Call us (630) 675-4509
Show
Filter by
Filter by
Filter by
Hot
6009 Epoxy Floor Coating Industrial & Commercial Low Temp 35°F | 100% Solids | Quick Cure
From: $115.00- Commercial, Industrial, Residential Concrete Floors
- Cold temperature down to 35°F
- Tough - Attractive Looking Epoxy
- Good Chemical, Abrasion, Impact Resistance
- Quick 4 to 7 hour set time
- Self Priming With No Primer Required
- 100% Solids, no VOC, 2 Component
- Clear or Selection of Colors
- Excellent Protection at Lower Cost
AM253 Novolac Anti-Microbial Epoxy Resists Mildew Growth Acid Solvent Chemicals
From: $398.00- Outstanding Spill & Splash Acid, Solvent, Chemical protection
- Anti-Microbial prevents growth of micro-organisms
- Resists growth of surface mold, mildew, fungus and helps prevent odors that can result
- Resists high concentration acids, some chlorinated solvents incl xylene, MEK
- High build for heavy duty traffic, chemical troughs, curbs
- Great for tanks, chemical spill areas
- Works on cement, masonry or brick
- Excellent adhesion 425 psi
- Quick back in-service, light foot traffic 10-18 hrs
- Low voc 47 g/L
AM257P Novolac Primer Anti-Microbial Epoxy Resists Mildew Growth Acid Solvent Chemicals
From: $325.52- Outstanding Spill & Splash Acid, Solvent, Chemical surface protection
- Anti-Microbial prevents growth of micro-organisms
- Resists growth of surface mold, mildew, fungus and helps prevent odors that can result
- Excellent primer companion to AM253 Novolac Anti-Microbial Epoxy
- Resists wide range of chemicals, solvents, acids
- Excellent adhesion 375 psi
- Long working time 1 to 3 hour POT life
- Selection of 3 color options
AM322HW Anti-Microbial Mildew Resistant Aliphatic High-Gloss Urethane Low Temp 45°F
From: $212.00- Tough, durable high performance urethane
- Anti-Microbial prevents growth of micro-organisms
- Resists growth of surface mold, mildew, fungus and helps prevent odors that can result
- Outstanding impact resistance 160 in lb (Gardner test)
- Excellent abrasion resistance 22 mg loss (Tabor test) Drops to 10 mg adding High Wear 325
- Excellent Chemical Resistance
- Aliphatic, UV Stable. will not yellow
- Easy to Use Long 2-4 Hour Pot Life
- Great for Indoor & Outdoor Projects
- Wide Variety of Clear and 18 Colors
- Solvent Based - Excellent adhesion
AM707HB Anti-Microbial Mildew Resistant Epoxy Floor Coating | 100% Solids
From: $162.00- High Build - 100% Solids Commercial Epoxy
- Anti-Microbial prevents growth of micro-organisms
- Resists growth of surface mold, mildew, fungus and helps prevent odors that can result
- Long POT Life (working time) 30-50 min
- Excellent Adhesion 450 psi
- Abrasion resistant Only 32 mg loss (Tabor test)
- Good Chemical Resistance
- High build 12-30 mils one coat (53 - 130 sq'/gal)
- Wide Variety of 20 Different Colors
Aspartic 100 High Build Polyaspartic for Concrete Floors | Low Temp 30°F | 100% Solids
From: $99.99- Tough, durable topcoat for interior epoxy floor coatings
- Very low to no odor great for sensitive odor indoor projects
- Can be used as high build topcoat up to 16 mils or 100 sq'/gallon
- Cold temperature application down to 30°F
- Excellent chemical and abrasion resistance
- UV Stable, Will Not Yellow
- Beautiful high gloss appearance
- Designed for high traffic and industrial areas
- High solids 100%
- Available clear & 14 colors (Pigment Sold Separate)
Aspartic 85 Polyaspartic Quick Cure Concrete Floor Coating | Low Temp 30°F
From: $79.50- Tough, durable topcoat for interior epoxy floor coatings
- Cold temperature application down to 30°F
- Fast Curing for quick 5-7 Hours Back in-Service Light Foot Traffic
- Excellent chemical and abrasion resistance
- UV Stable and will not yellow
- Beautiful high gloss appearance
- Designed for high traffic and industrial areas
- High solids 85%
- Available in clear & 14 colors (Colored Pigment Sold Separately)
Aspartic 85 Slow Set Polyaspartic Concrete Floor Coating | Low Temp 30°F | Low Odor Option
From: $99.99- Tough, durable topcoat for interior epoxy floor coatings
- Cold weather application down to 30°F
- Benefits of a Polyaspartic With Longer 45-60 minutes Working Times
- Excellent chemical and abrasion resistance
- UV Stable and will not yellow
- Beautiful high gloss appearance
- Designed for high traffic and industrial areas
- High solids 85%
- Available in clear & 14 colors (Colored Pigment Sold Separately)
- LOW ODOR version now available for indoor projects.
