Return to previous page
Filters
Show
4034 rapid set polyurea concrete repair

4034 ProGrout Polyurea Concrete Quick Repair | Ultra Low Viscosity | Apply Low Temp -20°F | Low Odor...

From: $175.00

  • Back-in-service as fast as 30 min with heavy forklift loads
  • Meets OSHA fork lift operator floor facility safety, surface conditions
  • Save Bearings & Wheels On Electric Pallet Jacks and Electric Lifts.
  • Meets USDA requirements
  • Cold applications down to -20°F (-26°C)
  • Nano-locks, penetrates deep into small concrete cracks with very low viscosity
  • Fuel resistant
  • Increase productivity by providing smooth operating surface any temp
  • Reduces facility “down-time” & maintenance man hours
  • Mix with sand for additional strength for larger crack and holes repairs
  • High tensile strength & durability (as strong or stronger than surrounding concrete)
  • Very low voc <5 g/L and Low odor
Select options This product has multiple variants. The options may be chosen on the product page
Hot
5500 Polyaspartic Coating Polyurea Aliphatic, Flexible, Waterproof

5500 Polyaspartic Polyurea Coating Roll Down Low Temp 30°F | 87% Solids

From: $149.00

  • Beautiful Decorative High Gloss Appearance
  • Cold Temperature Application to 30F using Fast Set
  • Easy Squeegee/Roller Application
  • Waterproof, Aliphatic Resists UV Non-Yellowing
  • Indoor & Outdoor Floor and Countertop Projects
  • Good In Submerged Service Projects Like Fountains
  • Works well on concrete, brick, steel, wood, fiberglass
  • Excellent Chemical & Abrasion Resistance
  • Highly Adhesive, Flexible & Non-Brittle
  • Optional Fast or Slow Set, High Heat & Humidty
  • Great For Garage Floors Using Chips & Flakes
  • Commercial and Industrial Applications
  • Use as Stand Alone System or Topcoat to Epoxy
Select options This product has multiple variants. The options may be chosen on the product page
830 Polyurea vertical crack repair

830 Fast Set Polyurea Repair | Joint Sealant | Caulk | Adhesive | No Sag Walls | Concrete | Steel | ...

From: $146.00

  • Tough, Flexible, Fast Set, Sandable, Paintable
  • Bonds to Concrete, Steel, Wood, Plastic, Fiberglass, Polyurea, Urethane
  • Repair Concrete Floors & Walls - Holds Vertical Bead
  • Chemical and Fuel Resistant Polyurea
  • Cold weather application down to -20F
  • Seal Plastic Connectors, Fittings
  • Quick, Easy, Effective Repair of Concrete Cracks
  • 3 Set Times Hard in 10 min, 15-20 min, 30-40 min
  • 100% Solids, no VOC, 2 Component
  • Option for easy application using twin cartridge kits and 300 ml x 300 ml cartridge gun
Select options This product has multiple variants. The options may be chosen on the product page
Aspartic 100 Polyaspartic Slow Set Floor Coating

Aspartic 100 High Build Polyaspartic for Concrete Floors | Low Temp 30°F | 100% Solids

From: $99.99

  • Tough, durable topcoat for interior epoxy floor coatings
  • Very low to no odor great for sensitive odor indoor projects
  • Can be used as high build topcoat up to 16 mils or 100 sq'/gallon
  • Cold temperature application down to 30°F
  • Excellent chemical and abrasion resistance
  • UV Stable,  Will Not Yellow
  • Beautiful high gloss appearance
  • Designed for high traffic and industrial areas
  • High solids 100%
  • Available clear & 14 colors (Pigment Sold Separate)
Select options This product has multiple variants. The options may be chosen on the product page
Aspartic 85 Polyaspartic Floorguard Products

Aspartic 85 Polyaspartic Quick Cure Concrete Floor Coating | Low Temp 30°F

From: $79.50

  • Tough, durable topcoat for interior epoxy floor coatings
  • Cold temperature application down to 30°F
  • Fast Curing for quick 5-7 Hours Back in-Service Light Foot Traffic
  • Excellent chemical and abrasion resistance
  • UV Stable and will not yellow
  • Beautiful high gloss appearance
  • Designed for high traffic and industrial areas
  • High solids 85%
  • Available in clear & 14 colors (Colored Pigment Sold Separately)
Select options This product has multiple variants. The options may be chosen on the product page
Aspartic 85 Polyaspartic

Aspartic 85 Slow Set Polyaspartic Concrete Floor Coating | Low Temp 30°F | Low Odor Option

