No products in the cart.
Return To Shop Call us (630) 675-4509
High performance Epoxy, Polyurea / Polyaspartic Coatings, Sealants, Adhesives, Joint Fillers for Concrete, Steel, Wood
Show
Filter by
Filter by
Filter by
1007 Polyurea Coating Fast Set Waterproof Elastomeric Spray | Flexible 600%+ Elongation | 10-30 Seco...
From: $160.00- 100% Pure Polyurea Waterproof Spray Coating
- Fast 10-30 Sec Set Time - Quick Back In-Service
- Flexible Elastomeric Spray 600%+ Elongation
- Excellent Chemical, Abrasion Impact Resistance
- Unlimited mil/coat & unlimited recoat window
- Use on Concrete, Metal, Wood
- Good for Garages, Marine Environments, Secondary Containment, Industrial Applications
3003 Polyurea Slow Set Interior Control Joint Filler | Low Temp -20°F
From: $176.00- Offers load transfer across control joints for good protection of edges
- Back-in-Service "Drive-Over" in 30 to 60 minutes
- Longer working time than the 3004 Fast Set Polyurea
- 5-8 Minute Gel Time @ 77°F
- Meets USDA Requirements for incidental food contact
- Stays Flexible In Extreme Cold
- Cold Applications down to -20°F (-29°C)
- Not Sensitive To Moisture
- Self-leveling
- High Impact Resistance
- Excellent Abrasion Resistance
- Chemical Resistant
- Apply using dual component pump, 300 ml x 300 ml cartridge kit or hand application (small projects)
- 100% Solids, No VOC, No Odor
3004 Polyurea Fast Set Interior Control Joint Filler | Low Temp -20°F
From: $176.00- Quick Back-in-Service "Drive-Over" in only 20-30 minutes
- Offers load transfer across control joints for good protection of edges
- Ideal for High Speed Application using Machine Dispensing System or for small projects easy application using twin cartridge kits and 300 ml x 300 ml cartridge kits (total 21 oz or 600 ml per cartridge kit)
- Tack Free only 2-3 minutes
- Meets USDA Requirements for incidental food contact
- Stays Flexible In Extreme Cold with 300% Elongation
- Cold Applications down to -20°F (-29°C)
- Not Sensitive To Moisture
- Non-Flammable
- Self-leveling
- High Impact Resistance
- Excellent Abrasion Resistance
- Chemical Resistant
- 100% Solids, No VOC, No Odor
3246 Polyurea Flexible Expansion Joint Filler | Exterior Interior | Low Temp -20°F | Elongation 600%...
From: $185.00- Quick 30 Min Back In-Service Joint Repair
- Extremely Flexible 600%+ Elongation for extreme conditions
- Abrasion, Chemical and Fuel Resistant
- Great for Concrete Driveways, Parking Garages, Bridges, Warehouses
- Outdoor control joint & all expansion joints
- 100% Solids, Self leveling
- Apply using High Speed Machine Application and for small projects easy application using twin cartridge kits and 300 ml x 300 ml cartridge gun
- Cold Application Down to -20°F (-26°C)
***MAY BE 1-3 WEEK LEAD TIME BEFORE SHIPPING. PLEASE CALL 630.675.4509 FOR SPECIFICS****
Hot
5500 Polyaspartic Polyurea Coating Roll Down Low Temp 30°F | 87% Solids | 5 Set Times | Flexible 120...
From: $145.00- Beautiful Decorative High Gloss Appearance
- Cold Temperature Application to 30F using Fast Set
- Hot and Humid Conditions 100F+ using HHHH version
- Long Working time option to 35 minutes
- Highly Adhesive, Flexible 120% elongation & Non-Brittle
- Waterproof, Aliphatic Resists UV Non-Yellowing
- Indoor & Outdoor Floor and Countertop Projects
- Submerged Service Projects Like Pools & Fountains
- Works well on concrete, brick, steel, wood, fiberglass
- Excellent Chemical & Abrasion Resistance
- Optional Fast or Slow Set and 3 High Heat & Humidity options
- Great For Garage Floors Using Chips & Flakes
- Commercial and Industrial Applications
- Use as Stand Alone System or Topcoat to Epoxy
- Easy Squeegee/Roller Application
Hot
5500HS 100% Solids Polyaspartic Polyurea Coating Roll Down | Low Temp 30°F | Flexible 120% Elongatio...
