US SAWS DUAL COMPONENT 1 MAN POLYUREA / EPOXY JOINT FILLER PUMP
US Saws’ SX20550 Dual Component 1 Man Pump is designed to significantly reduce labor cost and increase speed with quick and efficient 1 man application of both polyurea and epoxy 2 component joint fillers on commercial and industrial floor projects. Offers significant increase in the speed of application where the alternative is applying by hand using a twin cartridge system allowing one person to control the position of the polymer pump with one hand while dispensing the joint filler with the other.
Each SX20100 comes with a replacement supply of (20) 1/2″ x 32 element static mixers designed to work with a wide variety of joint filler products. The joint filling machine constructed with a “T” handle, which allows left and right-handed operation. This “One Man Pump” enables other workers to handle different tasks while one person is filling concrete expansion joints.
The new design also makes it easier for the pump operator as he knows exactly where the pump should be and where it needs to go next — no more running over wet floor joints. Easier to use than other dual pump systems with its low profile, lightweight and 4 wheel quick turning design.The strapped-on waste bucket makes those little drips on the floor a thing of the past. The operator holds the mixing tip over the bucket while transporting the pump to get set up for his next run.
The SX20550 Dual Component Polyurea / Epoxy Joint Filler Pump has a 1/2HP motor and operates on 110V electric current (220 volt electric motor available). Also can be used on projects where electric power is not available through purchase of the US Saws’ deep cycle battery and power inverter. The SX20550 is simple to use and easy to maintain. Joint filler is applied through a long flexible hose and comes out through a removable static mixer for proper material mixing per mfg requirements.
The SX20550 works with 1:1 mix joint fillers and using an optional easy to change sprocket 2:1 mix joint fillers. The Dual Component Pump is powerful enough to work with both polyurea and epoxy joint filler material. Great for use with the ASTC Polymers 3003/3004 Polyurea Control Joint and 3246 Poylurea Expansion Joint Filler. It will also dispense many polyaspartic coatings, offering extremely quick application for larger floor projects where time is critical and labor budgets are tight.
US Saws offers the standard SX20100 model two man operation pump and the slimmer and even more labor efficient US Saws’ new SX20550 Dual Component 1 Man Pump offering one man operation. The SX20100 comes supplied with 20 static mixers (1/2″ x 32 element).
Typical joint filling team has 3-4 people for cleaning existing joints, filling joints, keeping product filled in machine and running machine to fill joints. For repairing and restoring existing joints average about 1,000 linear feet of joint repair/filling per day: In one 8 hour day typically spend 6 hours removing existing material and cleaning joints at an average 1’/minute rate and 2 hours filling joints at 10’/minute. For filling new joints with no existing joint filler can average as much as 5,000 linear feet per day cleaning and filling joints.
WHERE IS US SAWS DUAL COMPONENT SX-20550 ONE MAN PUMP USED?
- Large Joint Filling Floor Projects
- Polyurea Joint Filler projects
- Epoxy Joint Filler projects
- Application of Some Polyaspartic Coatings
WHY US SAWS SX-20550 PUMP?
- Reduced Labor Costs with newly redesigned, low profile one man operation
- Significantly Increase application Speed on Large Concrete Floor Projects
- Allows Quick Joint Filling vs Cartridge Application
- Fill up to 5,000 Lineal Feet of joints (new concrete) in one day!
- Left and right handed operation are easy with the double-sided “T” handle
- Works With Both Polyurea and Epoxy 2 Component Joint Fillers up to 5,000 CPS viscosity
- Easy to Use – Inexpensive to Maintain
- Twin 6.5 Gallon See Through Tanks Each Hold 5 Gallons Joint Filler
- Semi-Transparent Tanks Allow Operator to Monitor Liquid Level in Tanks
- Easy To Clean Polyethylene Tanks With Full Sized Lids for Unrestricted Access to Inside of Tanks
- Dispense 1:1 Ratio or 2:1 Ratio Product With Simple Sprocket Change (optional)
- Will Dispense Certain Polyaspartic Floor Coatings – Call For Details
- 1/2HP 110V Electric Motor with 0-6 GPM Variable Speed Flow Control on Dispensing Wan
- 220V optional 1/2 HP Electric Motor Available Special Order Lead Time for use outside North America
- Optional Deep Cycle Battery & Power Invertor for Cordless Operation
