Call us (630) 675-4509
Show
Filter by
Bio-Chime E390 Joint Sealant & Flexible Coating | Expansion Joints | Apply to 2″ Thick | ...
From: $80.00- Tank Chime Area: Create a permanently flexible corrosion resistant seal on chime surfaces of storage tanks and similar structures
- Expansion Joints: Use in situations where other joint compounds would soften or fail by solvent or chemical attack. High resistance to weathering and UV exposure
- Flexible Coating: High flexibility without tearing allows for a durable, chip resistant coating for general applications
Bio-Dur E3000 High Temperature & Chemically Resistant Epoxy | Immersion Service up to 350F | We...
From: $290.00- Anticorrosive Coating: Splash zone, excellent abrasion resistance above or below water
- Encapsulating Coating: Smooth, dense, easily decontaminated coating for steel and concrete
- High Heat, Anti-Abrasion Coating: High Tg coating with hard, abrasion-resistant pigmentation
- Repair Compound: Patching, leak sealing, etc. above and below water
- Wastewater: Reinforces, smooths, and protects concrete exposed to chemical or municipal waste
Bio-Dur E560 Epoxy Coating for Above Or Below Water Application | Heavy Duty | High Build 30-40 mils...
From: $75.00- Anticorrosive Coating: Splash zone, excellent abrasion resistance above or below water
- Marine and Offshore: heavy duty repair and sealing compound in wet environments
- Repair Compound: patching, leak sealing, etc. above and below water on steel and concrete substrates
- Wastewater: Reinforces, smooths and protects concrete exposed to chemical or municipal waste
- Easy Application: Apply effortlessly using a brush, roller, airless sprayer, or pump sprayer.
- Fast Drying: Achieve quick results with a fast drying time.
Bio-Dur E561 Epoxy Coating for Above Or Below Water Application | Heavy Duty | High Build 40-60 mils...
From: $75.00- Advanced Protection: Safeguard surfaces against water and oil with hydrophobic and oleophobic properties.
- Easy Application: Apply effortlessly using a brush, roller, airless sprayer, or pump sprayer.
- Fast Drying: Achieve quick results with a fast drying time.
- Invisible Finish: Maintain the natural appearance of surfaces without altering their friction or slip resistance.
- Environmentally Friendly: Water-based formula with no solvents or VOCs, ensuring no unpleasant odors.
- Longevity: Enjoy up to 10 years of protection under suitable conditions.
- Versatile Use: Ideal for a variety of mineral substrates, ensuring vapor permeability without compromising surface integrity.
Bio-Fill E457 Epoxy Repair | Void Filler to 1″ | Chemical Resistant | Horizonal ,Vertical and ...
From: $190.00- Civil Structures: Replacing concrete lost by impact or abrasion in power generation, transportation and port facilities
- Chemical Exposure: Restoration and protection of concrete exposed to chemical attack in sumps, secondary containment and similar areas
- 100% Solids
- VOC Free
- Strong yet lightweight filler
- Horizontal, Vertical and Overhead Applications
- Can be applied underwater
Bio-Flor E182 Acid Resistant Floor Epoxy | Fast Cure | Self Leveling | 100% Solids | Air Shippable
From: $90.00- Loading Docks: Generally used with aluminum oxide abrasive for maximum durability and traction. Reduces or eliminates sweating following sudden changes in weather from cold to hot and humid.
- Vinyl Asbestos Tile: Encapsulates after preparation by OSHA approved scrubbing. Seals and creates a tough, seamless flooring in any color.
- High Gloss
- 100% Solids
Bio-Flor E183 High Temperature Resistant Floor Epoxy | Fast Cure | Self Leveling | 100% Solids | Air...
From: $80.00- Tank Chime Area: Create a permanently flexible corrosion resistant seal on chime surfaces of storage tanks and similar structures
- Expansion Joints: Use in situations where other joint compounds would soften or fail by solvent or chemical attack. High resistance to weathering and UV exposure
- Flexible Coating: High flexibility without tearing allows for a durable, chip resistant coating for general applications
- High Gloss
- 100% Solids
- Self-Leveling
Bio-Gard E251 Heavy Duty Epoxy Coating | Dry or Damp Surfaces | VOC Free | 100% Solids | Air Shippab...
From: $228.00- Anticorrosive Coating: Splash zone, excellent abrasion resistance above or below water. Anticorrosive barrier for in-service fuel storage tank interiors and roofs.
- Industrial Maintenance: General purpose chemical resistant lining for waste neutralization pits, secondary containment,etc. Makes an excellent floor and stair coating when used with entrained or broadcast grit.
