Thin Film Technology
Showing 9–16 of 22 results
-
Bio-Fix E913 | Quick Epoxy Repair | Above or Below Water Application
- Adhesive: Excellent all-purpose adhesive for use above and below water with excellent temperature resistance
- Repair Compound: Patching, leak sealing, etc. above and below water on steel and concrete substrates
- Pressure Transfer Compound: Rapid curing and high build for quick fix dent filling. Acts as pressure transfer material for FRP repairs
- Above or Below Water Application
- Quick Curing
-
Bio-Flor E182 Acid Resistant Floor Epoxy | Fast Cure | Self Leveling | 100% Solids | Air Shippable
- Loading Docks: Generally used with aluminum oxide abrasive for maximum durability and traction. Reduces or eliminates sweating following sudden changes in weather from cold to hot and humid.
- Vinyl Asbestos Tile: Encapsulates after preparation by OSHA approved scrubbing. Seals and creates a tough, seamless flooring in any color.
- High Gloss
- 100% Solids
-
Bio-Flor E183 High Temperature Resistant Floor Epoxy | Fast Cure | Sel
- Loading Docks: Used with aggregate to add durability and traction. Reduces or eliminates sweating following sudden changes in weather from cold to hot and humid.
- High Temperature Exposure: Added high temperature components provide increased temperature resistance to dry heat and direct contact
- Vinyl Asbestos Tile: Encapsulates after preparation by OSHA approved scrubbing. Seals and creates a tough, seamless flooring in any color.
- High Gloss
- 100% Solids
-
Bio-Gard E255 Severe Service Epoxy | Surface Tolerant Chemical Resista
- Chemical Resistance Areas: Designed for applications where resistance to aggressive chemicals is needed
- Industrial Maintenance: Heavy duty lining for steel and concrete where extreme resistance to aggressive chemicals such as 50% caustic soda or 98% sulfuric acid is required
- Marine and Offshore: Heavy duty repair and sealing compound for steel exposed to chemical or physical attack
- VOC Free
- 100% Solids
-
Bio-Seal E192 Epoxy Sealer | Repair, Reinforce & Mortar Resin | Wet Surface Resin / Fiberglass
- Sealer- used to seal and protect concrete, brick and similar surfaces against chemical attack and penetration by water leading to freeze-thaw damage
- Repair Mortar Resin- used to prepare repair and smoothing mortar by stirring in clean silica sand. Typical sand loading of 100 lbs sand per three (3)gallons of Bio-Seal E192
- 100% Solids
- Formulated with no volatile solvents
- Application in Damp or Wet Surfaces
-
Bio-Seal E197 Epoxy Primer Sealer & Coating | Low Viscosity | Solvent Free
- Penetrating Primer Sealer: Used to seal and protect concrete, brick and other similar surfaces against chemical attack and water eventration which could lead to freeze- thaw damage
- Reinforcing Sealant: When applied to bare sheetrock surfaces, will penetrate the entire fiber surface and cure to a hard, tough, damage resistant layer. Especially suitable for applications where frequent contact with gurneys, trolleys and similar equipment is anticipated
- 100% Solids
- VOC and Odor Free
-
Bio-Seal E199 Chemical Resistant Penetrating Epoxy Primer Sealer | 100% Solids
- Penetrating Primer Sealer- used to seal and protect concrete, brick and similar surfaces against chemical attack and penetration by water leading to chloride and freeze-thaw damage
- Composite Resin: Works well with fiberglass and carbon fabrics to create field-applied composites
- Mortar Repair: Effective epoxy resin for making epoxy strengthened mortar. Excellent for industrial applications such as pump bases
- 100% Solids
- Formulated with no volatile solvents
-
Bio-Seal E206 Epoxy Coating | High Temperature Application | 100% Solids | VOC free | Up to 40 mils
- High Temperature Coating: for pipelines, tanks and other equipment. Provides outstanding protection against environment exposures and hydrocarbons
- High Temperature Service
- Ambient Hardening
- Single coat application up to 40 mils
- Long overcoat window