Polyurea Control Joints
Showing 1–12 of 15 results
-

10x Polyurea Interior Control Joint Filler | Quick Cure | Cold Temperature Apply Down To 0F
- Quick Back in Service
- Ideal for High Speed Application using Machine Dispensing System or for small projects easy application using twin cartridge kits and 300 ml x 300 ml cartridge kits
- High Shore Hardness for superior protection and support to joint edges
- Cold Application down to 0F
- Rapid curing
-

3003 Polyurea Slow Set Interior Control Joint Filler | Low Temp -20°F
- Offers load transfer across control joints for good protection of edges
- Back-in-Service "Drive-Over" in 30 to 60 minutes
- Longer working time than the 3004 Fast Set Polyurea
- 5-8 Minute Gel Time @ 77°F
- Meets USDA Requirements for incidental food contact
-

3004 Polyurea Fast Set Interior Control Joint Filler | Low Temp -20°F
- Quick Back-in-Service "Drive-Over" in only 20-30 minutes
- Offers load transfer across control joints for good protection of edges
- Ideal for High Speed Application using Machine Dispensing System or for small projects easy application using twin cartridge kits and 300 ml x 300 ml cartridge kits (total 21 oz or 600 ml per cartridge kit)
- Tack Free only 2-3 minutes
- Meets USDA Requirements for incidental food contact
-

SX-20005-5 Polyethylene Tank 6.5 Gallons for US SAWS Polyurea Joint Fi
- Reduce Labor Costs & Significantly Increase Application Speed
- Production rates of up to 4,000 to 7,000 lineal feet per day
- Reduce Material Waste
- Allows Quick Joint Filling vs Cartridge Application
- Works With Both Polyurea and Epoxy 2 Part Joint Fillers
-

SX-20005-6 Polyethylene Tank Cover 6.5 Gallon for US SAWS Polyurea Joi
- Reduce Labor Costs & Significantly Increase Application Speed
- Production rates of up to 4,000 to 7,000 lineal feet per day
- Reduce Material Waste
- Allows Quick Joint Filling vs Cartridge Application
- Works With Both Polyurea and Epoxy 2 Part Joint Fillers
-

SX-20017 Tank Warmers For Cold Weather for US SAWS Polyurea Joint Fill
- Reduce Labor Costs & Significantly Increase Application Speed
- Production rates of up to 4,000 to 7,000 lineal feet per day
- Reduce Material Waste
- Allows Quick Joint Filling vs Cartridge Application
- Works With Both Polyurea and Epoxy 2 Part Joint Fillers
-

SX-20111 Static Mixer Retaining Nut (5) & Manifold Thread (1) US SAWS
- Reduce Labor Costs & Significantly Increase Application Speed
- Production rates of up to 4,000 to 7,000 lineal feet per day
- Reduce Material Waste
- Allows Quick Joint Filling vs Cartridge Application
- Works With Both Polyurea and Epoxy 2 Part Joint Fillers
-

SX-20111 Static Mixer Retaining Nut for US SAWS Polyurea Joint Filler Pump
- Reduce Labor Costs & Significantly Increase Application Speed
- Production rates of up to 4,000 to 7,000 lineal feet per day
- Reduce Material Waste
- Allows Quick Joint Filling vs Cartridge Application
- Works With Both Polyurea and Epoxy 2 Part Joint Fillers
-

SX-20116 Manifold With Grease Fittings for US SAWS Polyurea Joint Fill
- Reduce Labor Costs & Significantly Increase Application Speed
- Production rates of up to 4,000 to 7,000 lineal feet per day
- Reduce Material Waste
- Allows Quick Joint Filling vs Cartridge Application
- Works With Both Polyurea and Epoxy 2 Part Joint Fillers
-

SX-20201 Replacement Pump for US SAWS Polyurea Joint Filler Pumps
- Reduce Labor Costs & Significantly Increase Application Speed
- Production rates of up to 4,000 to 7,000 lineal feet per day
- Reduce Material Waste
- Allows Quick Joint Filling vs Cartridge Application
- Works With Both Polyurea and Epoxy 2 Part Joint Fillers
-

SX-21000 Polyurea Pump 2:1 Ratio Conversion Kit for US SAWS Polyurea J
- Reduce Labor Costs & Significantly Increase Application Speed
- Production rates of up to 4,000 to 7,000 lineal feet per day
- Reduce Material Waste
- Allows Quick Joint Filling vs Cartridge Application
- Works With Both Polyurea and Epoxy 2 Part Joint Fillers
-

SX-21023 Power Inverter 1200W for US SAWS Polyurea Joint Filler Pumps
- Reduce Labor Costs & Significantly Increase Application Speed
- Production rates of up to 4,000 to 7,000 lineal feet per day
- Reduce Material Waste
- Allows Quick Joint Filling vs Cartridge Application
- Works With Both Polyurea and Epoxy 2 Part Joint Fillers
