Call Or Text
(630) 675-4509
Call Or Text
(630) 675-4509
Starting at $80.00
The Life Deck 1K Acrylic Urethane Blend Sealer is a clear and protective coating designed to protect decorative concrete and deck surfaces. This acrylic-urethane hybrid creates a durable finish with excellent resistant to staining, abrasion and every day wear.
Available in both Gloss and Satin finishes, this versatile sealer can be used on interior and exterior projects including pool decks, patios, walkways, concrete floors, pavers and wood surfaces. It is easy to clean finish helps repel oil, grease and water while providing added protection for coated surfaces.
Additionally, the Life Deck 1K sealer works great as a protective coat over the E10 Deck Coating and E28 Cool Life Deck Coating
Available in 1 Gallon & 5 gallon containers.
Primer: E10 Deck Coating and E28 Cool Life Deck Coating
Topcoat: None required.
WHERE IS LIFE DECK 1K ACRYLIC URETHANE BLEND SEALER USED?
WHY LIFE DECK 1K ACRYLIC URETHANE BLEND SEALER?
| Drying Time | (70°F, 50% RH) |
| Set to Touch | < 15 min |
| Tack- Free | < 20 min |
| Dry Hard | < 30 min |
| Pencil Hardness | <HB |
| Direct Impact | >160 |
| Reverse Impact | >160 |
| Taber Abrasion | 50.5mg |
| 60° Gloss (ASTM D-1308) | >90 |
| Contrast Ratio (ASTM 2805) | >90 |
| Dry Tape Test (ASTM D-3359) | 5A |
| Dry Scrape Adhesion (ASTM D-2197) | 9 kg |
| Wet Tape (24 hr/70°F) | 5A |
| Wet Tape (4 days/70°F) | 5A |
| QUV – “B Bulb” (1000 hr) (ASTM D-4587-91) |
>92% gloss retention, 1.6 Delta E color change |
| QUV – “B Bulb” (1000 hr) (ASTM D-4587-91) |
>92% gloss retention, 1.6 Delta E color change |
| Delta E Color Change | <2.0 |
COVERAGE RATE
Coverage will vary depending on the surface applied to. For best results apply two thin coats. The topcoat can be rolled, brushed or sprayed.
Smooth Surfaces: Up to 300 Square Feet Per Gallon
Rough Surfaces: 250 – 300 Square Feet Per Gallon
APPLICATION TEMPERATURE: Not recommended for application when the temperature is below 55°F. Rain may damage uncured products. If inclement weather threatens, cover the deck to protect new application. Do not allow any non-applied product to freeze.
| Hydraulic Fluid (24 hr/150°F) | Pass |
| Acid, 5% H2S)4 Spot, pH = 0.6 | No effect after 24 hr |
| Base, 5% NaOH Spot, pH=13.5 | No effect after 6 hr |
| Water Immersion (24 hr / 70F) | Pass |
| Gasoline (87) | OK |
| Diesel Fuel | OK |
| Brake Fuel | Dissolve |
| Skydrol | Softening* |
| Xylene | OK* |
| 10% Acetic Acid | OK |
| 10% HCL | OK |
| Methanol | OK* |
| Ammonia | OK |
| Gasoline (87) | OK |
| Diesel Fuel | OK |
| Brake Fuel | Dissolve |
| Skydrol | Dissolve |
| Xylene | OK* |
| 10% Acetic Acid | OK |
| 10% HCL | OK |
| Methanol | OK* |
| Ammonia | OK |
| (100F, 100% RH,700 hours) Blistering (ASTM D714) |
Few, #8 |
| Loss in Gloss | No Effect |
DIRECTIONS:
TEST AREA:
Apply a small amount of the material to an inconspicuous area to ensure proper appearance and adhesion.
APPLICATION SPECIFICS: IMPORTANT WEATHER GUIDELINES:
▪ Apply on warm, clear, sunny days.
▪ Do not apply under foggy conditions.
▪ Do not apply when rain is forecast within 24 hours.
▪ Do not apply if temperatures are expected to drop below 50°F within 24 hours.
▪ Apply 2 thin coats for best result (Use 1/4” or 3/8” nap roller cover)
APPLICATION:
Brush, roll or spray. DO NOT SHAKE. Shaking will cause air bubbles. Stir gently and thoroughly before application. This product
appears milky when wet and dries rapidly to a beautiful clear coating.