- Wastewater: Reinforces, smooths and protects concrete exposed to chemical or municipal waste. Especially useful as the final gloss coating rebuilt with other TFT products
- 100% Solids
- Ships Non-Hazardous
Bio-Seal E192 Epoxy Sealer | Repair, Reinforce & Mortar Resin | Wet Surface Resin / Fiberglass
From: $70.00- Sealer- used to seal and protect concrete, brick and similar surfaces against chemical attack and penetration by water leading to freeze-thaw damage
- Repair Mortar Resin- used to prepare repair and smoothing mortar by stirring in clean silica sand. Typical sand loading of 100 lbs sand per three (3)gallons of Bio-Seal E192
- 100% Solids
- Formulated with no volatile solvents
- Application in Damp or Wet Surfaces
Bio-Seal E197 Epoxy Primer Sealer & Coating | Low Viscosity | Solvent Free
From: $45.00- Penetrating Sealer: Used to seal and protect concrete, brick and other similar surfaces against chemical attack and water eventration which could lead to freeze- thaw damage
- Reinforcing Sealant: When applied to bare sheetrock surfaces, will penetrate the entire fiber surface and cure to a hard, tough, damage resistant layer. Especially suitable for applications where frequent contact with gurneys, trolleys and similar equipment is anticipated
- 100% Solids
- VOC and Odor Free
Bio-Seal E199 Chemical Resistant Penetrating Epoxy Primer Sealer | 100% Solids
From: $215.00- Penetrating Primer Sealer- used to seal and protect concrete, brick and similar surfaces against chemical attack and penetration by water leading to chloride and freeze-thaw damage
- Reinforcing Penetrant - when applied to bare sheetrock surfaces will penetrate the entire fiber surface into the gypsum and will cure to a hard, tough and damage resistant layer. Especially suitable for applications where frequent contact with gurneys, trolleys and similar equipment is anticipated.
- 100% Solids
- Formulated with no volatile solvents
- Application in Damp Surfaces
Bio-Seal E206 Epoxy Coating | High Temperature Application | 100% Solids | VOC free | Up to 40 mils
From: $100.00- High Temperature Coating: for pipelines, tanks and other equipment. Provides outstanding protection against environment exposures and hydrocarbons
- High Temperature Service
- Ambient Hardening
- Single coat application up to 40 mils
- Long overcoat window
- 100% Solids
- VOC free
- High compressive strength and modulus
Bio-Seal E907 Resin | High Heat Tolerance | Quick Return to Service
From: $100.00- Tank Chime Area: Create a permanently flexible corrosion resistant seal on chime surfaces of storage tanks and similar structures
- Expansion Joints: Use in situations where other joint compounds would soften or fail by solvent or chemical attack. High resistance to weathering and UV exposure
- Flexible Coating: High flexibility without tearing allows for a durable, chip resistant coating for general applications
Chem-Put E32 High Build Epoxy Coating for Chemical Exposures | 100% Solids
From: $180.00- Concrete Repair: High Build Application allows for concrete resurfacing after attack by chemical exposure
- Marine and Offshore: Heavy Duty Repair and sealing compound in wet environments
- Repair Compound: Patching, leak sealing, etc. above and below water on steel and concrete substrates
- Tank Lining: High hydrocarbon chemical resistance with early return to service makes an ideal high build tank lining
- 100% Solids
- VOC Free
- Can be applied on wet surfaces
Fastonite E700 Heavy Duty Pool & Fountain Coating | Fiberglass | Concrete | Shotcrete | Gunite ...
From: $90.00- Swimming Pools / Fountains : Designed for use on fiberglass and plaster pools subject to chlorine and UV exposure
- VOC free
- 100% Solids System
- Ambient Curing
- High Chlorine Resistance
- Good wear protection to foot traffic
GasPruf E132 Reinforced Epoxy Coating
From: $215.00- Anticorrosive Coating: "Super-Duty" anticorrosive for in-service fuel storage tank interiors and roofs
- Repair Compound: Patching, leak sealing etc. above and below water or hydocarbon fuels
- Displaces water or hydrocarbons such as gasoline or diesel fuel from wetted surfaces
- Solvent Free
- 100% Solids
Tower-Gard E568 Anticorrosive Coating for Steel and Galvanizing
From: $120.00- Anticorrosive Coating: For structural steel and galvanized surfaces in atmospheric service. Tower-Gard E568 is uniquely tolerant of compromised surfaces. Tower-Gard E568 can be applied over all types of tightly adherent existing coatings as well as to bare steel or galvanizing.
- Displace water from wet surfaces
- Use in Underwater
- Low Toxicity
- Ships Non-Hazardous
Product Filter Search
Narrow search using one, two or all product filters at one time. Each selection narrows list further
Surface Applied To
Copyright 2024 by Exterior Performance Coatings LLC