Call us (630) 675-4509
Show
Filter by
Filter by
Filter by
10R ESD Anti-Static Primer Concrete Moisture Sealer
From: $217.00- Clear Primer / Sealer Protects Against Moisture Damage Prior to Applying ESD Floor Coatings
- Vertical and Horizontal Applications
- Penetrating Formula
- 100% Vapor Permeable
- Water Based
- Use With 4700SS ESD Anti-Static Floor Paint
6007 Wet Condition Epoxy For Concrete & Steel | Low Temp 35°F
From: $593.00- Protect Problem Wet and Damp Areas
- Withstands to 20 PSI Hydralic Vapor Pressure
- Cold temperature down to 35°F
- Designed to Protect both Concrete and Steel
- Use as Primer With Topcoat or Floor Coating
- Offers Excelllent Moisture and Corrosive Protection with Outstanding Adhesion
- 100% Solids, no VOC, 2 Component
7001 Polyurethane Primer Concrete & Steel | Quick Cure | Exceptional Adhesion | Low 35F Temp
From: $80.00- Concrete & Steel Primer For Epoxy, Urethane, Polyaspartic, Polyurea Coatings
- Cross-links With Polyurea, EPDM Roofing and other Plastic Materials Difficult to Bond to
- Deep Penetrating Exceptional 1200 psi Adhesion
- Superior Corrosion, Abrasion and Water Resistance
- For Use in Submerged Service Applications
- Quick 1 hr recoat (based on temp & humidity)
- Semi-flexible & impact resistance
- Reduced concrete outgassing problems
- Moisture Cured easy to use 1 Component
- Wide application range 35°F - 125°F (1.7°C - 52°C)
AM257P Novolac Primer Anti-Microbial Epoxy Resists Mildew Growth Acid Solvent Chemicals
From: $325.52- Outstanding Spill & Splash Acid, Solvent, Chemical surface protection
- Anti-Microbial prevents growth of micro-organisms
- Resists growth of surface mold, mildew, fungus and helps prevent odors that can result
- Excellent primer companion to AM253 Novolac Anti-Microbial Epoxy
- Resists wide range of chemicals, solvents, acids
- Excellent adhesion 375 psi
- Long working time 1 to 3 hour POT life
- Selection of 3 color options
AM5015 Anti-Microbial Mildew Resistant Epoxy Primer WB
From: $94.00- Versatile epoxy primer for concrete, masonry, wood
- Anti-Microbial prevents growth of micro-organisms
- Resists growth of surface mold, mildew, fungus and helps prevent odors that can result
- Available 20 Colors To Match Topcoat
- Excellent primer for epoxy, polyaspartic, urethane
- Long 1 - 1.5 hour pot life
- Excellent adhesion
- Good chemical & abrasion resistance
- Water base
Chalky Wall Sealer and Clear Acrylic Primer
From: $21.00- Prevent Efflorescence, Seal Chalked Surfaces, Improve Adhesion of Topcoat
- For Concrete, Masonry, Wood
- Unpainted and Painted Surfaces
- Water Base, Low VOC, Eco-Friendly
- 3 Year Warranty
- Professional Grade
E-Green Polyurea Basecoat for Concrete Floors | Low Temp 0°F | 100% Solids | 300% Elongation
From: $378.00- Tough, durable plant based Polyurea Coating
- Extreme Flexibility (300% Elongation)
- Exceptional Adhesion >500 psi ASTM D4541
- Cold temperature application down to 0°F
- Can be used as high build basecoat up to 16 mils or 100 sq'/gallon
- Excellent chemical and abrasion resistance
- Designed for high traffic and industrial areas
- 100% Solids Performance
- Available in clear & 14 colors!
