Light Gray
Showing 1–8 of 43 results
-
5500 Polyaspartic Polyurea Coating Roll Down Low Temp 30°F | 87% Solid
- Beautiful Clear Appearance
- Quick recoat time in as little as 1 – 1.5 hours
- Waterproofing Elastomeric Systems
- Good In Submerged Service Projects Like Fountains
- Works well on concrete, brick, steel, wood, fiberglass
-
6009 Epoxy Floor Coating Industrial & Commercial Low Temp 35°F | 100%
- Protective and attractive color coat epoxy flooring system
- Designed to seal floors against abrasion, water, oils and chemicals
- Good Color stability
- Wide application temperature range 35°F to 125°F (1.7°C to 52°C)
- Quick re-coat time 4-5 hours (at 75°F)
-
6700 Premium ESD Static Dissipative Anti-Static Floor Paint | 9 Colors | ANSI/ESD S20.20-2014
- Static dissipative 10e7 - 10e9 ohms
- Conforms to ANSI/ESD S20.20-2014 when tested according to ANSI/ESD STM7.1
- No hot spots
- Excellent adhesion and color retention
- Good resistance to abrasion, oils and washing
-
6700C Premium ESD Static Conductive Anti-Static Floor Paint | 3 Colors | ANSI/ESD S20.20-2014
- Static conductive 10e3 - 10e6 ohms
- Conforms to ANSI/ESD S20.20-2014 when tested according to ANSI/ESD STM7.1
- No hot spots
- Excellent adhesion and color retention
- Good resistance to abrasion, oils and washing
-
E100V Vertical Wall High Build Epoxy Coating | Underwater Concrete | P
- No sagging on vertical walls up to 12 mils per coat
- Good chemical and abrasion resistance
- Works well on underwater concrete decorative surfaces including pools and water features
- Long 45 - 90 min pot life
- Outstanding adhesion 475 psi @elcometer
-
E1015V Vertical Wall Epoxy Coating & Primer to 8 Mils No Sag | 11 Colo
- No sagging on vertical walls up to 8 mils per coat (4 mils DFT)
- Good for priming or coating concrete, wood or masonry.
- Good chemical and abrasion resistance
- Long 1 - 1.5 hour pot life
- Excellent adhesion 425 psi @elcometer
-
E1016 Anti-Slip Epoxy Concrete Floor Coating – 3 Gal Kit | 20 Colors | Tennis Court Like Surface
- Adds a slip resistant finish to concrete floors
- Good for use on surfaces subject to bare foot traffic
- Long 1 - 1.5 hour pot life
- Excellent adhesion
- Good chemical and abrasion resistance
-
E105M Epoxy Mortar Concrete Resurfacer & Patch Kit
- Economical, Easy resurfacing old and damaged concrete floors
- Compressive Strength 8,400 psi ASTM D695
- Heat Deflection Temp 131.7F ASTM D648
- High Build Resurfacing 1/8" to 1/4"
- Patching up to 2" thick