From: $99.99

  • Tough, durable topcoat for interior epoxy floor coatings
  • Cold weather application down to 30°F
  • Benefits of a Polyaspartic With Longer 45-60 minutes Working Times
  • Excellent chemical and abrasion resistance
  • UV Stable and will not yellow
  • Beautiful high gloss appearance
  • Designed for high traffic and industrial areas
  • High solids 85%
  • Available in clear & 14 colors (Colored Pigment Sold Separately)
  • LOW ODOR version now available for indoor projects.
Select options This product has multiple variants. The options may be chosen on the product page
E-Poly Polyurea Floor Coating opt

E-Green Polyurea Basecoat for Concrete Floors | Low Temp 40°F | 100% Solids | 300% Elongation

From: $65.00

  • Tough, durable plant based Polyurea Coating
  • Extreme Flexibility (300% Elongation)
  • Exceptional Adhesion >500 psi ASTM D4541
  • Cold temperature application down to 0°F
  • Can be used as high build basecoat up to 16 mils or 100 sq'/gallon
  • Excellent chemical and abrasion resistance
  • Designed for high traffic and industrial areas
  • 100% Solids Performance
  • Available in clear & 14 colors!
  • Quick Cure 1 Day System
  • Little to NO ODOR
Select options This product has multiple variants. The options may be chosen on the product page
E105M Epoxy Mortar Concrete Patch Resurfacer Kit

E128AF Arctic Epoxy Mortar Concrete Patch Kit | Cold Condition -10°F to 40°F

From: $70.00

  • Tough, Durable Cold Winter Weather Concrete Patch & Repair
  • Excellent Extreme Cold Condition Patching -10°F to 40°F
  • Great For Freezer, Cold Storage and Outdoor Winter Repairs
  • High Build Resurfacing 1/8" to 1/4"
  • Patching up to 2" thick
  • Excellent chemical resistance
  • Excellent Abrasion and Impact Resistance
  • Compressive Strength 11,000 psi ASTM D695
  • Quick recoat 1-2 hrs & 2-4 hrs light foot traffic
  • Selection of 3 color options
  • Easy to Use 3 part kit Includes Silica Sand or Liquid Only
Select options This product has multiple variants. The options may be chosen on the product page
E344QC Polyaspartic Topcoat

E344QC Polyaspartic Quick Cure Concrete Floor Coating | 85% Solids

From: $73.00

  • Tough, durable topcoat for interior epoxy floor coatings
  • Fast Curing for quick back in-service
  • Excellent chemical and abrasion resistance
  • UV Stable and will not yellow
  • Beautiful high gloss appearance
  • Designed for high traffic and industrial areas
  • High solids 85%
  • Available in clear & 13 colors (Colored Pigment Sold Separately)
Select options This product has multiple variants. The options may be chosen on the product page
E344QC Polyaspartic Topcoat

E449 Polyaspartic Fast Cure High Gloss Concrete Floor Coating | 95% High Solids

From: $73.00

  • Tough, durable topcoat for epoxy floor coatings
  • High solids 95%
  • Quick back in service 3-5 hours light foot traffic
  • Can be applied up 12 mils thick one coat (125 sq'/gallon)
  • Excellent chemical and abrasion resistance
  • UV Stable and will not yellow
  • Beautiful high gloss appearance
  • Designed for high traffic and industrial areas
  • Available in clear & 13 colors (Colored Pigment Sold Separately)
Select options This product has multiple variants. The options may be chosen on the product page
E344QC Polyaspartic Topcoat

E450SF Polyaspartic Slow Cure High Gloss Concrete Floor Coating | 90% Solids (Formerly E449SF)

From: $80.00

  • Tough, durable topcoat for interior epoxy floor coatings
  • High solids 90%
  • Can be applied up 12 mils thick one coat (120 sq'/gallon)
  • Long Working time 20-25 min
  • Excellent chemical and abrasion resistance
  • UV Stable and will not yellow
  • Beautiful high gloss appearance
  • Designed for high traffic and industrial areas
  • Available in clear & 13 colors (Colored Pigment Sold Separately)
Select options This product has multiple variants. The options may be chosen on the product page
HyperPRIME Quick Cure Bonding Epoxy Primer

H20 HyperPRIME Epoxy Quick Cure Bonding Primer | Low Temp 45°F | 3 Hr Recoat

From: $40.00

  • Excellent Substrate Penetration with superior adhesion 450 psi
  • Great for concrete, wood and metal surfaces
  • Helps protect Against Coating Damage from Outgassing of Concrete
  • Quick Cure With 3 Hour Recoat Time - great for 1 day floor coating systems
  • Available in Clear plus 6 Colors
  • Water Base, No Offensive odors
  • Cold temperature application down to 45F
  • Good chemical and Stain Resistance
  • Easy Application
***AVAILABLE in 1 QUART SHIPPED GROUND OR 5 GALLON PAILS FOR PURCHASE WHEN PART OF A LARGER PALLET QUANTITY ORDER SHIPPED BY TRUCK****
Select options This product has multiple variants. The options may be chosen on the product page

Copyright 2024 by Exterior Performance Coatings LLC