Call us (630) 675-4509
Show
Filter by
Filter by
Filter by
800 Slow Set Polyurea Adhesive Sealant & Caulk
$500.00- Self Leveling, Tough, Flexible, Sandable, Paintable
- Chemical and Fuel Resistant Polyurea
- Repair Concrete Cracks
- Seals Plastic Connectors and Fittings
- For Metals, Plastics, Fiberglass, Steel, Wood, Urethane, Polyurea, Concrete
- 100% Solids, no VOC, 2 Component
- Option for easy application using twin cartridge kits and 300 ml x 300 ml cartridge gun
ARCTHANE Epoxy & Urethane Caulk | 500% Elongation | Expansion Joint Sealing & Crack Repair
From: $80.00- High elongation and elastomeric
- Flexible resilience
- Improved water & chemical resistance
- Strong Expansion Joint Sealing & Crack Repair
- 100% Solids
- Long Pot Life
Bio-Seal E192 Epoxy Sealer | Repair, Reinforce & Mortar Resin | Wet Surface Resin / Fiberglass
From: $70.00- Sealer- used to seal and protect concrete, brick and similar surfaces against chemical attack and penetration by water leading to freeze-thaw damage
- Repair Mortar Resin- used to prepare repair and smoothing mortar by stirring in clean silica sand. Typical sand loading of 100 lbs sand per three (3)gallons of Bio-Seal E192
- 100% Solids
- Formulated with no volatile solvents
- Application in Damp or Wet Surfaces
Bio-Seal E197 Epoxy Primer Sealer & Coating | Low Viscosity | Solvent Free
From: $45.00- Penetrating Sealer: Used to seal and protect concrete, brick and other similar surfaces against chemical attack and water eventration which could lead to freeze- thaw damage
- Reinforcing Sealant: When applied to bare sheetrock surfaces, will penetrate the entire fiber surface and cure to a hard, tough, damage resistant layer. Especially suitable for applications where frequent contact with gurneys, trolleys and similar equipment is anticipated
- 100% Solids
- VOC and Odor Free
Bio-Seal E199 Chemical Resistant Penetrating Epoxy Primer Sealer | 100% Solids
From: $215.00- Penetrating Primer Sealer- used to seal and protect concrete, brick and similar surfaces against chemical attack and penetration by water leading to chloride and freeze-thaw damage
- Reinforcing Penetrant - when applied to bare sheetrock surfaces will penetrate the entire fiber surface into the gypsum and will cure to a hard, tough and damage resistant layer. Especially suitable for applications where frequent contact with gurneys, trolleys and similar equipment is anticipated.
- 100% Solids
- Formulated with no volatile solvents
- Application in Damp Surfaces
Bio-Seal E206 Epoxy Coating | High Temperature Application | 100% Solids | VOC free | Up to 40 mils
From: $100.00- High Temperature Coating: for pipelines, tanks and other equipment. Provides outstanding protection against environment exposures and hydrocarbons
- High Temperature Service
- Ambient Hardening
- Single coat application up to 40 mils
- Long overcoat window
- 100% Solids
- VOC free
- High compressive strength and modulus
E1000 Epoxy Concrete Repair Kit | Holes to 1″ | Cracks | Spall | 3 Color
$136.00- Make quick, permanent repairs to concrete
- Patch cracks, spalled concrete and potholes
- Can be applied at ¼” – 1” thickness
- Outstanding adhesion to concrete
- Excellent chemical, abrasion and impact resistance
- USDA approved for food processing plants
- Easy to mix and apply
- 3 Colors Packaged in a 5 gallon pailConcret
E105M Epoxy Mortar Concrete Resurfacer & Patch Kit
From: $66.00- Economical Easy resurfacing old and damaged concrete floors
- Compressive Strength 8,400 psi ASTM D695
- Heat Deflection Temp 131.7F ASTM D648
- High Build Resurfacing 1/8" to 1/4"
- Patching up to 2" thick
- 100% solids epoxy
- Comes complete with epoxy & aggregate
- Selection of 5 color options
- Application temp range 55°F to 90°F
E110M Epoxy Mortar Concrete Premium Resurfacer & Patch Kit
From: $73.00- Easy resurfacing old and damaged concrete floors
- Premium Tough, Durable, Chemical Resistant Protection
- 10% greater coverage/unit vs E105M Epoxy Mortar
- Compressive Strength 11,150 psi ASTM D695
- Heat Deflection Temp 158.9F ASTM D648
- High Build Resurfacing 1/8" to 1"
- Spot Patching up to 2" - 3" thick
- Long 30-40 min POT Life
- 100% solids epoxy
- Comes complete with epoxy and aggregate
- Selection of 5 color options
- Application temp range 55°F to 90°F
E126CW Cold Weather Epoxy Mortar Concrete Resurfacer & Patch Kit 35°F to 80°F
From: $71.00- Great for Cold Weather & Cold Storage Facilities
- Application range 35°F to 80°F
- Easy resurfacing old and damaged concrete floors
- Premium Tough, Durable, Chemical Resistant Protection
- Compressive Strength 11,284 psi ASTM D695
