Call us (630) 675-4509
Show
Filter by
Filter by
Filter by
Bio-Chime E390 Sealant | Expansion Joints | Elastomeric | VOC Free
From: $80.00- Tank Chime Area: Create a permanently flexible corrosion resistant seal on chime surfaces of storage tanks and similar structures
- Expansion Joints: Use in situations where other joint compounds would soften or fail by solvent or chemical attack. High resistance to weathering and UV exposure
- Flexible Coating: High flexibility without tearing allows for a durable, chip resistant coating for general applications
Bio-Dur E561 Epoxy Coating for Above Or Below Water Application | Heavy Duty | High Build | Solvent ...
From: $75.00- Advanced Protection:Â Safeguard surfaces against water and oil with hydrophobic and oleophobic properties.
- Easy Application:Â Apply effortlessly using a brush, roller, airless sprayer, or pump sprayer.
- Fast Drying:Â Achieve quick results with a fast drying time.
- Invisible Finish:Â Maintain the natural appearance of surfaces without altering their friction or slip resistance.
- Environmentally Friendly: Water-based formula with no solvents or VOCs, ensuring no unpleasant odors.
- Longevity: Enjoy up to 10 years of protection under suitable conditions.
- Versatile Use: Ideal for a variety of mineral substrates, ensuring vapor permeability without compromising surface integrity.
Bio-Fill E457 | Void Filler | Chemical Resistant | Horizonal ,Vertical and Overhead Application
From: $190.00- Civil Structures: Replacing concrete lost by impact or abrasion in power generation, transportation and port facilities
- Chemical Exposure: Restoration and protection of concrete exposed to chemical attack in sumps, secondary containment and similar areas
- 100% Solids
- VOC Free
- Strong yet lightweight filler
- Horizontal, Vertical and Overhead Applications
- Can be applied underwater
Bio-Flor E183 High Temperature Resistant Floor Epoxy | Fast Cure | Self Leveling | 100% Solids | Air...
From: $80.00- Tank Chime Area: Create a permanently flexible corrosion resistant seal on chime surfaces of storage tanks and similar structures
- Expansion Joints: Use in situations where other joint compounds would soften or fail by solvent or chemical attack. High resistance to weathering and UV exposure
- Flexible Coating: High flexibility without tearing allows for a durable, chip resistant coating for general applications
- High Gloss
- 100% Solids
- Self-Leveling
Bio-Gard 251 Heavy Duty Epoxy Coating | Dry or Damp Surfaces | VOC Free | 100% Solids | Air Shippabl...
From: $228.00- Anticorrosive Coating: Splash zone, excellent abrasion resistance above or below water. Anticorrosive barrier for in-service fuel storage tank interiors and roofs.
- Industrial Maintenance: General purpose chemical resistant lining for waste neutralization pits, secondary containment,etc. Makes an excellent floor and stair coating when used with entrained or broadcast grit.
- Wastewater: Reinforces, smooths and protects concrete exposed to chemical or municipal waste. Especially useful as the final gloss coating rebuilt with other TFT products
- 100% Solids
- Ships Non-Hazardous
Bio-Seal E907 Resin | High Heat Tolerance | Quick Return to Service
From: $100.00- Tank Chime Area: Create a permanently flexible corrosion resistant seal on chime surfaces of storage tanks and similar structures
- Expansion Joints: Use in situations where other joint compounds would soften or fail by solvent or chemical attack. High resistance to weathering and UV exposure
- Flexible Coating: High flexibility without tearing allows for a durable, chip resistant coating for general applications
Chem-Put 32 High Build Epoxy Coating for Chemical Exposures | 100% Solids
From: $180.00- Concrete Repair: High Build Application allows for concrete resurfacing after attack by chemical exposure
- Marine and Offshore: Heavy Duty Repair and sealing compound in wet environments
- Repair Compound: Patching, leak sealing, etc. above and below water on steel and concrete substrates
- Tank Lining: High hydrocarbon chemical resistance with early return to service makes an ideal high build tank lining
- 100% Solids
- VOC Free
- Can be applied on wet surfaces
E100V Vertical Wall High Build Epoxy Coating | Underwater Concrete | Pools | 13 Colors
From: $50.00- No sagging on vertical walls to 12 mils per coat
- Works well on underwater concrete decorative surfaces
- Great for pools and water features
- Good chemical and abrasion resistance
- Long 45 - 90 min pot life
- Outstanding adhesion 475 psi @elcometer
- Comes in 5 color options
- 100% solids, very low voc
E1015V Vertical Wall Epoxy Coating & Primer to 8 Mils No Sag | 11 Colors
From: $50.00- No sagging on vertical walls up to 8 mils per coat
- Good for priming or coating concrete, wood or masonry.
