Call Or Text
(630) 675-4509

Sign Up / Login
0 $0.00

Call Or Text
(630) 675-4509

SF Clear mil Window Film Safety & Security

SF Clear 12 Mil I Window Film | Safety & Security | Interior

Starting at $199.50

  • Increased protection from glass shattered by impact, blast, crime or natural disaster
  • Superb optical clarity for no compromise vision
  • Up to 99% UV block to reduce fading and sun damage
Calculate Square Footage

Overview

  • Description
  • Additional Information
  • Specs
  • Application
  • Calculator
  • More Options

SF Clear 12 Mil I Window Film | Safety & Security | Interior

SF Clear safety and security interior window films feature exceptional clarity, low reflectance and high levels of UV protection.

SF Clear 12 Mil I safety and security interior window film features exceptional clarity, low reflectance and high levels of UV protection. SF Clear 12 Mil I provides increased protection from glass shattered by impact, blast, crime or natural disaster with up to 99% UV block to reduce fading and sun damage.

Please see Application tab for detailed application instructions, our Video tab.

Available in  25′, 50′, 75′ & 100′ long increments, it also has available widths of 36″, 48″, 60″ & 72″. To save you time cutting film, custom widths cut to order are available. To do so, simply order the next largest width listed (ex: you need a width of 32″, then order 36″ and you will receive a roll cut to 32″ wide and a 2nd piece 4″ wide).  Please specify the requested width(s) in the “Order Notes” section at the bottom left side of the checkout page.  Can specify up to 3 cuts in width per roll.

 

WHERE IS SAFETY & SECURTIY FILM USED?

  • Office Buildings
  • Meeting Rooms
  • Home windows
  • Churches
  • Patio Doors
  • Bus Shelters
  • Subways
  • Buses
  • Trains
  • Stadiums
  • Commercial Buildings
  • Restaurants
  • Schools
  • Store Fronts

WHY SAFETY & SECURITY FILM?

  • Increased protection from glass shattered by impact, blast, crime or natural disaster
  • Superb optical clarity for no compromise vision
  • Up to 99% UV block to reduce fading and sun damage
Weight 20 lbs
Dimensions 72 × 9 × 9 in
Color

Surface Applied To

Manufacturer

Width

36", 48", 60", 72"
Length

25', 50', 75', 100'

Specifications

Optical & Solar Properties  SF Clear 12 Mil i
Item Number R32303T
Pane Single
Visible Light Transmitted 87%
Visible Light Reflected (Interior) 11%
Visible Light Reflected (Exterior) 11%
Ultra Violet Black 99%
Total Solar Energy Reflected 10%
Total Solar Energy Transmitted 78%
Total Solar Energy Absorbed 12%
Glare Reduction 3%
Shading Coefficient 0.94
Solar Heat Gain Coeff. (G-Value) 0.82
U-Value Winter (IP) 1.07
U-Value Winter (SI ) 6.07
Total Solar Energy Rejected (%) 18%

Mechanical Properties 

Thickness 12 mil
Tensile Strength at Break 28,500 PSI
Break Strength 336  lb/ inch
Elongation at Break 125%
Peel Strength 7 lb / inch

Safety Testing 

Impact 
EN 356 P4A X
DIN 52290 Part 4, A1 X

Bomb Blast 

 X
Siach Gefen IDF Testing (x2 + No Bar) X
Bomb Blast GSA Level D (10.2psi, 90.6 psi/msec) X
UL 972 Burgulary Resisting Glazing Material (3A)X2 + No Bar on Both Sides X

Wind Debris 

 X
ASTM E330 X
TAS 201, 202, 203, Florida Building Code (Dade County Small Missile Test) Hurricane X

**Performance results are calculated on 3mm glass using NFRC methodology and LBNL Windows 5.2 software and are subject to variation in process conditions within industry standards are are only intended for estimating purposes

How to Measure

Determining the amount of window film needed to cover your windows is not as difficult as one would imagine. Just follow these straightforward steps to easily measure your windows and determine the quantity needed.

Measuring Your Glass

Note: Measure width in INCHES and length in FEET (divide number of inches by 12 to convert to feet.)

  1. Measure only glass area of window, not entire window frame.
  2. First measure your glass from left to right in INCHES. This is your required width. (This width corresponds with the “Roll Width” listed on each product page.)
  3. Then Measure your glass from top to bottom in FEET. This will be your required length. (This length corresponds with “Total Length (Feet)” on each product page.)
  4. Be sure to write these measurements down. We suggest adding 1 inch in each direction to your measurements. This allows room for error and cutting during your installation. The slight overlap will allow you to carefully cut the film to the edge of your glass, custom fitting your window.
  5. Repeat measuring for each window.
  6. Add together the lengths for all of your windows to come up with Total Length of film required in FEET.

Ordering Your Window Film

  1. Navigate to the page of the desired film. Select the width in INCHES that best fits your windows as determined by the previous steps.
  2. Your Total Length measurement (length of all windows combined in FEET) equals the quantity needed in feet of your chosen film. Ships as one continuous roll

How to Apply

Below we have listed the General Application Instructions. For additional information, including cleaning & maintenance of your film, please visit our Document Library

Fullscreen Mode

Square Footage Calculator

Estimate the Right Amount for Your Project

Use the calculator to determine your total project square footage. Once you have your measurements, compare the result to the product coverage rate listed on this page to estimate how much material you'll need for complete coverage.

Calculate Coverage
Quickly determine the total square footage of your project area.

Estimate Product Quantity
Use your results to calculate how much product your project requires.

Plan With Confidence
Add a waste percentage to account for surface texture and application conditions.

Coverage estimates are provided as a general guide. Actual product usage may vary based on surface condition, porosity, application method, and project requirements.

Square Feet 0 ft²

You may also like…