DT-454 Epoxy Quick Cure UV Concrete Floor Coating Low Temp 40F | 100% Solids
From: $70.00- Tough, Durable Epoxy Coating
- Quick cure 6-7 hour recoat time
- Outstanding Bonding
- UV Resistant
- Good chemical, impact and abrasion resistance
- Cold temperature application down to 40F
- High solids 100%
- Withstands up to 9 lbs. of hydrostatic pressure
- Available in clear & 14 colors! (Pigment sold separately)
E-Green Polyurea Basecoat for Concrete Floors | Low Temp 40°F | 100% Solids | 300% Elongation
From: $65.00- Tough, durable plant based Polyurea Coating
- Extreme Flexibility (300% Elongation)
- Exceptional Adhesion >500 psi ASTM D4541
- Cold temperature application down to 0°F
- Can be used as high build basecoat up to 16 mils or 100 sq'/gallon
- Excellent chemical and abrasion resistance
- Designed for high traffic and industrial areas
- 100% Solids Performance
- Available in clear & 14 colors!
- Quick Cure 1 Day System
- Little to NO ODOR
E1409CL Moisture Vapor Barrier Epoxy Sealer Primer For Concrete ASTM F3010
From: $247.00- Reduce effects of moisture vapor transmission on concrete floors
- Control moisture vapor emission rates to 20 lb/24hr/1000 sq' (ASTM F1869)
- Used as Sealer/Primer to protect Polymeric coating systems, vinyl sheets, tile, cementitious overlays, terrazo, wood veneers, and carpet
- 100% solids with 0 voc
- Easy to apply with one coat most projects
- Meets ASTM F3010 for vapor permeance at the recommended thickness
E183HB Epoxy Floor Coating High Build | Quick Back In-Service | Abrasion & Chemical Resistant |...
From: $324.00- High Build - Impact & Chemical Resistant
- Quick back in-service light foot traffic 8-14 hrs
- Full chemical resistance only 3 days
- Excellent Adhesion 450 psi
- Abrasion resistant Only 23 mg loss (Tabor test)
- Excellent Chemical Resistance
- High build apply 10 to 20 mils one coat (80 - 160 sq'/gal)
- Wide Variety of 19 Different Colors
E322HW High-Gloss Aliphatic Urethane Abrasion & Chemical Resistant Low Temp 45°F
From: $60.00- Outstanding durability with impact resistance of 160 in lb (Gardner Impact test)
- Cold temperature application down to 45°F
- Excellent abrasion resistance Only 22 mg loss (Tabor Abrasion test) Reduced to 10 mg loss using our High Wear 325 additive
- Excellent Chemical Resistance
- Aliphatic, UV Stable and will not yellow
- Easy to Use with Long 2-4 Hour Pot Life
- Great for both Indoor and Outdoor Concrete Floor Projects
- Comes in wide Variety of Clear and 18 Different Colors
- Solvent Based - Excellent adhesion
E322SG Semi-Gloss Aliphatic Urethane Abrasion & Chemical Resistant Low Temp 45°F
From: $60.00- Outstanding durability with impact resistance of 160 in lb (Gardner Impact test)
- Cold temperature application down to 45°F
- Excellent abrasion resistance Only 24 mg loss (Tabor Abrasion test) Reduced to 12 mg loss using our High Wear 325 additive
- Excellent Chemical Resistance
- Aliphatic, UV Stable and will not yellow
- Easy to Use with Long 2-4 Hour Pot Life
- Great for both Indoor and Outdoor Concrete Floor Projects
- Comes in wide Variety of Clear and 18 Different Colors
- Solvent Based - Excellent adhesion
E344QC Polyaspartic Quick Cure Concrete Floor Coating | 85% Solids
From: $73.00- Tough, durable topcoat for interior epoxy floor coatings
- Fast Curing for quick back in-service
- Excellent chemical and abrasion resistance
- UV Stable and will not yellow
- Beautiful high gloss appearance
- Designed for high traffic and industrial areas
- High solids 85%
- Available in clear & 13 colors (Colored Pigment Sold Separately)
E5520 Low Gloss Urethane Water Base Abrasion & Chemical Resistant
From: $64.00- Outstanding durability with impact resistance of 160 in lb (Gardner Impact test)
- Excellent abrasion resistance Only 23 mg loss (Tabor Abrasion test) Reduced to as low as 10 mg loss using our High Wear 325 additive
- Excellent Chemical Resistance
- Aliphatic, UV Stable and will not yellow
- Great for Indoor Concrete Floor Projects
- Very Low voc 35 g/L, water based formula
E5521 High Gloss Urethane Water Base | Abrasion & Chemical Resistant | Low Odor | Vapor Permeab...
