ScrubWorx 20.20 ESD Anti-Static Cleaner Concentrate

Coverage per gallon concentrate: 4,000 sq’ (w/double application)

APPLICATION INSTRUCTIONS

EQUIPMENT NEEDED

• Push broom
• Clean and untreated mop
• Buckets

1. For initial maintenance scrubbing or stripping the floor, use Staticworx ESD EcoScrub floor stripper with a gray StaticWorx initial scrub pad.
2. Place a StaticWorx cleaning pad (natural in color, with black strands) onto a low-speed floor machine.
3. Using the mist setting on a trigger sprayer, mist StaticWorx 20.20 over the area to be cleaned.
4. With the low speed machine, distribute the cleaner evenly over the area to be surface cleaned (about a 10’x10’ area at a time) – then begin buffing action.
5. Buff the area until the solution is dry using an even back and forth motion. Approximately 5 passes per row should properly clean the surface, but take extra passes to assure complete surface uniformity.
6. Continue the process until the surface of the entire area has been cleaned and is visually acceptable.
7. Repeating the process a second time will maximize cleaning and appearance, if desired.

Note: Never buff in excess of 375 RPM

USAGE RATES:

Active and highly concentrated, ScrubWorx must always be diluted with water.

• Light soil: ¼ to ½ oz. per gallon of water for damp mopping and general light soil removal.
• Normal soil: 1 oz. per gallon of water will remove and suspend soils and stubborn dirt.
• Heavy soils: 6 oz to 16 oz. per gallon of water.

Will emulsify heavy soils and greases from most surfaces.

NOTICE TO BUYER: DISCLAIMER OF WARRANTIES AND LIMITATIONS ON OUR LIABILITY We warrant that our products are manufactured to strict quality assurance specifications and that the information supplied by us is accurate to the best of our knowledge. Such information supplied about our products is not a representation or a warranty. It is supplied on the condition that you shall make your own tests to determine the suitability of our product for your particular purpose. Any use or application other than recommended herein is the sole responsibility of the user. Listed physical properties are typical and should not be construed as specifications. NO WARRANTY IS MADE, EXPRESSED OR IMPLIED, REGARDING SUCH OTHER INFORMATION, THE DATA ON WHICH IT IS BASED, OR THE RESULTS YOU WILL OBTAIN FROM ITS USE. N0 WARRANTY IS MADE, EXPRESSED OR IMPLIED, THAT OUR PRODUCT SHALL BE MERCHANTABLE OR THAT OUR PRODUCT SHALL BE FIT FOR ANY PARTICULAR PURPOSE. NO WARRANTY IS MADE THAT THE USE OF SUCH INFORMATION OR OUR PRODUCT WILL NOT INFRINGE UPON ANY PATENT. We shall have no liability for incidental or consequential damages, direct or indirect. Our liability is limited to the net selling price of our product or the replacement of our product, at our option. Acceptance of delivery of our product means that you have accepted the terms of this warranty whether or not purchase orders or other documents state terms that vary from this warranty. No representative is authorized to make any representation or warranty or assume any other liability on our behalf with any sale of our products. Our products contain chemicals that may CAUSE SERIOUS PHYSICAL INJURY. BEFORE USING, READ THE MATERIAL SAFETY DATA SHEET AND FOLLOW ALL PRECAUTIONS TO PREVENT BODILY HARM.