APPLICATION INSTRUCTIONS FOLLOW THESE SIMPLE APPLICATION STEPS
Preparation
• Cover nearby plants, grass, and surrounding surfaces using plastic sheeting
• Wear appropriate full PPE during application
• Test a small inconspicuous area before full application
Mixing
EXPERT Wood Stripper Pro may be adjusted to different consistencies depending on application method:
• Gel / Paste consistency: Mix with drill mixer on high speed for approximately 1 minute until thickened
• Sprayer application: Mix briefly (about 10 seconds)
• If mixture becomes too thick, allow product to rest 30 minutes to thin naturally
Application
Apply using:
• Brush
• Roller
• Sprayer (remove filters if spraying)
For best performance:
• Apply between 50°F and 100°F
• Lower temperatures increase dwell time
• Multiple spray applications may be required for heavy coatings
Dwell Time
Allow product to dwell 30 minutes to several hours depending on coating thickness.
• Product must remain wet while working
• In direct sunlight, cover with plastic to prevent premature drying
• Test periodically by scraping to determine when coatings release easily
Removal
Once coatings lift:
• Remove with pressure washer or scraper
• Work from bottom upward
• Use approximately a 45° spray angle when pressure washing
Some surfaces may require:
• A second application
• Light brushing with a wire brush while surface is still wet
Rinse & Clean-Up
• Rinse surface and surrounding areas thoroughly with water
• Collect removed coatings and dispose according to local regulations
• Do not rinse waste into soil, drains, or waterways
• Clean all tools and equipment with soap and water immediately after use
Warnings
Always wear PPE when using product including:
• Chemical-resistant gloves
• Long sleeves and long pants
• Closed-toe footwear
• Protective spray suit or coveralls
• Head covering
• NIOSH-approved respirator
Use only outdoors or in well-ventilated environments. Wash skin thoroughly after handling and launder contaminated clothing separately.
Lead Paint Warning
Structures built before 1978 may contain lead-based paint. Disturbing these coatings can release hazardous lead dust.
Follow EPA guidelines before beginning restoration projects involving older structures.
First Aid
If inhaled: Move to fresh air and seek medical attention if irritation persists.
If swallowed: Do not induce vomiting. Call poison control immediately.
If on skin: Rinse with water for at least 15 minutes and remove contaminated clothing.
If in eyes: Rinse continuously for 15–20 minutes and seek medical attention if irritation persists.
NOTICE TO BUYER: DISCLAIMER OF WARRANTIES AND LIMITATIONS ON OUR LIABILITY We warrant that our products are manufactured to strict quality assurance specifications and that the information supplied by us is accurate to the best of our knowledge. Such information supplied about our products is not a representation or a warranty. It is supplied on the condition that you shall make your own tests to determine the suitability of our product for your particular purpose. Any use or application other than recommended herein is the sole responsibility of the user. Listed physical properties are typical and should not be construed as specifications. NO WARRANTY IS MADE, EXPRESSED OR IMPLIED, REGARDING SUCH OTHER INFORMATION, THE DATA ON WHICH IT IS BASED, OR THE RESULTS YOU WILL OBTAIN FROM ITS USE. N0 WARRANTY IS MADE, EXPRESSED OR IMPLIED, THAT OUR PRODUCT SHALL BE MERCHANTABLE OR THAT OUR PRODUCT SHALL BE FIT FOR ANY PARTICULAR PURPOSE. NO WARRANTY IS MADE THAT THE USE OF SUCH INFORMATION OR OUR PRODUCT WILL NOT INFRINGE UPON ANY PATENT. We shall have no liability for incidental or consequential damages, direct or indirect. Our liability is limited to the net selling price of our product or the replacement of our product, at our option. Acceptance of delivery of our product means that you have accepted the terms of this warranty whether or not purchase orders or other documents state terms that vary from this warranty. No representative is authorized to make any representation or warranty or assume any other liability on our behalf with any sale of our products. Our products contain chemicals that may CAUSE SERIOUS PHYSICAL INJURY. BEFORE USING, READ THE MATERIAL SAFETY DATA SHEET AND FOLLOW ALL PRECAUTIONS TO PREVENT BODILY HARM.
