Return to previous page
Filters
Show
Hot
5500 Polyaspartic Coating Polyurea Aliphatic, Flexible, Waterproof

5500 Polyaspartic Polyurea Coating Roll Down Low Temp 30°F | 87% Solids

From: $149.00

  • Beautiful Decorative High Gloss Appearance
  • Cold Temperature Application to 30F using Fast Set
  • Easy Squeegee/Roller Application
  • Waterproof, Aliphatic Resists UV Non-Yellowing
  • Indoor & Outdoor Floor and Countertop Projects
  • Good In Submerged Service Projects Like Fountains
  • Works well on concrete, brick, steel, wood, fiberglass
  • Excellent Chemical & Abrasion Resistance
  • Highly Adhesive, Flexible & Non-Brittle
  • Optional Fast or Slow Set, High Heat & Humidty
  • Great For Garage Floors Using Chips & Flakes
  • Commercial and Industrial Applications
  • Use as Stand Alone System or Topcoat to Epoxy
Select options
CR-0302 Clear-Seal 100% Urethane High Gloss Sealer

CLEAR-SEAL 100% Urethane High Gloss Super Premium Sealer

From: $167.00

  • High Gloss Super Premium Sealer
  • Hot Tire Pickup & UV Resistant
  • Great For Driveways, Walkways, Decks, Wall Murals
  • Water Base, Low VOC, Eco-Friendly
  • Chemical and Spill Resistant
  • Excellent Adhesion
  • Anti-Slip Finish Available
  • For Concrete, Brick, Pavers, Stone, Unglazed Tile and Wood
  • Specified by Architects in 099123, 099723, 099313
Select options
CU-0101 Clear-Seal High Gloss Acrylic Urethane Sealer

CLEAR-SEAL High Gloss Acrylic Urethane Sealer

From: $75.00

  • High Gloss Premium Sealer
  • Hot Tire Pickup & UV Resistant
  • Great For Driveways, Walkways, Decks, Wall Murals
  • Water Base, Low VOC, Eco-Friendly
  • 5 Year Labor & Material Warranty
  • Specified by Architects in 099123
Select options

E322HW High-Gloss Aliphatic Urethane Abrasion & Chemical Resistant Low Temp 45°F

From: $60.00

  • Outstanding durability with impact resistance of 160 in lb (Gardner Impact test)
  • Cold temperature application down to 45°F
  • Excellent abrasion resistance Only 22 mg loss (Tabor Abrasion test) Reduced to 10 mg loss using our High Wear 325 additive
  • Excellent Chemical Resistance
  • Aliphatic, UV Stable and will not yellow
  • Easy to Use with Long 2-4 Hour Pot Life
  • Great for both Indoor and Outdoor Concrete Floor Projects
  • Comes in wide Variety of Clear and 18 Different Colors
  • Solvent Based - Excellent adhesion
Select options
E352P Polyester Polyurethane Light Blue

E352P Hi-Gloss Polyester Polyurethane Floor Coating | Chemical Abrasion Resistant | Exterior Interio...

From: $205.00

  • Great Interior & Exterior Horizontal Concrete & Steel Protection
  • Exceptional Exterior Durability
  • Excellent weather resistance
  • Non-chalking and non-yellowing with excellent gloss and color retention
  • Extremely tough, yet flexible
  • A tile-like finish.
  • Easy to clean
  • Excellent chemical and stain resistance
  • Highly resistant to abrasion and impact
  • Outstanding wearing properties
  • Handles up to 250°F Dry Service
  • Long 4 hour POT life @ 75ºF
  • Available in clear and 11 colors
Select options
Tan Color

E356HG High Gloss Urethane Moisture Cured | Exceptional Abrasion & Chemical Resistance | UV Sta...