- Good chemical and abrasion resistance
- Long 1 - 1.5 hour pot life
- Excellent adhesion 425 psi @elcometer
- Wide selection of 11 color options
- Water base
E104 Primer Moisture Cured Urethane Zinc Rich Primer
$210.00- Excellent "wetting out" and adhesion to sound rusty steel
- Fast recoating within 4 hours at 75F
- Cures down to 25F on dry surfaces
- "Open" recoat window with proper cleaning
- Passed 1,500 hours in salt spray cabinet
- Used as a primer for Epoxy Coatings
- May be applied up to 90% humidity
- Accepts high heat, up to 300F dry
- Provides "galvanic" steel protection
- Excellent as a field touch-up coat for inorganic Zinc Primers
E144 Epoxy Primer & Base Coat | Concrete Wood metal | Satin Finish | Flexible | 20 Colors
From: $54.00- Commercial Grade Epoxy Primer & Coating
- Versatile Works on Concrete, Wood, Steel
- Helps reduce problems from concrete outgassing (air bubbles)
- Long POT Life 3+ hours Means Easy Dip and Roll Application
- Apply low temp to 40F
- Excellent Adhesion 375 psi
- Flexible
- Wide Variety of 20 Colors
- Great Primer for use with E707HB High Build and other 100% Solids Epoxies
E155CL Damp Condition Clear Epoxy Primer | Moisture Tolerant | Quick Cure | Low Temp 45° | Flexible
From: $60.00- May be Applied to Damp or Moist Concrete Surfaces
- Excellent as a tough, flexible and clear concrete primer and sealer
- When used as clear Concrete Sealer has very low permeability to keep water and chemicals out while reducing concrete dusting, spalling and deterioration
- Excellent Adhesion to Concrete
- Excellent Primer for use with high performance coating systems
- As Quick as 30 min Recoat Time for 100% Solids Epoxy Systems
- Significantly Reduces Chance of Concrete Outgassing Problems
- Easy concrete preparation with either acid etching or concrete diamond grinding
E1703 Epoxy Concrete Primer & Sealer | 100% Solids | Chemical & Abrasion Resistant | Easy...
From: $90.00- Outstanding as a primer on concrete
- Good abrasion resistance
- Excellent adhesion to concrete surfaces
- Used as a clear sealer for concrete floors
- Non-toxic when cured
- Easy to apply with no solvent odors
- Good chemical resistance
- Approvable for food processing
E1850 Epoxy Floor Coating | 100% Solids | High Gloss | Abrasion Resistant | Long 30-40 Min Work Time...
