concrete clear sealer
Showing all 9 results
-
5500 Polyaspartic Polyurea Coating Roll Down Low Temp 30°F | 87% Solid
- Beautiful Clear Appearance
- Quick recoat time in as little as 1 – 1.5 hours
- Waterproofing Elastomeric Systems
- Good In Submerged Service Projects Like Fountains
- Works well on concrete, brick, steel, wood, fiberglass
-
5500HS 100% Solids Polyaspartic Polyurea Coating Roll Down | Low Temp 30°F | Flexible 120% Elongation | 1:2 Mix Ratio | 1 Coat Coverage
- Beautiful Clear HIGH GLOSS Appearance
- 100% Solids For Thick 1 Coat Coverage Full Flake, Quartz, Silica Sand Systems to 16 mils DFT (100 sq'/gallon)
- Quick 24 hour back in-service (at 75F)
- Waterproofing Elastomeric Systems
- Good In Submerged Service Projects Like Fountains
-
5500M Matte Finish Polyaspartic Polyurea Coating Roll Down | Low Temp 30°F | 89% Solids | Flexible 120% Elongation
- Beautiful Clear MATTE FINISH Appearance
- Quick recoat time in as little as 1 – 1.5 hours and 24 hour back in-service (at 75F)
- Waterproofing Elastomeric Systems
- Good In Submerged Service Projects Like Fountains
- Outstanding Chemical Resistant
-
E101C Moisture Cured Urethane Clear Heavy Traffic Floor Sealer | Dustproofer | Prevents Spalling
- Great heavy duty stain resistant floor sealer for warehouse and other heavy use areas
- Excellent adhesion and sealer for concrete, wood and masonry surfaces.
- Extremely hard, yet flexible film.
- Outstanding “wearing properties
- Highly resistant to abrasion and impact.
-
E155CL Damp Condition Clear Epoxy Primer | Moisture Tolerant | Quick Cure | Low Temp 45° | Flexible
- May be Applied to Damp or Moist Concrete Surfaces
- Excellent as a tough, flexible and clear concrete primer and sealer
- When used as clear Concrete Sealer has very low permeability to keep water and chemicals out while reducing concrete dusting, spalling and deterioration
- Excellent Adhesion to Concrete
- Excellent Primer for use with high performance coating systems
-
E5030CL Urethane Clear Sealer / Topcoat WB
- Attractive, clear aliphatic non yellowing finish
- Versatile product good on concrete and masonry surfaces
- Recoat only 1-2 hours & light foot traffic 2-4 hours
- Extended 24 hour pot life
- Excellent abrasion resistance (Taber Abrasor test only 10 mg loss)
-
H20 zioTHANE Low Gloss Urethane Concrete Floor Sealer / Topcoat
- Tough, durable topcoat for epoxy floor coatings
- Excellent chemical and abrasion resistance
- Exceptional impact resistance
- Aliphatic, UV Stable and will not yellow
- Beautiful clear, low gloss appearance
-
H20 ZioTHANE Semi-Gloss Urethane Concrete Floor Sealer/Topcoat
- Tough, durable topcoat for epoxy floor coatings
- Excellent chemical and abrasion resistance
- Exceptional impact resistance
- Aliphatic, UV Stable and will not yellow
- Beautiful clear, semi-gloss appearance
-
P3 Protect Clear Concrete Sealer | Moisture, Salt, Freeze Thaw, Stain Protection | Fast Easy Application | Lifetime Performance
- Uses Colloidal Silica Nano Technology For Superior Performance With Lifetime Improvement in Durability & Protection
- Great for driveways, parking lots, sidewalks, patios and porches subject to harsh winter and salt conditions
- Outstanding Clear Protection with No Change in Surface Appearance
- Deep Penetration Below the Surface - never wears off
- Protect Concrete From Road Salts and Surface Contamination with 42% improvement ASTM C1556