From: $375.00- Beautiful Clear HIGH GLOSS Appearance
- 100% Solids For Thick 1 Coat Coverage Full Flake, Quartz, Silica Sand Systems to 16 mils DFT (100 sq'/gallon)
- Quick 24 hour back in-service (at 75F)
- Waterproofing Elastomeric Systems
- Good In Submerged Service Projects Like Fountains
- Works well on concrete, brick, steel, wood, fiberglass
- Outstanding Chemical Resistant
- Excellent Abrasive Resistance
- Excellent flexibility with 120% Elongation
- Highly Adhesive
- Excellent Non-Yellowing UV Resistance For Very Clear Finish
- Conforms to the USDA requirements for incidental food contact
- Polyurea performance in an easy to apply roll down formula. Read: basic installation guidelines
Hot
5500M Matte Finish Polyaspartic Polyurea Coating Roll Down | Low Temp 30°F | 89% Solids | Flexible 1...
From: $250.00- Beautiful Clear MATTE FINISH Appearance
- Cold Temperature Application to 30F
- Quick 1 to 2 hr recoat & 24 hr back in-service (at 75F)
- Highly Adhesive, Flexible 120% elongation & Non-Brittle
- Waterproof, Aliphatic Resists UV Non-Yellowing
- Indoor & Outdoor Floor and Countertop Projects
- Submerged Service Projects Like Pools & Fountains
- Works well on concrete, brick, steel, wood, fiberglass
- Excellent Chemical & Abrasion Resistance
- Great For Garage Floors Using Chips & Flakes
- Commercial and Industrial Applications
- Use as Stand Alone System or Topcoat to Epoxy
- Easy Squeegee/Roller Application
Hot
5500V Vertical Polyaspartic Polyurea Coating | Low Temp 30°F | 89% Solids | Flexible 120% Elongation...
From: $260.00- Offers exceptional vertical wall protection in a single application
- Beautiful Clear Appearance
- Quick recoat time in as little as 1 – 1.5 hours
- 89% High Solids Formula
- Waterproofing Elastomeric Systems
- Good In Submerged Service Projects Like Pools and Fountains
- Works well on concrete, brick, steel, wood, fiberglass
- Outstanding Chemical Resistant
- Excellent Abrasive Resistance
- Excellent flexibility with 120% Elongation
- Highly Adhesive
- Self Priming With No Primer Required
- Excellent Non-Yellowing UV Resistance For Very Clear Finish
- Conforms to the USDA requirements for incidental food contact
- Cold Weather Apply Down to 30F
6007 Wet Condition Epoxy For Concrete & Steel | Low Temp 35°F
From: $543.00- Protect Problem Wet and Damp Areas
- Withstands to 15-18 PSI Hydraulic Vapor Pressure
- Cold temperature down to 35°F
- Designed to Protect both Concrete and Steel
- Use as Primer With Topcoat or Floor Coating
- Offers Excelllent Moisture and Corrosive Protection with Outstanding Adhesion
- 100% Solids, no VOC, 2 Component
Hot
6009 Epoxy Floor Coating Industrial & Commercial Low Temp 35°F | 100% Solids | Quick Cure
From: $110.00- Commercial, Industrial, Residential Concrete Floors
- Cold temperature down to 35°F
- Tough - Attractive Looking Epoxy
- Good Chemical, Abrasion, Impact Resistance
- Quick 4 to 7 hour set time
- Self Priming With No Primer Required
- 100% Solids, no VOC, 2 Component
- Clear or Selection of Colors
- Excellent Protection at Lower Cost
7001 Polyurethane Primer Concrete & Steel | Quick Cure | Exceptional Adhesion | Low 35F Temp
From: $80.00- Concrete & Steel Primer For Epoxy, Urethane, Polyaspartic, Polyurea Coatings
- Cross-links With Polyurea, EPDM Roofing and other Plastic Materials Difficult to Bond to
- Deep Penetrating Exceptional 1200 psi Adhesion
- Superior Corrosion, Abrasion and Water Resistance
- For Use in Submerged Service Applications
- Quick 1 hr recoat (based on temp & humidity)
- Semi-flexible & impact resistance
- Reduced concrete outgassing problems
- Moisture Cured easy to use 1 Component
- Wide application range 35°F - 125°F (1.7°C - 52°C)
- Available in black and non-pigmented clear (h0ney comb color).
