonded into the body of the coating
- Long lasting for extended anti-slip performance
- Cost–effective – highly effective
- Non-toxic – inert and natural, crystalline silica levels are less than 1%
- Comes in the most popular 36 grit size
- Low Cost alternative to white colored aluminum oxide for only slightly less level of anti-slip performance
Gauge Rake 24 in “Sled Type” For Smooth Application Cementitious, Slurry, Thick Coatings
$50.00- Apply high build urethane and epoxy slurry, mortar and coatings and cementitious materials at a precise, predetermined uniform depth
- T-Skates adjust from 0 to 2 inches
- Thin sleds make a minimal disturbance in application
- Tool is lightweight, yet sturdy
- 24" wide
Looped Nap Roller Covers 9″ & 18″ | Case of 12 | For Heavy Aggregate Epoxy and Uret...
From: $85.00- Great for applying coarse aggregate epoxy coatings and urethane slurries
- Use with all texture paints
- Durable, plastic looped material applies paint and creates decorative effects in one step
- Looped vinyl material
- Phenolic core resists water, solvents, and cracking
- Available in 9" and 18" wide sizes
- Comes in Case of 12 Roller Covers
NE253 Novolac Colored Epoxy Acid Solvent Chemical Resistant High Build
From: $55.00- Outstanding Spill & Splash Acid, Solvent, Chemical protection
- Resistant to high concentration acids, some chlorinated solvents incl xylene, MEK
- Resists wide range of chemicals, solvents and acids
- High build for heavy duty traffic projects, chemical troughs and curbs
- Great for tanks and chemical spill areas for cement, masonry or brick
- Excellent adhesion 425 psi
- Quick back in-service, light foot traffic 10-18 hrs
- Selection of 3 color options
- Low voc 47 g/L
NE253SL Novolac Epoxy Colored Slurry Acid Chemical Resistant Floor Coating
From: $55.00- Outstanding Spill & Splash Acid, Solvent, Chemical protection
- Apply to 1/16" thick to resurface traffic, chemical spill areas
- Resists wide range of chemicals, solvents and acids
- Resistant to high concentrations of acids and even some chlorinated solvents incl xylene, MEK
- Excellent adhesion 425 psi
- Quick back in-service with light foot traffic 10-18 hours
- Selection of 3 color options
- Low voc 22 g/L
NE253V Novolac Vertical Wall Colored Epoxy Chemical Resistant Acid Solvent
From: $55.00- Outstanding Spill & Splash Acid, Solvent, Chemical protection
- Resistant to high concentration acids, some chlorinated solvents incl xylene, MEK
- Apply up to 10 mils on vertical walls
- Resists wide range of chemicals, solvents and acids
- Medium build for chemical troughs and curbs
- Great for tanks and chemical spill areas for cement, masonry or brick
- Excellent adhesion 425 psi
- Quick recoat 5-10 hrs
- Selection of 3 color options
- Low voc <40 g/L
NE255P Novolac Epoxy Primer/Sealer Flexible Crack Bridging Chemical Resistant
From: $55.00- Excellent crack bridging, flexible high build primer eliminates need to repair hairline cracks in chemical exposure areas
- Use for priming light to medium duty secondary containment
- Tough, durable coating for surfaces exposed to vehicle traffic
- Outstanding abrasion and impact resistance with only 5 mg loss Taber Abrasion test and 100 inch lbs Gardner Impact Test
- Excellent adhesion 450 psi
- 100% solids, zero voc 0 g/L
NE256 Novolac Clear Epoxy Acid Solvent Chemical Resistant Floor Coating
From: $55.00- Outstanding Spill and Splash Acid, Solvent, Chemical surface protection
- Exceptional resistance to wide range of chemicals, solvents and acids
- Medium to High build for chemical spill areas, troughs, curbs and tanks
- Use as clear color coating or base for chip/flake or aggregate systems
- Excellent adhesion 400 psi
- Low voc <31 g/L
NE256M Novolac Epoxy Mortar Acid Solvent Chemical Resistant Patch Kit/Resurfacer
From: $83.00- Outstanding Spill and Splash Acid, Solvent, Chemical surface protection
- Apply at 1/8" to 1/4" to resurface traffic and chemical spill areas
- Used in many chemical immersion projects, curbs, tanks and chemical troughs
- Resists wide range of chemicals, solvents and acids
- Excellent impact and abrasion resistance
- Selection of 4 color options
- Low voc <14 g/L
NE257P Novolac Epoxy Colored Primer Acid Solvent Chemical Resistant Floor Coating
From: $55.00
NE258P Novolac Epoxy Clear Primer Acid Solvent Chemical Resistant Floor Coating
From: $55.00- Excellent primer companion to our NE256 Novolac Clear Epoxy topcoat
- Helps reduce air release generation when applying higher solids novolac topcoats
- Outstanding Spill and Splash Acid, Solvent, Chemical surface protection
- Resists wide range of chemicals, solvents and acids
- Excellent adhesion 365 psi
- Long working time with 1 to 3 hour POT life
NE259G Novolac Epoxy Grout Coat Acid Solvent Chemical Resistant Floor Coating
From: $55.00- Outstanding Spill and Splash Acid, Solvent, Chemical surface protection
- Resists wide range of chemicals, solvents and acids
- Low build epoxy to seal surface of existing mortar overlay system
- Great for topcoating/sealing poxy mortar power trowled or hand trowled systems
- Excellent adhesion 425 psi
- Selection of 3 color options
- Low voc <47 g/L
NE3770 Novolac Chemical Resistant Epoxy | High Heat Exposure to 225˚F | Meets USDA Criterea | 100% S...