From: $50.00- Outstanding durability with impact resistance of 120 in lb (Gardner Impact test)
- Excellent abrasion resistance Only 21 mg loss (Tabor Abrasion test) Reduced to as low as 10 mg loss using our High Wear 325 additive
- Excellent Chemical Resistance
- Aliphatic, UV Stable and will not yellow
- Great for Indoor Concrete Floor Projects
- Low odor, water based formula
- Vapor Permeable Topcoat
E700HV Epoxy | Exceptionally Tough | Abrasion & Chemical Resistant | No Topcoat Required
From: $64.00- Saves Money - Eliminates Need for Urethane or Polyaspartic Topcoat
- Extremely Tough D-90 Shore Hardness
- Exceptional Abrasion resistance Only 19 mg loss (Tabor test)
- Excellent Adhesion 420 psi
- Good Chemical Resistance
- Great Looking Very High gloss (80-105 at 60 degrees @ glossmeter)
- 97% Solids Commercial Epoxy
- High build 15-30 mils one coat (53 - 106 sq'/gal)
- Wide Variety of 20 Colors
E707HB High Build 100% Solids Epoxy Floor Coating | 20 Colors
From: $55.00- High Build - 100% Solids Commercial Epoxy
- Long POT Life (working time) 30-50 min
- Excellent Adhesion 450 psi
- Abrasion resistant Only 32 mg loss (Tabor test)
- Good Chemical Resistance
- High build 12-30 mils one coat (53 - 130 sq'/gal)
- Wide Variety 20 Different Colors
E707LVP High Solids Epoxy Primer & Base Coat | Helps Prevent Outgassing | 20 Colors
From: $54.00- High Solids Commercial Grade Epoxy Primer
- Helps reduce problems from concrete outgassing (air bubbles)
- Long POT Life (working time) 35-55 min
- Excellent Adhesion 430 psi
- Good Chemical Resistance
- Wide Variety 20 Different Colors
H20 zioTHANE Low Gloss Urethane Concrete Floor Sealer / Topcoat
From: $89.00- Tough, Durable Concrete Floor Sealer
- Topcoat for Epoxy Floor Coatings
- Excellent Chemical and Abrasion Resistance
- Exceptional Impact Resistance
- Aliphatic, UV Stable and Will Not Yellow
- Beautiful Clear, Low Gloss Appearance
- Designed for High Traffic and Industrial Areas
- Water Based, Low voc <10 g/L
H20 ZioTHANE Semi-Gloss Urethane Concrete Floor Sealer/Topcoat
From: $89.00- Tough, Durable Concrete Floor Sealer
- Topcoat for Epoxy Floor Coatings
- Excellent Chemical and Abrasion Resistance
- Exceptional Impact Resistance
- Aliphatic, UV Stable and Will Not Yellow
- Beautiful Clear, Semi Gloss Appearance
- Designed for High Traffic and Industrial Areas
- Water Based, Low voc <10 g/L
HyperBOND Epoxy | Wet Condition Moisture Tolerant | Concrete Floor Coating | Low Temp 40F | 100% Sol...
From: $60.00- Tough, Durable Epoxy Coating
- Outstanding Bonding
- Water Insensitive and Can Be Applied In Wet Conditions
- Withstands up to 9 lbs. of hydrostatic pressure
- Cold temperature application down to 40F
- Long 30-35 min working time
- Resistant to Blushing/Sweating
- Good chemical, impact and abrasion resistance
- High solids 100%
- Available in clear & 13 colors! (Pigment sold separately). In 3 gallon kits only, available pre-colored in 3 colors
HyperREZ UV Epoxy Concrete Floor Coating | 45 min Work time | 100% Solids | Ultra Clear Great for Me...
