Call us (630) 675-4509
Show
Filter by
Filter by
Filter by
Hot
5500 Polyaspartic Polyurea Coating Roll Down Low Temp 30°F | 87% Solids | 17 Colors | Flexible 120% ...
From: $250.00- Beautiful Decorative High Gloss Appearance
- Cold Temperature Application to 30F using Fast Set
- Hot and Humid Conditions 100F+ using HHHH version
- 17 colors and clear available
- Long Working time option to 35 minutes
- Highly Adhesive, Flexible 120% elongation & Non-Brittle
- Waterproof, Aliphatic Resists UV Non-Yellowing
- Indoor & Outdoor Floor and Countertop Projects
- Submerged Service Projects Like Pools & Fountains
- Works well on concrete, brick, steel, wood, fiberglass
- Excellent Chemical & Abrasion Resistance
- Optional Fast or Slow Set and 3 High Heat & Humidity options
- Great For Garage Floors Using Chips & Flakes
- Commercial and Industrial Applications
- Use as Stand Alone System or Topcoat to Epoxy
- Easy Squeegee/Roller Application
ARCRETE Epoxy Primer & Rebuild | Horizontal | Secondary Containment| Repair, Smooth or Level |1...
From: $80.00- Rebuild for Repair, Smoothing or leveling of Horizontal Areas
- Solvent and VOC free product
- Used in High Build Areas
- Chemically Resistant
- Rapid Turnaround
ARCTHANE Epoxy & Urethane Caulk | 500% Elongation | Expansion Joint Sealing & Crack Repair
From: $80.00- High elongation and elastomeric
- Flexible resilience
- Improved water & chemical resistance
- Strong Expansion Joint Sealing & Crack Repair
- 100% Solids
- Long Pot Life
Bio-Dur E3000 Wet Surface High Temperature Epoxy Coating | Up To 350°F Immersion
From: $290.00- Anticorrosive Coating: Splash zone, excellent abrasion resistance above or below water
- Encapsulating Coating: Smooth, dense, easily decontaminated coating for steel and concrete
- High Heat, Anti-Abrasion Coating: High Tg coating with hard, abrasion-resistant pigmentation
- Repair Compound: Patching, leak sealing, etc. above and below water
- Wastewater: Reinforces, smooths, and protects concrete exposed to chemical or municipal waste
Bio-Dur E3050 Novolac Epoxy | High Temperature | Wet or Dry Surface Application
From: $100.00- Encapsulating Coating: Smooth, dense, easily decontaminated coating for steel and concrete
- High Heat, Anti-Abrasion Coating: High Heat coating with hard, abrasion-resistant pigmentation
- Tank and Pipeline Liner: Chemical Resistance and high hardness create durable corrosion protective barrier
- Wastewater: Reinforces, smooths and protects concrete exposed to chemical or municipal waste
Bio-Dur E560 Epoxy Coating for Above Or Below Water Application | Heavy Duty | High Build 30-40 mils...
From: $75.00- Anticorrosive Coating: Splash zone, excellent abrasion resistance above or below water
- Marine and Offshore: heavy duty repair and sealing compound in wet environments
- Repair Compound: patching, leak sealing, etc. above and below water on steel and concrete substrates
- Wastewater: Reinforces, smooths and protects concrete exposed to chemical or municipal waste
- Easy Application: Apply effortlessly using a brush, roller, airless sprayer, or pump sprayer.
- Fast Drying: Achieve quick results with a fast drying time.
Bio-Dur E561 Epoxy Coating for Above Or Below Water Application | Heavy Duty | High Build 40-60 mils...
From: $75.00- Advanced Protection: Safeguard surfaces against water and oil with hydrophobic and oleophobic properties.
- Easy Application: Apply effortlessly using a brush, roller, airless sprayer, or pump sprayer.
- Fast Drying: Achieve quick results with a fast drying time.
- Invisible Finish: Maintain the natural appearance of surfaces without altering their friction or slip resistance.
- Environmentally Friendly: Water-based formula with no solvents or VOCs, ensuring no unpleasant odors.
- Longevity: Enjoy up to 10 years of protection under suitable conditions.
- Versatile Use: Ideal for a variety of mineral substrates, ensuring vapor permeability without compromising surface integrity.
Bio-Dur E563 Epoxy Coating for Above Or Below Water Application | Heavy Duty | Quick Curing | Solven...
