2 part polyurea sealant
Showing all 10 results
-
800 Slow Set Polyurea Adhesive Sealant & Caulk
- Back in-service 1 - 1.5 hours, recoat 30-45 minutes, full cure 6-8 hours
- High chemical & fuel resistance
- Highly adhesive to many substrates
- Good working time, quick gel time 6-10 minutes, trowel-able
- Cartridge or pump dispensed
-
830 Fast Set Polyurea Repair | Joint Sealant | Caulk | Adhesive | No Sag Walls | Concrete | Steel | Wood
- Vertical hold directly from the cartridge or static mixer
- Can be sprayed over with polyurea in a short time
- High chemical resistance, fuel resistant,
- Highly adhesive to many substrates
- Cold weather application down to -20F
-
Dripless DC600 Dual Component Joint Filler Cartridge Gun 300ML x 300ML | Epoxy Polyurea
- Dual-Component twin cartridge gun
- Each cartridge holds either 11 oz /300 ml or 5.5 oz / 150 ml of product
- Handles both 1:1 (300 ml x 300 ml) or 2:1 (300 ml x 150 ml) mix ratio tube configuration
- Quickly Apply Polyurea, Epoxy, Urethane Products
- Easy Application Of our Polyurea repair products: 3246, 3004, 800, 830 and the Epoxy/Urethane E443
-
Newborn 435-XSP Dual Component Cartridge Gun 300ml x 300ml | 300 ml x 150 ml
- Dual-Component Applicator For 10.5 Oz / 300ml Twin Cartridges In 1:1 Or 2:1 Mix Ratio 300 ml x 150 ml
- Quick Application Of Polyurea, Epoxy, Urethane Based Products
- Easy Application Of Our’ Twin Cartridge Polyurea Products 3246, 3004, 4034, 830, E5830
- Thrust Ratio Of 26:1 For Use With Very High Viscosity Materials
- Two-piece stamped steel friction plate
-
Newborn 515-SP Vertical Dual Component Applicator Cartridge Gun
- Manual, Smooth Rod
- 20:1 Thrust Ratio
- 3.9 lbs / unit
- Variable Mix Ratios
- Cuts the spout of caulk tubes
-
Newborn 535-XSP Professional Dual Component Cartridge Gun 300ml, 150ml, 75ml
- Dual-Component Gun 10 oz/300ml Cartridge 1:1 ratio
- Multi-Ratio Easily Converts in just seconds with Snap In/Snap Out Push Disks for 300ml, 150ml 75 ml cartridges
- Quickly Apply Polyurea, Epoxy, Urethane Products
- Easy Application Of Twin Cartridge Polyurea's 3246, 3004, 4034, 830 made by ASTC Polymers
- Thrust Ratio 26:1 For Very High Viscosity Materials
-
Newborn 830A30 Pnuematic Dual Component Cartridge Gun 300ml, 150ml, 75ml
- Dual-Component Pneumatic Gun 10.5 oz/300ml Cartridges 1:1 ratio
- 2.5" cylinder generates 490 lbs nominal thrust at @100 psi
- Offers quick application with smooth, even product flow
- Multi-Ratio Easily Converts in just seconds with Snap In/Snap Out Push Disks for 300ml, 150ml 75 ml cartridges
- Quickly Apply Polyurea, Epoxy, Urethane Products
-
Newborn 850A30 HD Pnuematic Dual Component Cartridge Gun 300ml, 150ml, 75ml
- Dual-Component Pneumatic Gun 10 oz/300ml Cartridges 1:1 ratio
- Powerful 4" cylinder generates nominal 1,100 lbs thrust @100 psi
- Offers quick application with smooth, even product flow
- Multi-Ratio Easily Converts in just seconds with Snap In/Snap Out Push Disks for 300ml, 150ml 75 ml cartridges
- Quickly Apply Polyurea, Epoxy, Urethane Products
-
SX20150 US SAWS Dual Component 2 Man Polyurea / Epoxy Joint Filler Pump
- Reduce Labor Costs & Significantly Increase Application Speed on Concrete Floor Projects
- Reduce Material Waste With More Controlled Material Flow
- The dispensing wand has a variable speed control, and start/stop control
- Production rates to 5,000 lineal joint filling feet per day (new concrete)
- Allows Quick Joint Filling vs Cartridge Application
-
SX20552 US SAWS Dual Component 1 Man Polyurea / Epoxy Joint Filler Pump
- Reduced Labor Costs with newly redesigned, low profile one man operation
- Significantly Increase application Speed on Large Concrete Floor Projects
- Allows Quick Joint Filling vs Cartridge Application
- Fill up to 5,000 Lineal Feet of joints (new concrete) in one day!
- Left and right handed operation are easy with the double-sided “T” handle