steel primer Archives

7001 Polyurethane Primer Concrete & Steel | Quick Cure | Exceptional Adhesion | Low 35F Temp

From: $80.00

Concrete & Steel Primer For Epoxy, Urethane, Polyaspartic, Polyurea Coatings
Cross-links With Polyurea, EPDM Roofing and other Plastic Materials Difficult to Bond to
Deep Penetrating Exceptional 1200 psi Adhesion
Superior Corrosion, Abrasion and Water Resistance
For Use in Submerged Service Applications
Quick 1 hr recoat (based on temp & humidity)
Semi-flexible & impact resistance
Reduced concrete outgassing problems
Moisture Cured easy to use 1 Component
Wide application range 35°F - 125°F (1.7°C - 52°C)
Available in black and non-pigmented clear (h0ney comb color).

Select options

From: $120.00

Excellent breathable waterproofing topcoat that offers a flexible, chemical resistant, non-yellowing film over painted and unpainted surfaces
Great for use as direct to metal corrosion resistant primer over steel
Primer for concrete, masonry, wood, plastic surfaces
Scratch Resistant
Non-yellowing & UV Resistant Topcoat
Anti-Carbonation Protection
Excellent as a protective floor coating in a wide variety of concrete flooring applications
Breathable elastomeric outdoor waterproofer
Comes in a clear, ready to use white and 3 tint bases for custom coloring
Available in 4 gloss levels from matte, satin, semi-gloss to glossy

Select options

From: $55.00

Prime over Steel, metal, weathered galvanized steel, aluminum, fiberglass, polyurethane foam and previously painted surfaces
Excellent “wetting out” properties and performance over sound rusty surfaces
Outstanding abrasion & chemical resistance
Very good weather resistance
Excellent corrosion resistance, passed 1,200 hrs in salt cabinet
Fast recoat 2-3 hours at 75°F & 50% R.H
Cures down to 18°F and apply up to 140°F
High heat resistance to 400°F dry
Single component, easy to use
Topcoat with most Epoxy, Urethane , Silicone
Excellent barrier coat over lead based coatings
USDA Approved

Select options

From: $95.00

High solids DTM (direct-to-metal) chemical resistant steel primer or finish coat to steel and concrete
Self priming to steel including tight rust
Apply Vertical Surfaces to 8 mils DFT Steel & Concrete
Great primer for use with our E1500HN (horizontal) and E555VN (vertical) Novolac Chemical Resistant Epoxies
USDA Approved
Tight film, low permeability.
Exceptional adhesion Exceeds 500 psi
Excellent impact resistance 90 in lb
Excellent abrasion resistance CS 17 Wheel, 1000 cycles, 1000 g Load 21 mg loss
Excellent against rust “undercutting”
Easy to apply brush, roll and spray
Low temp cure version to 25°F
Available 13 colors

Select options

Hot

From: $130.00

Select options

Out of stock

Rust-inhibitive for steel, aluminum, galvanized steel
Excellent corrosion-resistant primer
Use with all acrylic, alkyd, urethane, epoxy topcoats – both solvent & water base
Early moisture resistant
Quick dry to recoat time for faster project turnaround
Low temperature application down to 40F
Use as bonding primer with Cool Coat Thermal Barrier Paint
Available in red-oxide, gray and off-white
Acceptable for use in USDA-inspected facilities
Low VOC, water base, complies with SCAQMD & CARB