metal primer
Showing all 10 results
-
7001 Polyurethane Primer Concrete & Steel | Quick Cure | Exceptional Adhesion | Low 35F Temp
- Concrete & Steel Primer For Epoxy, Urethane, Polyaspartic, Polyurea Coatings
- Cross-links With Polyurea, EPDM Roofing and other Plastic Materials Difficult to Bond to
- Deep Penetrating Exceptional 1200 psi Adhesion
- Superior Corrosion, Abrasion and Water Resistance
- For Use in Submerged Service Applications
-
AcrylicPoly DTM² Acrylic Modified Polyurethane WaterProofer & Primer | Flexible | Metal Concrete Masonry Wood Plastic | Non-Yellowing
- Excellent breathable waterproofing topcoat that offers a flexible, chemical resistant, non-yellowing film over painted and unpainted surfaces
- Great for use as direct to metal corrosion resistant primer over steel
- Primer for concrete, masonry, wood, plastic surfaces
- Scratch Resistant
- Non-yellowing & UV Resistant Topcoat
-
E100 Urethane Primer Finish Coat | Aluminum Galvanized & Rusty Steel | Dry Heat to 400 °F | Apply Down to18°F | Quick Cure
- Prime over Steel, metal, weathered galvanized steel, aluminum, fiberglass, polyurethane foam and previously painted surfaces
- Fast recoat 1-2 hours at 75°F & 50% R.H
- Cures down to 18°F dry and apply to 140°F
- High heat resistance up to 400°F dry
- Single component, easy to use
-
E104 Primer Moisture Cured Urethane Zinc Rich Primer
- Excellent "wetting out" and adhesion to sound rusty steel
- Fast recoating within 4 hours at 75F
- Cures down to 25F on dry surfaces
- "Open" recoat window with proper cleaning
- Passed 1,500 hours in salt spray cabinet
-
E15M Epoxy Mastic Steel Primer DTM & Concrete Coating | Chemical Resistant | Low Temp 25F
- High solids DTM (direct-to-metal) chemical resistant steel primer or finish coat to steel and concrete
- Self priming to steel including tight rust
- Apply Vertical Surfaces to 8 mils DFT Steel & Concrete
- Great primer for use with our E1500HN (horizontal) and E555VN (vertical) Novolac Chemical Resistant Epoxies
- USDA Approved
-
E77 Fast Cure Epoxy Concrete Primer & Base Coat | 15 colors
- Ideal for a base coat for flake floors
- Good chemical, abrasion and impact resistance
- Outstanding adhesion and "wetting out" properties
- Used as a primer for pigmented polyurethanes
- Excellent as a primer for polyaspartics
-
EZ- Bond Primer | Excellent Adhesion & Corrosion Protection | Self- Leveling | Primer for Galvanized Metal, Aluminum Concrete, Drywall, Masonry, Fiberglass, Wood And Stucco
- Used on practically any surface
- Excellent Adhesion
- Corrosion Protection
- Self-Leveling Product
- Eco-Friendly Formula
-
H20 HyperPRIME Epoxy Quick Cure Bonding Primer | Low Temp 45°F | 3 Hr Recoat
- Excellent Substrate Penetration with superior adhesion 450 psi
- Quick Cure 3 Hour Recoat Time - great for 1 day floor coating systems
- Great for concrete, wood and metal surfaces
- Helps protect Against Coating Damage from Outgassing of Concrete
- Fantastic freeze/thaw stability (passes 3+ cycles; -5 C to 23 C)
-
Plugger Universal Acrylic Primer | Rust & Corrosion Resistant | For Metal, Concrete, Stucco, Masonry, Painted Surfaces
- Excellent Hide
- Rust Inhibiting and Corrosion Resistant for metal surfaces
- Fast Drying
- Interior and Exterior Uses
- Galvanized Metal and Aluminum Applications
-
Synthetic Shellac Primer Epoxy Fortified | Stain Odor & Tannin Blocker | Anti-Microbial | Wood, Drywall, Fiberglass, Stucco, Galvanized Metal
- Stops Tanin Bleed
- Stain Blocker
- Easy To Apply
- Blocks Smoke and Water Damage
- Resists Microbial Growth