- Quick Cure 1 Day System
- Little to NO ODOR
E100 Urethane Primer Finish Coat | Aluminum Galvanized & Rusty Steel | Low Temp 18°F
From: $55.00- Prime over Steel, metal, weathered galvanized steel, aluminum, fiberglass, polyurethane foam and previously painted surfaces
- Excellent “wetting out” properties and performance over sound rusty surfaces
- Outstanding abrasion & chemical resistance
- Very good weather resistance
- Excellent corrosion resistance, passed 1,200 hrs in salt cabinet
- Fast recoat 1-2 hours at 75°F & 50% R.H
- Cures down to 18°F and apply up to 140°F
- High heat resistance to 400°F dry
- Single component, easy to use
- Topcoat with most Epoxy, Urethane Alkyds, Silicone, Enamels and Acrylic
- Excellent barrier coat over lead based coatings
- USDA Approved
E130A Oil Contaminated Concrete & Asphalt Epoxy Mortar Patch Kit/Resurfacer
From: $66.00- Great for patching and repairing oil contaminated and damaged concrete
- Can be used to patch and repair asphalt surfaces
- Can be applied up to 1/8" one application
- Crack. holes and general surface repairs
- Excellent abrasion and impact resistance
- 100% solids
- Easy to Use 3 part kit Includes Silica Sand or Liquid Only
E139FL Flexible Epoxy Primer & Floor Coating | 60% Elongation | 100% Solids | Indoor & Out...
From: $65.00- Exceptionally flexible epoxy with 60% elongation
- High Build up to 50 mils thick per coat
- 100% Solids Commercial Epoxy
- Excellent Adhesion 450 psi
- Tough Abrasion resistant Only 6 mg loss (Tabor test) and 160 inch lbs Gardner variable impact test
- For use with broadcast systems and as flexible membrane primer
- Wide Variety of 15 Colors
E1409CL Moisture Vapor Barrier Epoxy Sealer Primer For Concrete ASTM F3010
From: $247.00- Reduce effects of moisture vapor transmission on concrete floors
- Control moisture vapor emission rates to 20 lb/24hr/1000 sq' (ASTM F1869)
- Used as Sealer/Primer to protect Polymeric coating systems, vinyl sheets, tile, cementitious overlays, terrazo, wood veneers, and carpet
- 100% solids with 0 voc
- Easy to apply with one coat most projects
- Meets ASTM F3010 for vapor permeance at the recommended thickness
E15M Epoxy Mastic Steel Primer DTM & Concrete Coating | Chemical Resistant | Low Temp 25F
From: $108.00- High solids DTM (direct-to-metal) chemical resistant steel primer or finish coat to steel and concrete
- Self priming to steel including tight rust
- Apply Vertical Surfaces to 8 mils DFT Steel & Concrete
- Great primer for use with our E1500HN (horizontal) and E555VN (vertical) Novolac Chemical Resistant Epoxies
- USDA Approved
- Tight film, low permeability.
- Exceptional adhesion Exceeds 500 psi
- Excellent impact resistance 90 in lb
- Excellent abrasion resistance CS 17 Wheel, 1000 cycles, 1000 g Load 21 mg loss
- Excellent against rust “undercutting”
- Easy to apply brush, roll and spray
- Low temp cure version to 25°F
- Available 13 colors
E5013 Fast Set Clear Epoxy Primer WB Concrete | Wood | Masonry
From: $60.00- Versatile product good on concrete, masonry, wood surfaces
- Quick 4-6 hour Recoat for same day projects
- Excellent as clear primer for epoxy, polyaspartic and urethane coating systems
- Helps prevent concrete outgassing problems when used as primer
- Long 2 hour pot life
- Excellent adhesion 425 psi
- Good chemical and abrasion resistance
- Water base
E5015 Epoxy Primer WB Coating | Concrete Wood Masonry | 20 Colors
From: $51.00- Versatile product good on concrete, masonry, wood surfaces
- Excellent as primer for epoxy, polyaspartic and urethane coating systems
- Helps prevent concrete outgassing problems when used as primer
- Available in Clear and 20 Colors To Match With Topcoat
- Long 1 - 1.5 hour pot life
- Excellent adhesion 425 psi
- Good chemical and abrasion resistance
- Water base
E57936 Lithium Concrete Densifier | Deep Penetrating
From: $40.00- Increases durability by improving resistance to freeze thaw effects
- Improves abrasion resistance and durability.
- Improves weathering, densifies and reduces efflorescence of natural stone, precast stone and cement.
- Protects and fortifies concrete as it seals against moisture damage.