From: $95.00- Easy to Use With Long to 40 Min Work Time
- Garage, Basement, Warehouse, Factory Floors
- 100% Solids
- Extremely high gloss, tile-like finish
- Outstanding wear and abrasion resistance
- Good resistance to blushing
- Excellent adhesion to concrete surfaces
- One coat high film build from 10-60 mils DFT
- Easy to apply with no solvent odors
- Outstanding chemical resistance
- Meets USDA standards for use in food processing plants
E5013 Fast Set Clear Epoxy Primer WB Concrete | Wood | Masonry
From: $65.00- Versatile product good on concrete, masonry, wood surfaces
- Quick 4-6 hour Recoat for same day projects
- Excellent as clear primer for epoxy, polyaspartic and urethane coating systems
- Helps prevent concrete outgassing problems when used as primer
- Long 2 hour pot life
- Excellent adhesion 425 psi
- Good chemical and abrasion resistance
- Water base
E5015 Epoxy Primer WB Coating | Concrete Wood Masonry | 20 Colors
From: $51.00- Versatile product good on concrete, masonry, wood surfaces
- Excellent as primer for epoxy, polyaspartic and urethane coating systems
- Helps prevent concrete outgassing problems when used as primer
- Available in Clear and 20 Colors To Match With Topcoat
- Long 1 - 1.5 hour pot life
- Excellent adhesion 425 psi
- Good chemical and abrasion resistance
- Water base
E5030CL Urethane Clear Sealer / Topcoat WB
From: $60.00- Attractive, clear aliphatic non yellowing finish
- Versatile product good on concrete and masonry surfaces
- Recoat only 1-2 hours & light foot traffic 2-4 hours
- Extended 24Â hour pot life
- Excellent abrasion resistance (Taber Abrasor test only 10 mg loss)
- High Gloss (>80 at 60 degrees)
- Flexible (120% Elongation at break)
- Water based
E555VN Novolac Epoxy | Superior Steel & Concrete Chemical Vertical Protection | Tank Linings
$142.00- Excellent resistance to acids, alkalis, salts, most industrial chemicals and many solvents
- For Use in tough corrosive chemical environments including 98% Sulfuric Acid, 37% HCL and 70% Sodium Hydroxide
- Vertical application to 10 mils DFT.
- Great for Secondary Containment for both steel and concrete surfaces
- Use as Primary Containment and Tank Linings when used as part of specified system
- Excellent abrasion resistance with ceramic filler
- Excellent in battery storage room areas.
- Meets USDA requirements
- May be applied in cold, damp conditions to 45°F with curing down to 35°F
E5820 Oil Stop Epoxy Concrete Primer / Coating For Oil Contamination Areas
From: $55.00- Great for coating over oil contaminated concrete
- Can use as a primer before applying decorative coating systems
- Good as stand alone black colored coating
- Excellent substrate penetration through oil contaminated surfaces
- Excellent adhesion where standard epoxies typically fail
- Long 1 - 2 hour pot life
- High solids, 2 component
E603 Non Skid Epoxy | Truck Bed Liner | Anti-Slip
From: $96.00- Provides safer footing and traction
- Heavy duty non-ski resistance
- Provides excellent slip resistance
- Good water, salt and chemical resistance
- Excellent coating for Diamond Plate
- Cures down to 35F
- Good abrasion and impact
- Ready to use non-skid coating
- Easy to Apply
- Designed for wet areas
EE-121HTÂ Amine Cured 100% Solids Novolac Epoxy | Top Coat | High Heat
From: $85.00- Temperature resistance up to 500F (dry) and spike to 580F (3 hours)
- Strong Chemical Resistance
- 100% Solids
- Very Good Abrasion
- Great for aggressive, industrial applications
EE-70 Amine Cured 100% Solids Epoxy Coating | Secondary Containment | Chemical Resistant | NSF 61 Po...
From: $50.00- Secondary Containment Application
- Can be applied to damp or wet substrates
- 100% Solids
- Chemical and Abrasion Resistant
- Immersion and Non-Immersion Service
EE-71 Amine Cured 100% Solids Novolac Epoxy Topcoat| Secondary Containment | Chemical Resistant | US...
From: $50.00- Secondary Containment Application
- Can be applied to damp or wet substrates
- 100% Solids
- Chemical and Abrasion Resistant
- Immersion and Non-Immersion Service
EE-72 Novolac High Heat Epoxy | Immersion to 245ºF | Dry Heat to 400ºF (3 Hrs) | Secondary Containme...
From: $54.00- Strong chemical resistance to acids and alkalis
- High Heat Environments
- Immersion Service to 245ºF
- Dry Heat to 400ºF (3 Hrs)
- High Build Formula to 100 mils DFT (dry film thickness) in One Coat
- Self-leveling flooring
- 100% Solids
- Excellent flexibility without sacrificing chemical resistance
- High Abrasions Resistance
- Easy to clean surface
EE-80 Solids Epoxy Pre-Primer | Structural Steel, Tanks, Waste Water | Chemical Resistant | USDA | 1...
From: $70.00- Secondary Containment Application
- Can be applied to damp or wet substrates
- 100% Solids
- Chemical and Abrasion Resistant
- Immersion and Non-Immersion Service
MuralGuard Clear Anti-Graffiti Coating | Protect Murals & Public Art to 15 Years | Non-Sacrific...
