Name: Static Mixer Used With 21 oz Dual Cartridge Concrete Repair &amp; Joint Filler Kits
SKU: 9422
Availability: OutOfStock

Return to previous page

static mixer for 21 oz dual cartrige kits

Product Information

$25.00

Replacement Mixers for ASTC Polymers’ 21 oz cartridge kits
Allows multiple applications from single cartridge kit
Mixes product in correct ratio and ready to apply
Select static mixer for your specific cartridge kit
For use with dual cartridge kits 800, 830, 3003, 3004, 3246, 4034

STATIC MIXERS SOLD IN BOX OF 5 UNITS

Size

Clear

SKU: N/A

Categories: Adhesive & Sealants, Adhesives & Sealants, Cartridge Guns, Crack Repair, Crack Repair, Joint Fillers, Joint Fillers

Tags: polyurea sealant, vertical wall concrete repair, waterproof sealant

Description

Product Description

Static Mixer Replacements For Use with 21 oz Dual Cartridge Kits

Static mixer replacments designed for use with ASTC Polymers’ 21 oz dual cartridge polyurea joint filler and concrete crack repair kits. Each cartridge kit is sold with (1) static mixer per 21 oz kit. These are additional static mixers for use when you you don’t anticipate using an entire cartridge in one application. Replacement static mixers allow multiple applications of product from an individual dual cartridge kit. Static mixers allow for proper mixing of product such that material coming out the end of the mixer is ready to be applied. Tip can be cut to various lengths to adjust for width of flow coming out the end

Reviews

3003 Polyurea Slow Set Interior Control Joint Filler | Low Temp -20°F

From: $176.00

Offers load transfer across control joints for good protection of edges
Back-in-Service "Drive-Over" in 30 to 60 minutes
Longer working time than the 3004 Fast Set Polyurea
5-8 Minute Gel Time @ 77°F
Meets USDA Requirements for incidental food contact
Stays Flexible In Extreme Cold
Cold Applications down to -20°F (-29°C)
Not Sensitive To Moisture
Self-leveling
High Impact Resistance
Excellent Abrasion Resistance
Chemical Resistant
Apply using dual component pump, 300 ml x 300 ml cartridge kit or hand application (small projects)
100% Solids, No VOC, No Odor

Weight	N/A
Dimensions	N/A
Size	(12) Cartridge Kits 300 ml x 300 ml (2 gallons total), 10 Gallons, 2 Gallons
Color	Dark Gray
CSI Spec	03317, 03320, 03930
Product Material	Polyurea
Surface Applied To	Concrete
Manufacturer	ASTC Polymers

SX20550 One Man Polymer Pump for Polyurea and Epoxy Joint Filler

SX20550 US SAWS Dual Component 1 Man Polyurea / Epoxy Joint Filler Pump

From: $6,750.00

Reduce Labor Cost - redesigned low profile 1 man use
Significantly Increased application Speed
Reduce Material Waste With Better Control of Flow
Allows Quick Joint Filling vs Cartridge Application
Works With Polyurea and Epoxy 2 Part Joint Fillers
Easy to Use – Inexpensive to Maintain
Twin 6.5 Gal Tanks Each Hold 5 Gal Joint Filler
Semi-Transparent Tanks To Monitor Liquid Level
Easy To Clean Polyethylene Tanks
Dispense 1:1 Ratio or 2:1 Ratio Product
1/2HP 110V Electric Motor, 0-6 GPM Flow Control
220V optional 1/2 HP Electric Motor Available Special Order Lead Time for use outside North America
Cordless Use With Optional Deep Cycle Battery & Power Invertor

PRICE INCLUDES LTL SHIPPING TO COMMERCIAL ADDRESS

Weight	N/A
Dimensions	N/A
Style	One Man Pump
Motor Voltage	110V Motor, 220V Motor

Novolac Epoxy Slurry Acid Solvent Chemical Resistant NE253SL

NE256M Novolac Epoxy Mortar Acid Solvent Chemical Resistant Patch Kit/Resurfacer

From: $83.00

Outstanding Spill and Splash Acid, Solvent, Chemical surface protection
Apply at 1/8" to 1/4" to resurface traffic and chemical spill areas
Used in many chemical immersion projects, curbs, tanks and chemical troughs
Resists wide range of chemicals, solvents and acids
Excellent impact and abrasion resistance
Selection of 4 color options
Low voc <14 g/L

Weight	165 lbs
Dimensions	N/A
Color	Dark Gray, Light Gray, Natural, Red
Size	1/4 Unit Kit (.11 cubic ft), 1/2 Unit (.22 cubic ft), 1 Unit Kit (.44 cubic ft), Bulk Kit (2.2 cubic ft)

7″ Concrete Pro Hand Grinder Kit | Metabo W24-230 | Dust Shroud | (2) 12 Segment Wheels | Loop...

$640.00

Hand-held units that are great for smaller jobs or in combination with walk-behind grinders on larger projects
Use on concrete for cleaning, leveling high spots or uneven floor surfaces, removing glues, mastic, epoxies and other coatings
May be connected to a variety of dust collection systems for dust containment
The unit’s polyurethane dust shroud is long lasting and is offered in full shrouds and convertible models that flip up to allow for edge work along walls
Kit include electric grinder, dust shroud (full or convertible), (2) diamond cup grinding wheels and hardware for mounting threaded diamond cup wheels, ZEC wheels, or polishing pads

Weight	N/A
Style	7" Pro Grinder Kit W24-230