- Heat Deflection Temp 149.9F ASTM D648
- High Build Resurfacing 1/8" to 1/4"
- Patching up to 2" thick
- 100% solids epoxy
- Comes complete with epoxy and aggregate
- Selection of 5 color option
E128AF Arctic Epoxy Mortar Concrete Patch Kit | Cold Condition -10°F to 40°F
From: $70.00- Tough, Durable Cold Winter Weather Concrete Patch & Repair
- Excellent Extreme Cold Condition Patching -10°F to 40°F
- Great For Freezer, Cold Storage and Outdoor Winter Repairs
- High Build Resurfacing 1/8" to 1/4"
- Patching up to 2" thick
- Excellent chemical resistance
- Excellent Abrasion and Impact Resistance
- Compressive Strength 11,000 psi ASTM D695
- Quick recoat 1-2 hrs & 2-4 hrs light foot traffic
- Selection of 3 color options
- Easy to Use 3 part kit Includes Silica Sand or Liquid Only
E343 Quick Fix Concrete Repair Epoxy Urethane Patch Kit | 10 Min Light Traffic | Low Temp 20°F
From: $58.00- Extremely Quick - Walk on it 10 minutes, Full Serivce 1 hour
- Tough Durable Repair as hard as concrete
- Good for use interior & exterior repairs
- Low viscosity Product for Outstanding Adhesion and Deep Penetration of Cracks
- Comes in both small and large patch kits including silica sand and liquid only options
- Use With Sand For Improved Performance and lower repair costs
- Low viscosity (30 cps) Can be Used Without Sand to Penetrate Very Small and Deep Cracks
- Great for cold weather application down 20°F or warm weather up to 90°F
E615 Epoxy Crack Filler | 100% Solids | Vertical, Overhead & Horizontal | Concrete, Steel and W...
$185.00- May be applied up to 1" thick when patching holes
- Excellent chemical, abrasion and impact resistance
- Easily applied with trowel, putty knife or spatula
- Applies up to 1/2 inch vertically
- Excellent for filling bug holes
- Used for leveling base plates and embedding bolts
- Non-Toxic when cured
- Zero VOC
- Excellent for patching concrete in manholes and sewer pipes
Grip E751 | Annulus Void Filler | High Temperature Tolerant | Long Working Time
$1,600.00- Fills large void areas and annulus
- Low exotherm and low viscosity
- Solvent Free Formulation
- No VOC or odor concerns
- Long Pot Life
- Ability to work in High Temperature Climates
HyperCURE Concrete and Wood Repair Kit | Flexible 100% Elongation | Quick Cure | Easy To Apply | Rec...
$165.00- HyperCURE is designed for repairing concrete cracks, joints, spalls and damaged areas before installing coating.
- Cures quickly allowing coating installation same day
- Superior Flexibility 100% Elongation
- Outstanding Bonding
- Fast Cure - 15 to 30 min recoat
- Rapid Cure Rate For Same Day System Application
- High D70 Hardness
- High Tensile & Tear Strength
- Very Easy to Use
- Tough, Durable Epoxy Concrete and Wood Crack Repair, Hole, Spall and Control Joint Filler
NE255P Novolac Epoxy Primer/Sealer Flexible Crack Bridging Chemical Resistant
From: $55.00- Excellent crack bridging, flexible high build primer eliminates need to repair hairline cracks in chemical exposure areas
- Use for priming light to medium duty secondary containment
- Tough, durable coating for surfaces exposed to vehicle traffic
- Outstanding abrasion and impact resistance with only 5 mg loss Taber Abrasion test and 100 inch lbs Gardner Impact Test
- Excellent adhesion 450 psi
- 100% solids, zero voc 0 g/L
NE256M Novolac Epoxy Mortar Acid Solvent Chemical Resistant Patch Kit/Resurfacer
From: $83.00- Outstanding Spill and Splash Acid, Solvent, Chemical surface protection
- Apply at 1/8" to 1/4" to resurface traffic and chemical spill areas
- Used in many chemical immersion projects, curbs, tanks and chemical troughs
- Resists wide range of chemicals, solvents and acids
- Excellent impact and abrasion resistance
- Selection of 4 color options
- Low voc <14 g/L
ProGrout (formerly 4034) Polyurea Concrete Quick Repair | Ultra Low Viscosity | Apply Low Temp -20°F...
From: $180.00- Back-in-service as fast as 30 min with heavy forklift loads
- Meets OSHA fork lift operator floor facility safety, surface conditions
- Save Bearings & Wheels On Electric Pallet Jacks and Electric Lifts.
- Meets USDA requirements
- Cold applications down to -20°F (-26°C)
- Nano-locks, penetrates deep into small concrete cracks with very low viscosity
- Fuel resistant
- Increase productivity by providing smooth operating surface any temp
- Reduces facility “down-time” & maintenance man hours
- Mix with sand for additional strength for larger crack and holes repairs
- High tensile strength & durability (as strong or stronger than surrounding concrete)
- Very low voc <5 g/L and Low odor
Copyright 2024 by Exterior Performance Coatings LLC