From: $75.00- Fast curing immersion grade epoxy coating
- Designed for above or below water applications
- Solvent-free heavy-duty epoxy formula
- Excellent adhesion to concrete and steel
- Performs well in industrial and marine environments
- Durable coating for wastewater and containment areas
- Helps reduce maintenance downtime
- Great anticorrosive coating
Bio-Fix E913 | Quick Epoxy Repair | Above or Below Water Application
From: $92.00- Designed for repairs above or below water
- Bonds to wet, damp and submerged surfaces
- Fast cure helps reduce project downtime
- Kevlar fiber rein
- Solvent free, 100% solids epoxy formula
- Great for leak sealing, patching, and dent filling
- Can be immersed immediately after application
- Field friendly 1:1 mix ratio for easier installation
- Suitable for marine, industrial, and infrastructure repairs
- Acts as pressure transfer material for FRP repairs
Bio-Seal E192 Epoxy Sealer | Repair, Reinforce & Mortar Resin | Wet Surface Resin / Fiberglass
From: $70.00- Sealer- used to seal and protect concrete, brick and similar surfaces against chemical attack and penetration by water leading to freeze-thaw damage
- Repair Mortar Resin- used to prepare repair and smoothing mortar by stirring in clean silica sand. Typical sand loading of 100 lbs sand per three (3)gallons of Bio-Seal E192
- 100% Solids
- Formulated with no volatile solvents
- Application in Damp or Wet Surfaces
Bio-Seal E197 Epoxy Primer Sealer & Coating | Low Viscosity | Solvent Free
From: $45.00- Penetrating Sealer: Used to seal and protect concrete, brick and other similar surfaces against chemical attack and water eventration which could lead to freeze- thaw damage
- Reinforcing Sealant: When applied to bare sheetrock surfaces, will penetrate the entire fiber surface and cure to a hard, tough, damage resistant layer. Especially suitable for applications where frequent contact with gurneys, trolleys and similar equipment is anticipated
- 100% Solids
- VOC and Odor Free
Bio-Seal E199 Chemical Resistant Penetrating Epoxy Primer Sealer | 100% Solids
From: $215.00- Penetrating Primer & Sealer — Helps seal and protect concrete, brick, and masonry surfaces against chemical attack, moisture intrusion, chloride exposure, and freeze-thaw damage
- Composite Resin System — Works with fiberglass and carbon fabrics for field-applied composite reinforcement and repair applications
- Mortar Repair & Strengthening — Effective epoxy resin for epoxy-strengthened mortars and industrial repairs such as pump bases
- 100% Solids Formula — VOC-free system with no solvent evaporation during cure
- No Volatile Solvents — Low odor formulation suitable for industrial maintenance environments
- Damp Surface Application — Designed for application to properly prepared damp concrete and masonry substrates
- High Chemical Resistance — Resistant to many industrial chemicals, caustics, hydrocarbons, solvents, and wastewater exposure
Bio-Seal E206 Epoxy Coating | High Temperature Application | 100% Solids | VOC free | Up to 40 mils
From: $100.00- High Temperature Coating: for pipelines, tanks and other equipment. Provides outstanding protection against environment exposures and hydrocarbons
- High Temperature Service
- Ambient Hardening
- Single coat application up to 40 mils
- Long overcoat window
- 100% Solids
- VOC free
- High compressive strength and modulus
E100V Vertical Wall High Build Epoxy Coating | Underwater Concrete | Pools | 13 Colors
From: $50.00- No sagging on vertical walls to 12 mils per coat
- Works well on underwater concrete decorative surfaces
- Great for pools and water features
- Good chemical and abrasion resistance
- Long 45 - 90 min pot life
- Outstanding adhesion 475 psi @elcometer
- Comes in 5 color options
- 100% solids, very low voc
E275 Epoxy Mastic | High Build Chemical Resistant Steel Coating
$190.00- Strong adhesion to properly prepared steel and existing coatings
- Functions as a high-build primer or finish coat
- Self-priming for steel maintenance applications
- Helps resist corrosion creep & undercutting
- Builds up to 12 mils DFT in a single coat
- Protects welds, edges & sharp steel profiles
- Resistant to chemicals, abrasion & impact
- Withstands freshwater & saltwater exposure
- Simple 1:1 mix ratio for easier application
- Suitable for USDA compliant environments
E517M Flake Filled Epoxy Mastic Steel & Concrete Coating | Chemical Containment | Low Temp Cure...
From: $125.00- Self Priming on steel
- Excellent primary containment coating for internal tank linings (when part of specified system)
- Excellent secondary containment coating
- Performs well over epoxy mortars and properly primed concrete surfaces
- Can be applied on damp surfaces
- Excellent chemical resistance to acids, caustics, solvents
- Outstanding impact and abrasion resistance.
- Exceptional adhesion Exceeds 700 psi
- Excellent flexibility pass 7/8" mandrel 180º Bend
- Apply Vertical Surfaces to 15 mils one coat
- Meets USDA requirements.
- Low temp cure version to 25°F
- Low VOC 72 grams/Liter
E591 / E590 Wet Surface Epoxy | Apply Underwater | Cures to 35°F | Concrete – Steel | Floors &...
From: $120.00- May be applied on wet or under water surfaces
- Cold temperature application down to 35°F
- Self-priming on steel and on most concrete applications
- Ideal for marginally prepared and painted surfaces
- Outstanding impact and abrasion
- High film build - Up to 20 mil DFT per coat on horizontal surfaces
- Vertical surfaces to 12 mils
- Excellent coating for manholes
- 100% solids and 0 g/L VOC's
- 3 Colors Available
EE-10 Epoxy Primer | 98% Sulfuric Acid Immersion Service | 100% Solids
From: $88.00- Excellent for 98% Sulfuric Acid Immersion
- Strong Chemical Resistance
- Good in aggressive acid environments
- Immersion and Non-Immersion Service
- Work on Ferrous and Non-Ferrous Metals & Concrete
EE-70 Amine Cured 100% Solids Spray Apply Epoxy | Secondary Containment | NSF 61 Potable Water | USD...