800 Slow Set Polyurea Adhesive Sealant & Caulk
From: $146.00- Self Leveling, Tough, Flexible, Sandable, Paintable
- Chemical and Fuel Resistant Polyurea
- Repair Concrete Cracks
- Seals Plastic Connectors and Fittings
- For Metals, Plastics, Fiberglass, Steel, Wood, Urethane, Polyurea, Concrete
- 100% Solids, no VOC, 2 Component
- Option for easy application using twin cartridge kits and 300 ml x 300 ml cartridge gun
830 Fast Set Polyurea Repair | Joint Sealant | Caulk | Adhesive | No Sag Walls | Concrete | Steel | ...
From: $146.00- Tough, Flexible, Fast Set, Sandable, Paintable
- Bonds to Concrete, Steel, Wood, Plastic, Fiberglass, Polyurea, Urethane
- Repair Concrete Floors & Walls - Holds Vertical Bead
- Chemical and Fuel Resistant Polyurea
- Cold weather application down to -20F
- Seal Plastic Connectors, Fittings
- Quick, Easy, Effective Repair of Concrete Cracks
- 3 Set Times Hard in 10 min, 15-20 min, 30-40 min
- 100% Solids, no VOC, 2 Component
- Option for easy application using twin cartridge kits and 300 ml x 300 ml cartridge gun
CMW 8000 Lithium Moisture Vapor Barrier and Concrete Densifier
From: $54.00- Deep Penetrating Concrete Vapor Barrier
- Reduce Hydrostatic Vapor Pressure on Concrete Floors
- Prevent Damage to Floor Coatings and Flooring
- Densifier Adds 20% - 40% Strength to Concrete
- Helps Stops Efflorscence and Concrete Dusting
- Permanent One Time Application
Pigment Color For 5500 Polyaspartic Coating
$56.00- Pigment Designed to Color the 5500 Polyaspartic made by ASTC Polymers
- Add a Beautiful Decorative Color to Your 5500 Polyaspartic Project
- 7 Different Colors to Choose From!
- Sold in Quart Containers - Colors 2-3 Gallons When Mixed Into Clear 5500
Polybead Anti-Slip Additive | Least Change Appearance | Easy to Clean & Use | 2 Grit Sizes
From: $32.00- Adds skid resistance & texture profile to a surface
- Least Change in Surface Appearance & Easiest to Clean
- Use with Epoxy, Polyaspartic, Urethane, Polyurethane and most coatings
- Very small amounts required
- Lightweight aggregate, blends well into coating
- Does not have to be surface broadcast over coating
- Does not change physical properties of the coating
- Reduces surface dirt accumulation for easy cleaning
- Appearance better than sand
- Can be used on decorative floors using chips
- Excellent in marine environments
- High hydrolitic stability
ProGrout (formerly 4034) Polyurea Concrete Quick Repair | Ultra Low Viscosity | Apply Low Temp -20°F...
From: $180.00- Back-in-service as fast as 30 min with heavy forklift loads
- Meets OSHA fork lift operator floor facility safety, surface conditions
- Save Bearings & Wheels On Electric Pallet Jacks and Electric Lifts.
- Meets USDA requirements
- Cold applications down to -20°F (-26°C)
- Nano-locks, penetrates deep into small concrete cracks with very low viscosity
- Fuel resistant
- Increase productivity by providing smooth operating surface any temp
- Reduces facility “down-time” & maintenance man hours
- Mix with sand for additional strength for larger crack and holes repairs
- High tensile strength & durability (as strong or stronger than surrounding concrete)
- Very low voc <5 g/L and Low odor
Static Mixer Used With 21 oz Dual Cartridge Concrete Repair & Joint Filler Kits
$25.00- Replacement Mixers for ASTC Polymers' 21 oz cartridge kits
- Allows multiple applications from single cartridge kit
- Mixes product in correct ratio and ready to apply
- Select static mixer for your specific cartridge kit
- For use with dual cartridge kits 800, 830, 3003, 3004, 3246, 4034
Product Filter Search
Narrow search using one, two or all product filters at one time. Each selection narrows list further
Surface Applied To
Product Material
Product Color
CSI Specifications
Copyright 2024 by Exterior Performance Coatings LLC