From: $70.00

  • Superior abrasion resistance Only 4.4 mg loss (Tabor Abrasion test)
  • Outstanding Chemical Resistance
  • Excellent durability with impact resistance of 100 in lb (Gardner Impact test)
  • Aliphatic, UV Stable and will not yellow
  • Easy to Use one part with Long 3-5 Hour Pot Life
  • Great for both Indoor and Outdoor Concrete Floor Projects
  • Solvent Based With Excellent adhesion
Select options
Custom-Pink E370P Polyurethane

E370P Hi-Gloss Hi Build Polyurethane | Non-Yellowing | For Vertical Concrete and Steel | Walls

From: $125.00

  • Great Interior & Exterior Vertical Concrete & Steel Protection
  • Exceptional Exterior Durability
  • High solids
  • Tile-like finish.
  • Easy to clean
  • Good chemical and stain resistance
  • Highly resistant to abrasion and impact.
  • Excellent gloss and color retention to UV exposure
  • Pass 2500 hrs - QUV Accelerated Weathering ASTM D4587
  • Outstanding wearing properties.
  • Non-chalking and non-yellowing
  • High film build
  • Handles up to 300°F Dry Service
  • Long 4-6 hour POT life @ 75ºF
  • Available in clear and 21 colors
Select options
High Gloss Urethane

E5030CL Urethane Clear Sealer / Topcoat WB

From: $55.00

  • Attractive, clear aliphatic non yellowing finish
  • Versatile product good on concrete and masonry surfaces
  • Recoat only 1-2 hours & light foot traffic 2-4 hours
  • Extended 24 hour pot life
  • Excellent abrasion resistance (Taber Abrasor test only 10 mg loss)
  • High Gloss (>80 at 60 degrees)
  • Flexible (120% Elongation at break)
  • Water based
Select options
Rainguard Gloss Sealer and Water Repellent 1 Gallon premium grade

Gloss Sealer For Masonry and Wood | Premium Grade Acrylic

From: $42.00

  • Premium Grade Sealer and Water Repellent Offering a Nice Glossy Look
  • For Concrete, Masonry, Brick, Wood
  • Use on Painted or Unpainted Surfaces
  • Adds Stain Resistance for Easier Cleanup
  • Clear Finish Will Not Yellow
  • To 5 Year Satisfaction Guarantee
  • Eco-Friendly and Easy To Apply
READY-TO-USE and CONCENTRATE
Select options
H2O Hyperthane High Gloss Uretheane Concrete Floor Sealer

H20 ZioTHANE Semi-Gloss Urethane Concrete Floor Sealer/Topcoat

From: $89.00

  • Tough, Durable Concrete Floor Sealer
  • Topcoat for Epoxy Floor Coatings
  • Excellent Chemical and Abrasion Resistance
  • Exceptional Impact Resistance
  • Aliphatic, UV Stable and Will Not Yellow
  • Beautiful Clear, High Gloss Appearance
  • Designed for High Traffic and Industrial Areas
  • Water Based, Low voc <10 g/L
Select options
Polyurethane HD

Polyurethane HD IsoFree Aliphatic 2K Floor Coating | High Gloss Satin Matte | Low Temp 40 °F

From: $64.00

  • UV Resistant Will Not Yellow
  • Zero VOC- SCAQMD Compliant
  • Choice of High Gloss, Satin or Matte Finish
  • Clear & White Color
  • Excellent Adhesion
  • Outstanding Chemical Resistance
  • MEK Double rub @50% solids Passed 2,000 Cycles Test
  • For Concrete, Brick, Wood, Metal, Tile (glazed & unglazed)
Select options
CR-1401 Satin-lok High Gloss Acrylic Concrete & Wood Sealer

Satin-Lok Wet Look High Gloss Acrylic Sealer

From: $58.00

  • High Gloss Wet Look Acrylic Water Sealer
  • UV Resistant Will Not Yellow
  • 5 Year Warranty
  • Water Base, Low VOC, Eco-Friendly
  • Professional Grade
  • Painted & Unpainted Concrete, Masonry, Wood
Select options
TPC-0201 Wet-Look SEealer (1 Gal) RTU

Wet Look High Gloss Acrylic Sealer For Wood & Masonry

From: $44.00

  • High Gloss "Wet Look" Acrylic Sealer
  • Beautiful Appearance
  • Interior and Exterior Surfaces
  • For Concrete, Masonry, Brick, Stone, Wood
  • Breathable Coating
  • UV Resistant Will Not Yellow and Eco-Friendly
Select options

Copyright 2022 by Exterior Performance Coatings