From: $50.00- Secondary Containment Application
- Can be applied to damp or wet substrates
- 100% Solids
- Chemical and Abrasion Resistant
- Immersion and Non-Immersion Service
EE-72 Novolac High Heat Epoxy | Immersion to 245ºF | Dry Heat to 400ºF (3 Hrs) | Secondary Containme...
From: $54.00- Strong chemical resistance to acids and alkalis
- High Heat Environments
- Immersion Service to 245ºF
- Dry Heat to 400ºF (3 Hrs)
- High Build Formula to 100 mils DFT (dry film thickness) in One Coat
- Self-leveling flooring
- 100% Solids
- Excellent flexibility without sacrificing chemical resistance
- High Abrasions Resistance
- Easy to clean surface
EE-95 Novolac Epoxy Rebuild | 100% Solids | Restoration | Vertical
From: $80.00- Rebuild any pit repair
- Smoothing or leveling of vertical areas
- Solvent Free
- VOC Free Product
- Strong chemical resistance
- Applied up to 500 mils without slump
Fastonite E700 Heavy Duty Pool & Fountain Coating | Fiberglass | Concrete | Shotcrete | Gunite ...
From: $90.00- Designed for Pools & Fountains exposed to chlorine, oxidation, and outdoor UV conditions
- 100% Solids Epoxy System with no solvent evaporation
- VOC-Free Formula for low odor applications
- High Chlorine Resistance for demanding aquatic environments
- Ambient Curing Technology for convenient field application
- Durable Foot Traffic Resistance for pool decks and maintenance areas
- Microfiber Reinforcement Compatible for enhanced wear protection
- Available in 8 Color Options for pools and decorative water features
GasPruf E132 Reinforced Epoxy Coating
From: $215.00- Anticorrosive Coating: "Super-Duty" anticorrosive for in-service fuel storage tank interiors and roofs
- Repair Compound: Patching, leak sealing etc. above and below water or hydocarbon fuels
- Displaces water or hydrocarbons such as gasoline or diesel fuel from wetted surfaces
- Solvent Free
- 100% Solids
Hot
Mend-Con RTU Concrete Repair | Wet Conditions & Underwater | Vertical No Sag | Quick Cure | Pai...
$540.00- Repair in Wet conditions - Apply Underwater
- Great for Pool Repairs
- High strength epoxy
- Bonds to fresh or hardened concrete, stucco, wood, metal
- No Sag No Drip Formula - perfect for Vertical, Overhead or Horizontal surfaces
- Quick Cure Dries to touch 15 minutes, paint in 1 hour and drive on it in 8 hours (temperature dependent)
- 2x as strong as most concrete - Compressive strength 8000 psi
- Easy To Apply – Convenient ready-to-use cartridge system
- Wide application temperature 40°F – 100°F
- Paintable surface
- Comes in Case of 12 Cartridges & Cartridge Gun
S16 Epoxy Coating | Metals | Immersion Service
From: $88.00- Protective Coating for Metals
- Immersion Service
- Approved in Testing for use with Potable Water
- USDA for Incidental Food Contact
SLR-20 Epoxy & Urethane Hybrid | High Elongation | Elastomeric | Impact & Tear Resistant
From: $260.00- High elongation and elastomeric
- High Resilience
- Tear Resistant
- Impact Resistant Flooring/ Coating
Tower-Gard E568 Anticorrosive Coating for Steel and Galvanizing
From: $120.00- Anticorrosive Coating: For structural steel and galvanized surfaces in atmospheric service. Tower-Gard E568 is uniquely tolerant of compromised surfaces. Tower-Gard E568 can be applied over all types of tightly adherent existing coatings as well as to bare steel or galvanizing.
- Displace water from wet surfaces
- Use in Underwater
- Low Toxicity
- Ships Non-Hazardous
UW601 Underwater Concrete Crack Filler Epoxy Paste Repair
$350.00- Make Repairs Underwater or on Wet Surfaces
- Concrete and Masonry
- Both Horizontal & Vertical Repairs
- Good for Cracks up to 1/8" and Thin Build Repairs
- Apply 35F - 90F
- 100% solids with 0 voc
- Low odor
UW602 Underwater Pourable Concrete Crack Filler Epoxy Repair
$325.00- Make Repairs Underwater or on Wet Surfaces
- Concrete, Cement and Masonry
- Both Horizontal & Vertical Repairs
- Good for Larger Cracks and Wide Variety of Repairs
- Easy to Use Pourable Formula
- 100% solids with 0 voc
- Low odor
Copyright 2024 by Exterior Performance Coatings LLC