Return to previous page

CS-0501 Color-lok Solid Color Concrete & Masonry Stain Pastel Tint Base

video

Product Information

$61.00 – $255.00

Penetrating Formula Does Not Chip Crack Peel
Flat Sheen Means No Lap Marks and Rich Uniform Solid Color Appearance
For Concrete, Masonry, Wood, Surfaces
Great Moisture Protection
Water Base, Low VOC, Eco-Friendly
5 Year Labor / Material Warranty
Specified by Architects in 07150 / 09900

SELECT TINT BASE TO MAKE CUSTOM COLORS

Size

Tint Base

Clear

SKU: N/A

Category: Stain

Tags: concrete stain, masonry stain, Tint Base, wood stain

Description

Color-Lok Solid Color Acrylic Siloxane Penetrating Stain Tint Base

Rainguard Color-Lok™ Acrylic Siloxane Solid Color Stain is a premium quality, modified acrylic penetrating stain fortified with siloxane for use on concrete, masonry and wood surfaces to provide excellent color and enhanced moisture protection. The addition of ultraviolet light absorbers, color stabilizers and penetrating agents dramatically improve adhesion and its resistance to the chipping, cracking and flaking of traditional exterior paints, ensuring long lasting performance.

The deep penetrating formula does not change surface texture, maintaining the natural look and texture of the surface. It is easy to apply and is used in a wide range of commercial and residential projects. Color-Lok™ Solid Color Stain adds water repellency to whatever surface it is applied to.

Comes in 3 mfg pre-mixed colors or create your own custom color using one of 3 available tint bases: pastel, accent & deep. Custom colors require mixing with standard water based colorant used to tint acrylic household paints. Colorant is available online or at any retail paint store where they can mix it for you. Available in both semi-transparent and solid color formulations. A wide range of tint base formulas are available for the Color-Lok Stain. Select your desired color using the Dulux Master Pallette by Akzo Nobel (formerly ICI Paints and Glidden). After selecting the color you are interested in you can use the attached charts to determine the tinting formula for the semi-transparent or solid color Color-lok. These formula’s may need some adjusting but should get you close to the color you want.

Where is Color-lok used?

Construction & Remodel Projects: Commercial building exterior walls, floors subject to light foot traffic
Homeowner projects: Exterior walls, decks, patios, porches, fences, outdoor furniture

Why Color-lok?

5 year labor and material warranty
Exclusive Micro-lok penetrating formulation
Does not change the look of the surface texture
Rich uniform look, dries to a dead flat finish to minimize flashing & lap marks
Superior moisture control performance
Breathable – does not trap moisture
Tint to any color – available in pastel, deep, accent tint base.:
Apply down to 40°F (4.4°C)
Quick 2 hour recoat time
Highly resistant to UV rays
Mix with Micro-seal for additional transparency to customize the semi-transparent look
For horizontal surfaces, best performance of Colorlok when top coated with Rainguard Satin-lok Acrlyic Sealer or Rainguard Clear-seal Urethane Sealer for added clear protection
100% Eco-friendly: low VOC

TECHNICAL INFORMATION
Color	Use one of 3 tint bases to make your own color using water based colorant compatible with acrylic paint
Sheen/Gloss Level	Flat Sheen
Dry To Re-Coat	2 hours
#Coats Recommended	1 – 2 coats
Back in-service time	24 hours to walk-on
Application method	Low pressure hand pump or airless sprayer, brush, roller
Where Can it be Used	All Interior\|Exterior architectural surfaces
Apply to New Concrete	10 days
Low Application Temperature	40F\|4.4C Surface & Air
Base	Water
VOC Content	<50 g/L
Use on Material	All masonry, concrete and wood surfaces
Warranty Available	5 year warranty available – download warranty application to register, see DOCUMENTS tab above

Certification/Test
Leed 4.2 (1) point credit available	Meets LEED and SQAMD low VOC requirements

COVERAGE RATE	SQUARE FEET/GALLON
Porous Surfaces	125 – 175
Dense Surfaces	150 – 200
*Textured surfaces	Decreases coverage rates

APPLICATION INSTRUCTIONS

CONDITIONS PRIOR TO APPLICATION
Temperature (surface\|air)	50F to 90F (10C to 35C) and at least 5F above dew point
Moisture of substrate	Less than 15%
Humidity	Less than 90%
Rain	No rain 48 hrs prior to, 48 hrs after application
Cure time for newly poured concrete	Apply 10 days after pour
Application method	Use low pressure hand pump or garden sprayer, t-bar, brush, lambs wool applicator

FOLLOW THESE SIMPLE APPLICATION STEPS
1. Rainguard COLOR-LOK is best and most economically applied using commercial airless spray equipment set at moderate pressures using a tip of .015 to .021. For appli-cation to horizontal surfaces, materials may be sprayed or rolled using a short nap roller. Back rolling may be necessary to even the applied finish.
Spray apply one coat of COLOR-LOK to surfaces at the suggested rates depending on color, surface type, and porosity. To avoid lap marks, maintain a continuous wet edge. Feath er edges at the end of each pass. Stop appli-cation only at control joints, corners, and edges. If a “heavier” painted look is needed, apply additional coats.