- Application will reduce dusting and increase concrete life
E57937 Lithium Concrete Densifier Extra Strength | Deep Penetrating
From: $49.00- Increases durability by improving resistance to freeze thaw effects
- Improves abrasion resistance and durability.
- Improves weathering, densifies and reduces efflorescence of natural stone, precast stone and cement.
- Protects and fortifies concrete as it seals against moisture damage.
- Application will reduce concrete dusting and increase concrete life
- Extra Strength formula for improved performance
- Comes in both ready-to-use and money saving concentrate options
E5820 Oil Stop Epoxy Concrete Primer / Coating For Oil Contamination Areas
From: $50.00- Great for coating over oil contaminated concrete
- Can use as a primer before applying decorative coating systems
- Good as stand alone black colored coating
- Excellent substrate penetration through oil contaminated surfaces
- Excellent adhesion where standard epoxies typically fail
- Long 1 - 2 hour pot life
- High solids, 2 component
E707LVP High Solids Epoxy Primer & Base Coat | Helps Prevent Outgassing | 20 Colors
From: $54.00- High Solids Commercial Grade Epoxy Primer
- Helps reduce problems from concrete outgassing (air bubbles)
- Long POT Life (working time) 35-55 min
- Excellent Adhesion 430 psi
- Good Chemical Resistance
- Wide Variety 20 Different Colors
Extreme Bond Primer For Interior Exterior Hard Slick Glossy Wall Surfaces
From: $62.99- Promotes adhesion and bonding on hard to paint surfaces
- Glazed Tile, Plastic, Glass, Fiberglass, Glossy Surfaces, Kitchen Cabinets
- Tightly bonds to slick and glossy surfaces
- Assures uniform appearance of topcoats
- One coat application
- Fast dry
- Use as bonding primer with Cool Coat Thermal Barrier Paint
- Topcoat With Hi-Performance coatings such as epoxy, polyaspartic, urethanes, lacquers and both oil and water based acrylics
H20 HyperPRIME Epoxy Quick Cure Bonding Primer | Low Temp 45°F | 1 Hr Recoat
$347.00- Excellent Substrate Penetration with superior adhesion 450 psi
- Great for concrete, wood and metal surfaces
- Helps protect Against Coating Damage from Outgassing of Concrete
- Quick Cure With 1 Hour Recoat Time - great for 1 day floor coating systems
- Available in Clear plus 6 Colors
- Water Base, No Offensive odors
- Cold temperature application down to 45F
- Good chemical and Stain Resistance
- Easy Application
- Available in Clear and 4 colors
Hot
IronBack Steel Primer | Convert, Encapsulate, Stop Rust | Topcoat With Water & Oil Based Paint
From: $130.00- Reduce or eliminate grinding and dangerous sandblasting
- Converts and encapsulates steel to prevent future rusting
- Compatible with water and oil-based paints
- Contains no VOCs. Non-toxic. Environmentally friendly
- Converts rusted surfaces to stable black metal.
- Ready-to use, non-toxic, and environmentally friendly.
- Contains no VOC’s. Fast clean-up.
- Steel sheds and other steel structures
- Interior and Exterior Rusty Steel Surfaces
MV2112 Moisture Vapor Barrier Primer Epoxy For Concrete Floors | ASTM F3010
From: $105.00- Reduce effects of moisture vapor transmission on concrete floors
- Control moisture vapor emission rates to 20 lb/24hr/1000 sq’ (ASTM F1869) or between 75% and 95% for ASTM F2170
- Superior moisture vapor control
- Class I Vapor Diffusion Retarder with perm rating of <.10
- Primer to protect Polymeric coating systems, vinyl sheets, tile, cementitious overlays, terrazo, wood veneers, and carpet
- 100% solids with 0 voc
- Meets ASTM F3010 for vapor permeance at the recommended thickness
NE255P Novolac Epoxy Primer/Sealer Flexible Crack Bridging Chemical Resistant
From: $55.00- Excellent crack bridging, flexible high build primer eliminates need to repair hairline cracks in chemical exposure areas
- Use for priming light to medium duty secondary containment
- Tough, durable coating for surfaces exposed to vehicle traffic
- Outstanding abrasion and impact resistance with only 5 mg loss Taber Abrasion test and 100 inch lbs Gardner Impact Test
- Excellent adhesion 450 psi
- 100% solids, zero voc 0 g/L
NE258P Novolac Epoxy Clear Primer Acid Solvent Chemical Resistant Floor Coating
From: $55.00- Excellent primer companion to our NE256 Novolac Clear Epoxy topcoat
- Helps reduce air release generation when applying higher solids novolac topcoats
- Outstanding Spill and Splash Acid, Solvent, Chemical surface protection
- Resists wide range of chemicals, solvents and acids
- Excellent adhesion 365 psi
- Long working time with 1 to 3 hour POT life
NP-1 Cove Master Vertical Epoxy Mortar | 100% Solids | High Build | 4 Colors
From: $56.00- Easy construction of vertical cove bases
- 100% Solids Commercial Grade Epoxy
- High build formula
- 5 color options
- Comes as 3 part kit with aggregate or Liquid Only to add your own aggregate or NP1 can also be used as a primer.
