ASTC Polymers
Showing 1–8 of 18 results
-
1007 Polyurea Coating Fast Set Waterproof Elastomeric Spray | Flexible 600%+ Elongation | 10-30 Second Set Time | 100% Solids
- Excellent elongation – 600%+
- Protects wide variety surfaces - concrete, metal, wood etc
- Chemical Resistant
- High Impact & Abrasion Resistance
- Application temperature range 20°F to 200°F
-
10x Polyurea Interior Control Joint Filler | Quick Cure | Cold Temperature Apply Down To 0F
- Quick Back in Service
- Ideal for High Speed Application using Machine Dispensing System or for small projects easy application using twin cartridge kits and 300 ml x 300 ml cartridge kits
- High Shore Hardness for superior protection and support to joint edges
- Cold Application down to 0F
- Rapid curing
-
3003 Polyurea Slow Set Interior Control Joint Filler | Low Temp -20°F
- Offers load transfer across control joints for good protection of edges
- Back-in-Service "Drive-Over" in 30 to 60 minutes
- Longer working time than the 3004 Fast Set Polyurea
- 5-8 Minute Gel Time @ 77°F
- Meets USDA Requirements for incidental food contact
-
3004 Polyurea Fast Set Interior Control Joint Filler | Low Temp -20°F
- Quick Back-in-Service "Drive-Over" in only 20-30 minutes
- Offers load transfer across control joints for good protection of edges
- Ideal for High Speed Application using Machine Dispensing System or for small projects easy application using twin cartridge kits and 300 ml x 300 ml cartridge kits (total 21 oz or 600 ml per cartridge kit)
- Tack Free only 2-3 minutes
- Meets USDA Requirements for incidental food contact
-
3246 Polyurea Flexible Expansion Joint Filler | Quick Cure | Exterior Interior | Low Temp -20°F | Elongation 600%+
- Quick set with "Drive-Over" in 30 to 45 minutes
- High Density Polyurea
- Very Flexible with Elongation ASTM D124 >600%
- Meets USDA Requirements for intermittent contact
- Meets FAA P605 – for airfield joints
-
5500 Polyaspartic Polyurea Coating Roll Down Low Temp 30°F | 87% Solid
- Beautiful Clear Appearance
- Quick recoat time in as little as 1 – 1.5 hours
- Waterproofing Elastomeric Systems
- Good In Submerged Service Projects Like Fountains
- Works well on concrete, brick, steel, wood, fiberglass
-
5500HS 100% Solids Polyaspartic Polyurea Coating Roll Down | Low Temp 30°F | Flexible 120% Elongation | 1:2 Mix Ratio | 1 Coat Coverage
- Beautiful Clear HIGH GLOSS Appearance
- 100% Solids For Thick 1 Coat Coverage Full Flake, Quartz, Silica Sand Systems to 16 mils DFT (100 sq'/gallon)
- Quick 24 hour back in-service (at 75F)
- Waterproofing Elastomeric Systems
- Good In Submerged Service Projects Like Fountains
-
5500M Matte Finish Polyaspartic Polyurea Coating Roll Down | Low Temp 30°F | 89% Solids | Flexible 120% Elongation
- Beautiful Clear MATTE FINISH Appearance
- Quick recoat time in as little as 1 – 1.5 hours and 24 hour back in-service (at 75F)
- Waterproofing Elastomeric Systems
- Good In Submerged Service Projects Like Fountains
- Outstanding Chemical Resistant