2. All surfaces to be coated should be structurally sound, clean, and dry. Kill mold, mildew, and fungus using com-mercially available cleaners or a 50/50 mix of bleach and water. Make sure all residue is rinsed prior to coating application.

3. Mix contents thoroughly prior to application. To prevent skinning, cover pail with a damp cloth.

PRECAUTIONS & LIMITATIONS
1. All surfaces to be coated should be clean of any dirt and grime, efflorescence, lime run, form oils and release agents, grease, mud, excess mortar, and mold and mildew, etc.
2. All cracks should be pointed or caulked. All voids, bee holes, masonry surface defects and openings such as conduits, pipes, drains, door frames, vents, air conditioner openings, electrical openings, control joints, or any dissimilar materials should be repaired using urethane or other approved patching.

STORAGE
Store materials in a well-protected area between 45° and 90°F. Avoid freezing temperatures, direct sunlight, and moisture. Keep away from heat sources.

Reviews

Rainguard Color-lok Semi-transparent Color Masonry & Wood Stain Pre-mixed colors

Color-lok Semi-Transparent Acylic Siloxane Stain

From: $66.00

Penetrating Formula Does Not Chip Crack Peel
Flat Sheen Means No Lap Marks and Rich Uniform Semi-Transparent Appearance
For Concrete, Masonry, Wood, Surfaces
Great Moisture Protection
Water Base, Low VOC, Eco-Friendly
5 Year Labor / Material Warranty
Available in 3 Pre-Mixed Colors
Specified by Architects in 07150 / 09900

Weight	N/A
Dimensions	N/A
Color	Natural Biege, Platinum Gray, Terra Cotta
CSI Spec	099113
Product Material	Acrylic/Siloxane
Finish	Flat
Surface Applied To	Block, Brick, Concrete, EIFS, Stucco, Wood
Warranty	5 Year Labor & Material Warranty
Manufacturer	Rainguard

CS-0801 Color Lok Semi-Transparent Stain Pastel tint Base

Color-lok Semi-Transparent Acrylic Siloxane Stain Tint Base

From: $60.00

Penetrating Formula Does Not Chip Crack Peel
Flat Sheen Means No Lap Marks and Rich Uniform Semi-Transparent Appearance
For Concrete, Masonry, Wood, Surfaces
Great Moisture Protection
Water Base, Low VOC, Eco-Friendly
5 Year Labor / Material Warranty
Specified by Architects in 07150 / 09900

SELECT TINT BASE TO MAKE CUSTOM COLORS

Weight	N/A
Dimensions	N/A
Tint Base	Accent, Deep, Pastel
Product Material	Acrylic/Siloxane
Finish	Flat
Surface Applied To	Block, Brick, Concrete, EIFS, Stucco, Wood
Warranty	5 Year Labor & Material Warranty
Manufacturer	Rainguard
Color	Tint Base

EXPERT Wood Stain & Sealer | Semi-Solid | Oil Based Deep Penetrating | Extreme Climate Apply -1...

From: $75.00

Provides rich color, while the natural grain still comes through
Deep Penetrating Oil Through Entire Wood For Exceptional Protection
Great Protection for medium to heavy foot traffic decks and weathered fences, siding & log homes, pergolas, gazebos
Prevents Drying Out which causes warping and cracking
Non-Film Forming Won't chip, crack or peel
Mildew & UV Resistant - Maintains Color
Water Shedding
Extreme Climate Can Apply -10°F to 110°F
Low VOC < 50 g/L
Rain-safe soon as 1 hour after applied to fences
Easy one coat application
Recoat Expert Stain & Seal without strip, sand or scrape
9 color options

Weight	N/A
Color	Auburn, Barnwood, Black, Cape Cod Gray, Chocolate, Eucalyptus, Palomino, Sable, Slate Gray
Size	1 Gallon, 5 Gallon

EXPERT Clear Wood Stain & Seal | Oil Based Deep Penetrating | Great For Hardwoods |Extreme Cli...

From: $65.00

Clear Protection While Keeping Original Wood Color
Deep Penetrating Oil Through Entire Wood For Exceptional Protection
Prevents Drying Out which causes warping and cracking
Non-Film Forming Won't chip, crack or peel
Mildew & UV Resistant - Maintains Color
Water Shedding
Extreme Climate Can Apply -10°F to 110°F
Ultra Low VOC < 7 g/L
Rain-safe soon as 1 hour after applied to fences
Easy one coat application
Recoat Clear Expert Stain & Seal without stripping, sanding or scraping

Weight	N/A
Size	1 Gallon, 5 Gallons
Color	Clear