From: $44.00- Outstanding Protection of Painted Murals and other Public Art projects
- Warranted to sustain repeated graffiti removals to 15 years
- Easy to Clean Graffiti Removal with Level 10 Cleanability Level (ASTM D6578/D6578M-13) & Level 1 Cleanability (ASTM D7089-06)
- Over 160 graffiti cleaning cycles without damage to this tough, 2 part coating
- Easiest graffiti removal is wiping with acetone solvent and no water rinse required
- UV Resistant Will Not Yellow
- Zero VOC- SCAQMD Compliant
- Comes in a Clear, Matte, Satin and Gloss finish
- Excellent Adhesion
- Great Chemical Resistance
- Long POT Life up to 1.5 to 2.0 hours
Polyurethane HD IsoFree Aliphatic 2K Floor Coating | High Gloss Satin Matte Flat | Low Temp 40 °F | ...
From: $68.00- UV Resistant Will Not Yellow
- Zero VOC- SCAQMD Compliant
- Choice of High Gloss, Satin, Matte or Super Matte (nearly flat) Finish
- Clear & White Color
- Excellent Adhesion
- Outstanding Chemical Resistance
- MEK Double rub @50% solids Passed 2,000 Cycles Test
- For Concrete, Brick, Wood, Metal, Tile (glazed & unglazed)
S16 Epoxy Coating | Metals | Immersion Service
From: $88.00- Protective Coating for Metals
- Immersion Service
- Approved in Testing for use with Potable Water
- USDA for Incidental Food Contact
Spraythane FL Epoxy & Urethane Topcoat | Immersion Service | 100% Solids
From: $100.00- Tough and Flexible Resilience
- Immersion Service
- High Tear Resistant
- High Impact Resistant
- Combat Cavitation and Abrasion
- Improved water & Chemical Resistance
- Eliminates moisture sensitivity & toxicity compared to traditional urethane
VandlGuard IsoFree Urethane Non-Sacrificial Anti-Graffiti Painted Wall & Mural | Low Temp 40°F ...
From: $81.00- "Best in Class" Graffiti Protection for the Toughest - Most Important Projects
- Warranted to sustain repeated graffiti removals up to 15 years and 165Â graffiti removals
- Save 50% to 66% in labor application costs with 1 coat protection vs other 10 yr products
- Easy to Clean Graffiti Removal with low cost commercially available solvents
- 160+ graffiti cleaning cycles without damage
- UV Resistant Will Not Yellow
- Zero VOC- SCAQMD Compliant
- Choice of High Gloss, Satin or Matte Finish
- Clear & White Color
- Excellent Adhesion
- Outstanding Chemical Resistance
- Concrete, Brick, Wood, Metal, Plastic, Vinyl
VandlGuard Two Part Urethane Anti-Graffiti Wall & Mural Protect 10 Yr | Low Temp 40°F
From: $228.00- Super Premium Non-Sacrificial Anti-Graffiti Coating
- ASTM D7089-06/D6578 for Easy Level 9 Cleaning!
- Warranted to sustain repeated graffiti removals to 10 years and 60 graffiti removals!
- Quick cure graffiti removal only 24 hrs after applied
- Matte Finish, Satin or High Gloss Option
- UV Resistant Will Not Yellow
- Excellent Chemical Protection
- Excellent Adhesion
- Unpainted / Painted Surfaces
- Water Base, Low VOC, Eco-Friendly
- Concrete, Block, Brick, Wood, Painted Metal, Vinyl
Whiteboard Paint Dry Erase Water Based Polyurethane Coating
From: $65.00- Turns almost any surface into a Dry Erase Whiteboard
- Comes in Clear or White Color
- Write on it only 72 hours after application
- Tough, Durable, Long Lasting Dry Erase Surface
- Scratch Resistant
- Great Chemical and acid resistance
- MEK Double rub @50% solids Passed 2,000 Cycles Test
- Non-yellowing & UV resistant topcoat
- Odor Free and Zero VOC's
- Water Based and Non-Flammable
Copyright 2024 by Exterior Performance Coatings LLC