Stucco
Showing 1–8 of 30 results
-
5500 Polyaspartic Polyurea Coating Roll Down Low Temp 30°F | 87% Solid
- Beautiful Clear Appearance
- Quick recoat time in as little as 1 – 1.5 hours
- Waterproofing Elastomeric Systems
- Good In Submerged Service Projects Like Fountains
- Works well on concrete, brick, steel, wood, fiberglass
-
5500HS 100% Solids Polyaspartic Polyurea Coating Roll Down | Low Temp 30°F | Flexible 120% Elongation | 1:2 Mix Ratio | 1 Coat Coverage
- Beautiful Clear HIGH GLOSS Appearance
- 100% Solids For Thick 1 Coat Coverage Full Flake, Quartz, Silica Sand Systems to 16 mils DFT (100 sq'/gallon)
- Quick 24 hour back in-service (at 75F)
- Waterproofing Elastomeric Systems
- Good In Submerged Service Projects Like Fountains
-
5500M Matte Finish Polyaspartic Polyurea Coating Roll Down | Low Temp 30°F | 89% Solids | Flexible 120% Elongation
- Beautiful Clear MATTE FINISH Appearance
- Quick recoat time in as little as 1 – 1.5 hours and 24 hour back in-service (at 75F)
- Waterproofing Elastomeric Systems
- Good In Submerged Service Projects Like Fountains
- Outstanding Chemical Resistant
-
830 Fast Set Polyurea Repair | Joint Sealant | Caulk | Adhesive | No Sag Walls | Concrete | Steel | Wood
- Vertical hold directly from the cartridge or static mixer
- Can be sprayed over with polyurea in a short time
- High chemical resistance, fuel resistant,
- Highly adhesive to many substrates
- Cold weather application down to -20F
-
Blok-lok Silane Siloxane Vertical Wall Water Repellent | Concrete Brick Block Stucco
- Labor and material water repellent warranty available for 5 years
- Easy to use Concentrates available that saves money, time and easier on the environment!
- ASTM tested for superior performance in stopping water and salt damage
- 100% Eco-friendly: low VOC
- Excellent mold and mildew inhibitor
-
Blok-Lok With Graffiti Control & Water Repellent For Porous Wall Surfaces
- Material warranty to 10 years for water repellency and 2 years for graffiti protection
- Clear, Flat Sheen, non-yellowing formula – Almost no change in look of the building
- Easy to apply with hand pump or garden sprayer
- Low cost application – single component, no mixing, no POT life issues, unlimited recoat window
- Retards growth of mildew and mold
-
Chalky Wall Sealer and Clear Acrylic Primer
- Flexible and breathable
- Helps prevent efflorescence
- Protects wood from swelling, shrinking, or grain raising
- Seals and binds chalked surfaces; improves adhesion of topcoat
- May be used on previously painted and properly prepared surfaces
-
CLEAR-SEAL 100% Urethane Super Premium Sealer | High Gloss
- Excellent Impact and wear resistant
- Resists hot tire pick-up for vehicular applications
- Performance Additive Available for Even Better Performance
- Excellent Chemical and Stain Resistance
- Resists UV rays - won't yellow