From: $70.00- Tough, durable epoxy floor and countertop coating
- Cold temperature application down to 40F
- High Build Applications up to 32 mils/coat (50 sq'/gal)
- Long Working Time
- Good chemical and abrasion resistance
- UV Resistant
- High gloss appearance
- Designed for high traffic and industrial areas
- High solids 100%
- Withstands up to 9 lbs. of hydrostatic pressure
- Available in clear & 14 colors (Colored Pigment Sold Separately)
MV2112 Moisture Vapor Barrier Primer Epoxy For Concrete Floors | ASTM F3010
From: $105.00- Reduce effects of moisture vapor transmission on concrete floors
- Control moisture vapor emission rates to 20 lb/24hr/1000 sq’ (ASTM F1869) or between 75% and 95% for ASTM F2170
- Superior moisture vapor control
- Class I Vapor Diffusion Retarder with perm rating of <.10
- Primer to protect Polymeric coating systems, vinyl sheets, tile, cementitious overlays, terrazo, wood veneers, and carpet
- 100% solids with 0 voc
- Meets ASTM F3010 for vapor permeance at the recommended thickness
NE253 Novolac Colored Epoxy Acid Solvent Chemical Resistant High Build
From: $55.00- Outstanding Spill & Splash Acid, Solvent, Chemical protection
- Resistant to high concentration acids, some chlorinated solvents incl xylene, MEK
- Resists wide range of chemicals, solvents and acids
- High build for heavy duty traffic projects, chemical troughs and curbs
- Great for tanks and chemical spill areas for cement, masonry or brick
- Excellent adhesion 425 psi
- Quick back in-service, light foot traffic 10-18 hrs
- Selection of 3 color options
- Low voc 47 g/L
NE253SL Novolac Epoxy Colored Slurry Acid Chemical Resistant Floor Coating
From: $55.00- Outstanding Spill & Splash Acid, Solvent, Chemical protection
- Apply to 1/16" thick to resurface traffic, chemical spill areas
- Resists wide range of chemicals, solvents and acids
- Resistant to high concentrations of acids and even some chlorinated solvents incl xylene, MEK
- Excellent adhesion 425 psi
- Quick back in-service with light foot traffic 10-18 hours
- Selection of 3 color options
- Low voc 22 g/L
NE253V Novolac Vertical Wall Colored Epoxy Chemical Resistant Acid Solvent
From: $55.00- Outstanding Spill & Splash Acid, Solvent, Chemical protection
- Resistant to high concentration acids, some chlorinated solvents incl xylene, MEK
- Apply up to 10 mils on vertical walls
- Resists wide range of chemicals, solvents and acids
- Medium build for chemical troughs and curbs
- Great for tanks and chemical spill areas for cement, masonry or brick
- Excellent adhesion 425 psi
- Quick recoat 5-10 hrs
- Selection of 3 color options
- Low voc <40 g/L
NE255P Novolac Epoxy Primer/Sealer Flexible Crack Bridging Chemical Resistant
From: $55.00- Excellent crack bridging, flexible high build primer eliminates need to repair hairline cracks in chemical exposure areas
- Use for priming light to medium duty secondary containment
- Tough, durable coating for surfaces exposed to vehicle traffic
- Outstanding abrasion and impact resistance with only 5 mg loss Taber Abrasion test and 100 inch lbs Gardner Impact Test
- Excellent adhesion 450 psi
- 100% solids, zero voc 0 g/L
NE257P Novolac Epoxy Colored Primer Acid Solvent Chemical Resistant Floor Coating
From: $55.00
NE258P Novolac Epoxy Clear Primer Acid Solvent Chemical Resistant Floor Coating
From: $55.00- Excellent primer companion to our NE256 Novolac Clear Epoxy topcoat
- Helps reduce air release generation when applying higher solids novolac topcoats
- Outstanding Spill and Splash Acid, Solvent, Chemical surface protection
- Resists wide range of chemicals, solvents and acids
- Excellent adhesion 365 psi
- Long working time with 1 to 3 hour POT life
NE259G Novolac Epoxy Grout Coat Acid Solvent Chemical Resistant Floor Coating
From: $55.00- Outstanding Spill and Splash Acid, Solvent, Chemical surface protection
- Resists wide range of chemicals, solvents and acids
- Low build epoxy to seal surface of existing mortar overlay system
- Great for topcoating/sealing poxy mortar power trowled or hand trowled systems
- Excellent adhesion 425 psi
- Selection of 3 color options
- Low voc <47 g/L
NE3770 Novolac Chemical Resistant Epoxy | High Heat Exposure to 225˚F | Meets USDA Criterea | 100% S...
From: $315.00- High Heat Resistance to 225˚F+
- Strong Chemical Resistance to wide range of chemicals including 70% Sulfuric Acid 90 days+ and 50% Sodium Hydroxide 30 Days
- Great spill, splash and secondary containment chemical spill areas for cement, masonry or brick
- Meets USDA criteria
- High Strength
- 100% solids high build
- Low Odor
- Superior Adhesion
- Selection of clear and 4 color options
Copyright 2023 by Exterior Performance Coatings LLC