Hot
PerfectCleaner Powder Concentrate | Clean Mastic, Epoxy, Concrete, VCT | Remove Grease, Oil, Wax, In...
From: $19.95- Effectively Cleans Surfaces Prior to application of wide variety of primers and other coatings
- Easy to use Powdered Concentrate
- Powerful, 100% water soluble solution fortified with natural citrus extracts
- Non-flammable, biodegradable and deodorizes as it cleans.
- Removes grease, oil, wax, and inks
- Works on metal, plastic, rubber, concrete, tile, wood, vinyl, formica, and many porous surfaces.
Hot
PerfectPaint | Seal-Prime-Paint One Step | Asbestos Tile, Mastic, Glue, Cement | VCT, Ceramic Tile, ...
From: $470.00- SEAL - PRIME - PAINT all in one step wide range of dangerous and difficult flooring materials: asbestos, lead, mastics, glue, cements without need for expensive removal
- Great bonding to smooth, non-porous surfaces found in commercial offices and homes including VCT, ceramic tile, vinyl, linoleum
- Safely encapsulate, rather than grind asbestos and lead prior to application of vinyl, tile, wood or other resilient flooring
- Reduce surface prep, expense and project completion time
- No need for scraping, grinding, solvents, soy gels, or removal of mastics
- Molecular adhesion ensures a strong bond to difficult non-porous surface
- Leaves a nice paint finish to your flooring project
- Water based Non-Toxic, no harmful VOCs
- Cleans up with water
Hot
PerfectPrimer Sealer | Asbestos Tiles , Mastics, Glues, Cements | VCT, Ceramic Tile, Vinyl, Linoleum...
From: $240.00- SEAL and PRIME dangerous and difficult floor materials: asbestos, lead, mastics, glue, cements without need for expensive removal
- Great bonding primer for smooth, non-porous surfaces: VCT, ceramic tile, vinyl, linoleum
- Safely encapsulate, rather than grind asbestos and lead before applying paint, coatings, or resilient flooring
- Molecular adhesion ensures strong bond to difficult non-porous surfaces
- Reduce surface prep, expense, project completion time
- No need to remove soy strippers, or grinding debris
- Topcoat with most cements, epoxies, paints, anti-static coatings.
- Water based Non-Toxic, (0) VOC's
Universal Acrylic Metal Primer Pro-Cryl Paint
From: $69.99- Rust-inhibitive for steel, aluminum, galvanized steel
- Excellent corrosion-resistant primer
- Use with all acrylic, alkyd, urethane, epoxy topcoats – both solvent & water base
- Early moisture resistant
- Quick dry to recoat time for faster project turnaround
- Low temperature application down to 40F
- Use as bonding primer with Cool Coat Thermal Barrier Paint
- Available in red-oxide, gray and off-white
- Acceptable for use in USDA-inspected facilities
- Low VOC, water base, complies with SCAQMD & CARB
FREE SHIPPING
All US Ground orders in Lower 48 States by FedEx and USPS
WORLDWIDE DELIVERY
Shipping Ground, Air, Ocean. Call about our Special Export Programs
Copyright 2022 by Exterior Performance Coatings