IMPORTANT:
Do not apply late in the day or when dew, rain, fog or mist is likely (moisture will damage the fresh paint film). Apply at
temperatures above 50°F. Do not apply if temperatures below 50°F are expected within 24 hours. Cold weather or excess humidity
or a sudden temperature drop will greatly affect any finish at the time of application. Dampness can dull the gloss. Do not paint in
direct sun. Use a clean brush or roller. For maximum durability, we recommend at least two thin coats.
DRYING TIME: Dries within 30 minutes and can be recoated in 4 hours. Ready for light pedestrian traffic in 12 hours. Ready for
normal pedestrian traffic in 24 hours. Do not place heavy objects (pots, barbecues, patio furniture, etc.) before 48 hours have
passed from end of application. Drying time will vary depending on weather conditions, air circulation, and temperature.
THINNING: Thinning is not recommended. CLEAN-UP: Clean tools and hands with warm soapy water and rinse thoroughly.
DISCLAIMER: All guidelines, recommendations, statements, and technical data contained herein are based on information and tests we believe to be reliable and
correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as a warranty, either expressed or implied. It is the user’s
responsibility to satisfy himself, by his own information and tests, to determine suitability of the product for his own intended use, application and job situation and
user assumes all risk and liability resulting from his use of the product. We do not suggest or guarantee that any hazards listed herein are the only ones that may exist.
Neither seller nor manufacturer shall be liable to the buyer or any third person for any injury, loss or damage directly or indirectly resulting from use of, or inability
to use, the product. Recommendations or statements, whether verbal or in writing, other than those contained herein shall not be binding upon the manufacturer,
unless in writing and signed by a corporate officer of the manufacturer. Technical and application information is provided for the purpose of establishing a general
profile of the material and proper application procedures. Test performance results were obtained in a controlled environment and LIFE PAINT makes no claim that
these tests or any other tests, accurately represent all environments.
Warranty: When the warranted product is applied in accordance with this technical data sheet, label instructions and common sense widely accepted painting
practice and procedures, Life Specialty Coatings will warrant said product against manufacturing defects that might cause premature failure such as blistering,
peeling, or unusual wear. Directions are as complete as possible but cannot encompass all conditions, applications, and/or surfaces beyond manufacturer’s control.
In the event of a warranted failure and upon the presentation of proof of purchase, the remedy will be the provision price for said product. This warranty does not
include labor or the costs associated with labor. This warranty may not be transferred or assigned and extends specific legal rights which may vary from state-tostate. No other warrantee is expressed or implied. Life Specialty Coatings Company, Santa Fe Springs, CA (562)944-6391
Call or text (630) 675-4509 or email [email protected].
Life Deck 1K Acrylic Urethane Blend Sealer is a crystal-clear acrylic urethane hybrid coating designed to provide a durable protective finish for concrete, wood, brick, patios, walkways, pool decks, balconies, and waterproof deck systems. It is available in gloss and satin finishes for both interior and exterior applications.
Life Deck 1K Sealer is designed for:
It is commonly used to protect decorative concrete and deck coatings from wear, staining, and weather exposure.
Yes. Life Deck Sealer is a popular choice for pool decks because it provides:
It also works well over decorative deck coatings like the E28 Cool Life Deck Coating and E10 Acrylic Deck Coating.
No. The coating is specifically designed as a non-yellowing acrylic urethane blend, helping maintain the appearance of decorative concrete, deck coatings, and masonry surfaces exposed to sunlight.
Yes. The Life Deck Sealer offers:
For more aggressive chemical resistance, reach out to us at 630-675-4509 or [email protected] and we can help with selecting the right product for your project.
Yes. Life Deck 1K Acrylic Urethane Blend Sealer is designed for both interior and exterior applications.
The product is available in:
This allows customers to choose either a higher shine “wet look” appearance or a softer satin finish depending on the project style.
Coverage depends on surface texture and porosity.
Typical coverage rates listed on the product page are:
For best performance, Exterior Performance Coatings recommends applying two thin coats.
The coating can be:
The product should be stirred gently before use and not shaken to avoid introducing bubbles into the coating. Two thin coats are recommended for maximum durability.
Exterior Performance Coatings recommends:
Weather conditions can affect gloss, cure speed, and final appearance.
The product page specifically recommends using Life Deck Sealer over:
It acts as a protective clear coat to improve durability and resistance to staining, moisture, and wear.
Life Deck uses an acrylic-urethane hybrid formula, which combines:
This makes it more durable than many standard acrylic-only concrete sealers.
For decorative concrete, pool decks, and patios, applying Life Deck 1K Sealer over coatings like E10 Deck Coating or E28 Cool Life Deck Coating can help extend coating life while improving stain resistance and cleanability in high-traffic outdoor areas.