From: $315.00- High Heat Resistance to 225˚F+
- Strong Chemical Resistance to wide range of chemicals including 70% Sulfuric Acid 90 days+ and 50% Sodium Hydroxide 30 Days
- Great spill, splash and secondary containment chemical spill areas for cement, masonry or brick
- Meets USDA criteria
- High Strength
- 100% solids high build
- Low Odor
- Superior Adhesion
- Selection of clear and 4 color options
NE5928 Interior Expansion & Flexible Joint Novolac Chemical Sealant
From: $146.00- Flexible joint filler - Elongation 43.4% at 70F (ASTM D-412)
- Outstanding chemical and impact resistance
- Novolac epoxy urethane hybrid formula
- Excellent adhesion 420 psi
- 100% solids with 0 voc
- Low odor
- Paintable surface
NE5928V Vertical Interior Expansion & Flexible Joint Novolac Chemical Sealant
From: $145.00- Flexible vertical joint filler - Elongation 43.4% at 70F (ASTM D-412)
- No sag formula for vertical interior wall and overhead applications
- Outstanding chemical resistance
- Novolac epoxy and urethane hybrid formula
- Excellent impact resistance
- Good adhesion 380 psi
- 100% solids with 0 voc
- Low odor
- Paintable surface
NP-1 Cove Master Vertical Epoxy Mortar | 100% Solids | High Build | 5 Colors
From: $56.00- Easy construction of vertical cove bases
- 100% Solids Commercial Grade Epoxy
- High build formula
- 5 color options
- Comes as 3 part kit with aggregate or Liquid Only to add your own aggregate or NP1 can also be used as a primer.
Phenolic Core Roller Covers 9″ | Case of 12
$67.00- For spreading and leveling mastics, anti-slip floor coatings, and other heavy coatings
- Professional phenolic roller resists water and solvents
- Available in 9" size
- Comes in a case of 12 Roller Covers
Pigment For E344QC, E444X, E449 and E450SF Polyaspartic
From: $45.00- Pigment Designed to Color E344QC, E444X, E449 and E450SF Polyaspartic Coating
- Add a Beautiful Decorative Color to Your Polyaspartic Project
- 13 Different Colors to Choose From!
- Easy mixing using a Jiffy style mixer
Spike Shoes | Economical | Walk on Wet Epoxy, Polyaspartic, Urethane Floor Coatings
$34.99- A must for installing epoxy and polyaspartic floors
- Walk on wet surface without damage to floor coating
- 3/4" spikes are firmly attached to a flexible plastic sole with nylon straps (user needs to install the 11 spikes to the shoe platform prior to use)
- Use with Street Shoes or steel toe safety shoes
- Easy to adjust straps at toe and ankle
- Sold by the pair
- One size fits all
Spiked Roller Cover Metal (Porcupine) 9″ and 18″ Release Trapped Gas Bubbles
From: $195.00- Sturdy metal construction
- 13/16" Long Metal spikes
- Available in both 9" and 18" sizes (does not include handle)
- Helps remove gas bubbles that can form in floor coatings for a variety of reasons
Spiked Roller Cover Plastic (Porcupine) 9″ and 18″ Release Trapped Gas Bubbles
From: $115.00- Sturdy plastic construction
- Long 13/16" plastic spikes
- Available in both 9" and 18" sizes (does not include handle)
- Helps remove gas bubbles that can form in floor coatings for a variety of reasons
Static Mixer For E5830 Joint Filler Dual Cartridge Concrete Repair Kit
$30.00- Replacement Mixer for E5830 Joint Sealant 300ml x 300ml cartridge kit
- Allows multiple applications from single cartridge kit
- Mixes product in correct ratio and ready to apply
- Adjust Product Flow With Simple Cutting of Nozzle End
UW601 Underwater Concrete Crack Filler Epoxy Paste Repair
$350.00- Make Repairs Underwater or on Wet Surfaces
- Concrete and Masonry
- Both Horizontal & Vertical Repairs
- Good for Cracks up to 1/8" and Thin Build Repairs
- Apply 35F - 90F
- 100% solids with 0 voc
- Low odor
UW602 Underwater Pourable Concrete Crack Filler Epoxy Repair
$325.00- Make Repairs Underwater or on Wet Surfaces
- Concrete, Cement and Masonry
- Both Horizontal & Vertical Repairs
- Good for Larger Cracks and Wide Variety of Repairs
- Easy to Use Pourable Formula
- 100% solids with 0 voc
- Low odor
Vinyl Paint Chips 1/4″ BY THE LB (11 lb Min) FOR SMALL PROJECTS For Epoxy, Polyaspartic, Ureth...
$8.50- Add A Decorative Look To Any Epoxy, Polyurea, Polyaspartic, Urethane Flooring Project
- 10 Different Pre-Mixed Color Blends To Choose From
- Mix & Match Different Blends together as Part of Your Total Order to Create Your Own Custom Look
- Hide Sub-Surface Imperfections
- Optimal Flexibility And Strength
- Colorfast, UV Stable Pigments
- Low Sound / Noise Deadening Qualities
SOLD BY THE LB (MIN 11 LB ORDER)
Product Filter Search
Narrow search using one, two or all product filters at one time. Each selection narrows list further
Surface Applied To
Product Material
Product Color
Copyright 2024 by Exterior Performance Coatings LLC