concrete sealer
Showing 1–12 of 18 results
-
Advanced Waterproofer Multi-Surface 10 Yr Water Repellent
- Long lasting and virtually indestructible water repellent protection
- Penetrates deep and will not wear off with heavy vehicle or foot traffic
- Prevents growth of mold & mildew
- Does not change the appearance of the surface
- Stain resistant to oil, gas and anti-freeze
-
Aspartic 85 Polyaspartic Quick Cure Concrete Floor Coating | Low Temp 30°F
- Tough, durable topcoat for interior epoxy floor coatings
- Cold temperature application down to 30°F
- Excellent chemical and abrasion resistance
- UV Stable and will not yellow
- Beautiful high gloss appearance
-
Bio-Seal E907 Resin | High Heat Tolerance | Quick Return to Service
- Saturation Resin: For use with reinforcing fibers and fabrics to create composite repairs of tank tops, pipes or similar structures
- Pressure Transfer Compound: Very high compressive strength and modulus provides an excellent material for void and annulus filing of pipe sleeves, void spaces, etc.
- Penetrating Sealer: Use to seal and protect concrete, brick and other similar surfaces against chemical attack and water penetration
-
Blok-lok Silane Siloxane Vertical Wall Water Repellent | Concrete Brick Block Stucco
- Labor and material water repellent warranty available for 5 years
- Easy to use Concentrates available that saves money, time and easier on the environment!
- ASTM tested for superior performance in stopping water and salt damage
- 100% Eco-friendly: low VOC
- Excellent mold and mildew inhibitor
-
CLEAR-SEAL 100% Urethane Super Premium Sealer | High Gloss
- Excellent Impact and wear resistant
- Resists hot tire pick-up for vehicular applications
- Performance Additive Available for Even Better Performance
- Excellent Chemical and Stain Resistance
- Resists UV rays - won't yellow
-
CLEAR-SEAL 100% Urethane Super Premium Sealer| Low Gloss
- Excellent Impact and wear resistant
- Resists hot tire pick-up for vehicular applications
- Performance Additive Available for Even Better Performance
- Excellent Chemical and Stain Resistance
- Resists UV rays - won't yellow
-
CMW 8000 Lithium Moisture Vapor Barrier and Concrete Densifier
- Blocks moisture vapor and hydrostatic pressure reducer
- Used in joints to stop vapor/water pressure damage to joint materials
- Permanent - becomes part of the concrete
- Stops minute fracture weeping of moisture (may require several coats)
- In areas of high humidity and salt air - reduces corrosive activity to rebar within concrete
-
Concrete Sealer and Water Repellent Premium Grade Clear Protection
- Penetrates deep into the surface to help keep water out
- Great winterizing agent – Protects concrete from icing and salt infiltration
- Stain resistant to oil, gas and anti-freeze
- For All Vertical and Horizontal Unpainted Concrete Surfaces
- Tough, Durable Natural Looking Clear Finish Does Not Change Look of Surface
-
E101C Moisture Cured Urethane Clear Heavy Traffic Floor Sealer | Dustproofer | Prevents Spalling
- Great heavy duty stain resistant floor sealer for warehouse and other heavy use areas
- Excellent adhesion and sealer for concrete, wood and masonry surfaces.
- Extremely hard, yet flexible film.
- Outstanding “wearing properties
- Highly resistant to abrasion and impact.
-
E344QC Polyaspartic Quick Cure Concrete Floor Coating | 85% Solids
- Tough, durable topcoat for interior epoxy floor coatings
- Excellent chemical and abrasion resistance
- UV Stable and will not yellow
- Beautiful high gloss appearance
- Fast Curing for quick back in-service
-
E444X Polyaspartic High Gloss Concrete Floor Coating | 84% High Solids | Non-Yellowing | Low Odor
- Tough, durable topcoat for epoxy floor coatings
- Indoor and Outdoor Application
- Can be Applied Direct to Concrete
- High solids 84%
- Easy to work with 1:1 mix ratio
-
E449 Polyaspartic Fast Cure High Gloss Concrete Floor Coating | 95% High Solids
- Tough, durable topcoat for epoxy floor coatings
- High solids 95%
- Quick back in service 3-5 hours light foot traffic
- Can be applied up 12 mils thick one coat (125 sq'/gallon)
- Excellent chemical and abrasion resistance